| /* |
| * (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved. |
| * |
| * Parts of this file were based on sources as follows: |
| * |
| * Copyright (c) 2006-2008 Intel Corporation |
| * Copyright (c) 2007 Dave Airlie <airlied@linux.ie> |
| * Copyright (C) 2011 Texas Instruments |
| * |
| * This program is free software and is provided to you under the terms of the |
| * GNU General Public License version 2 as published by the Free Software |
| * Foundation, and any use by you of this program is subject to the terms of |
| * such GNU licence. |
| * |
| */ |
| |
| #include <linux/amba/clcd-regs.h> |
| #include <linux/clk.h> |
| #include <linux/version.h> |
| #include <linux/dma-buf.h> |
| #include <linux/of_graph.h> |
| |
| #include <drm/drmP.h> |
| #include <drm/drm_panel.h> |
| #include <drm/drm_gem_cma_helper.h> |
| #include <drm/drm_gem_framebuffer_helper.h> |
| #include <drm/drm_fb_cma_helper.h> |
| |
| #include "pl111_drm.h" |
| |
| irqreturn_t pl111_irq(int irq, void *data) |
| { |
| struct pl111_drm_dev_private *priv = data; |
| u32 irq_stat; |
| irqreturn_t status = IRQ_NONE; |
| |
| irq_stat = readl(priv->regs + CLCD_PL111_MIS); |
| |
| if (!irq_stat) |
| return IRQ_NONE; |
| |
| if (irq_stat & CLCD_IRQ_NEXTBASE_UPDATE) { |
| drm_crtc_handle_vblank(&priv->pipe.crtc); |
| |
| status = IRQ_HANDLED; |
| } |
| |
| /* Clear the interrupt once done */ |
| writel(irq_stat, priv->regs + CLCD_PL111_ICR); |
| |
| return status; |
| } |
| |
| static int pl111_display_check(struct drm_simple_display_pipe *pipe, |
| struct drm_plane_state *pstate, |
| struct drm_crtc_state *cstate) |
| { |
| const struct drm_display_mode *mode = &cstate->mode; |
| struct drm_framebuffer *old_fb = pipe->plane.state->fb; |
| struct drm_framebuffer *fb = pstate->fb; |
| |
| if (mode->hdisplay % 16) |
| return -EINVAL; |
| |
| if (fb) { |
| u32 offset = drm_fb_cma_get_gem_addr(fb, pstate, 0); |
| |
| /* FB base address must be dword aligned. */ |
| if (offset & 3) |
| return -EINVAL; |
| |
| /* There's no pitch register -- the mode's hdisplay |
| * controls it. |
| */ |
| if (fb->pitches[0] != mode->hdisplay * fb->format->cpp[0]) |
| return -EINVAL; |
| |
| /* We can't change the FB format in a flicker-free |
| * manner (and only update it during CRTC enable). |
| */ |
| if (old_fb && old_fb->format != fb->format) |
| cstate->mode_changed = true; |
| } |
| |
| return 0; |
| } |
| |
| static void pl111_display_enable(struct drm_simple_display_pipe *pipe, |
| struct drm_crtc_state *cstate) |
| { |
| struct drm_crtc *crtc = &pipe->crtc; |
| struct drm_plane *plane = &pipe->plane; |
| struct drm_device *drm = crtc->dev; |
| struct pl111_drm_dev_private *priv = drm->dev_private; |
| const struct drm_display_mode *mode = &cstate->mode; |
| struct drm_framebuffer *fb = plane->state->fb; |
| struct drm_connector *connector = &priv->connector.connector; |
| u32 cntl; |
| u32 ppl, hsw, hfp, hbp; |
| u32 lpp, vsw, vfp, vbp; |
| u32 cpl, tim2; |
| int ret; |
| |
| ret = clk_set_rate(priv->clk, mode->clock * 1000); |
| if (ret) { |
| dev_err(drm->dev, |
| "Failed to set pixel clock rate to %d: %d\n", |
| mode->clock * 1000, ret); |
| } |
| |
| clk_prepare_enable(priv->clk); |
| |
