| /* |
| * Driver for SiliconFile NOON010PC30 CIF (1/11") Image Sensor with ISP |
| * |
| * Copyright (C) 2010 - 2011 Samsung Electronics Co., Ltd. |
| * Contact: Sylwester Nawrocki, <s.nawrocki@samsung.com> |
| * |
| * Initial register configuration based on a driver authored by |
| * HeungJun Kim <riverful.kim@samsung.com>. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/i2c.h> |
| #include <linux/slab.h> |
| #include <linux/regulator/consumer.h> |
| #include <media/i2c/noon010pc30.h> |
| #include <linux/videodev2.h> |
| #include <linux/module.h> |
| #include <media/v4l2-ctrls.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-mediabus.h> |
| #include <media/v4l2-subdev.h> |
| |
| static int debug; |
| module_param(debug, int, 0644); |
| MODULE_PARM_DESC(debug, "Enable module debug trace. Set to 1 to enable."); |
| |
| #define MODULE_NAME "NOON010PC30" |
| |
| /* |
| * Register offsets within a page |
| * b15..b8 - page id, b7..b0 - register address |
| */ |
| #define POWER_CTRL_REG 0x0001 |
| #define PAGEMODE_REG 0x03 |
| #define DEVICE_ID_REG 0x0004 |
| #define NOON010PC30_ID 0x86 |
| #define VDO_CTL_REG(n) (0x0010 + (n)) |
| #define SYNC_CTL_REG 0x0012 |
| /* Window size and position */ |
| #define WIN_ROWH_REG 0x0013 |
| #define WIN_ROWL_REG 0x0014 |
| #define WIN_COLH_REG 0x0015 |
| #define WIN_COLL_REG 0x0016 |
| #define WIN_HEIGHTH_REG 0x0017 |
| #define WIN_HEIGHTL_REG 0x0018 |
| #define WIN_WIDTHH_REG 0x0019 |
| #define WIN_WIDTHL_REG 0x001A |
| #define HBLANKH_REG 0x001B |
| #define HBLANKL_REG 0x001C |
| #define VSYNCH_REG 0x001D |
| #define VSYNCL_REG 0x001E |
| /* VSYNC control */ |
| #define VS_CTL_REG(n) (0x00A1 + (n)) |
| /* page 1 */ |
| #define ISP_CTL_REG(n) (0x0110 + (n)) |
| #define YOFS_REG 0x0119 |
| #define DARK_YOFS_REG 0x011A |
| #define SAT_CTL_REG 0x0120 |
| #define BSAT_REG 0x0121 |
| #define RSAT_REG 0x0122 |
| /* Color correction */ |
| #define CMC_CTL_REG 0x0130 |
| #define CMC_OFSGH_REG 0x0133 |
| #define CMC_OFSGL_REG 0x0135 |
| #define CMC_SIGN_REG 0x0136 |
| #define CMC_GOFS_REG 0x0137 |
| #define CMC_COEF_REG(n) (0x0138 + (n)) |
| #define CMC_OFS_REG(n) (0x0141 + (n)) |
| /* Gamma correction */ |
| #define GMA_CTL_REG 0x0160 |
| #define GMA_COEF_REG(n) (0x0161 + (n)) |
| /* Lens Shading */ |
| #define LENS_CTRL_REG 0x01D0 |
| #define LENS_XCEN_REG 0x01D1 |
| #define LENS_YCEN_REG 0x01D2 |
| #define LENS_RC_REG 0x01D3 |
| #define LENS_GC_REG 0x01D4 |
| #define LENS_BC_REG 0x01D5 |
| #define L_AGON_REG 0x01D6 |
| #define L_AGOFF_REG 0x01D7 |
| /* Page 3 - Auto Exposure */ |
| #define AE_CTL_REG(n) (0x0310 + (n)) |
| #define AE_CTL9_REG 0x032C |
| #define AE_CTL10_REG 0x032D |
| #define AE_YLVL_REG 0x031C |
| #define AE_YTH_REG(n) (0x031D + (n)) |
| #define AE_WGT_REG 0x0326 |
| #define EXP_TIMEH_REG 0x0333 |
| #define EXP_TIMEM_REG 0x0334 |
