blob: 1f178b878e42f01ce667067098cba6b93a6a22e3 [file] [log] [blame]
/*
* Copyright (c) 2006-2009 Red Hat Inc.
* Copyright (c) 2006-2008 Intel Corporation
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
*
* DRM framebuffer helper functions
*
* Permission to use, copy, modify, distribute, and sell this software and its
* documentation for any purpose is hereby granted without fee, provided that
* the above copyright notice appear in all copies and that both that copyright
* notice and this permission notice appear in supporting documentation, and
* that the name of the copyright holders not be used in advertising or
* publicity pertaining to distribution of the software without specific,
* written prior permission. The copyright holders make no representations
* about the suitability of this software for any purpose. It is provided "as
* is" without express or implied warranty.
*
* THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
* INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
* EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
* CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
* DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
* TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
* OF THIS SOFTWARE.
*
* Authors:
* Dave Airlie <airlied@linux.ie>
* Jesse Barnes <jesse.barnes@intel.com>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/console.h>
#include <linux/kernel.h>
#include <linux/sysrq.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_fb_helper.h>
#include <drm/drm_crtc_helper.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include "drm_crtc_helper_internal.h"
static bool drm_fbdev_emulation = true;
module_param_named(fbdev_emulation, drm_fbdev_emulation, bool, 0600);
MODULE_PARM_DESC(fbdev_emulation,
"Enable legacy fbdev emulation [default=true]");
static int drm_fbdev_overalloc = CONFIG_DRM_FBDEV_OVERALLOC;
module_param(drm_fbdev_overalloc, int, 0444);
MODULE_PARM_DESC(drm_fbdev_overalloc,
"Overallocation of the fbdev buffer (%) [default="
__MODULE_STRING(CONFIG_DRM_FBDEV_OVERALLOC) "]");
static LIST_HEAD(kernel_fb_helper_list);
static DEFINE_MUTEX(kernel_fb_helper_lock);
/**
* DOC: fbdev helpers
*
* The fb helper functions are useful to provide an fbdev on top of a drm kernel
* mode setting driver. They can be used mostly independently from the crtc
* helper functions used by many drivers to implement the kernel mode setting
* interfaces.
*
* Initialization is done as a four-step process with drm_fb_helper_prepare(),
* drm_fb_helper_init(), drm_fb_helper_single_add_all_connectors() and
* drm_fb_helper_initial_config(). Drivers with fancier requirements than the
* default behaviour can override the third step with their own code.
* Teardown is done with drm_fb_helper_fini() after the fbdev device is
* unregisters using drm_fb_helper_unregister_fbi().
*
* At runtime drivers should restore the fbdev console by calling
* drm_fb_helper_restore_fbdev_mode_unlocked() from their &drm_driver.lastclose
* callback. They should also notify the fb helper code from updates to the
* output configuration by calling drm_fb_helper_hotplug_event(). For easier
* integration with the output polling code in drm_crtc_helper.c the modeset
* code provides a &drm_mode_config_funcs.output_poll_changed callback.
*
* All other functions exported by the fb helper library can be used to
* implement the fbdev driver interface by the driver.
*
* It is possible, though perhaps somewhat tricky, to implement race-free
* hotplug detection using the fbdev helpers. The drm_fb_helper_prepare()
* helper must be called first to initialize the minimum required to make
* hotplug detection work. Drivers also need to make sure to properly set up
* the &drm_mode_config.funcs member. After calling drm_kms_helper_poll_init()
* it is safe to enable interrupts and start processing hotplug events. At the
* same time, drivers should initialize all modeset objects such as CRTCs,
* encoders and connectors. To finish up the fbdev helper initialization, the
* drm_fb_helper_init() function is called. To probe for all attached displays
* and set up an initial configuration using the detected hardware, drivers
* should call drm_fb_helper_single_add_all_connectors() followed by
* drm_fb_helper_initial_config().
*
* If &drm_framebuffer_funcs.dirty is set, the
* drm_fb_helper_{cfb,sys}_{write,fillrect,copyarea,imageblit} functions will
* accumulate changes and schedule &drm_fb_helper.dirty_work to run right
* away. This worker then calls the dirty() function ensuring that it will
* always run in process context since the fb_*() function could be running in
* atomic context. If drm_fb_helper_deferred_io() is used as the deferred_io
* callback it will also schedule dirty_work with the damage collected from the
* mmap page writes.
*/
#define drm_fb_helper_for_each_connector(fbh, i__) \
for (({ lockdep_assert_held(&(fbh)->dev->mode_config.mutex); }), \
i__ = 0; i__ < (fbh)->connector_count; i__++)
int drm_fb_helper_add_one_connector(struct drm_fb_helper *fb_helper,
struct drm_connector *connector)
{
struct drm_fb_helper_connector *fb_conn;
struct drm_fb_helper_connector **temp;
unsigned int count;
if (!drm_fbdev_emulation)
return 0;
WARN_ON(!mutex_is_locked(&fb_helper->dev->mode_config.mutex));
count = fb_helper->connector_count + 1;
if (count > fb_helper->connector_info_alloc_count) {
size_t size = count * sizeof(fb_conn);
temp = krealloc(fb_helper->connector_info, size, GFP_KERNEL);
if (!temp)
return -ENOMEM;
fb_helper->connector_info_alloc_count = count;
fb_helper->connector_info = temp;
}
fb_conn = kzalloc(sizeof(*fb_conn), GFP_KERNEL);
if (!fb_conn)
return -ENOMEM;
drm_connector_get(connector);
fb_conn->connector = connector;
fb_helper->connector_info[fb_helper->connector_count++] = fb_conn;
return 0;
}
EXPORT_SYMBOL(drm_fb_helper_add_one_connector);
/**
* drm_fb_helper_single_add_all_connectors() - add all connectors to fbdev
* emulation helper
* @fb_helper: fbdev initialized with drm_fb_helper_init
*
* This functions adds all the available connectors for use with the given
* fb_helper. This is a separate step to allow drivers to freely assign
* connectors to the fbdev, e.g. if some are reserved for special purposes or
* not adequate to be used for the fbcon.
*
* This function is protected against concurrent connector hotadds/removals
* using drm_fb_helper_add_one_connector() and
* drm_fb_helper_remove_one_connector().
*/
int drm_fb_helper_single_add_all_connectors(struct drm_fb_helper *fb_helper)
{
struct drm_device *dev = fb_helper->dev;
struct drm_connector *connector;
struct drm_connector_list_iter conn_iter;
int i, ret = 0;
if (!drm_fbdev_emulation)
return 0;
mutex_lock(&dev->mode_config.mutex);
drm_connector_list_iter_begin(dev, &conn_iter);
drm_for_each_connector_iter(connector, &conn_iter) {
ret = drm_fb_helper_add_one_connector(fb_helper, connector);
if (ret)
goto fail;
}
goto out;
fail:
drm_fb_helper_for_each_connector(fb_helper, i) {
struct drm_fb_helper_connector *fb_helper_connector =
fb_helper->connector_info[i];
drm_connector_put(fb_helper_connector->connector);
kfree(fb_helper_connector);
fb_helper->connector_info[i] = NULL;
}
fb_helper->connector_count = 0;
out:
drm_connector_list_iter_end(&conn_iter);
mutex_unlock(&dev->mode_config.mutex);
return ret;
}
EXPORT_SYMBOL(drm_fb_helper_single_add_all_connectors);
int drm_fb_helper_remove_one_connector(struct drm_fb_helper *fb_helper,
struct drm_connector *connector)
{
struct drm_fb_helper_connector *fb_helper_connector;
int i, j;
if (!drm_fbdev_emulation)
return 0;
WARN_ON(!mutex_is_locked(&fb_helper->dev->mode_config.mutex));
for (i = 0; i < fb_helper->connector_count; i++) {
if (fb_helper->connector_info[i]->connector == connector)
break;
}
if (i == fb_helper->connector_count)
return -EINVAL;
fb_helper_connector = fb_helper->connector_info[i];
drm_connector_put(fb_helper_connector->connector);
for (j = i + 1; j < fb_helper->connector_count; j++)
fb_helper->connector_info[j - 1] = fb_helper->connector_info[j];
fb_helper->connector_count--;
kfree(fb_helper_connector);
