| /**************************************************************************** |
| * Driver for Solarflare network controllers and boards |
| * Copyright 2011-2013 Solarflare Communications Inc. |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License version 2 as published |
| * by the Free Software Foundation, incorporated herein by reference. |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/slab.h> |
| #include <linux/hwmon.h> |
| #include <linux/stat.h> |
| |
| #include "net_driver.h" |
| #include "mcdi.h" |
| #include "mcdi_pcol.h" |
| #include "nic.h" |
| |
| enum efx_hwmon_type { |
| EFX_HWMON_UNKNOWN, |
| EFX_HWMON_TEMP, /* temperature */ |
| EFX_HWMON_COOL, /* cooling device, probably a heatsink */ |
| EFX_HWMON_IN, /* voltage */ |
| EFX_HWMON_CURR, /* current */ |
| EFX_HWMON_POWER, /* power */ |
| EFX_HWMON_TYPES_COUNT |
| }; |
| |
| static const char *const efx_hwmon_unit[EFX_HWMON_TYPES_COUNT] = { |
| [EFX_HWMON_TEMP] = " degC", |
| [EFX_HWMON_COOL] = " rpm", /* though nonsense for a heatsink */ |
| [EFX_HWMON_IN] = " mV", |
| [EFX_HWMON_CURR] = " mA", |
| [EFX_HWMON_POWER] = " W", |
| }; |
| |
| static const struct { |
| const char *label; |
| enum efx_hwmon_type hwmon_type; |
| int port; |
| } efx_mcdi_sensor_type[] = { |
| #define SENSOR(name, label, hwmon_type, port) \ |
| [MC_CMD_SENSOR_##name] = { label, EFX_HWMON_ ## hwmon_type, port } |
| SENSOR(CONTROLLER_TEMP, "Controller board temp.", TEMP, -1), |
| SENSOR(PHY_COMMON_TEMP, "PHY temp.", TEMP, -1), |
| SENSOR(CONTROLLER_COOLING, "Controller heat sink", COOL, -1), |
| SENSOR(PHY0_TEMP, "PHY temp.", TEMP, 0), |
| SENSOR(PHY0_COOLING, "PHY heat sink", COOL, 0), |
| SENSOR(PHY1_TEMP, "PHY temp.", TEMP, 1), |
| SENSOR(PHY1_COOLING, "PHY heat sink", COOL, 1), |
| SENSOR(IN_1V0, "1.0V supply", IN, -1), |
| SENSOR(IN_1V2, "1.2V supply", IN, -1), |
| SENSOR(IN_1V8, "1.8V supply", IN, -1), |
| SENSOR(IN_2V5, "2.5V supply", IN, -1), |
| SENSOR(IN_3V3, "3.3V supply", IN, -1), |
| SENSOR(IN_12V0, "12.0V supply", IN, -1), |
| SENSOR(IN_1V2A, "1.2V analogue supply", IN, -1), |
| SENSOR(IN_VREF, "Ref. voltage", IN, -1), |
| SENSOR(OUT_VAOE, "AOE FPGA supply", IN, -1), |
| SENSOR(AOE_TEMP, "AOE FPGA temp.", TEMP, -1), |
| SENSOR(PSU_AOE_TEMP, "AOE regulator temp.", TEMP, -1), |
| SENSOR(PSU_TEMP, "Controller regulator temp.", |
| TEMP, -1), |
| SENSOR(FAN_0, "Fan 0", COOL, -1), |
| SENSOR(FAN_1, "Fan 1", COOL, -1), |
| SENSOR(FAN_2, "Fan 2", COOL, -1), |
| SENSOR(FAN_3, "Fan 3", COOL, -1), |
| SENSOR(FAN_4, "Fan 4", COOL, -1), |
| SENSOR(IN_VAOE, "AOE input supply", IN, -1), |
| SENSOR(OUT_IAOE, "AOE output current", CURR, -1), |
| SENSOR(IN_IAOE, "AOE input current", CURR, -1), |
| SENSOR(NIC_POWER, "Board power use", POWER, -1), |
| SENSOR(IN_0V9, "0.9V supply", IN, -1), |
| SENSOR(IN_I0V9, "0.9V supply current", CURR, -1), |
| SENSOR(IN_I1V2, "1.2V supply current", CURR, -1), |
| SENSOR(IN_0V9_ADC, "0.9V supply (ext. ADC)", IN, -1), |
| SENSOR(CONTROLLER_2_TEMP, "Controller board temp. 2", TEMP, -1), |
| SENSOR(VREG_INTERNAL_TEMP, "Regulator die temp.", TEMP, -1), |
| SENSOR(VREG_0V9_TEMP, "0.9V regulator temp.", TEMP, -1), |
| SENSOR(VREG_1V2_TEMP, "1.2V regulator temp.", TEMP, -1), |
| SENSOR(CONTROLLER_VPTAT, |
| "Controller PTAT voltage (int. ADC)", IN, -1), |
| SENSOR(CONTROLLER_INTERNAL_TEMP, |
| "Controller die temp. (int. ADC)", TEMP, -1), |
| SENSOR(CONTROLLER_VPTAT_EXTADC, |
| "Controller PTAT voltage (ext. ADC)", IN, -1), |
| SENSOR(CONTROLLER_INTERNAL_TEMP_EXTADC, |
| "Controller die temp. (ext. ADC)", TEMP, -1), |
| SENSOR(AMBIENT_TEMP, "Ambient temp.", TEMP, -1), |
| SENSOR(AIRFLOW, "Air flow raw", IN, -1), |
| SENSOR(VDD08D_VSS08D_CSR, "0.9V die (int. ADC)", IN, -1), |
| SENSOR(VDD08D_VSS08D_CSR_EXTADC, "0.9V die (ext. ADC)", IN, -1), |
| SENSOR(HOTPOINT_TEMP, "Controller board temp. (hotpoint)", TEMP, -1), |
| #undef SENSOR |
| }; |
| |
| static const char *const sensor_status_names[] = { |
| [MC_CMD_SENSOR_STATE_OK] = "OK", |
| [MC_CMD_SENSOR_STATE_WARNING] = "Warning", |
| [MC_CMD_SENSOR_STATE_FATAL] = "Fatal", |
| [MC_CMD_SENSOR_STATE_BROKEN] = "Device failure", |
| [MC_CMD_SENSOR_STATE_NO_READING] = "No reading", |
| }; |
| |
| void efx_mcdi_sensor_event(struct efx_nic *efx, efx_qword_t *ev) |
| { |
| unsigned int type, state, value; |
| enum efx_hwmon_type hwmon_type = EFX_HWMON_UNKNOWN; |
| const char *name = NULL, *state_txt, *unit; |
| |
| type = EFX_QWORD_FIELD(*ev, MCDI_EVENT_SENSOREVT_MONITOR); |
| state = EFX_QWORD_FIELD(*ev, MCDI_EVENT_SENSOREVT_STATE); |
| value = EFX_QWORD_FIELD(*ev, MCDI_EVENT_SENSOREVT_VALUE); |
| |
| /* Deal gracefully with the board having more drivers than we |
| * know about, but do not expect new sensor states. */ |
| if (type < ARRAY_SIZE(efx_mcdi_sensor_type)) { |
| name = efx_mcdi_sensor_type[type].label; |
| hwmon_type = efx_mcdi_sensor_type[type].hwmon_type; |
| } |
| if (!name) |
| name = "No sensor name available"; |
| EFX_WARN_ON_PARANOID(state >= ARRAY_SIZE(sensor_status_names)); |
| state_txt = sensor_status_names[state]; |
| EFX_WARN_ON_PARANOID(hwmon_type >= EFX_HWMON_TYPES_COUNT); |
| unit = efx_hwmon_unit[hwmon_type]; |
| if (!unit) |
| unit = ""; |
| |
| netif_err(efx, hw, efx->net_dev, |
| "Sensor %d (%s) reports condition '%s' for value %d%s\n", |
| type, name, state_txt, value, unit); |
| } |
| |
| #ifdef CONFIG_SFC_MCDI_MON |
| |
| struct efx_mcdi_mon_attribute { |
| struct device_attribute dev_attr; |
| unsigned int index; |
| unsigned int type; |
| enum efx_hwmon_type hwmon_type; |
| unsigned int limit_value; |
| char name[12]; |
| }; |
| |
| static int efx_mcdi_mon_update(struct efx_nic *efx) |
| { |
| struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx); |
| MCDI_DECLARE_BUF(inbuf, MC_CMD_READ_SENSORS_EXT_IN_LEN); |
| int rc; |
| |
| MCDI_SET_QWORD(inbuf, READ_SENSORS_EXT_IN_DMA_ADDR, |
| hwmon->dma_buf.dma_addr); |
| MCDI_SET_DWORD(inbuf, READ_SENSORS_EXT_IN_LENGTH, hwmon->dma_buf.len); |
| |
| rc = efx_mcdi_rpc(efx, MC_CMD_READ_SENSORS, |
| inbuf, sizeof(inbuf), NULL, 0, NULL); |
| if (rc == 0) |
| hwmon->last_update = jiffies; |
| return rc; |
| } |
| |
| static int efx_mcdi_mon_get_entry(struct device *dev, unsigned int index, |
| efx_dword_t *entry) |
| { |
| struct efx_nic *efx = dev_get_drvdata(dev->parent); |
| struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx); |
| int rc; |
| |
| BUILD_BUG_ON(MC_CMD_READ_SENSORS_OUT_LEN != 0); |
| |
| mutex_lock(&hwmon->update_lock); |
| |
| /* Use cached value if last update was < 1 s ago */ |
| if (time_before(jiffies, hwmon->last_update + HZ)) |
| rc = 0; |
| else |
| rc = efx_mcdi_mon_update(efx); |
| |
| /* Copy out the requested entry */ |
| *entry = ((efx_dword_t *)hwmon->dma_buf.addr)[index]; |
| |
| mutex_unlock(&hwmon->update_lock); |
| |
| return rc; |
| } |
| |
| static ssize_t efx_mcdi_mon_show_value(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct efx_mcdi_mon_attribute *mon_attr = |
| container_of(attr, struct efx_mcdi_mon_attribute, dev_attr); |
| efx_dword_t entry; |
| unsigned int value, state; |
| int rc; |
| |
| rc = efx_mcdi_mon_get_entry(dev, mon_attr->index, &entry); |
| if (rc) |
| return rc; |
| |
| state = EFX_DWORD_FIELD(entry, MC_CMD_SENSOR_VALUE_ENTRY_TYPEDEF_STATE); |
| if (state == MC_CMD_SENSOR_STATE_NO_READING) |
| return -EBUSY; |
| |
| value = EFX_DWORD_FIELD(entry, MC_CMD_SENSOR_VALUE_ENTRY_TYPEDEF_VALUE); |
| |
| switch (mon_attr->hwmon_type) { |
| case EFX_HWMON_TEMP: |
| /* Convert temperature from degrees to milli-degrees Celsius */ |
| value *= 1000; |
| break; |
| case EFX_HWMON_POWER: |
| /* Convert power from watts to microwatts */ |
| value *= 1000000; |
| break; |
| default: |
| /* No conversion needed */ |
| break; |
| } |
| |
| return sprintf(buf, "%u\n", value); |
| } |
| |
| static ssize_t efx_mcdi_mon_show_limit(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct efx_mcdi_mon_attribute *mon_attr = |
| container_of(attr, struct efx_mcdi_mon_attribute, dev_attr); |
| unsigned int value; |
| |
| value = mon_attr->limit_value; |
| |
| switch (mon_attr->hwmon_type) { |
| case EFX_HWMON_TEMP: |
| /* Convert temperature from degrees to milli-degrees Celsius */ |
| value *= 1000; |
| break; |
| case EFX_HWMON_POWER: |
| /* Convert power from watts to microwatts */ |
| value *= 1000000; |
| break; |
| default: |
| /* No conversion needed */ |
| break; |
| } |
| |
| return sprintf(buf, "%u\n", value); |
| } |
| |
| static ssize_t efx_mcdi_mon_show_alarm(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct efx_mcdi_mon_attribute *mon_attr = |
| container_of(attr, struct efx_mcdi_mon_attribute, dev_attr); |
| efx_dword_t entry; |
| int state; |
| int rc; |
| |
| rc = efx_mcdi_mon_get_entry(dev, mon_attr->index, &entry); |
| if (rc) |
| return rc; |
| |
| state = EFX_DWORD_FIELD(entry, MC_CMD_SENSOR_VALUE_ENTRY_TYPEDEF_STATE); |
| return sprintf(buf, "%d\n", state != MC_CMD_SENSOR_STATE_OK); |
| } |
| |
| static ssize_t efx_mcdi_mon_show_label(struct device *dev, |
| struct device_attribute *attr, |
| char *buf) |
| { |
| struct efx_mcdi_mon_attribute *mon_attr = |
| container_of(attr, struct efx_mcdi_mon_attribute, dev_attr); |
| return sprintf(buf, "%s\n", |
| efx_mcdi_sensor_type[mon_attr->type].label); |
| } |
| |
| static void |
| efx_mcdi_mon_add_attr(struct efx_nic *efx, const char *name, |
| ssize_t (*reader)(struct device *, |
| struct device_attribute *, char *), |
| unsigned int index, unsigned int type, |
| unsigned int limit_value) |
| { |
| struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx); |
| struct efx_mcdi_mon_attribute *attr = &hwmon->attrs[hwmon->n_attrs]; |
| |
| strlcpy(attr->name, name, sizeof(attr->name)); |
| attr->index = index; |
| attr->type = type; |
| if (type < ARRAY_SIZE(efx_mcdi_sensor_type)) |
| attr->hwmon_type = efx_mcdi_sensor_type[type].hwmon_type; |
| else |
| attr->hwmon_type = EFX_HWMON_UNKNOWN; |
| attr->limit_value = limit_value; |
| sysfs_attr_init(&attr->dev_attr.attr); |
| attr->dev_attr.attr.name = attr->name; |
| attr->dev_attr.attr.mode = S_IRUGO; |
| attr->dev_attr.show = reader; |
| hwmon->group.attrs[hwmon->n_attrs++] = &attr->dev_attr.attr; |
| } |
| |
| int efx_mcdi_mon_probe(struct efx_nic *efx) |
| { |
| unsigned int n_temp = 0, n_cool = 0, n_in = 0, n_curr = 0, n_power = 0; |
| struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx); |
| MCDI_DECLARE_BUF(inbuf, MC_CMD_SENSOR_INFO_EXT_IN_LEN); |
| MCDI_DECLARE_BUF(outbuf, MC_CMD_SENSOR_INFO_OUT_LENMAX); |
| unsigned int n_pages, n_sensors, n_attrs, page; |
| size_t outlen; |
| char name[12]; |
| u32 mask; |
| int rc, i, j, type; |
| |
| /* Find out how many sensors are present */ |
| n_sensors = 0; |
| page = 0; |
| do { |
| MCDI_SET_DWORD(inbuf, SENSOR_INFO_EXT_IN_PAGE, page); |
| |
| rc = efx_mcdi_rpc(efx, MC_CMD_SENSOR_INFO, inbuf, sizeof(inbuf), |
| outbuf, sizeof(outbuf), &outlen); |
| if (rc) |
| return rc; |
| if (outlen < MC_CMD_SENSOR_INFO_OUT_LENMIN) |
| return -EIO; |
| |
| mask = MCDI_DWORD(outbuf, SENSOR_INFO_OUT_MASK); |
| n_sensors += hweight32(mask & ~(1 << MC_CMD_SENSOR_PAGE0_NEXT)); |
| ++page; |
| } while (mask & (1 << MC_CMD_SENSOR_PAGE0_NEXT)); |
| n_pages = page; |
| |
| /* Don't create a device if there are none */ |
| if (n_sensors == 0) |
| return 0; |
| |
| rc = efx_nic_alloc_buffer( |
| efx, &hwmon->dma_buf, |
| n_sensors * MC_CMD_SENSOR_VALUE_ENTRY_TYPEDEF_LEN, |
| GFP_KERNEL); |
| if (rc) |
| return rc; |
| |
| mutex_init(&hwmon->update_lock); |
| efx_mcdi_mon_update(efx); |
| |
| /* Allocate space for the maximum possible number of |
| * attributes for this set of sensors: |
| * value, min, max, crit, alarm and label for each sensor. |
| */ |
| n_attrs = 6 * n_sensors; |
| hwmon->attrs = kcalloc(n_attrs, sizeof(*hwmon->attrs), GFP_KERNEL); |
| if (!hwmon->attrs) { |
| rc = -ENOMEM; |
| goto fail; |
| } |
| hwmon->group.attrs = kcalloc(n_attrs + 1, sizeof(struct attribute *), |
| GFP_KERNEL); |
| if (!hwmon->group.attrs) { |
| rc = -ENOMEM; |
| goto fail; |
| } |
| |
| for (i = 0, j = -1, type = -1; ; i++) { |
| enum efx_hwmon_type hwmon_type; |
| const char *hwmon_prefix; |
| unsigned hwmon_index; |
| u16 min1, max1, min2, max2; |
| |
| /* Find next sensor type or exit if there is none */ |
| do { |
| type++; |
| |
| if ((type % 32) == 0) { |
| page = type / 32; |
| j = -1; |
| if (page == n_pages) |
| goto hwmon_register; |
| |
| MCDI_SET_DWORD(inbuf, SENSOR_INFO_EXT_IN_PAGE, |
| page); |
| rc = efx_mcdi_rpc(efx, MC_CMD_SENSOR_INFO, |
| inbuf, sizeof(inbuf), |
| outbuf, sizeof(outbuf), |
| &outlen); |
| if (rc) |
| goto fail; |
| if (outlen < MC_CMD_SENSOR_INFO_OUT_LENMIN) { |
| rc = -EIO; |
| goto fail; |
| } |
| |
| mask = (MCDI_DWORD(outbuf, |
| SENSOR_INFO_OUT_MASK) & |
| ~(1 << MC_CMD_SENSOR_PAGE0_NEXT)); |
| |
| /* Check again for short response */ |
| if (outlen < |
| MC_CMD_SENSOR_INFO_OUT_LEN(hweight32(mask))) { |
| rc = -EIO; |
| goto fail; |
| } |
| } |
| } while (!(mask & (1 << type % 32))); |
| j++; |
| |
| if (type < ARRAY_SIZE(efx_mcdi_sensor_type)) { |
| hwmon_type = efx_mcdi_sensor_type[type].hwmon_type; |
| |
| /* Skip sensors specific to a different port */ |
| if (hwmon_type != EFX_HWMON_UNKNOWN && |
| efx_mcdi_sensor_type[type].port >= 0 && |
| efx_mcdi_sensor_type[type].port != |
| efx_port_num(efx)) |
| continue; |
| } else { |
| hwmon_type = EFX_HWMON_UNKNOWN; |
| } |
| |
| switch (hwmon_type) { |
| case EFX_HWMON_TEMP: |
| hwmon_prefix = "temp"; |
| hwmon_index = ++n_temp; /* 1-based */ |
| break; |
| case EFX_HWMON_COOL: |
| /* This is likely to be a heatsink, but there |
| * is no convention for representing cooling |