| #define EXP_TIMEL_REG 0x0335 |
| #define EXP_MMINH_REG 0x0336 |
| #define EXP_MMINL_REG 0x0337 |
| #define EXP_MMAXH_REG 0x0338 |
| #define EXP_MMAXM_REG 0x0339 |
| #define EXP_MMAXL_REG 0x033A |
| /* Page 4 - Auto White Balance */ |
| #define AWB_CTL_REG(n) (0x0410 + (n)) |
| #define AWB_ENABE 0x80 |
| #define AWB_WGHT_REG 0x0419 |
| #define BGAIN_PAR_REG(n) (0x044F + (n)) |
| /* Manual white balance, when AWB_CTL2[0]=1 */ |
| #define MWB_RGAIN_REG 0x0466 |
| #define MWB_BGAIN_REG 0x0467 |
| |
| /* The token to mark an array end */ |
| #define REG_TERM 0xFFFF |
| |
| struct noon010_format { |
| u32 code; |
| enum v4l2_colorspace colorspace; |
| u16 ispctl1_reg; |
| }; |
| |
| struct noon010_frmsize { |
| u16 width; |
| u16 height; |
| int vid_ctl1; |
| }; |
| |
| static const char * const noon010_supply_name[] = { |
| "vdd_core", "vddio", "vdda" |
| }; |
| |
| #define NOON010_NUM_SUPPLIES ARRAY_SIZE(noon010_supply_name) |
| |
| struct noon010_info { |
| struct v4l2_subdev sd; |
| struct media_pad pad; |
| struct v4l2_ctrl_handler hdl; |
| struct regulator_bulk_data supply[NOON010_NUM_SUPPLIES]; |
| u32 gpio_nreset; |
| u32 gpio_nstby; |
| |
| /* Protects the struct members below */ |
| struct mutex lock; |
| |
| const struct noon010_format *curr_fmt; |
| const struct noon010_frmsize *curr_win; |
| unsigned int apply_new_cfg:1; |
| unsigned int streaming:1; |
| unsigned int hflip:1; |
| unsigned int vflip:1; |
| unsigned int power:1; |
| u8 i2c_reg_page; |
| }; |
| |
| struct i2c_regval { |
| u16 addr; |
| u16 val; |
| }; |
| |
| /* Supported resolutions. */ |
| static const struct noon010_frmsize noon010_sizes[] = { |
| { |
| .width = 352, |
| .height = 288, |
| .vid_ctl1 = 0, |
| }, { |
| .width = 176, |
| .height = 144, |
| .vid_ctl1 = 0x10, |
| }, { |
| .width = 88, |
| .height = 72, |
| .vid_ctl1 = 0x20, |
| }, |
| }; |
| |
| /* Supported pixel formats. */ |
| static const struct noon010_format noon010_formats[] = { |
| { |
| .code = MEDIA_BUS_FMT_YUYV8_2X8, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| .ispctl1_reg = 0x03, |
| }, { |
| .code = MEDIA_BUS_FMT_YVYU8_2X8, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| .ispctl1_reg = 0x02, |
| }, { |
| .code = MEDIA_BUS_FMT_VYUY8_2X8, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| .ispctl1_reg = 0, |
| }, { |
| .code = MEDIA_BUS_FMT_UYVY8_2X8, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| .ispctl1_reg = 0x01, |
| }, { |
| .code = MEDIA_BUS_FMT_RGB565_2X8_BE, |
| .colorspace = V4L2_COLORSPACE_JPEG, |
| .ispctl1_reg = 0x40, |
| }, |
| }; |
| |
| static const struct i2c_regval noon010_base_regs[] = { |
| { WIN_COLL_REG, 0x06 }, { HBLANKL_REG, 0x7C }, |
| /* Color corection and saturation */ |
| { ISP_CTL_REG(0), 0x30 }, { ISP_CTL_REG(2), 0x30 }, |
| { YOFS_REG, 0x80 }, { DARK_YOFS_REG, 0x04 }, |