return 0;
}
EXPORT_SYMBOL(drm_fb_helper_remove_one_connector);
static void drm_fb_helper_save_lut_atomic(struct drm_crtc *crtc, struct drm_fb_helper *helper)
{
uint16_t *r_base, *g_base, *b_base;
int i;
if (helper->funcs->gamma_get == NULL)
return;
r_base = crtc->gamma_store;
g_base = r_base + crtc->gamma_size;
b_base = g_base + crtc->gamma_size;
for (i = 0; i < crtc->gamma_size; i++)
helper->funcs->gamma_get(crtc, &r_base[i], &g_base[i], &b_base[i], i);
}
static void drm_fb_helper_restore_lut_atomic(struct drm_crtc *crtc)
{
uint16_t *r_base, *g_base, *b_base;
if (crtc->funcs->gamma_set == NULL)
return;
r_base = crtc->gamma_store;
g_base = r_base + crtc->gamma_size;
b_base = g_base + crtc->gamma_size;
crtc->funcs->gamma_set(crtc, r_base, g_base, b_base,
crtc->gamma_size, NULL);
}
/**
* drm_fb_helper_debug_enter - implementation for &fb_ops.fb_debug_enter
* @info: fbdev registered by the helper
*/
int drm_fb_helper_debug_enter(struct fb_info *info)
{
struct drm_fb_helper *helper = info->par;
const struct drm_crtc_helper_funcs *funcs;
int i;
list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
for (i = 0; i < helper->crtc_count; i++) {
struct drm_mode_set *mode_set =
&helper->crtc_info[i].mode_set;
if (!mode_set->crtc->enabled)
continue;
funcs = mode_set->crtc->helper_private;
if (funcs->mode_set_base_atomic == NULL)
continue;
if (drm_drv_uses_atomic_modeset(mode_set->crtc->dev))
continue;
drm_fb_helper_save_lut_atomic(mode_set->crtc, helper);
funcs->mode_set_base_atomic(mode_set->crtc,
mode_set->fb,
mode_set->x,
mode_set->y,
ENTER_ATOMIC_MODE_SET);
}
}
return 0;
}
EXPORT_SYMBOL(drm_fb_helper_debug_enter);
/* Find the real fb for a given fb helper CRTC */
static struct drm_framebuffer *drm_mode_config_fb(struct drm_crtc *crtc)
{
struct drm_device *dev = crtc->dev;
struct drm_crtc *c;
drm_for_each_crtc(c, dev) {
if (crtc->base.id == c->base.id)
return c->primary->fb;
}
return NULL;
}
/**
* drm_fb_helper_debug_leave - implementation for &fb_ops.fb_debug_leave
* @info: fbdev registered by the helper
*/
int drm_fb_helper_debug_leave(struct fb_info *info)
{
struct drm_fb_helper *helper = info->par;
struct drm_crtc *crtc;
const struct drm_crtc_helper_funcs *funcs;
struct drm_framebuffer *fb;
int i;
for (i = 0; i < helper->crtc_count; i++) {
struct drm_mode_set *mode_set = &helper->crtc_info[i].mode_set;
crtc = mode_set->crtc;
funcs = crtc->helper_private;
fb = drm_mode_config_fb(crtc);
if (!crtc->enabled)
continue;
if (!fb) {
DRM_ERROR("no fb to restore??\n");
continue;
}
if (funcs->mode_set_base_atomic == NULL)
continue;
if (drm_drv_uses_atomic_modeset(crtc->dev))
continue;
drm_fb_helper_restore_lut_atomic(mode_set->crtc);
funcs->mode_set_base_atomic(mode_set->crtc, fb, crtc->x,
crtc->y, LEAVE_ATOMIC_MODE_SET);
}
return 0;
}
EXPORT_SYMBOL(drm_fb_helper_debug_leave);
static int restore_fbdev_mode_atomic(struct drm_fb_helper *fb_helper)
{
struct drm_device *dev = fb_helper->dev;
struct drm_plane *plane;
struct drm_atomic_state *state;
int i, ret;
unsigned int plane_mask;
state = drm_atomic_state_alloc(dev);
if (!state)
return -ENOMEM;
state->acquire_ctx = dev->mode_config.acquire_ctx;
retry:
plane_mask = 0;
drm_for_each_plane(plane, dev) {
struct drm_plane_state *plane_state;
plane_state = drm_atomic_get_plane_state(state, plane);
if (IS_ERR(plane_state)) {
ret = PTR_ERR(plane_state);
goto fail;
}
plane_state->rotation = DRM_ROTATE_0;
plane->old_fb = plane->fb;
plane_mask |= 1 << drm_plane_index(plane);
/* disable non-primary: */
if (plane->type == DRM_PLANE_TYPE_PRIMARY)
continue;
ret = __drm_atomic_helper_disable_plane(plane, plane_state);
if (ret != 0)
goto fail;
}
for (i = 0; i < fb_helper->crtc_count; i++) {
struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
ret = __drm_atomic_helper_set_config(mode_set, state);
if (ret != 0)
goto fail;
}
ret = drm_atomic_commit(state);
fail:
drm_atomic_clean_old_fb(dev, plane_mask, ret);
if (ret == -EDEADLK)
goto backoff;
drm_atomic_state_put(state);
return ret;
backoff:
drm_atomic_state_clear(state);
drm_atomic_legacy_backoff(state);
goto retry;
}
static int restore_fbdev_mode_legacy(struct drm_fb_helper *fb_helper)
{
struct drm_device *dev = fb_helper->dev;
struct drm_plane *plane;
int i;
drm_for_each_plane(plane, dev) {
if (plane->type != DRM_PLANE_TYPE_PRIMARY)
drm_plane_force_disable(plane);
if (plane->rotation_property)
drm_mode_plane_set_obj_prop(plane,
plane->rotation_property,
DRM_ROTATE_0);
}
for (i = 0; i < fb_helper->crtc_count; i++) {
struct drm_mode_set *mode_set = &fb_helper->crtc_info[i].mode_set;
struct drm_crtc *crtc = mode_set->crtc;
int ret;
if (crtc->funcs->cursor_set2) {
ret = crtc->funcs->cursor_set2(crtc, NULL, 0, 0, 0, 0, 0);
if (ret)
return ret;
} else if (crtc->funcs->cursor_set) {
ret = crtc->funcs->cursor_set(crtc, NULL, 0, 0, 0);
if (ret)
return ret;
}
ret = drm_mode_set_config_internal(mode_set);
if (ret)
return ret;
}
return 0;
}
static int restore_fbdev_mode(struct drm_fb_helper *fb_helper)
{
struct drm_device *dev = fb_helper->dev;
drm_warn_on_modeset_not_all_locked(dev);
if (drm_drv_uses_atomic_modeset(dev))
return restore_fbdev_mode_atomic(fb_helper);
else
return restore_fbdev_mode_legacy(fb_helper);
}
/**
* drm_fb_helper_restore_fbdev_mode_unlocked - restore fbdev configuration
* @fb_helper: fbcon to restore
*
* This should be called from driver's drm &drm_driver.lastclose callback
* when implementing an fbcon on top of kms using this helper. This ensures that
* the user isn't greeted with a black screen when e.g. X dies.
*
* RETURNS:
* Zero if everything went ok, negative error code otherwise.
*/
int drm_fb_helper_restore_fbdev_mode_unlocked(struct drm_fb_helper *fb_helper)
{
struct drm_device *dev = fb_helper->dev;
bool do_delayed;
int ret;
if (!drm_fbdev_emulation)
return -ENODEV;
drm_modeset_lock_all(dev);
ret = restore_fbdev_mode(fb_helper);
do_delayed = fb_helper->delayed_hotplug;
if (do_delayed)
fb_helper->delayed_hotplug = false;
drm_modeset_unlock_all(dev);
if (do_delayed)
drm_fb_helper_hotplug_event(fb_helper);
return ret;
}
EXPORT_SYMBOL(drm_fb_helper_restore_fbdev_mode_unlocked);
static bool drm_fb_helper_is_bound(struct drm_fb_helper *fb_helper)
{
struct drm_device *dev = fb_helper->dev;
struct drm_crtc *crtc;
int bound = 0, crtcs_bound = 0;
/*
* Sometimes user space wants everything disabled, so don't steal the
* display if there's a master.
*/
if (READ_ONCE(dev->master))
return false;
drm_for_each_crtc(crtc, dev) {
if (crtc->primary->fb)
crtcs_bound++;
if (crtc->primary->fb == fb_helper->fb)
bound++;
}
if (bound < crtcs_bound)
return false;
return true;
}
#ifdef CONFIG_MAGIC_SYSRQ
/*
* restore fbcon display for all kms driver's using this helper, used for sysrq
* and panic handling.
*/
static bool drm_fb_helper_force_kernel_mode(void)
{
bool ret, error = false;
struct drm_fb_helper *helper;
if (list_empty(&kernel_fb_helper_list))
return false;
list_for_each_entry(helper, &kernel_fb_helper_list, kernel_fb_list) {
struct drm_device *dev = helper->dev;
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
continue;
drm_modeset_lock_all(dev);
ret = restore_fbdev_mode(helper);
if (ret)
error = true;
drm_modeset_unlock_all(dev);
}
return error;
}
static void drm_fb_helper_restore_work_fn(struct work_struct *ignored)
{
bool ret;
ret = drm_fb_helper_force_kernel_mode();
if (ret == true)
DRM_ERROR("Failed to restore crtc configuration\n");
}
static DECLARE_WORK(drm_fb_helper_restore_work, drm_fb_helper_restore_work_fn);
static void drm_fb_helper_sysrq(int dummy1)
{
schedule_work(&drm_fb_helper_restore_work);
}
static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = {
.handler = drm_fb_helper_sysrq,
.help_msg = "force-fb(V)",
.action_msg = "Restore framebuffer console",
};
#else
static struct sysrq_key_op sysrq_drm_fb_helper_restore_op = { };
#endif
static void drm_fb_helper_dpms(struct fb_info *info, int dpms_mode)
{
struct drm_fb_helper *fb_helper = info->par;
struct drm_device *dev = fb_helper->dev;
struct drm_crtc *crtc;
struct drm_connector *connector;
int i, j;
/*
* For each CRTC in this fb, turn the connectors on/off.
*/
drm_modeset_lock_all(dev);
if (!drm_fb_helper_is_bound(fb_helper)) {
drm_modeset_unlock_all(dev);
return;
}
for (i = 0; i < fb_helper->crtc_count; i++) {
crtc = fb_helper->crtc_info[i].mode_set.crtc;
if (!crtc->enabled)
continue;
/* Walk the connectors & encoders on this fb turning them on/off */
drm_fb_helper_for_each_connector(fb_helper, j) {
connector = fb_helper->connector_info[j]->connector;
connector->funcs->dpms(connector, dpms_mode);
drm_object_property_set_value(&connector->base,
dev->mode_config.dpms_property, dpms_mode);
}
}
drm_modeset_unlock_all(dev);
}
/**
* drm_fb_helper_blank - implementation for &fb_ops.fb_blank
* @blank: desired blanking state
* @info: fbdev registered by the helper
*/
int drm_fb_helper_blank(int blank, struct fb_info *info)
{
if (oops_in_progress)
return -EBUSY;
switch (blank) {
/* Display: On; HSync: On, VSync: On */
case FB_BLANK_UNBLANK:
drm_fb_helper_dpms(info, DRM_MODE_DPMS_ON);
break;
/* Display: Off; HSync: On, VSync: On */
case FB_BLANK_NORMAL:
drm_fb_helper_dpms(info, DRM_MODE_DPMS_STANDBY);
break;
/* Display: Off; HSync: Off, VSync: On */
case FB_BLANK_HSYNC_SUSPEND:
drm_fb_helper_dpms(info, DRM_MODE_DPMS_STANDBY);
break;
/* Display: Off; HSync: On, VSync: Off */
case FB_BLANK_VSYNC_SUSPEND:
drm_fb_helper_dpms(info, DRM_MODE_DPMS_SUSPEND);
break;
/* Display: Off; HSync: Off, VSync: Off */
case FB_BLANK_POWERDOWN:
drm_fb_helper_dpms(info, DRM_MODE_DPMS_OFF);
break;
}
return 0;
}
EXPORT_SYMBOL(drm_fb_helper_blank);
static void drm_fb_helper_modeset_release(struct drm_fb_helper *helper,
struct drm_mode_set *modeset)
{
int i;
for (i = 0; i < modeset->num_connectors; i++) {
drm_connector_put(modeset->connectors[i]);
modeset->connectors[i] = NULL;
}
modeset->num_connectors = 0;
drm_mode_destroy(helper->dev, modeset->mode);
modeset->mode = NULL;
/* FIXME should hold a ref? */
modeset->fb = NULL;
}
static void drm_fb_helper_crtc_free(struct drm_fb_helper *helper)
{
int i;
for (i = 0; i < helper->connector_count; i++) {
drm_connector_put(helper->connector_info[i]->connector);
kfree(helper->connector_info[i]);
}
kfree(helper->connector_info);
for (i = 0; i < helper->crtc_count; i++) {
struct drm_mode_set *modeset = &helper->crtc_info[i].mode_set;
drm_fb_helper_modeset_release(helper, modeset);
kfree(modeset->connectors);
}
kfree(helper->crtc_info);
}
static void drm_fb_helper_resume_worker(struct work_struct *work)
{
struct drm_fb_helper *helper = container_of(work, struct drm_fb_helper,
resume_work);
console_lock();
fb_set_suspend(helper->fbdev, 0);
console_unlock();
}
static void drm_fb_helper_dirty_work(struct work_struct *work)
{
struct drm_fb_helper *helper = container_of(work, struct drm_fb_helper,
dirty_work);
struct drm_clip_rect *clip = &helper->dirty_clip;
struct drm_clip_rect clip_copy;
unsigned long flags;
spin_lock_irqsave(&helper->dirty_lock, flags);
clip_copy = *clip;
clip->x1 = clip->y1 = ~0;
clip->x2 = clip->y2 = 0;
spin_unlock_irqrestore(&helper->dirty_lock, flags);
/* call dirty callback only when it has been really touched */
if (clip_copy.x1 < clip_copy.x2 && clip_copy.y1 < clip_copy.y2)
helper->fb->funcs->dirty(helper->fb, NULL, 0, 0, &clip_copy, 1);
}
/**
* drm_fb_helper_prepare - setup a drm_fb_helper structure
* @dev: DRM device
* @helper: driver-allocated fbdev helper structure to set up
* @funcs: pointer to structure of functions associate with this helper
*
* Sets up the bare minimum to make the framebuffer helper usable. This is
* useful to implement race-free initialization of the polling helpers.
*/
void drm_fb_helper_prepare(struct drm_device *dev, struct drm_fb_helper *helper,
const struct drm_fb_helper_funcs *funcs)
{
INIT_LIST_HEAD(&helper->kernel_fb_list);
spin_lock_init(&helper->dirty_lock);
INIT_WORK(&helper->resume_work, drm_fb_helper_resume_worker);
INIT_WORK(&helper->dirty_work, drm_fb_helper_dirty_work);
helper->dirty_clip.x1 = helper->dirty_clip.y1 = ~0;
helper->funcs = funcs;
helper->dev = dev;
}
EXPORT_SYMBOL(drm_fb_helper_prepare);
/**
* drm_fb_helper_init - initialize a &struct drm_fb_helper
* @dev: drm device
* @fb_helper: driver-allocated fbdev helper structure to initialize
* @max_conn_count: max connector count
*
* This allocates the structures for the fbdev helper with the given limits.
* Note that this won't yet touch the hardware (through the driver interfaces)
* nor register the fbdev. This is only done in drm_fb_helper_initial_config()
* to allow driver writes more control over the exact init sequence.
*
* Drivers must call drm_fb_helper_prepare() before calling this function.
*
* RETURNS:
* Zero if everything went ok, nonzero otherwise.
*/
int drm_fb_helper_init(struct drm_device *dev,
struct drm_fb_helper *fb_helper,
int max_conn_count)
{
struct drm_crtc *crtc;
struct drm_mode_config *config = &dev->mode_config;
int i;
if (!drm_fbdev_emulation)
return 0;
if (!max_conn_count)
return -EINVAL;
fb_helper->crtc_info = kcalloc(config->num_crtc, sizeof(struct drm_fb_helper_crtc), GFP_KERNEL);
if (!fb_helper->crtc_info)
return -ENOMEM;
fb_helper->crtc_count = config->num_crtc;
fb_helper->connector_info = kcalloc(dev->mode_config.num_connector, sizeof(struct drm_fb_helper_connector *), GFP_KERNEL);
if (!fb_helper->connector_info) {
kfree(fb_helper->crtc_info);
return -ENOMEM;
}
fb_helper->connector_info_alloc_count = dev->mode_config.num_connector;
fb_helper->connector_count = 0;
for (i = 0; i < fb_helper->crtc_count; i++) {
fb_helper->crtc_info[i].mode_set.connectors =
kcalloc(max_conn_count,
sizeof(struct drm_connector *),
GFP_KERNEL);
if (!fb_helper->crtc_info[i].mode_set.connectors)
goto out_free;
fb_helper->crtc_info[i].mode_set.num_connectors = 0;
}
i = 0;
drm_for_each_crtc(crtc, dev) {
fb_helper->crtc_info[i].mode_set.crtc = crtc;
i++;
}
return 0;
out_free:
drm_fb_helper_crtc_free(fb_helper);
return -ENOMEM;
}
EXPORT_SYMBOL(drm_fb_helper_init);
/**
* drm_fb_helper_alloc_fbi - allocate fb_info and some of its members
* @fb_helper: driver-allocated fbdev helper
*
* A helper to alloc fb_info and the members cmap and apertures. Called
* by the driver within the fb_probe fb_helper callback function. Drivers do not
* need to release the allocated fb_info structure themselves, this is
* automatically done when calling drm_fb_helper_fini().
*
* RETURNS:
* fb_info pointer if things went okay, pointer containing error code
* otherwise
*/
struct fb_info *drm_fb_helper_alloc_fbi(struct drm_fb_helper *fb_helper)
{
struct device *dev = fb_helper->dev->dev;
struct fb_info *info;
int ret;
info = framebuffer_alloc(0, dev);
if (!info)
return ERR_PTR(-ENOMEM);
ret = fb_alloc_cmap(&info->cmap, 256, 0);
if (ret)
goto err_release;
info->apertures = alloc_apertures(1);
if (!info->apertures) {
ret = -ENOMEM;
goto err_free_cmap;
}
fb_helper->fbdev = info;
return info;
err_free_cmap:
fb_dealloc_cmap(&info->cmap);
err_release:
framebuffer_release(info);
return ERR_PTR(ret);
}
EXPORT_SYMBOL(drm_fb_helper_alloc_fbi);
/**
* drm_fb_helper_unregister_fbi - unregister fb_info framebuffer device
* @fb_helper: driver-allocated fbdev helper
*
* A wrapper around unregister_framebuffer, to release the fb_info
* framebuffer device. This must be called before releasing all resources for
* @fb_helper by calling drm_fb_helper_fini().
*/
void drm_fb_helper_unregister_fbi(struct drm_fb_helper *fb_helper)
{
if (fb_helper && fb_helper->fbdev)
unregister_framebuffer(fb_helper->fbdev);
}
EXPORT_SYMBOL(drm_fb_helper_unregister_fbi);
/**
* drm_fb_helper_fini - finialize a &struct drm_fb_helper
* @fb_helper: driver-allocated fbdev helper
*
* This cleans up all remaining resources associated with @fb_helper. Must be
* called after drm_fb_helper_unlink_fbi() was called.