| ppl = (mode->hdisplay / 16) - 1; |
| hsw = mode->hsync_end - mode->hsync_start - 1; |
| hfp = mode->hsync_start - mode->hdisplay - 1; |
| hbp = mode->htotal - mode->hsync_end - 1; |
| |
| lpp = mode->vdisplay - 1; |
| vsw = mode->vsync_end - mode->vsync_start - 1; |
| vfp = mode->vsync_start - mode->vdisplay; |
| vbp = mode->vtotal - mode->vsync_end; |
| |
| cpl = mode->hdisplay - 1; |
| |
| writel((ppl << 2) | |
| (hsw << 8) | |
| (hfp << 16) | |
| (hbp << 24), |
| priv->regs + CLCD_TIM0); |
| writel(lpp | |
| (vsw << 10) | |
| (vfp << 16) | |
| (vbp << 24), |
| priv->regs + CLCD_TIM1); |
| |
| spin_lock(&priv->tim2_lock); |
| |
| tim2 = readl(priv->regs + CLCD_TIM2); |
| tim2 &= (TIM2_BCD | TIM2_PCD_LO_MASK | TIM2_PCD_HI_MASK); |
| |
| if (mode->flags & DRM_MODE_FLAG_NHSYNC) |
| tim2 |= TIM2_IHS; |
| |
| if (mode->flags & DRM_MODE_FLAG_NVSYNC) |
| tim2 |= TIM2_IVS; |
| |
| if (connector->display_info.bus_flags & DRM_BUS_FLAG_DE_LOW) |
| tim2 |= TIM2_IOE; |
| |
| if (connector->display_info.bus_flags & DRM_BUS_FLAG_PIXDATA_NEGEDGE) |
| tim2 |= TIM2_IPC; |
| |
| tim2 |= cpl << 16; |
| writel(tim2, priv->regs + CLCD_TIM2); |
| spin_unlock(&priv->tim2_lock); |
| |
| writel(0, priv->regs + CLCD_TIM3); |
| |
| drm_panel_prepare(priv->connector.panel); |
| |
| /* Enable and Power Up */ |
| cntl = CNTL_LCDEN | CNTL_LCDTFT | CNTL_LCDPWR | CNTL_LCDVCOMP(1); |
| |
| /* Note that the the hardware's format reader takes 'r' from |
| * the low bit, while DRM formats list channels from high bit |
| * to low bit as you read left to right. |
| */ |
| switch (fb->format->format) { |
| case DRM_FORMAT_ABGR8888: |
| case DRM_FORMAT_XBGR8888: |
| cntl |= CNTL_LCDBPP24; |
| break; |
| case DRM_FORMAT_ARGB8888: |
| case DRM_FORMAT_XRGB8888: |
| cntl |= CNTL_LCDBPP24 | CNTL_BGR; |
| break; |
| case DRM_FORMAT_BGR565: |
| cntl |= CNTL_LCDBPP16_565; |
| break; |
| case DRM_FORMAT_RGB565: |
| cntl |= CNTL_LCDBPP16_565 | CNTL_BGR; |
| break; |
| case DRM_FORMAT_ABGR1555: |
| case DRM_FORMAT_XBGR1555: |
| cntl |= CNTL_LCDBPP16; |
| break; |
| case DRM_FORMAT_ARGB1555: |
| case DRM_FORMAT_XRGB1555: |
| cntl |= CNTL_LCDBPP16 | CNTL_BGR; |
| break; |
| case DRM_FORMAT_ABGR4444: |
| case DRM_FORMAT_XBGR4444: |
| cntl |= CNTL_LCDBPP16_444; |
| break; |
| case DRM_FORMAT_ARGB4444: |
| case DRM_FORMAT_XRGB4444: |
| cntl |= CNTL_LCDBPP16_444 | CNTL_BGR; |
| break; |
| default: |
| WARN_ONCE(true, "Unknown FB format 0x%08x\n", |
| fb->format->format); |
| break; |
| } |
| |
| writel(cntl, priv->regs + CLCD_PL111_CNTL); |
| |
| drm_panel_enable(priv->connector.panel); |
| |
| drm_crtc_vblank_on(crtc); |
| } |
| |
| void pl111_display_disable(struct drm_simple_display_pipe *pipe) |
| { |
| struct drm_crtc *crtc = &pipe->crtc; |
| struct drm_device *drm = crtc->dev; |
| struct pl111_drm_dev_private *priv = drm->dev_private; |
| |
| drm_crtc_vblank_off(crtc); |
| |
| drm_panel_disable(priv->connector.panel); |
| |
| /* Disable and Power Down */ |
| writel(0, priv->regs + CLCD_PL111_CNTL); |
| |
| drm_panel_unprepare(priv->connector.panel); |
| |
| clk_disable_unprepare(priv->clk); |
| } |
| |
| static void pl111_display_update(struct drm_simple_display_pipe *pipe, |
| struct drm_plane_state *old_pstate) |