| * devices other than fans. |
| */ |
| hwmon_prefix = "fan"; |
| hwmon_index = ++n_cool; /* 1-based */ |
| break; |
| default: |
| hwmon_prefix = "in"; |
| hwmon_index = n_in++; /* 0-based */ |
| break; |
| case EFX_HWMON_CURR: |
| hwmon_prefix = "curr"; |
| hwmon_index = ++n_curr; /* 1-based */ |
| break; |
| case EFX_HWMON_POWER: |
| hwmon_prefix = "power"; |
| hwmon_index = ++n_power; /* 1-based */ |
| break; |
| } |
| |
| min1 = MCDI_ARRAY_FIELD(outbuf, SENSOR_ENTRY, |
| SENSOR_INFO_ENTRY, j, MIN1); |
| max1 = MCDI_ARRAY_FIELD(outbuf, SENSOR_ENTRY, |
| SENSOR_INFO_ENTRY, j, MAX1); |
| min2 = MCDI_ARRAY_FIELD(outbuf, SENSOR_ENTRY, |
| SENSOR_INFO_ENTRY, j, MIN2); |
| max2 = MCDI_ARRAY_FIELD(outbuf, SENSOR_ENTRY, |
| SENSOR_INFO_ENTRY, j, MAX2); |
| |
| if (min1 != max1) { |
| snprintf(name, sizeof(name), "%s%u_input", |
| hwmon_prefix, hwmon_index); |
| efx_mcdi_mon_add_attr( |
| efx, name, efx_mcdi_mon_show_value, i, type, 0); |
| |
| if (hwmon_type != EFX_HWMON_POWER) { |
| snprintf(name, sizeof(name), "%s%u_min", |
| hwmon_prefix, hwmon_index); |
| efx_mcdi_mon_add_attr( |
| efx, name, efx_mcdi_mon_show_limit, |
| i, type, min1); |
| } |
| |
| snprintf(name, sizeof(name), "%s%u_max", |
| hwmon_prefix, hwmon_index); |
| efx_mcdi_mon_add_attr( |
| efx, name, efx_mcdi_mon_show_limit, |
| i, type, max1); |
| |
| if (min2 != max2) { |
| /* Assume max2 is critical value. |
| * But we have no good way to expose min2. |
| */ |
| snprintf(name, sizeof(name), "%s%u_crit", |
| hwmon_prefix, hwmon_index); |
| efx_mcdi_mon_add_attr( |
| efx, name, efx_mcdi_mon_show_limit, |
| i, type, max2); |
| } |
| } |
| |
| snprintf(name, sizeof(name), "%s%u_alarm", |
| hwmon_prefix, hwmon_index); |
| efx_mcdi_mon_add_attr( |
| efx, name, efx_mcdi_mon_show_alarm, i, type, 0); |
| |
| if (type < ARRAY_SIZE(efx_mcdi_sensor_type) && |
| efx_mcdi_sensor_type[type].label) { |
| snprintf(name, sizeof(name), "%s%u_label", |
| hwmon_prefix, hwmon_index); |
| efx_mcdi_mon_add_attr( |
| efx, name, efx_mcdi_mon_show_label, i, type, 0); |
| } |
| } |
| |
| hwmon_register: |
| hwmon->groups[0] = &hwmon->group; |
| hwmon->device = hwmon_device_register_with_groups(&efx->pci_dev->dev, |
| KBUILD_MODNAME, NULL, |
| hwmon->groups); |
| if (IS_ERR(hwmon->device)) { |
| rc = PTR_ERR(hwmon->device); |
| goto fail; |
| } |
| |
| return 0; |
| |
| fail: |
| efx_mcdi_mon_remove(efx); |
| return rc; |
| } |
| |
| void efx_mcdi_mon_remove(struct efx_nic *efx) |
| { |
| struct efx_mcdi_mon *hwmon = efx_mcdi_mon(efx); |
| |
| if (hwmon->device) |
| hwmon_device_unregister(hwmon->device); |
| kfree(hwmon->attrs); |
| kfree(hwmon->group.attrs); |
| efx_nic_free_buffer(efx, &hwmon->dma_buf); |
| } |
| |
| #endif /* CONFIG_SFC_MCDI_MON */ |