*/
void drm_fb_helper_fini(struct drm_fb_helper *fb_helper)
{
struct fb_info *info;
if (!drm_fbdev_emulation || !fb_helper)
return;
info = fb_helper->fbdev;
if (info) {
if (info->cmap.len)
fb_dealloc_cmap(&info->cmap);
framebuffer_release(info);
}
fb_helper->fbdev = NULL;
cancel_work_sync(&fb_helper->resume_work);
cancel_work_sync(&fb_helper->dirty_work);
mutex_lock(&kernel_fb_helper_lock);
if (!list_empty(&fb_helper->kernel_fb_list)) {
list_del(&fb_helper->kernel_fb_list);
if (list_empty(&kernel_fb_helper_list))
unregister_sysrq_key('v', &sysrq_drm_fb_helper_restore_op);
}
mutex_unlock(&kernel_fb_helper_lock);
drm_fb_helper_crtc_free(fb_helper);
}
EXPORT_SYMBOL(drm_fb_helper_fini);
/**
* drm_fb_helper_unlink_fbi - wrapper around unlink_framebuffer
* @fb_helper: driver-allocated fbdev helper
*
* A wrapper around unlink_framebuffer implemented by fbdev core
*/
void drm_fb_helper_unlink_fbi(struct drm_fb_helper *fb_helper)
{
if (fb_helper && fb_helper->fbdev)
unlink_framebuffer(fb_helper->fbdev);
}
EXPORT_SYMBOL(drm_fb_helper_unlink_fbi);
static void drm_fb_helper_dirty(struct fb_info *info, u32 x, u32 y,
u32 width, u32 height)
{
struct drm_fb_helper *helper = info->par;
struct drm_clip_rect *clip = &helper->dirty_clip;
unsigned long flags;
if (!helper->fb->funcs->dirty)
return;
spin_lock_irqsave(&helper->dirty_lock, flags);
clip->x1 = min_t(u32, clip->x1, x);
clip->y1 = min_t(u32, clip->y1, y);
clip->x2 = max_t(u32, clip->x2, x + width);
clip->y2 = max_t(u32, clip->y2, y + height);
spin_unlock_irqrestore(&helper->dirty_lock, flags);
schedule_work(&helper->dirty_work);
}
/**
* drm_fb_helper_deferred_io() - fbdev deferred_io callback function
* @info: fb_info struct pointer
* @pagelist: list of dirty mmap framebuffer pages
*
* This function is used as the &fb_deferred_io.deferred_io
* callback function for flushing the fbdev mmap writes.
*/
void drm_fb_helper_deferred_io(struct fb_info *info,
struct list_head *pagelist)
{
unsigned long start, end, min, max;
struct page *page;
u32 y1, y2;
min = ULONG_MAX;
max = 0;
list_for_each_entry(page, pagelist, lru) {
start = page->index << PAGE_SHIFT;
end = start + PAGE_SIZE - 1;
min = min(min, start);
max = max(max, end);
}
if (min < max) {
y1 = min / info->fix.line_length;
y2 = min_t(u32, DIV_ROUND_UP(max, info->fix.line_length),
info->var.yres);
drm_fb_helper_dirty(info, 0, y1, info->var.xres, y2 - y1);
}
}
EXPORT_SYMBOL(drm_fb_helper_deferred_io);
/**
* drm_fb_helper_sys_read - wrapper around fb_sys_read
* @info: fb_info struct pointer
* @buf: userspace buffer to read from framebuffer memory
* @count: number of bytes to read from framebuffer memory
* @ppos: read offset within framebuffer memory
*
* A wrapper around fb_sys_read implemented by fbdev core
*/
ssize_t drm_fb_helper_sys_read(struct fb_info *info, char __user *buf,
size_t count, loff_t *ppos)
{
return fb_sys_read(info, buf, count, ppos);
}
EXPORT_SYMBOL(drm_fb_helper_sys_read);
/**
* drm_fb_helper_sys_write - wrapper around fb_sys_write
* @info: fb_info struct pointer
* @buf: userspace buffer to write to framebuffer memory
* @count: number of bytes to write to framebuffer memory
* @ppos: write offset within framebuffer memory
*
* A wrapper around fb_sys_write implemented by fbdev core
*/
ssize_t drm_fb_helper_sys_write(struct fb_info *info, const char __user *buf,
size_t count, loff_t *ppos)
{
ssize_t ret;
ret = fb_sys_write(info, buf, count, ppos);
if (ret > 0)
drm_fb_helper_dirty(info, 0, 0, info->var.xres,
info->var.yres);
return ret;
}
EXPORT_SYMBOL(drm_fb_helper_sys_write);
/**
* drm_fb_helper_sys_fillrect - wrapper around sys_fillrect
* @info: fbdev registered by the helper
* @rect: info about rectangle to fill
*
* A wrapper around sys_fillrect implemented by fbdev core
*/
void drm_fb_helper_sys_fillrect(struct fb_info *info,
const struct fb_fillrect *rect)
{
sys_fillrect(info, rect);
drm_fb_helper_dirty(info, rect->dx, rect->dy,
rect->width, rect->height);
}
EXPORT_SYMBOL(drm_fb_helper_sys_fillrect);
/**
* drm_fb_helper_sys_copyarea - wrapper around sys_copyarea
* @info: fbdev registered by the helper
* @area: info about area to copy
*
* A wrapper around sys_copyarea implemented by fbdev core
*/
void drm_fb_helper_sys_copyarea(struct fb_info *info,
const struct fb_copyarea *area)
{
sys_copyarea(info, area);
drm_fb_helper_dirty(info, area->dx, area->dy,
area->width, area->height);
}
EXPORT_SYMBOL(drm_fb_helper_sys_copyarea);
/**
* drm_fb_helper_sys_imageblit - wrapper around sys_imageblit
* @info: fbdev registered by the helper
* @image: info about image to blit
*
* A wrapper around sys_imageblit implemented by fbdev core
*/
void drm_fb_helper_sys_imageblit(struct fb_info *info,
const struct fb_image *image)
{
sys_imageblit(info, image);
drm_fb_helper_dirty(info, image->dx, image->dy,
image->width, image->height);
}
EXPORT_SYMBOL(drm_fb_helper_sys_imageblit);
/**
* drm_fb_helper_cfb_fillrect - wrapper around cfb_fillrect
* @info: fbdev registered by the helper
* @rect: info about rectangle to fill
*
* A wrapper around cfb_imageblit implemented by fbdev core
*/
void drm_fb_helper_cfb_fillrect(struct fb_info *info,
const struct fb_fillrect *rect)
{
cfb_fillrect(info, rect);
drm_fb_helper_dirty(info, rect->dx, rect->dy,
rect->width, rect->height);
}
EXPORT_SYMBOL(drm_fb_helper_cfb_fillrect);
/**
* drm_fb_helper_cfb_copyarea - wrapper around cfb_copyarea
* @info: fbdev registered by the helper
* @area: info about area to copy
*
* A wrapper around cfb_copyarea implemented by fbdev core
*/
void drm_fb_helper_cfb_copyarea(struct fb_info *info,
const struct fb_copyarea *area)
{
cfb_copyarea(info, area);
drm_fb_helper_dirty(info, area->dx, area->dy,
area->width, area->height);
}
EXPORT_SYMBOL(drm_fb_helper_cfb_copyarea);
/**
* drm_fb_helper_cfb_imageblit - wrapper around cfb_imageblit
* @info: fbdev registered by the helper
* @image: info about image to blit
*
* A wrapper around cfb_imageblit implemented by fbdev core
*/
void drm_fb_helper_cfb_imageblit(struct fb_info *info,
const struct fb_image *image)
{
cfb_imageblit(info, image);
drm_fb_helper_dirty(info, image->dx, image->dy,
image->width, image->height);
}
EXPORT_SYMBOL(drm_fb_helper_cfb_imageblit);
/**
* drm_fb_helper_set_suspend - wrapper around fb_set_suspend
* @fb_helper: driver-allocated fbdev helper
* @suspend: whether to suspend or resume
*
* A wrapper around fb_set_suspend implemented by fbdev core.
* Use drm_fb_helper_set_suspend_unlocked() if you don't need to take
* the lock yourself
*/
void drm_fb_helper_set_suspend(struct drm_fb_helper *fb_helper, bool suspend)
{
if (fb_helper && fb_helper->fbdev)
fb_set_suspend(fb_helper->fbdev, suspend);
}
EXPORT_SYMBOL(drm_fb_helper_set_suspend);
/**
* drm_fb_helper_set_suspend_unlocked - wrapper around fb_set_suspend that also
* takes the console lock
* @fb_helper: driver-allocated fbdev helper
* @suspend: whether to suspend or resume
*
* A wrapper around fb_set_suspend() that takes the console lock. If the lock
* isn't available on resume, a worker is tasked with waiting for the lock
* to become available. The console lock can be pretty contented on resume
* due to all the printk activity.
*
* This function can be called multiple times with the same state since
* &fb_info.state is checked to see if fbdev is running or not before locking.
*
* Use drm_fb_helper_set_suspend() if you need to take the lock yourself.
*/
void drm_fb_helper_set_suspend_unlocked(struct drm_fb_helper *fb_helper,
bool suspend)
{
if (!fb_helper || !fb_helper->fbdev)
return;
/* make sure there's no pending/ongoing resume */
flush_work(&fb_helper->resume_work);
if (suspend) {
if (fb_helper->fbdev->state != FBINFO_STATE_RUNNING)
return;
console_lock();
} else {
if (fb_helper->fbdev->state == FBINFO_STATE_RUNNING)
return;
if (!console_trylock()) {
schedule_work(&fb_helper->resume_work);
return;
}
}
fb_set_suspend(fb_helper->fbdev, suspend);
console_unlock();
}
EXPORT_SYMBOL(drm_fb_helper_set_suspend_unlocked);
static int setcolreg(struct drm_crtc *crtc, u16 red, u16 green,
u16 blue, u16 regno, struct fb_info *info)
{
struct drm_fb_helper *fb_helper = info->par;
struct drm_framebuffer *fb = fb_helper->fb;
if (info->fix.visual == FB_VISUAL_TRUECOLOR) {
u32 *palette;
u32 value;
/* place color in psuedopalette */
if (regno > 16)
return -EINVAL;
palette = (u32 *)info->pseudo_palette;
red >>= (16 - info->var.red.length);
green >>= (16 - info->var.green.length);
blue >>= (16 - info->var.blue.length);
value = (red << info->var.red.offset) |
(green << info->var.green.offset) |
(blue << info->var.blue.offset);
if (info->var.transp.length > 0) {
u32 mask = (1 << info->var.transp.length) - 1;
mask <<= info->var.transp.offset;
value |= mask;
}
palette[regno] = value;
return 0;
}
/*
* The driver really shouldn't advertise pseudo/directcolor
* visuals if it can't deal with the palette.
*/
if (WARN_ON(!fb_helper->funcs->gamma_set ||
!fb_helper->funcs->gamma_get))
return -EINVAL;
WARN_ON(fb->format->cpp[0] != 1);
fb_helper->funcs->gamma_set(crtc, red, green, blue, regno);
return 0;
}
/**
* drm_fb_helper_setcmap - implementation for &fb_ops.fb_setcmap
* @cmap: cmap to set
* @info: fbdev registered by the helper
*/
int drm_fb_helper_setcmap(struct fb_cmap *cmap, struct fb_info *info)
{
struct drm_fb_helper *fb_helper = info->par;
struct drm_device *dev = fb_helper->dev;
const struct drm_crtc_helper_funcs *crtc_funcs;
u16 *red, *green, *blue, *transp;
struct drm_crtc *crtc;
int i, j, rc = 0;
int start;
if (oops_in_progress)
return -EBUSY;
drm_modeset_lock_all(dev);
if (!drm_fb_helper_is_bound(fb_helper)) {
drm_modeset_unlock_all(dev);
return -EBUSY;
}
for (i = 0; i < fb_helper->crtc_count; i++) {
crtc = fb_helper->crtc_info[i].mode_set.crtc;
crtc_funcs = crtc->helper_private;
red = cmap->red;
green = cmap->green;
blue = cmap->blue;
transp = cmap->transp;
start = cmap->start;
for (j = 0; j < cmap->len; j++) {
u16 hred, hgreen, hblue, htransp = 0xffff;
hred = *red++;
hgreen = *green++;
hblue = *blue++;
if (transp)
htransp = *transp++;
rc = setcolreg(crtc, hred, hgreen, hblue, start++, info);
if (rc)
goto out;
}
if (crtc_funcs->load_lut)
crtc_funcs->load_lut(crtc);
}
out:
drm_modeset_unlock_all(dev);
return rc;
}
EXPORT_SYMBOL(drm_fb_helper_setcmap);
/**
* drm_fb_helper_ioctl - legacy ioctl implementation
* @info: fbdev registered by the helper
* @cmd: ioctl command
* @arg: ioctl argument
*
* A helper to implement the standard fbdev ioctl. Only
* FBIO_WAITFORVSYNC is implemented for now.
*/
int drm_fb_helper_ioctl(struct fb_info *info, unsigned int cmd,
unsigned long arg)
{
struct drm_fb_helper *fb_helper = info->par;
struct drm_device *dev = fb_helper->dev;
struct drm_mode_set *mode_set;
struct drm_crtc *crtc;
int ret = 0;
mutex_lock(&dev->mode_config.mutex);
if (!drm_fb_helper_is_bound(fb_helper)) {
ret = -EBUSY;
goto unlock;
}
switch (cmd) {
case FBIO_WAITFORVSYNC:
/*
* Only consider the first CRTC.
*
* This ioctl is supposed to take the CRTC number as
* an argument, but in fbdev times, what that number
* was supposed to be was quite unclear, different
* drivers were passing that argument differently
* (some by reference, some by value), and most of the
* userspace applications were just hardcoding 0 as an
* argument.
*
* The first CRTC should be the integrated panel on
* most drivers, so this is the best choice we can
* make. If we're not smart enough here, one should
* just consider switch the userspace to KMS.
*/
mode_set = &fb_helper->crtc_info[0].mode_set;
crtc = mode_set->crtc;
/*
* Only wait for a vblank event if the CRTC is
* enabled, otherwise just don't do anythintg,
* not even report an error.
*/
ret = drm_crtc_vblank_get(crtc);
if (!ret) {
drm_crtc_wait_one_vblank(crtc);
drm_crtc_vblank_put(crtc);
}
ret = 0;
goto unlock;
default:
ret = -ENOTTY;
}
unlock:
mutex_unlock(&dev->mode_config.mutex);
return ret;
}
EXPORT_SYMBOL(drm_fb_helper_ioctl);
/**
* drm_fb_helper_check_var - implementation for &fb_ops.fb_check_var
* @var: screeninfo to check
* @info: fbdev registered by the helper
*/
int drm_fb_helper_check_var(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct drm_fb_helper *fb_helper = info->par;
struct drm_framebuffer *fb = fb_helper->fb;
int depth;
if (var->pixclock != 0 || in_dbg_master())
return -EINVAL;
/*
* Changes struct fb_var_screeninfo are currently not pushed back
* to KMS, hence fail if different settings are requested.
*/
if (var->bits_per_pixel != fb->format->cpp[0] * 8 ||
var->xres > fb->width || var->yres > fb->height ||
var->xres_virtual > fb->width || var->yres_virtual > fb->height) {
DRM_DEBUG("fb requested width/height/bpp can't fit in current fb "
"request %dx%d-%d (virtual %dx%d) > %dx%d-%d\n",
var->xres, var->yres, var->bits_per_pixel,
var->xres_virtual, var->yres_virtual,
fb->width, fb->height, fb->format->cpp[0] * 8);
return -EINVAL;
}
switch (var->bits_per_pixel) {
case 16:
depth = (var->green.length == 6) ? 16 : 15;
break;
case 32:
depth = (var->transp.length > 0) ? 32 : 24;
break;
default:
depth = var->bits_per_pixel;
break;
}
switch (depth) {
case 8:
var->red.offset = 0;
var->green.offset = 0;
var->blue.offset = 0;
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
var->transp.length = 0;
var->transp.offset = 0;
break;
case 15:
var->red.offset = 10;
var->green.offset = 5;
var->blue.offset = 0;
var->red.length = 5;
var->green.length = 5;
var->blue.length = 5;
var->transp.length = 1;
var->transp.offset = 15;
break;
case 16:
var->red.offset = 11;
var->green.offset = 5;
var->blue.offset = 0;
var->red.length = 5;
var->green.length = 6;
var->blue.length = 5;
var->transp.length = 0;
var->transp.offset = 0;
break;
case 24:
var->red.offset = 16;
var->green.offset = 8;
var->blue.offset = 0;
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
var->transp.length = 0;
var->transp.offset = 0;
break;
case 32:
var->red.offset = 16;
var->green.offset = 8;
var->blue.offset = 0;
var->red.length = 8;
var->green.length = 8;
var->blue.length = 8;
var->transp.length = 8;
var->transp.offset = 24;
break;
default:
return -EINVAL;
}
return 0;
}
EXPORT_SYMBOL(drm_fb_helper_check_var);
/**
* drm_fb_helper_set_par - implementation for &fb_ops.fb_set_par
* @info: fbdev registered by the helper
*
* This will let fbcon do the mode init and is called at initialization time by
* the fbdev core when registering the driver, and later on through the hotplug
* callback.
*/
int drm_fb_helper_set_par(struct fb_info *info)
{
struct drm_fb_helper *fb_helper = info->par;
struct fb_var_screeninfo *var = &info->var;
if (oops_in_progress)
return -EBUSY;
if (var->pixclock != 0) {
DRM_ERROR("PIXEL CLOCK SET\n");
return -EINVAL;
}
drm_fb_helper_restore_fbdev_mode_unlocked(fb_helper);
return 0;
}
EXPORT_SYMBOL(drm_fb_helper_set_par);
static int pan_display_atomic(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct drm_fb_helper *fb_helper = info->par;
struct drm_device *dev = fb_helper->dev;
struct drm_atomic_state *state;
struct drm_plane *plane;
int i, ret;
unsigned int plane_mask;
state = drm_atomic_state_alloc(dev);
if (!state)
return -ENOMEM;
state->acquire_ctx = dev->mode_config.acquire_ctx;
retry:
plane_mask = 0;
for (i = 0; i < fb_helper->crtc_count; i++) {
struct drm_mode_set *mode_set;
mode_set = &fb_helper->crtc_info[i].mode_set;
mode_set->x = var->xoffset;
mode_set->y = var->yoffset;
ret = __drm_atomic_helper_set_config(mode_set, state);
if (ret != 0)
goto fail;
plane = mode_set->crtc->primary;
plane_mask |= (1 << drm_plane_index(plane));
plane->old_fb = plane->fb;
}
ret = drm_atomic_commit(state);
if (ret != 0)
goto fail;
info->var.xoffset = var->xoffset;
info->var.yoffset = var->yoffset;
fail:
drm_atomic_clean_old_fb(dev, plane_mask, ret);
if (ret == -EDEADLK)
goto backoff;
drm_atomic_state_put(state);
return ret;
backoff:
drm_atomic_state_clear(state);
drm_atomic_legacy_backoff(state);
goto retry;
}
static int pan_display_legacy(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct drm_fb_helper *fb_helper = info->par;
struct drm_mode_set *modeset;
int ret = 0;
int i;
for (i = 0; i < fb_helper->crtc_count; i++) {
modeset = &fb_helper->crtc_info[i].mode_set;
modeset->x = var->xoffset;
modeset->y = var->yoffset;
if (modeset->num_connectors) {
ret = drm_mode_set_config_internal(modeset);
if (!ret) {
info->var.xoffset = var->xoffset;
info->var.yoffset = var->yoffset;
}
}
}
return ret;
}
/**
* drm_fb_helper_pan_display - implementation for &fb_ops.fb_pan_display
* @var: updated screen information
* @info: fbdev registered by the helper
*/
int drm_fb_helper_pan_display(struct fb_var_screeninfo *var,
struct fb_info *info)
{
struct drm_fb_helper *fb_helper = info->par;
struct drm_device *dev = fb_helper->dev;
int ret;
if (oops_in_progress)
return -EBUSY;
drm_modeset_lock_all(dev);
if (!drm_fb_helper_is_bound(fb_helper)) {
drm_modeset_unlock_all(dev);
return -EBUSY;
}
if (drm_drv_uses_atomic_modeset(dev))
ret = pan_display_atomic(var, info);
else
ret = pan_display_legacy(var, info);
drm_modeset_unlock_all(dev);
return ret;
}
EXPORT_SYMBOL(drm_fb_helper_pan_display);
/*
* Allocates the backing storage and sets up the fbdev info structure through
* the ->fb_probe callback and then registers the fbdev and sets up the panic
* notifier.
*/
static int drm_fb_helper_single_fb_probe(struct drm_fb_helper *fb_helper,
int preferred_bpp)
{
int ret = 0;
int crtc_count = 0;
int i;
struct drm_fb_helper_surface_size sizes;
int gamma_size = 0;
memset(&sizes, 0, sizeof(struct drm_fb_helper_surface_size));
sizes.surface_depth = 24;
sizes.surface_bpp = 32;
sizes.fb_width = (u32)-1;
sizes.fb_height = (u32)-1;
/* if driver picks 8 or 16 by default use that for both depth/bpp */
if (preferred_bpp != sizes.surface_bpp)
sizes.surface_depth = sizes.surface_bpp = preferred_bpp;
/* first up get a count of crtcs now in use and new min/maxes width/heights */
drm_fb_helper_for_each_connector(fb_helper, i) {
struct drm_fb_helper_connector *fb_helper_conn = fb_helper->connector_info[i];
struct drm_cmdline_mode *cmdline_mode;
cmdline_mode = &fb_helper_conn->connector->cmdline_mode;
if (cmdline_mode->bpp_specified) {
switch (cmdline_mode->bpp) {
case 8:
sizes.surface_depth = sizes.surface_bpp = 8;
break;
case 15:
sizes.surface_depth = 15;
sizes.surface_bpp = 16;
break;
case 16:
sizes.surface_depth = sizes.surface_bpp = 16;
break;
case 24:
sizes.surface_depth = sizes.surface_bpp = 24;
break;
case 32:
sizes.surface_depth = 24;
sizes.surface_bpp = 32;
break;
}
break;
}
}
crtc_count = 0;
for (i = 0; i < fb_helper->crtc_count; i++) {
struct drm_display_mode *desired_mode;
struct drm_mode_set *mode_set;
int x, y, j;
/* in case of tile group, are we the last tile vert or horiz?
* If no tile group you are always the last one both vertically
* and horizontally
*/
bool lastv = true, lasth = true;
desired_mode = fb_helper->crtc_info[i].desired_mode;
mode_set = &fb_helper->crtc_info[i].mode_set;
if (!desired_mode)
continue;
crtc_count++;
x = fb_helper->crtc_info[i].x;
y = fb_helper->crtc_info[i].y;
if (gamma_size == 0)
gamma_size = fb_helper->crtc_info[i].mode_set.crtc->gamma_size;
sizes.surface_width = max_t(u32, desired_mode->hdisplay + x, sizes.surface_width);
sizes.surface_height = max_t(u32, desired_mode->vdisplay + y, sizes.surface_height);
for (j = 0; j < mode_set->num_connectors; j++) {
struct drm_connector *connector = mode_set->connectors[j];
if (connector->has_tile) {
lasth = (connector->tile_h_loc == (connector->num_h_tile - 1));
lastv = (connector->tile_v_loc == (connector->num_v_tile - 1));
/* cloning to multiple tiles is just crazy-talk, so: */
break;
}
}
if (lasth)
sizes.fb_width = min_t(u32, desired_mode->hdisplay + x, sizes.fb_width);
if (lastv)
sizes.fb_height = min_t(u32, desired_mode->vdisplay + y, sizes.fb_height);
}
if (crtc_count == 0 || sizes.fb_width == -1 || sizes.fb_height == -1) {
/*
* hmm everyone went away - assume VGA cable just fell out
* and will come back later.
*/
DRM_INFO("Cannot find any crtc or sizes - going 1024x768\n");
sizes.fb_width = sizes.surface_width = 1024;
sizes.fb_height = sizes.surface_height = 768;
}
/* Handle our overallocation */
sizes.surface_height *= drm_fbdev_overalloc;
sizes.surface_height /= 100;
/* push down into drivers */
ret = (*fb_helper->funcs->fb_probe)(fb_helper, &sizes);
if (ret < 0)
return ret;
/*
* Set the fb pointer - usually drm_setup_crtcs does this for hotplug
* events, but at init time drm_setup_crtcs needs to be called before
* the fb is allocated (since we need to figure out the desired size of
* the fb before we can allocate it ...). Hence we need to fix things up
* here again.
*/
for (i = 0; i < fb_helper->crtc_count; i++)
if (fb_helper->crtc_info[i].mode_set.num_connectors)
fb_helper->crtc_info[i].mode_set.fb = fb_helper->fb;
return 0;
}
/**
* drm_fb_helper_fill_fix - initializes fixed fbdev information
* @info: fbdev registered by the helper
* @pitch: desired pitch
* @depth: desired depth
*
* Helper to fill in the fixed fbdev information useful for a non-accelerated
* fbdev emulations. Drivers which support acceleration methods which impose
* additional constraints need to set up their own limits.
*
* Drivers should call this (or their equivalent setup code) from their
* &drm_fb_helper_funcs.fb_probe callback.
*/
void drm_fb_helper_fill_fix(struct fb_info *info, uint32_t pitch,
uint32_t depth)
{
info->fix.type = FB_TYPE_PACKED_PIXELS;
info->fix.visual = depth == 8 ? FB_VISUAL_PSEUDOCOLOR :
FB_VISUAL_TRUECOLOR;
info->fix.mmio_start = 0;
info->fix.mmio_len = 0;
info->fix.type_aux = 0;
info->fix.xpanstep = 1; /* doing it in hw */
info->fix.ypanstep = 1; /* doing it in hw */
info->fix.ywrapstep = 0;
info->fix.accel = FB_ACCEL_NONE;
info->fix.line_length = pitch;
}
EXPORT_SYMBOL(drm_fb_helper_fill_fix);
/**
* drm_fb_helper_fill_var - initalizes variable fbdev information
* @info: fbdev instance to set up
* @fb_helper: fb helper instance to use as template
* @fb_width: desired fb width
* @fb_height: desired fb height
*
* Sets up the variable fbdev metainformation from the given fb helper instance
* and the drm framebuffer allocated in &drm_fb_helper.fb.
*
* Drivers should call this (or their equivalent setup code) from their
* &drm_fb_helper_funcs.fb_probe callback after having allocated the fbdev
* backing storage framebuffer.
*/
void drm_fb_helper_fill_var(struct fb_info *info, struct drm_fb_helper *fb_helper,
uint32_t fb_width, uint32_t fb_height)
{
struct drm_framebuffer *fb = fb_helper->fb;
info->pseudo_palette = fb_helper->pseudo_palette;
info->var.xres_virtual = fb->width;
info->var.yres_virtual = fb->height;
info->var.bits_per_pixel = fb->format->cpp[0] * 8;
info->var.accel_flags = FB_ACCELF_TEXT;
info->var.xoffset = 0;
info->var.yoffset = 0;
info->var.activate = FB_ACTIVATE_NOW;
info->var.height = -1;
info->var.width = -1;
switch (fb->format->depth) {
case 8:
info->var.red.offset = 0;
info->var.green.offset = 0;
info->var.blue.offset = 0;
info->var.red.length = 8; /* 8bit DAC */
info->var.green.length = 8;
info->var.blue.length = 8;
info->var.transp.offset = 0;
info->var.transp.length = 0;
break;
case 15:
info->var.red.offset = 10;
info->var.green.offset = 5;
info->var.blue.offset = 0;
info->var.red.length = 5;
info->var.green.length = 5;
info->var.blue.length = 5;
info->var.transp.offset = 15;
info->var.transp.length = 1;
break;
case 16:
info->var.red.offset = 11;
info->var.green.offset = 5;
info->var.blue.offset = 0;
info->var.red.length = 5;
info->var.green.length = 6;
info->var.blue.length = 5;
info->var.transp.offset = 0;
break;
case 24:
info->var.red.offset = 16;
info->var.green.offset = 8;
info->var.blue.offset = 0;
info->var.red.length = 8;
info->var.green.length = 8;
info->var.blue.length = 8;
info->var.transp.offset = 0;
info->var.transp.length = 0;
break;
case 32:
info->var.red.offset = 16;
info->var.green.offset = 8;
info->var.blue.offset = 0;
info->var.red.length = 8;
info->var.green.length = 8;
info->var.blue.length = 8;
info->var.transp.offset = 24;
info->var.transp.length = 8;
break;
default:
break;
}
info->var.xres = fb_width;
info->var.yres = fb_height;
}
EXPORT_SYMBOL(drm_fb_helper_fill_var);
static int drm_fb_helper_probe_connector_modes(struct drm_fb_helper *fb_helper,
uint32_t maxX,
uint32_t maxY)
{
struct drm_connector *connector;
int count = 0;
int i;
drm_fb_helper_for_each_connector(fb_helper, i) {
connector = fb_helper->connector_info[i]->connector;
count += connector->funcs->fill_modes(connector, maxX, maxY);
}
return count;
}
struct drm_display_mode *drm_has_preferred_mode(struct drm_fb_helper_connector *fb_connector, int width, int height)
{
struct drm_display_mode *mode;
list_for_each_entry(mode, &fb_connector->connector->modes, head) {
if (mode->hdisplay > width ||
mode->vdisplay > height)
continue;
if (mode->type & DRM_MODE_TYPE_PREFERRED)
return mode;
}
return NULL;
}
EXPORT_SYMBOL(drm_has_preferred_mode);
static bool drm_has_cmdline_mode(struct drm_fb_helper_connector *fb_connector)
{
return fb_connector->connector->cmdline_mode.specified;
}
struct drm_display_mode *drm_pick_cmdline_mode(struct drm_fb_helper_connector *fb_helper_conn)