| { |
| struct drm_crtc *crtc = &pipe->crtc; |
| struct drm_device *drm = crtc->dev; |
| struct pl111_drm_dev_private *priv = drm->dev_private; |
| struct drm_pending_vblank_event *event = crtc->state->event; |
| struct drm_plane *plane = &pipe->plane; |
| struct drm_plane_state *pstate = plane->state; |
| struct drm_framebuffer *fb = pstate->fb; |
| |
| if (fb) { |
| u32 addr = drm_fb_cma_get_gem_addr(fb, pstate, 0); |
| |
| writel(addr, priv->regs + CLCD_UBAS); |
| } |
| |
| if (event) { |
| crtc->state->event = NULL; |
| |
| spin_lock_irq(&crtc->dev->event_lock); |
| if (crtc->state->active && drm_crtc_vblank_get(crtc) == 0) |
| drm_crtc_arm_vblank_event(crtc, event); |
| else |
| drm_crtc_send_vblank_event(crtc, event); |
| spin_unlock_irq(&crtc->dev->event_lock); |
| } |
| } |
| |
| int pl111_enable_vblank(struct drm_device *drm, unsigned int crtc) |
| { |
| struct pl111_drm_dev_private *priv = drm->dev_private; |
| |
| writel(CLCD_IRQ_NEXTBASE_UPDATE, priv->regs + CLCD_PL111_IENB); |
| |
| return 0; |
| } |
| |
| void pl111_disable_vblank(struct drm_device *drm, unsigned int crtc) |
| { |
| struct pl111_drm_dev_private *priv = drm->dev_private; |
| |
| writel(0, priv->regs + CLCD_PL111_IENB); |
| } |
| |
| static int pl111_display_prepare_fb(struct drm_simple_display_pipe *pipe, |
| struct drm_plane_state *plane_state) |
| { |
| return drm_gem_fb_prepare_fb(&pipe->plane, plane_state); |
| } |
| |
| static const struct drm_simple_display_pipe_funcs pl111_display_funcs = { |
| .check = pl111_display_check, |
| .enable = pl111_display_enable, |
| .disable = pl111_display_disable, |
| .update = pl111_display_update, |
| .prepare_fb = pl111_display_prepare_fb, |
| }; |
| |
| static int pl111_clk_div_choose_div(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate, bool set_parent) |
| { |
| int best_div = 1, div; |
| struct clk_hw *parent = clk_hw_get_parent(hw); |
| unsigned long best_prate = 0; |
| unsigned long best_diff = ~0ul; |
| int max_div = (1 << (TIM2_PCD_LO_BITS + TIM2_PCD_HI_BITS)) - 1; |
| |
| for (div = 1; div < max_div; div++) { |
| unsigned long this_prate, div_rate, diff; |
| |
| if (set_parent) |
| this_prate = clk_hw_round_rate(parent, rate * div); |
| else |
| this_prate = *prate; |
| div_rate = DIV_ROUND_UP_ULL(this_prate, div); |
| diff = abs(rate - div_rate); |
| |
| if (diff < best_diff) { |
| best_div = div; |
| best_diff = diff; |
| best_prate = this_prate; |
| } |
| } |
| |
| *prate = best_prate; |
| return best_div; |
| } |
| |
| static long pl111_clk_div_round_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long *prate) |
| { |
| int div = pl111_clk_div_choose_div(hw, rate, prate, true); |
| |
| return DIV_ROUND_UP_ULL(*prate, div); |
| } |
| |
| static unsigned long pl111_clk_div_recalc_rate(struct clk_hw *hw, |
| unsigned long prate) |
| { |
| struct pl111_drm_dev_private *priv = |
| container_of(hw, struct pl111_drm_dev_private, clk_div); |
| u32 tim2 = readl(priv->regs + CLCD_TIM2); |
| int div; |
| |
| if (tim2 & TIM2_BCD) |
| return prate; |
| |
| div = tim2 & TIM2_PCD_LO_MASK; |
| div |= (tim2 & TIM2_PCD_HI_MASK) >> |
| (TIM2_PCD_HI_SHIFT - TIM2_PCD_LO_BITS); |
| div += 2; |
| |