| { SAT_CTL_REG, 0x1F }, { BSAT_REG, 0x90 }, |
| { CMC_CTL_REG, 0x0F }, { CMC_OFSGH_REG, 0x3C }, |
| { CMC_OFSGL_REG, 0x2C }, { CMC_SIGN_REG, 0x3F }, |
| { CMC_COEF_REG(0), 0x79 }, { CMC_OFS_REG(0), 0x00 }, |
| { CMC_COEF_REG(1), 0x39 }, { CMC_OFS_REG(1), 0x00 }, |
| { CMC_COEF_REG(2), 0x00 }, { CMC_OFS_REG(2), 0x00 }, |
| { CMC_COEF_REG(3), 0x11 }, { CMC_OFS_REG(3), 0x8B }, |
| { CMC_COEF_REG(4), 0x65 }, { CMC_OFS_REG(4), 0x07 }, |
| { CMC_COEF_REG(5), 0x14 }, { CMC_OFS_REG(5), 0x04 }, |
| { CMC_COEF_REG(6), 0x01 }, { CMC_OFS_REG(6), 0x9C }, |
| { CMC_COEF_REG(7), 0x33 }, { CMC_OFS_REG(7), 0x89 }, |
| { CMC_COEF_REG(8), 0x74 }, { CMC_OFS_REG(8), 0x25 }, |
| /* Automatic white balance */ |
| { AWB_CTL_REG(0), 0x78 }, { AWB_CTL_REG(1), 0x2E }, |
| { AWB_CTL_REG(2), 0x20 }, { AWB_CTL_REG(3), 0x85 }, |
| /* Auto exposure */ |
| { AE_CTL_REG(0), 0xDC }, { AE_CTL_REG(1), 0x81 }, |
| { AE_CTL_REG(2), 0x30 }, { AE_CTL_REG(3), 0xA5 }, |
| { AE_CTL_REG(4), 0x40 }, { AE_CTL_REG(5), 0x51 }, |
| { AE_CTL_REG(6), 0x33 }, { AE_CTL_REG(7), 0x7E }, |
| { AE_CTL9_REG, 0x00 }, { AE_CTL10_REG, 0x02 }, |
| { AE_YLVL_REG, 0x44 }, { AE_YTH_REG(0), 0x34 }, |
| { AE_YTH_REG(1), 0x30 }, { AE_WGT_REG, 0xD5 }, |
| /* Lens shading compensation */ |
| { LENS_CTRL_REG, 0x01 }, { LENS_XCEN_REG, 0x80 }, |
| { LENS_YCEN_REG, 0x70 }, { LENS_RC_REG, 0x53 }, |
| { LENS_GC_REG, 0x40 }, { LENS_BC_REG, 0x3E }, |
| { REG_TERM, 0 }, |
| }; |
| |
| static inline struct noon010_info *to_noon010(struct v4l2_subdev *sd) |
| { |
| return container_of(sd, struct noon010_info, sd); |
| } |
| |
| static inline struct v4l2_subdev *to_sd(struct v4l2_ctrl *ctrl) |
| { |
| return &container_of(ctrl->handler, struct noon010_info, hdl)->sd; |
| } |
| |
| static inline int set_i2c_page(struct noon010_info *info, |
| struct i2c_client *client, unsigned int reg) |
| { |
| u32 page = reg >> 8 & 0xFF; |
| int ret = 0; |
| |
| if (info->i2c_reg_page != page && (reg & 0xFF) != 0x03) { |
| ret = i2c_smbus_write_byte_data(client, PAGEMODE_REG, page); |
| if (!ret) |
| info->i2c_reg_page = page; |
| } |
| return ret; |
| } |
| |
| static int cam_i2c_read(struct v4l2_subdev *sd, u32 reg_addr) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct noon010_info *info = to_noon010(sd); |
| int ret = set_i2c_page(info, client, reg_addr); |
| |
| if (ret) |
| return ret; |
| return i2c_smbus_read_byte_data(client, reg_addr & 0xFF); |
| } |
| |
| static int cam_i2c_write(struct v4l2_subdev *sd, u32 reg_addr, u32 val) |
| { |
| struct i2c_client *client = v4l2_get_subdevdata(sd); |
| struct noon010_info *info = to_noon010(sd); |
| int ret = set_i2c_page(info, client, reg_addr); |
| |
| if (ret) |
| return ret; |
| return i2c_smbus_write_byte_data(client, reg_addr & 0xFF, val); |
| } |
| |
| static inline int noon010_bulk_write_reg(struct v4l2_subdev *sd, |
| const struct i2c_regval *msg) |
| { |
| while (msg->addr != REG_TERM) { |
| int ret = cam_i2c_write(sd, msg->addr, msg->val); |
| |
| if (ret) |
| return ret; |
| msg++; |
| } |
| return 0; |
| } |
| |
| /* Device reset and sleep mode control */ |
| static int noon010_power_ctrl(struct v4l2_subdev *sd, bool reset, bool sleep) |
| { |
| struct noon010_info *info = to_noon010(sd); |
| u8 reg = sleep ? 0xF1 : 0xF0; |
| int ret = 0; |
| |
| if (reset) { |
| ret = cam_i2c_write(sd, POWER_CTRL_REG, reg | 0x02); |
| udelay(20); |
| } |
| if (!ret) { |
| ret = cam_i2c_write(sd, POWER_CTRL_REG, reg); |
| if (reset && !ret) |
| info->i2c_reg_page = -1; |
| } |
| return ret; |
| } |
| |
| /* Automatic white balance control */ |
| static int noon010_enable_autowhitebalance(struct v4l2_subdev *sd, int on) |
| { |
| int ret; |
| |
| ret = cam_i2c_write(sd, AWB_CTL_REG(1), on ? 0x2E : 0x2F); |
| if (!ret) |
| ret = cam_i2c_write(sd, AWB_CTL_REG(0), on ? 0xFB : 0x7B); |
| return ret; |
| } |
| |
| /* Called with struct noon010_info.lock mutex held */ |
| static int noon010_set_flip(struct v4l2_subdev *sd, int hflip, int vflip) |
| { |
| struct noon010_info *info = to_noon010(sd); |
| int reg, ret; |
| |
| reg = cam_i2c_read(sd, VDO_CTL_REG(1)); |
| if (reg < 0) |
| return reg; |
| |
| reg &= 0x7C; |
| if (hflip) |
| reg |= 0x01; |
| if (vflip) |
| reg |= 0x02; |
| |
| ret = cam_i2c_write(sd, VDO_CTL_REG(1), reg | 0x80); |
| if (!ret) { |
| info->hflip = hflip; |
| info->vflip = vflip; |
| } |
| return ret; |
| } |
| |
| /* Configure resolution and color format */ |
| static int noon010_set_params(struct v4l2_subdev *sd) |
| { |
| struct noon010_info *info = to_noon010(sd); |
| |
| int ret = cam_i2c_write(sd, VDO_CTL_REG(0), |
| info->curr_win->vid_ctl1); |
| if (ret) |
| return ret; |
| return cam_i2c_write(sd, ISP_CTL_REG(0), |
| info->curr_fmt->ispctl1_reg); |
| } |
| |
| /* Find nearest matching image pixel size. */ |
| static int noon010_try_frame_size(struct v4l2_mbus_framefmt *mf, |
| const struct noon010_frmsize **size) |
| { |
| unsigned int min_err = ~0; |
| int i = ARRAY_SIZE(noon010_sizes); |
| const struct noon010_frmsize *fsize = &noon010_sizes[0], |
| *match = NULL; |
| |
| while (i--) { |
| int err = abs(fsize->width - mf->width) |
| + abs(fsize->height - mf->height); |
| |
| if (err < min_err) { |
| min_err = err; |
| match = fsize; |
| } |
| fsize++; |
| } |
| if (match) { |
| mf->width = match->width; |
| mf->height = match->height; |
| if (size) |
| *size = match; |
| return 0; |
| } |
| return -EINVAL; |
| } |
| |
| /* Called with info.lock mutex held */ |
| static int power_enable(struct noon010_info *info) |
| { |
| int ret; |
| |
| if (info->power) { |
| v4l2_info(&info->sd, "%s: sensor is already on\n", __func__); |
| return 0; |
| } |
| |
| if (gpio_is_valid(info->gpio_nstby)) |
| gpio_set_value(info->gpio_nstby, 0); |
| |
| if (gpio_is_valid(info->gpio_nreset)) |
| gpio_set_value(info->gpio_nreset, 0); |
| |
| ret = regulator_bulk_enable(NOON010_NUM_SUPPLIES, info->supply); |
| if (ret) |
| return ret; |
| |
| if (gpio_is_valid(info->gpio_nreset)) { |
| msleep(50); |
| gpio_set_value(info->gpio_nreset, 1); |
| } |
| if (gpio_is_valid(info->gpio_nstby)) { |
| udelay(1000); |
| gpio_set_value(info->gpio_nstby, 1); |
| } |
| if (gpio_is_valid(info->gpio_nreset)) { |
| udelay(1000); |
| gpio_set_value(info->gpio_nreset, 0); |
| msleep(100); |
| gpio_set_value(info->gpio_nreset, 1); |
| msleep(20); |
| } |
| info->power = 1; |
| |
| v4l2_dbg(1, debug, &info->sd, "%s: sensor is on\n", __func__); |
| return 0; |
| } |
| |
| /* Called with info.lock mutex held */ |
| static int power_disable(struct noon010_info *info) |
| { |
| int ret; |
| |
| if (!info->power) { |
| v4l2_info(&info->sd, "%s: sensor is already off\n", __func__); |
| return 0; |
| } |
| |
| ret = regulator_bulk_disable(NOON010_NUM_SUPPLIES, info->supply); |
| if (ret) |
| return ret; |
| |
| if (gpio_is_valid(info->gpio_nstby)) |
| gpio_set_value(info->gpio_nstby, 0); |
| |
| if (gpio_is_valid(info->gpio_nreset)) |
| gpio_set_value(info->gpio_nreset, 0); |
| |
| info->power = 0; |
| |
| v4l2_dbg(1, debug, &info->sd, "%s: sensor is off\n", __func__); |
| |
| return 0; |
| } |
| |
| static int noon010_s_ctrl(struct v4l2_ctrl *ctrl) |
| { |
| struct v4l2_subdev *sd = to_sd(ctrl); |
| struct noon010_info *info = to_noon010(sd); |
| int ret = 0; |
| |
| v4l2_dbg(1, debug, sd, "%s: ctrl_id: %d, value: %d\n", |
| __func__, ctrl->id, ctrl->val); |
| |
| mutex_lock(&info->lock); |
| /* |
| * If the device is not powered up by the host driver do |
| * not apply any controls to H/W at this time. Instead |
| * the controls will be restored right after power-up. |
| */ |
| if (!info->power) |
| goto unlock; |
| |
| switch (ctrl->id) { |
| case V4L2_CID_AUTO_WHITE_BALANCE: |
| ret = noon010_enable_autowhitebalance(sd, ctrl->val); |
| break; |
| case V4L2_CID_BLUE_BALANCE: |
| ret = cam_i2c_write(sd, MWB_BGAIN_REG, ctrl->val); |
| break; |
| case V4L2_CID_RED_BALANCE: |
| ret = cam_i2c_write(sd, MWB_RGAIN_REG, ctrl->val); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| unlock: |
| mutex_unlock(&info->lock); |
| return ret; |
| } |
| |
| static int noon010_enum_mbus_code(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_mbus_code_enum *code) |
| { |
| if (code->index >= ARRAY_SIZE(noon010_formats)) |
| return -EINVAL; |
| |
| code->code = noon010_formats[code->index].code; |
| return 0; |
| } |
| |
| static int noon010_get_fmt(struct v4l2_subdev *sd, |
| struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct noon010_info *info = to_noon010(sd); |
| struct v4l2_mbus_framefmt *mf; |
| |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| if (cfg) { |
| mf = v4l2_subdev_get_try_format(sd, cfg, 0); |
| fmt->format = *mf; |
| } |
| return 0; |
| } |
| mf = &fmt->format; |
| |
| mutex_lock(&info->lock); |
| mf->width = info->curr_win->width; |
| mf->height = info->curr_win->height; |
| mf->code = info->curr_fmt->code; |
| mf->colorspace = info->curr_fmt->colorspace; |
| mf->field = V4L2_FIELD_NONE; |
| |
| mutex_unlock(&info->lock); |
| return 0; |
| } |
| |
| /* Return nearest media bus frame format. */ |
| static const struct noon010_format *noon010_try_fmt(struct v4l2_subdev *sd, |
| struct v4l2_mbus_framefmt *mf) |
| { |
| int i = ARRAY_SIZE(noon010_formats); |
| |
| while (--i) |
| if (mf->code == noon010_formats[i].code) |
| break; |
| mf->code = noon010_formats[i].code; |
| |
| return &noon010_formats[i]; |
| } |
| |
| static int noon010_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_pad_config *cfg, |
| struct v4l2_subdev_format *fmt) |
| { |
| struct noon010_info *info = to_noon010(sd); |
| const struct noon010_frmsize *size = NULL; |
| const struct noon010_format *nf; |
| struct v4l2_mbus_framefmt *mf; |
| int ret = 0; |
| |
| nf = noon010_try_fmt(sd, &fmt->format); |
| noon010_try_frame_size(&fmt->format, &size); |
| fmt->format.colorspace = V4L2_COLORSPACE_JPEG; |
| fmt->format.field = V4L2_FIELD_NONE; |
| |
| if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { |
| if (cfg) { |
| mf = v4l2_subdev_get_try_format(sd, cfg, 0); |
| *mf = fmt->format; |
| } |
| return 0; |
| } |
| mutex_lock(&info->lock); |
| if (!info->streaming) { |
| info->apply_new_cfg = 1; |
| info->curr_fmt = nf; |
| info->curr_win = size; |
| } else { |
| ret = -EBUSY; |
| } |
| mutex_unlock(&info->lock); |
| return ret; |
| } |
| |
| /* Called with struct noon010_info.lock mutex held */ |
| static int noon010_base_config(struct v4l2_subdev *sd) |
| { |
| int ret = noon010_bulk_write_reg(sd, noon010_base_regs); |
| if (!ret) |
| ret = noon010_set_params(sd); |
| if (!ret) |
| ret = noon010_set_flip(sd, 1, 0); |
| |
| return ret; |
| } |
| |
| static int noon010_s_power(struct v4l2_subdev *sd, int on) |
| { |
| struct noon010_info *info = to_noon010(sd); |
| int ret; |
| |
| mutex_lock(&info->lock); |
| if (on) { |
| ret = power_enable(info); |
| if (!ret) |
| ret = noon010_base_config(sd); |
| } else { |
| noon010_power_ctrl(sd, false, true); |
| ret = power_disable(info); |
| } |
| mutex_unlock(&info->lock); |
| |
| /* Restore the controls state */ |
| if (!ret && on) |
| ret = v4l2_ctrl_handler_setup(&info->hdl); |
| |
| return ret; |
| } |
| |
| static int noon010_s_stream(struct v4l2_subdev *sd, int on) |
| { |
| struct noon010_info *info = to_noon010(sd); |
| int ret = 0; |
| |
| mutex_lock(&info->lock); |
| if (!info->streaming != !on) { |
| ret = noon010_power_ctrl(sd, false, !on); |
| if (!ret) |
| info->streaming = on; |
| } |
| if (!ret && on && info->apply_new_cfg) { |
| ret = noon010_set_params(sd); |
| if (!ret) |
| info->apply_new_cfg = 0; |
| } |
| mutex_unlock(&info->lock); |
| return ret; |
| } |
| |
| static int noon010_log_status(struct v4l2_subdev *sd) |
| { |
| struct noon010_info *info = to_noon010(sd); |
| |
| v4l2_ctrl_handler_log_status(&info->hdl, sd->name); |
| return 0; |
| } |
| |
| static int noon010_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) |
| { |
| struct v4l2_mbus_framefmt *mf = v4l2_subdev_get_try_format(sd, fh->pad, 0); |
| |
| mf->width = noon010_sizes[0].width; |
| mf->height = noon010_sizes[0].height; |
| mf->code = noon010_formats[0].code; |
| mf->colorspace = V4L2_COLORSPACE_JPEG; |
| mf->field = V4L2_FIELD_NONE; |
| return 0; |
| } |
| |
| static const struct v4l2_subdev_internal_ops noon010_subdev_internal_ops = { |
| .open = noon010_open, |
| }; |
| |
| static const struct v4l2_ctrl_ops noon010_ctrl_ops = { |
| .s_ctrl = noon010_s_ctrl, |
| }; |
| |
| static const struct v4l2_subdev_core_ops noon010_core_ops = { |
| .s_power = noon010_s_power, |
| .log_status = noon010_log_status, |
| }; |
| |
| static const struct v4l2_subdev_pad_ops noon010_pad_ops = { |
| .enum_mbus_code = noon010_enum_mbus_code, |
| .get_fmt = noon010_get_fmt, |
| .set_fmt = noon010_set_fmt, |
| }; |
| |
| static const struct v4l2_subdev_video_ops noon010_video_ops = { |
| .s_stream = noon010_s_stream, |
| }; |
| |
| static const struct v4l2_subdev_ops noon010_ops = { |
| .core = &noon010_core_ops, |
| .pad = &noon010_pad_ops, |
| .video = &noon010_video_ops, |
| }; |
| |
| /* Return 0 if NOON010PC30L sensor type was detected or -ENODEV otherwise. */ |
| static int noon010_detect(struct i2c_client *client, struct noon010_info *info) |
| { |
| int ret; |
| |
| ret = power_enable(info); |
| if (ret) |
| return ret; |
| |
| ret = i2c_smbus_read_byte_data(client, DEVICE_ID_REG); |
| if (ret < 0) |
| dev_err(&client->dev, "I2C read failed: 0x%X\n", ret); |
| |
| power_disable(info); |
| |
| return ret == NOON010PC30_ID ? 0 : -ENODEV; |
| } |
| |
| static int noon010_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct noon010_info *info; |
| struct v4l2_subdev *sd; |
| const struct noon010pc30_platform_data *pdata |
| = client->dev.platform_data; |
| int ret; |
| int i; |
| |
| if (!pdata) { |
| dev_err(&client->dev, "No platform data!\n"); |
| return -EIO; |
| } |
| |
| info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL); |
| if (!info) |
| return -ENOMEM; |
| |
| mutex_init(&info->lock); |
| sd = &info->sd; |
| v4l2_i2c_subdev_init(sd, client, &noon010_ops); |
| strlcpy(sd->name, MODULE_NAME, sizeof(sd->name)); |
| |
| sd->internal_ops = &noon010_subdev_internal_ops; |
| sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; |