{
struct drm_cmdline_mode *cmdline_mode;
struct drm_display_mode *mode;
bool prefer_non_interlace;
cmdline_mode = &fb_helper_conn->connector->cmdline_mode;
if (cmdline_mode->specified == false)
return NULL;
/* attempt to find a matching mode in the list of modes
* we have gotten so far, if not add a CVT mode that conforms
*/
if (cmdline_mode->rb || cmdline_mode->margins)
goto create_mode;
prefer_non_interlace = !cmdline_mode->interlace;
again:
list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) {
/* check width/height */
if (mode->hdisplay != cmdline_mode->xres ||
mode->vdisplay != cmdline_mode->yres)
continue;
if (cmdline_mode->refresh_specified) {
if (mode->vrefresh != cmdline_mode->refresh)
continue;
}
if (cmdline_mode->interlace) {
if (!(mode->flags & DRM_MODE_FLAG_INTERLACE))
continue;
} else if (prefer_non_interlace) {
if (mode->flags & DRM_MODE_FLAG_INTERLACE)
continue;
}
return mode;
}
if (prefer_non_interlace) {
prefer_non_interlace = false;
goto again;
}
create_mode:
mode = drm_mode_create_from_cmdline_mode(fb_helper_conn->connector->dev,
cmdline_mode);
list_add(&mode->head, &fb_helper_conn->connector->modes);
return mode;
}
EXPORT_SYMBOL(drm_pick_cmdline_mode);
static bool drm_connector_enabled(struct drm_connector *connector, bool strict)
{
bool enable;
if (strict)
enable = connector->status == connector_status_connected;
else
enable = connector->status != connector_status_disconnected;
return enable;
}
static void drm_enable_connectors(struct drm_fb_helper *fb_helper,
bool *enabled)
{
bool any_enabled = false;
struct drm_connector *connector;
int i = 0;
drm_fb_helper_for_each_connector(fb_helper, i) {
connector = fb_helper->connector_info[i]->connector;
enabled[i] = drm_connector_enabled(connector, true);
DRM_DEBUG_KMS("connector %d enabled? %s\n", connector->base.id,
enabled[i] ? "yes" : "no");
any_enabled |= enabled[i];
}
if (any_enabled)
return;
drm_fb_helper_for_each_connector(fb_helper, i) {
connector = fb_helper->connector_info[i]->connector;
enabled[i] = drm_connector_enabled(connector, false);
}
}
static bool drm_target_cloned(struct drm_fb_helper *fb_helper,
struct drm_display_mode **modes,
struct drm_fb_offset *offsets,
bool *enabled, int width, int height)
{
int count, i, j;
bool can_clone = false;
struct drm_fb_helper_connector *fb_helper_conn;
struct drm_display_mode *dmt_mode, *mode;
/* only contemplate cloning in the single crtc case */
if (fb_helper->crtc_count > 1)
return false;
count = 0;
drm_fb_helper_for_each_connector(fb_helper, i) {
if (enabled[i])
count++;
}
/* only contemplate cloning if more than one connector is enabled */
if (count <= 1)
return false;
/* check the command line or if nothing common pick 1024x768 */
can_clone = true;
drm_fb_helper_for_each_connector(fb_helper, i) {
if (!enabled[i])
continue;
fb_helper_conn = fb_helper->connector_info[i];
modes[i] = drm_pick_cmdline_mode(fb_helper_conn);
if (!modes[i]) {
can_clone = false;
break;
}
for (j = 0; j < i; j++) {
if (!enabled[j])
continue;
if (!drm_mode_equal(modes[j], modes[i]))
can_clone = false;
}
}
if (can_clone) {
DRM_DEBUG_KMS("can clone using command line\n");
return true;
}
/* try and find a 1024x768 mode on each connector */
can_clone = true;
dmt_mode = drm_mode_find_dmt(fb_helper->dev, 1024, 768, 60, false);
drm_fb_helper_for_each_connector(fb_helper, i) {
if (!enabled[i])
continue;
fb_helper_conn = fb_helper->connector_info[i];
list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) {
if (drm_mode_equal(mode, dmt_mode))
modes[i] = mode;
}
if (!modes[i])
can_clone = false;
}
if (can_clone) {
DRM_DEBUG_KMS("can clone using 1024x768\n");
return true;
}
DRM_INFO("kms: can't enable cloning when we probably wanted to.\n");
return false;
}
static int drm_get_tile_offsets(struct drm_fb_helper *fb_helper,
struct drm_display_mode **modes,
struct drm_fb_offset *offsets,
int idx,
int h_idx, int v_idx)
{
struct drm_fb_helper_connector *fb_helper_conn;
int i;
int hoffset = 0, voffset = 0;
drm_fb_helper_for_each_connector(fb_helper, i) {
fb_helper_conn = fb_helper->connector_info[i];
if (!fb_helper_conn->connector->has_tile)
continue;
if (!modes[i] && (h_idx || v_idx)) {
DRM_DEBUG_KMS("no modes for connector tiled %d %d\n", i,
fb_helper_conn->connector->base.id);
continue;
}
if (fb_helper_conn->connector->tile_h_loc < h_idx)
hoffset += modes[i]->hdisplay;
if (fb_helper_conn->connector->tile_v_loc < v_idx)
voffset += modes[i]->vdisplay;
}
offsets[idx].x = hoffset;
offsets[idx].y = voffset;
DRM_DEBUG_KMS("returned %d %d for %d %d\n", hoffset, voffset, h_idx, v_idx);
return 0;
}
static bool drm_target_preferred(struct drm_fb_helper *fb_helper,
struct drm_display_mode **modes,
struct drm_fb_offset *offsets,
bool *enabled, int width, int height)
{
struct drm_fb_helper_connector *fb_helper_conn;
const u64 mask = BIT_ULL(fb_helper->connector_count) - 1;
u64 conn_configured = 0;
int tile_pass = 0;
int i;
retry:
drm_fb_helper_for_each_connector(fb_helper, i) {
fb_helper_conn = fb_helper->connector_info[i];
if (conn_configured & BIT_ULL(i))
continue;
if (enabled[i] == false) {
conn_configured |= BIT_ULL(i);
continue;
}
/* first pass over all the untiled connectors */
if (tile_pass == 0 && fb_helper_conn->connector->has_tile)
continue;
if (tile_pass == 1) {
if (fb_helper_conn->connector->tile_h_loc != 0 ||
fb_helper_conn->connector->tile_v_loc != 0)
continue;
} else {
if (fb_helper_conn->connector->tile_h_loc != tile_pass - 1 &&
fb_helper_conn->connector->tile_v_loc != tile_pass - 1)
/* if this tile_pass doesn't cover any of the tiles - keep going */
continue;
/*
* find the tile offsets for this pass - need to find
* all tiles left and above
*/
drm_get_tile_offsets(fb_helper, modes, offsets,
i, fb_helper_conn->connector->tile_h_loc, fb_helper_conn->connector->tile_v_loc);
}
DRM_DEBUG_KMS("looking for cmdline mode on connector %d\n",
fb_helper_conn->connector->base.id);
/* got for command line mode first */
modes[i] = drm_pick_cmdline_mode(fb_helper_conn);
if (!modes[i]) {
DRM_DEBUG_KMS("looking for preferred mode on connector %d %d\n",
fb_helper_conn->connector->base.id, fb_helper_conn->connector->tile_group ? fb_helper_conn->connector->tile_group->id : 0);
modes[i] = drm_has_preferred_mode(fb_helper_conn, width, height);
}
/* No preferred modes, pick one off the list */
if (!modes[i] && !list_empty(&fb_helper_conn->connector->modes)) {
list_for_each_entry(modes[i], &fb_helper_conn->connector->modes, head)
break;
}
DRM_DEBUG_KMS("found mode %s\n", modes[i] ? modes[i]->name :
"none");
conn_configured |= BIT_ULL(i);
}
if ((conn_configured & mask) != mask) {
tile_pass++;
goto retry;
}
return true;
}
static int drm_pick_crtcs(struct drm_fb_helper *fb_helper,
struct drm_fb_helper_crtc **best_crtcs,
struct drm_display_mode **modes,
int n, int width, int height)
{
int c, o;
struct drm_connector *connector;
const struct drm_connector_helper_funcs *connector_funcs;
struct drm_encoder *encoder;
int my_score, best_score, score;
struct drm_fb_helper_crtc **crtcs, *crtc;
struct drm_fb_helper_connector *fb_helper_conn;
if (n == fb_helper->connector_count)
return 0;
fb_helper_conn = fb_helper->connector_info[n];
connector = fb_helper_conn->connector;
best_crtcs[n] = NULL;
best_score = drm_pick_crtcs(fb_helper, best_crtcs, modes, n+1, width, height);
if (modes[n] == NULL)
return best_score;
crtcs = kzalloc(fb_helper->connector_count *
sizeof(struct drm_fb_helper_crtc *), GFP_KERNEL);
if (!crtcs)
return best_score;
my_score = 1;
if (connector->status == connector_status_connected)
my_score++;
if (drm_has_cmdline_mode(fb_helper_conn))
my_score++;
if (drm_has_preferred_mode(fb_helper_conn, width, height))
my_score++;
connector_funcs = connector->helper_private;
/*
* If the DRM device implements atomic hooks and ->best_encoder() is
* NULL we fallback to the default drm_atomic_helper_best_encoder()
* helper.