| return DIV_ROUND_UP_ULL(prate, div); |
| } |
| |
| static int pl111_clk_div_set_rate(struct clk_hw *hw, unsigned long rate, |
| unsigned long prate) |
| { |
| struct pl111_drm_dev_private *priv = |
| container_of(hw, struct pl111_drm_dev_private, clk_div); |
| int div = pl111_clk_div_choose_div(hw, rate, &prate, false); |
| u32 tim2; |
| |
| spin_lock(&priv->tim2_lock); |
| tim2 = readl(priv->regs + CLCD_TIM2); |
| tim2 &= ~(TIM2_BCD | TIM2_PCD_LO_MASK | TIM2_PCD_HI_MASK); |
| |
| if (div == 1) { |
| tim2 |= TIM2_BCD; |
| } else { |
| div -= 2; |
| tim2 |= div & TIM2_PCD_LO_MASK; |
| tim2 |= (div >> TIM2_PCD_LO_BITS) << TIM2_PCD_HI_SHIFT; |
| } |
| |
| writel(tim2, priv->regs + CLCD_TIM2); |
| spin_unlock(&priv->tim2_lock); |
| |
| return 0; |
| } |
| |
| static const struct clk_ops pl111_clk_div_ops = { |
| .recalc_rate = pl111_clk_div_recalc_rate, |
| .round_rate = pl111_clk_div_round_rate, |
| .set_rate = pl111_clk_div_set_rate, |
| }; |
| |
| static int |
| pl111_init_clock_divider(struct drm_device *drm) |
| { |
| struct pl111_drm_dev_private *priv = drm->dev_private; |
| struct clk *parent = devm_clk_get(drm->dev, "clcdclk"); |
| struct clk_hw *div = &priv->clk_div; |
| const char *parent_name; |
| struct clk_init_data init = { |
| .name = "pl111_div", |
| .ops = &pl111_clk_div_ops, |
| .parent_names = &parent_name, |
| .num_parents = 1, |
| .flags = CLK_SET_RATE_PARENT, |
| }; |
| int ret; |
| |
| if (IS_ERR(parent)) { |
| dev_err(drm->dev, "CLCD: unable to get clcdclk.\n"); |
| return PTR_ERR(parent); |
| } |
| parent_name = __clk_get_name(parent); |
| |
| spin_lock_init(&priv->tim2_lock); |
| div->init = &init; |
| |
| ret = devm_clk_hw_register(drm->dev, div); |
| |
| priv->clk = div->clk; |
| return ret; |
| } |
| |
| int pl111_display_init(struct drm_device *drm) |
| { |
| struct pl111_drm_dev_private *priv = drm->dev_private; |
| struct device *dev = drm->dev; |
| struct device_node *endpoint; |
| u32 tft_r0b0g0[3]; |
| int ret; |
| static const u32 formats[] = { |
| DRM_FORMAT_ABGR8888, |
| DRM_FORMAT_XBGR8888, |
| DRM_FORMAT_ARGB8888, |
| DRM_FORMAT_XRGB8888, |
| DRM_FORMAT_BGR565, |
| DRM_FORMAT_RGB565, |
| DRM_FORMAT_ABGR1555, |
| DRM_FORMAT_XBGR1555, |
| DRM_FORMAT_ARGB1555, |
| DRM_FORMAT_XRGB1555, |
| DRM_FORMAT_ABGR4444, |
| DRM_FORMAT_XBGR4444, |
| DRM_FORMAT_ARGB4444, |
| DRM_FORMAT_XRGB4444, |
| }; |
| |
| endpoint = of_graph_get_next_endpoint(dev->of_node, NULL); |
| if (!endpoint) |
| return -ENODEV; |
| |
| if (of_property_read_u32_array(endpoint, |
| "arm,pl11x,tft-r0g0b0-pads", |
| tft_r0b0g0, |
| ARRAY_SIZE(tft_r0b0g0)) != 0) { |
| dev_err(dev, "arm,pl11x,tft-r0g0b0-pads should be 3 ints\n"); |
| of_node_put(endpoint); |
| return -ENOENT; |
| } |
| of_node_put(endpoint); |
| |
| if (tft_r0b0g0[0] != 0 || |
| tft_r0b0g0[1] != 8 || |
| tft_r0b0g0[2] != 16) { |
| dev_err(dev, "arm,pl11x,tft-r0g0b0-pads != [0,8,16] not yet supported\n"); |
| return -EINVAL; |
| } |
| |
| ret = pl111_init_clock_divider(drm); |
| if (ret) |
| return ret; |
| |
| ret = drm_simple_display_pipe_init(drm, &priv->pipe, |
| &pl111_display_funcs, |
| formats, ARRAY_SIZE(formats), |
| NULL, &priv->connector.connector); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |