drivers/net/ethernet/arc/emac.h - arm/linux - Git at Google

 /*
  * Copyright (C) 2004-2013 Synopsys, Inc. (www.synopsys.com)
  *
  * Registers and bits definitions of ARC EMAC
  */

 #ifndef ARC_EMAC_H
 #define ARC_EMAC_H

 #include <linux/device.h>
 #include <linux/dma-mapping.h>
 #include <linux/netdevice.h>
 #include <linux/phy.h>
 #include <linux/clk.h>

 /* STATUS and ENABLE Register bit masks */
 #define TXINT_MASK	(1 << 0)	/* Transmit interrupt */
 #define RXINT_MASK	(1 << 1)	/* Receive interrupt */
 #define ERR_MASK	(1 << 2)	/* Error interrupt */
 #define TXCH_MASK	(1 << 3)	/* Transmit chaining error interrupt */
 #define MSER_MASK	(1 << 4)	/* Missed packet counter error */
 #define RXCR_MASK	(1 << 8)	/* RXCRCERR counter rolled over  */
 #define RXFR_MASK	(1 << 9)	/* RXFRAMEERR counter rolled over */
 #define RXFL_MASK	(1 << 10)	/* RXOFLOWERR counter rolled over */
 #define MDIO_MASK	(1 << 12)	/* MDIO complete interrupt */
 #define TXPL_MASK	(1 << 31)	/* Force polling of BD by EMAC */

 /* CONTROL Register bit masks */
 #define EN_MASK		(1 << 0)	/* VMAC enable */
 #define TXRN_MASK	(1 << 3)	/* TX enable */
 #define RXRN_MASK	(1 << 4)	/* RX enable */
 #define DSBC_MASK	(1 << 8)	/* Disable receive broadcast */
 #define ENFL_MASK	(1 << 10)	/* Enable Full-duplex */
 #define PROM_MASK	(1 << 11)	/* Promiscuous mode */

 /* Buffer descriptor INFO bit masks */
 #define OWN_MASK	(1 << 31)	/* 0-CPU or 1-EMAC owns buffer */
 #define FIRST_MASK	(1 << 16)	/* First buffer in chain */
 #define LAST_MASK	(1 << 17)	/* Last buffer in chain */
 #define LEN_MASK	0x000007FF	/* last 11 bits */
 #define CRLS		(1 << 21)
 #define DEFR		(1 << 22)
 #define DROP		(1 << 23)
 #define RTRY		(1 << 24)
 #define LTCL		(1 << 28)
 #define UFLO		(1 << 29)

 #define FOR_EMAC	OWN_MASK
 #define FOR_CPU		0

 /* ARC EMAC register set combines entries for MAC and MDIO */
 enum {
 	R_ID = 0,
 	R_STATUS,
 	R_ENABLE,
 	R_CTRL,
 	R_POLLRATE,
 	R_RXERR,
 	R_MISS,
 	R_TX_RING,
 	R_RX_RING,
 	R_ADDRL,
 	R_ADDRH,
 	R_LAFL,
 	R_LAFH,
 	R_MDIO,
 };

 #define TX_TIMEOUT		(400 * HZ / 1000) /* Transmission timeout */

 #define ARC_EMAC_NAPI_WEIGHT	40		/* Workload for NAPI */

 #define EMAC_BUFFER_SIZE	1536		/* EMAC buffer size */

 /**
  * struct arc_emac_bd - EMAC buffer descriptor (BD).
  *
  * @info:	Contains status information on the buffer itself.
  * @data:	32-bit byte addressable pointer to the packet data.
  */
 struct arc_emac_bd {
 	__le32 info;
 	dma_addr_t data;
 };

 /* Number of Rx/Tx BD's */
 #define RX_BD_NUM	128
 #define TX_BD_NUM	128

 #define RX_RING_SZ	(RX_BD_NUM * sizeof(struct arc_emac_bd))
 #define TX_RING_SZ	(TX_BD_NUM * sizeof(struct arc_emac_bd))

 /**
  * struct buffer_state - Stores Rx/Tx buffer state.
  * @sk_buff:	Pointer to socket buffer.
  * @addr:	Start address of DMA-mapped memory region.
  * @len:	Length of DMA-mapped memory region.
  */
 struct buffer_state {
 	struct sk_buff *skb;
 	DEFINE_DMA_UNMAP_ADDR(addr);
 	DEFINE_DMA_UNMAP_LEN(len);
 };

 struct arc_emac_mdio_bus_data {
 	struct gpio_desc *reset_gpio;
 	int msec;
 };