*/
if (drm_drv_uses_atomic_modeset(fb_helper->dev) &&
!connector_funcs->best_encoder)
encoder = drm_atomic_helper_best_encoder(connector);
else
encoder = connector_funcs->best_encoder(connector);
if (!encoder)
goto out;
/*
* select a crtc for this connector and then attempt to configure
* remaining connectors
*/
for (c = 0; c < fb_helper->crtc_count; c++) {
crtc = &fb_helper->crtc_info[c];
if ((encoder->possible_crtcs & (1 << c)) == 0)
continue;
for (o = 0; o < n; o++)
if (best_crtcs[o] == crtc)
break;
if (o < n) {
/* ignore cloning unless only a single crtc */
if (fb_helper->crtc_count > 1)
continue;
if (!drm_mode_equal(modes[o], modes[n]))
continue;
}
crtcs[n] = crtc;
memcpy(crtcs, best_crtcs, n * sizeof(struct drm_fb_helper_crtc *));
score = my_score + drm_pick_crtcs(fb_helper, crtcs, modes, n + 1,
width, height);
if (score > best_score) {
best_score = score;
memcpy(best_crtcs, crtcs,
fb_helper->connector_count *
sizeof(struct drm_fb_helper_crtc *));
}
}
out:
kfree(crtcs);
return best_score;
}
static void drm_setup_crtcs(struct drm_fb_helper *fb_helper,
u32 width, u32 height)
{
struct drm_device *dev = fb_helper->dev;
struct drm_fb_helper_crtc **crtcs;
struct drm_display_mode **modes;
struct drm_fb_offset *offsets;
bool *enabled;
int i;
DRM_DEBUG_KMS("\n");
if (drm_fb_helper_probe_connector_modes(fb_helper, width, height) == 0)
DRM_DEBUG_KMS("No connectors reported connected with modes\n");
/* prevent concurrent modification of connector_count by hotplug */
lockdep_assert_held(&fb_helper->dev->mode_config.mutex);
crtcs = kcalloc(fb_helper->connector_count,
sizeof(struct drm_fb_helper_crtc *), GFP_KERNEL);
modes = kcalloc(fb_helper->connector_count,
sizeof(struct drm_display_mode *), GFP_KERNEL);
offsets = kcalloc(fb_helper->connector_count,
sizeof(struct drm_fb_offset), GFP_KERNEL);
enabled = kcalloc(fb_helper->connector_count,
sizeof(bool), GFP_KERNEL);
if (!crtcs || !modes || !enabled || !offsets) {
DRM_ERROR("Memory allocation failed\n");
goto out;
}
drm_enable_connectors(fb_helper, enabled);
if (!(fb_helper->funcs->initial_config &&
fb_helper->funcs->initial_config(fb_helper, crtcs, modes,
offsets,
enabled, width, height))) {
memset(modes, 0, fb_helper->connector_count*sizeof(modes[0]));
memset(crtcs, 0, fb_helper->connector_count*sizeof(crtcs[0]));
memset(offsets, 0, fb_helper->connector_count*sizeof(offsets[0]));
if (!drm_target_cloned(fb_helper, modes, offsets,
enabled, width, height) &&
!drm_target_preferred(fb_helper, modes, offsets,
enabled, width, height))
DRM_ERROR("Unable to find initial modes\n");
DRM_DEBUG_KMS("picking CRTCs for %dx%d config\n",
width, height);
drm_pick_crtcs(fb_helper, crtcs, modes, 0, width, height);
}
/* need to set the modesets up here for use later */
/* fill out the connector<->crtc mappings into the modesets */
for (i = 0; i < fb_helper->crtc_count; i++)
drm_fb_helper_modeset_release(fb_helper,
&fb_helper->crtc_info[i].mode_set);
drm_fb_helper_for_each_connector(fb_helper, i) {
struct drm_display_mode *mode = modes[i];
struct drm_fb_helper_crtc *fb_crtc = crtcs[i];
struct drm_fb_offset *offset = &offsets[i];
struct drm_mode_set *modeset = &fb_crtc->mode_set;
if (mode && fb_crtc) {
struct drm_connector *connector =
fb_helper->connector_info[i]->connector;
DRM_DEBUG_KMS("desired mode %s set on crtc %d (%d,%d)\n",
mode->name, fb_crtc->mode_set.crtc->base.id, offset->x, offset->y);
fb_crtc->desired_mode = mode;
fb_crtc->x = offset->x;
fb_crtc->y = offset->y;
modeset->mode = drm_mode_duplicate(dev,
fb_crtc->desired_mode);
drm_connector_get(connector);
modeset->connectors[modeset->num_connectors++] = connector;
modeset->fb = fb_helper->fb;
modeset->x = offset->x;
modeset->y = offset->y;
}
}
out:
kfree(crtcs);
kfree(modes);
kfree(offsets);
kfree(enabled);
}
/**
* drm_fb_helper_initial_config - setup a sane initial connector configuration
* @fb_helper: fb_helper device struct
* @bpp_sel: bpp value to use for the framebuffer configuration
*
* Scans the CRTCs and connectors and tries to put together an initial setup.
* At the moment, this is a cloned configuration across all heads with
* a new framebuffer object as the backing store.
*
* Note that this also registers the fbdev and so allows userspace to call into
* the driver through the fbdev interfaces.
*
* This function will call down into the &drm_fb_helper_funcs.fb_probe callback
* to let the driver allocate and initialize the fbdev info structure and the
* drm framebuffer used to back the fbdev. drm_fb_helper_fill_var() and
* drm_fb_helper_fill_fix() are provided as helpers to setup simple default
* values for the fbdev info structure.
*
* HANG DEBUGGING:
*
* When you have fbcon support built-in or already loaded, this function will do
* a full modeset to setup the fbdev console. Due to locking misdesign in the
* VT/fbdev subsystem that entire modeset sequence has to be done while holding
* console_lock. Until console_unlock is called no dmesg lines will be sent out
* to consoles, not even serial console. This means when your driver crashes,
* you will see absolutely nothing else but a system stuck in this function,
* with no further output. Any kind of printk() you place within your own driver
* or in the drm core modeset code will also never show up.
*
* Standard debug practice is to run the fbcon setup without taking the
* console_lock as a hack, to be able to see backtraces and crashes on the
* serial line. This can be done by setting the fb.lockless_register_fb=1 kernel
* cmdline option.
*
* The other option is to just disable fbdev emulation since very likely the
* first modeset from userspace will crash in the same way, and is even easier
* to debug. This can be done by setting the drm_kms_helper.fbdev_emulation=0
* kernel cmdline option.
*
* RETURNS:
* Zero if everything went ok, nonzero otherwise.
*/
int drm_fb_helper_initial_config(struct drm_fb_helper *fb_helper, int bpp_sel)
{
struct drm_device *dev = fb_helper->dev;
struct fb_info *info;
int ret;
if (!drm_fbdev_emulation)
return 0;
mutex_lock(&dev->mode_config.mutex);
drm_setup_crtcs(fb_helper,
dev->mode_config.max_width,
dev->mode_config.max_height);
ret = drm_fb_helper_single_fb_probe(fb_helper, bpp_sel);
mutex_unlock(&dev->mode_config.mutex);
if (ret)
return ret;
info = fb_helper->fbdev;
info->var.pixclock = 0;
ret = register_framebuffer(info);
if (ret < 0)
return ret;
dev_info(dev->dev, "fb%d: %s frame buffer device\n",
info->node, info->fix.id);
mutex_lock(&kernel_fb_helper_lock);
if (list_empty(&kernel_fb_helper_list))
register_sysrq_key('v', &sysrq_drm_fb_helper_restore_op);
list_add(&fb_helper->kernel_fb_list, &kernel_fb_helper_list);
mutex_unlock(&kernel_fb_helper_lock);
return 0;
}
EXPORT_SYMBOL(drm_fb_helper_initial_config);
/**
* drm_fb_helper_hotplug_event - respond to a hotplug notification by
* probing all the outputs attached to the fb
* @fb_helper: the drm_fb_helper
*
* Scan the connectors attached to the fb_helper and try to put together a
* setup after notification of a change in output configuration.
*
* Called at runtime, takes the mode config locks to be able to check/change the
* modeset configuration. Must be run from process context (which usually means
* either the output polling work or a work item launched from the driver's
* hotplug interrupt).
*
* Note that drivers may call this even before calling
* drm_fb_helper_initial_config but only after drm_fb_helper_init. This allows
* for a race-free fbcon setup and will make sure that the fbdev emulation will
* not miss any hotplug events.
*
* RETURNS:
* 0 on success and a non-zero error code otherwise.
*/
int drm_fb_helper_hotplug_event(struct drm_fb_helper *fb_helper)
{
struct drm_device *dev = fb_helper->dev;
if (!drm_fbdev_emulation)
return 0;
mutex_lock(&dev->mode_config.mutex);
if (!fb_helper->fb || !drm_fb_helper_is_bound(fb_helper)) {
fb_helper->delayed_hotplug = true;
mutex_unlock(&dev->mode_config.mutex);
return 0;
}
DRM_DEBUG_KMS("\n");
drm_setup_crtcs(fb_helper, fb_helper->fb->width, fb_helper->fb->height);
mutex_unlock(&dev->mode_config.mutex);
drm_fb_helper_set_par(fb_helper->fbdev);
return 0;
}
EXPORT_SYMBOL(drm_fb_helper_hotplug_event);
/* The Kconfig DRM_KMS_HELPER selects FRAMEBUFFER_CONSOLE (if !EXPERT)
* but the module doesn't depend on any fb console symbols. At least
* attempt to load fbcon to avoid leaving the system without a usable console.
*/
int __init drm_fb_helper_modinit(void)
{
#if defined(CONFIG_FRAMEBUFFER_CONSOLE_MODULE) && !defined(CONFIG_EXPERT)
const char name[] = "fbcon";
struct module *fbcon;
mutex_lock(&module_mutex);
fbcon = find_module(name);
mutex_unlock(&module_mutex);
if (!fbcon)
request_module_nowait(name);
#endif
return 0;
}
EXPORT_SYMBOL(drm_fb_helper_modinit);