| |
| v4l2_ctrl_handler_init(&info->hdl, 3); |
| |
| v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, |
| V4L2_CID_AUTO_WHITE_BALANCE, 0, 1, 1, 1); |
| v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, |
| V4L2_CID_RED_BALANCE, 0, 127, 1, 64); |
| v4l2_ctrl_new_std(&info->hdl, &noon010_ctrl_ops, |
| V4L2_CID_BLUE_BALANCE, 0, 127, 1, 64); |
| |
| sd->ctrl_handler = &info->hdl; |
| |
| ret = info->hdl.error; |
| if (ret) |
| goto np_err; |
| |
| info->i2c_reg_page = -1; |
| info->gpio_nreset = -EINVAL; |
| info->gpio_nstby = -EINVAL; |
| info->curr_fmt = &noon010_formats[0]; |
| info->curr_win = &noon010_sizes[0]; |
| |
| if (gpio_is_valid(pdata->gpio_nreset)) { |
| ret = devm_gpio_request_one(&client->dev, pdata->gpio_nreset, |
| GPIOF_OUT_INIT_LOW, |
| "NOON010PC30 NRST"); |
| if (ret) { |
| dev_err(&client->dev, "GPIO request error: %d\n", ret); |
| goto np_err; |
| } |
| info->gpio_nreset = pdata->gpio_nreset; |
| gpio_export(info->gpio_nreset, 0); |
| } |
| |
| if (gpio_is_valid(pdata->gpio_nstby)) { |
| ret = devm_gpio_request_one(&client->dev, pdata->gpio_nstby, |
| GPIOF_OUT_INIT_LOW, |
| "NOON010PC30 NSTBY"); |
| if (ret) { |
| dev_err(&client->dev, "GPIO request error: %d\n", ret); |
| goto np_err; |
| } |
| info->gpio_nstby = pdata->gpio_nstby; |
| gpio_export(info->gpio_nstby, 0); |
| } |
| |
| for (i = 0; i < NOON010_NUM_SUPPLIES; i++) |
| info->supply[i].supply = noon010_supply_name[i]; |
| |
| ret = devm_regulator_bulk_get(&client->dev, NOON010_NUM_SUPPLIES, |
| info->supply); |
| if (ret) |
| goto np_err; |
| |
| info->pad.flags = MEDIA_PAD_FL_SOURCE; |
| sd->entity.function = MEDIA_ENT_F_CAM_SENSOR; |
| ret = media_entity_pads_init(&sd->entity, 1, &info->pad); |
| if (ret < 0) |
| goto np_err; |
| |
| ret = noon010_detect(client, info); |
| if (!ret) |
| return 0; |
| |
| np_err: |
| v4l2_ctrl_handler_free(&info->hdl); |
| v4l2_device_unregister_subdev(sd); |
| return ret; |
| } |
| |
| static int noon010_remove(struct i2c_client *client) |
| { |
| struct v4l2_subdev *sd = i2c_get_clientdata(client); |
| struct noon010_info *info = to_noon010(sd); |
| |
| v4l2_device_unregister_subdev(sd); |
| v4l2_ctrl_handler_free(&info->hdl); |
| media_entity_cleanup(&sd->entity); |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id noon010_id[] = { |
| { MODULE_NAME, 0 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(i2c, noon010_id); |
| |
| |
| static struct i2c_driver noon010_i2c_driver = { |
| .driver = { |
| .name = MODULE_NAME |
| }, |
| .probe = noon010_probe, |
| .remove = noon010_remove, |
| .id_table = noon010_id, |
| }; |
| |
| module_i2c_driver(noon010_i2c_driver); |
| |
| MODULE_DESCRIPTION("Siliconfile NOON010PC30 camera driver"); |
| MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>"); |
| MODULE_LICENSE("GPL"); |