 /**
  * struct arc_emac_priv - Storage of EMAC's private information.
  * @dev:	Pointer to the current device.
  * @phy_dev:	Pointer to attached PHY device.
  * @bus:	Pointer to the current MII bus.
  * @regs:	Base address of EMAC memory-mapped control registers.
  * @napi:	Structure for NAPI.
  * @rxbd:	Pointer to Rx BD ring.
  * @txbd:	Pointer to Tx BD ring.
  * @rxbd_dma:	DMA handle for Rx BD ring.
  * @txbd_dma:	DMA handle for Tx BD ring.
  * @rx_buff:	Storage for Rx buffers states.
  * @tx_buff:	Storage for Tx buffers states.
  * @txbd_curr:	Index of Tx BD to use on the next "ndo_start_xmit".
  * @txbd_dirty:	Index of Tx BD to free on the next Tx interrupt.
  * @last_rx_bd:	Index of the last Rx BD we've got from EMAC.
  * @link:	PHY's last seen link state.
  * @duplex:	PHY's last set duplex mode.
  * @speed:	PHY's last set speed.
  */
 struct arc_emac_priv {
 	const char *drv_name;
 	const char *drv_version;
 	void (*set_mac_speed)(void *priv, unsigned int speed);

 	/* Devices */
 	struct device *dev;
 	struct mii_bus *bus;
 	struct arc_emac_mdio_bus_data bus_data;

 	void __iomem *regs;
 	struct clk *clk;

 	struct napi_struct napi;

 	struct arc_emac_bd *rxbd;
 	struct arc_emac_bd *txbd;

 	dma_addr_t rxbd_dma;
 	dma_addr_t txbd_dma;

 	struct buffer_state rx_buff[RX_BD_NUM];
 	struct buffer_state tx_buff[TX_BD_NUM];
 	unsigned int txbd_curr;
 	unsigned int txbd_dirty;

 	unsigned int last_rx_bd;

 	unsigned int link;
 	unsigned int duplex;
 	unsigned int speed;
 };

 /**
  * arc_reg_set - Sets EMAC register with provided value.
  * @priv:	Pointer to ARC EMAC private data structure.
  * @reg:	Register offset from base address.
  * @value:	Value to set in register.
  */
 static inline void arc_reg_set(struct arc_emac_priv *priv, int reg, int value)
 {
 	iowrite32(value, priv->regs + reg * sizeof(int));
 }

 /**
  * arc_reg_get - Gets value of specified EMAC register.
  * @priv:	Pointer to ARC EMAC private data structure.
  * @reg:	Register offset from base address.
  *
  * returns:	Value of requested register.
  */
 static inline unsigned int arc_reg_get(struct arc_emac_priv *priv, int reg)
 {
 	return ioread32(priv->regs + reg * sizeof(int));
 }

 /**
  * arc_reg_or - Applies mask to specified EMAC register - ("reg" | "mask").
  * @priv:	Pointer to ARC EMAC private data structure.
  * @reg:	Register offset from base address.
  * @mask:	Mask to apply to specified register.
  *
  * This function reads initial register value, then applies provided mask
  * to it and then writes register back.
  */
 static inline void arc_reg_or(struct arc_emac_priv *priv, int reg, int mask)
 {
 	unsigned int value = arc_reg_get(priv, reg);

 	arc_reg_set(priv, reg, value | mask);
 }

 /**
  * arc_reg_clr - Applies mask to specified EMAC register - ("reg" & ~"mask").
  * @priv:	Pointer to ARC EMAC private data structure.
  * @reg:	Register offset from base address.
  * @mask:	Mask to apply to specified register.
  *
  * This function reads initial register value, then applies provided mask
  * to it and then writes register back.
  */
 static inline void arc_reg_clr(struct arc_emac_priv *priv, int reg, int mask)
 {
 	unsigned int value = arc_reg_get(priv, reg);

 	arc_reg_set(priv, reg, value & ~mask);
 }

 int arc_mdio_probe(struct arc_emac_priv *priv);
 int arc_mdio_remove(struct arc_emac_priv *priv);
 int arc_emac_probe(struct net_device *ndev, int interface);
 int arc_emac_remove(struct net_device *ndev);

 #endif /* ARC_EMAC_H */
	/*
	* Copyright (C) 2004-2013 Synopsys, Inc. (www.synopsys.com)
	*
	* Registers and bits definitions of ARC EMAC
	*/

	#ifndef ARC_EMAC_H
	#define ARC_EMAC_H

	#include <linux/device.h>
	#include <linux/dma-mapping.h>
	#include <linux/netdevice.h>
	#include <linux/phy.h>
	#include <linux/clk.h>

	/* STATUS and ENABLE Register bit masks */
	#define TXINT_MASK (1 << 0) /* Transmit interrupt */
	#define RXINT_MASK (1 << 1) /* Receive interrupt */
	#define ERR_MASK (1 << 2) /* Error interrupt */
	#define TXCH_MASK (1 << 3) /* Transmit chaining error interrupt */
	#define MSER_MASK (1 << 4) /* Missed packet counter error */
	#define RXCR_MASK (1 << 8) /* RXCRCERR counter rolled over */
	#define RXFR_MASK (1 << 9) /* RXFRAMEERR counter rolled over */
	#define RXFL_MASK (1 << 10) /* RXOFLOWERR counter rolled over */
	#define MDIO_MASK (1 << 12) /* MDIO complete interrupt */
	#define TXPL_MASK (1 << 31) /* Force polling of BD by EMAC */

	/* CONTROL Register bit masks */
	#define EN_MASK (1 << 0) /* VMAC enable */
	#define TXRN_MASK (1 << 3) /* TX enable */
	#define RXRN_MASK (1 << 4) /* RX enable */
	#define DSBC_MASK (1 << 8) /* Disable receive broadcast */
	#define ENFL_MASK (1 << 10) /* Enable Full-duplex */
	#define PROM_MASK (1 << 11) /* Promiscuous mode */

	/* Buffer descriptor INFO bit masks */
	#define OWN_MASK (1 << 31) /* 0-CPU or 1-EMAC owns buffer */
	#define FIRST_MASK (1 << 16) /* First buffer in chain */
	#define LAST_MASK (1 << 17) /* Last buffer in chain */
	#define LEN_MASK 0x000007FF /* last 11 bits */
	#define CRLS (1 << 21)
	#define DEFR (1 << 22)
	#define DROP (1 << 23)
	#define RTRY (1 << 24)
	#define LTCL (1 << 28)
	#define UFLO (1 << 29)

	#define FOR_EMAC OWN_MASK
	#define FOR_CPU 0

	/* ARC EMAC register set combines entries for MAC and MDIO */
	enum {
	R_ID = 0,
	R_STATUS,
	R_ENABLE,
	R_CTRL,
	R_POLLRATE,
	R_RXERR,
	R_MISS,
	R_TX_RING,
	R_RX_RING,
	R_ADDRL,
	R_ADDRH,
	R_LAFL,
	R_LAFH,
	R_MDIO,
	};

	#define TX_TIMEOUT (400 * HZ / 1000) /* Transmission timeout */

	#define ARC_EMAC_NAPI_WEIGHT 40 /* Workload for NAPI */

	#define EMAC_BUFFER_SIZE 1536 /* EMAC buffer size */

	/**
	* struct arc_emac_bd - EMAC buffer descriptor (BD).
	*
	* @info: Contains status information on the buffer itself.
	* @data: 32-bit byte addressable pointer to the packet data.
	*/
	struct arc_emac_bd {
	__le32 info;
	dma_addr_t data;
	};

	/* Number of Rx/Tx BD's */
	#define RX_BD_NUM 128
	#define TX_BD_NUM 128

	#define RX_RING_SZ (RX_BD_NUM * sizeof(struct arc_emac_bd))
	#define TX_RING_SZ (TX_BD_NUM * sizeof(struct arc_emac_bd))

	/**
	* struct buffer_state - Stores Rx/Tx buffer state.
	* @sk_buff: Pointer to socket buffer.
	* @addr: Start address of DMA-mapped memory region.
	* @len: Length of DMA-mapped memory region.
	*/
	struct buffer_state {
	struct sk_buff *skb;
	DEFINE_DMA_UNMAP_ADDR(addr);
	DEFINE_DMA_UNMAP_LEN(len);
	};

	struct arc_emac_mdio_bus_data {
	struct gpio_desc *reset_gpio;
	int msec;
	};

	/**
	* struct arc_emac_priv - Storage of EMAC's private information.
	* @dev: Pointer to the current device.
	* @phy_dev: Pointer to attached PHY device.
	* @bus: Pointer to the current MII bus.
	* @regs: Base address of EMAC memory-mapped control registers.
	* @napi: Structure for NAPI.
	* @rxbd: Pointer to Rx BD ring.
	* @txbd: Pointer to Tx BD ring.
	* @rxbd_dma: DMA handle for Rx BD ring.
	* @txbd_dma: DMA handle for Tx BD ring.
	* @rx_buff: Storage for Rx buffers states.
	* @tx_buff: Storage for Tx buffers states.
	* @txbd_curr: Index of Tx BD to use on the next "ndo_start_xmit".
	* @txbd_dirty: Index of Tx BD to free on the next Tx interrupt.
	* @last_rx_bd: Index of the last Rx BD we've got from EMAC.
	* @link: PHY's last seen link state.
	* @duplex: PHY's last set duplex mode.
	* @speed: PHY's last set speed.
	*/
	struct arc_emac_priv {
	const char *drv_name;
	const char *drv_version;
	void (set_mac_speed)(void priv, unsigned int speed);

	/* Devices */
	struct device *dev;
	struct mii_bus *bus;
	struct arc_emac_mdio_bus_data bus_data;

	void __iomem *regs;
	struct clk *clk;

	struct napi_struct napi;

	struct arc_emac_bd *rxbd;
	struct arc_emac_bd *txbd;

	dma_addr_t rxbd_dma;
	dma_addr_t txbd_dma;

	struct buffer_state rx_buff[RX_BD_NUM];
	struct buffer_state tx_buff[TX_BD_NUM];
	unsigned int txbd_curr;
	unsigned int txbd_dirty;

	unsigned int last_rx_bd;

	unsigned int link;
	unsigned int duplex;
	unsigned int speed;
	};

	/**
	* arc_reg_set - Sets EMAC register with provided value.
	* @priv: Pointer to ARC EMAC private data structure.
	* @reg: Register offset from base address.
	* @value: Value to set in register.
	*/
	static inline void arc_reg_set(struct arc_emac_priv *priv, int reg, int value)
	{
	iowrite32(value, priv->regs + reg * sizeof(int));
	}

	/**
	* arc_reg_get - Gets value of specified EMAC register.
	* @priv: Pointer to ARC EMAC private data structure.
	* @reg: Register offset from base address.
	*
	* returns: Value of requested register.
	*/
	static inline unsigned int arc_reg_get(struct arc_emac_priv *priv, int reg)
	{
	return ioread32(priv->regs + reg * sizeof(int));
	}

	/**
	* arc_reg_or - Applies mask to specified EMAC register - ("reg" \| "mask").
	* @priv: Pointer to ARC EMAC private data structure.
	* @reg: Register offset from base address.
	* @mask: Mask to apply to specified register.
	*
	* This function reads initial register value, then applies provided mask
	* to it and then writes register back.
	*/
	static inline void arc_reg_or(struct arc_emac_priv *priv, int reg, int mask)
	{
	unsigned int value = arc_reg_get(priv, reg);

	arc_reg_set(priv, reg, value \| mask);
	}

	/**
	* arc_reg_clr - Applies mask to specified EMAC register - ("reg" & ~"mask").
	* @priv: Pointer to ARC EMAC private data structure.
	* @reg: Register offset from base address.
	* @mask: Mask to apply to specified register.
	*
	* This function reads initial register value, then applies provided mask
	* to it and then writes register back.
	*/
	static inline void arc_reg_clr(struct arc_emac_priv *priv, int reg, int mask)
	{
	unsigned int value = arc_reg_get(priv, reg);

	arc_reg_set(priv, reg, value & ~mask);
	}

	int arc_mdio_probe(struct arc_emac_priv *priv);
	int arc_mdio_remove(struct arc_emac_priv *priv);
	int arc_emac_probe(struct net_device *ndev, int interface);
	int arc_emac_remove(struct net_device *ndev);

	#endif /* ARC_EMAC_H */