drivers/net/wireless/rsi/rsi_91x_usb.c - arm/linux - Git at Google

 /**
  * Copyright (c) 2014 Redpine Signals Inc.
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  *
  */

 #include <linux/module.h>
 #include "rsi_usb.h"

 /**
  * rsi_usb_card_write() - This function writes to the USB Card.
  * @adapter: Pointer to the adapter structure.
  * @buf: Pointer to the buffer from where the data has to be taken.
  * @len: Length to be written.
  * @endpoint: Type of endpoint.
  *
  * Return: status: 0 on success, a negative error code on failure.
  */
 static int rsi_usb_card_write(struct rsi_hw *adapter,
 			      void *buf,
 			      u16 len,
 			      u8 endpoint)
 {
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 	int status;
 	s32 transfer;

 	status = usb_bulk_msg(dev->usbdev,
 			      usb_sndbulkpipe(dev->usbdev,
 			      dev->bulkout_endpoint_addr[endpoint - 1]),
 			      buf,
 			      len,
 			      &transfer,
 			      HZ * 5);

 	if (status < 0) {
 		rsi_dbg(ERR_ZONE,
 			"Card write failed with error code :%10d\n", status);
 		dev->write_fail = 1;
 	}
 	return status;
 }

 /**
  * rsi_write_multiple() - This function writes multiple bytes of information
  *			  to the USB card.
  * @adapter: Pointer to the adapter structure.
  * @addr: Address of the register.
  * @data: Pointer to the data that has to be written.
  * @count: Number of multiple bytes to be written.
  *
  * Return: 0 on success, a negative error code on failure.
  */
 static int rsi_write_multiple(struct rsi_hw *adapter,
 			      u8 endpoint,
 			      u8 *data,
 			      u32 count)
 {
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 	u8 *seg = dev->tx_buffer;

 	if (dev->write_fail)
 		return 0;

 	if (endpoint == MGMT_EP) {
 		memset(seg, 0, RSI_USB_TX_HEAD_ROOM);
 		memcpy(seg + RSI_USB_TX_HEAD_ROOM, data, count);
 	} else {
 		seg = ((u8 *)data - RSI_USB_TX_HEAD_ROOM);
 	}

 	return rsi_usb_card_write(adapter,
 				  seg,
 				  count + RSI_USB_TX_HEAD_ROOM,
 				  endpoint);
 }

 /**
  * rsi_find_bulk_in_and_out_endpoints() - This function initializes the bulk
  *					  endpoints to the device.
  * @interface: Pointer to the USB interface structure.
  * @adapter: Pointer to the adapter structure.
  *
  * Return: ret_val: 0 on success, -ENOMEM on failure.
  */
 static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface,
 					      struct rsi_hw *adapter)
 {
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 	struct usb_host_interface *iface_desc;
 	struct usb_endpoint_descriptor *endpoint;
 	__le16 buffer_size;
 	int ii, bep_found = 0;

 	iface_desc = &(interface->altsetting[0]);

 	for (ii = 0; ii < iface_desc->desc.bNumEndpoints; ++ii) {
 		endpoint = &(iface_desc->endpoint[ii].desc);

 		if ((!(dev->bulkin_endpoint_addr)) &&
 		    (endpoint->bEndpointAddress & USB_DIR_IN) &&
 		    ((endpoint->bmAttributes &
 		    USB_ENDPOINT_XFERTYPE_MASK) ==
 		    USB_ENDPOINT_XFER_BULK)) {
 			buffer_size = endpoint->wMaxPacketSize;
 			dev->bulkin_size = buffer_size;
 			dev->bulkin_endpoint_addr =
 				endpoint->bEndpointAddress;
 		}

 		if (!dev->bulkout_endpoint_addr[bep_found] &&
 		    !(endpoint->bEndpointAddress & USB_DIR_IN) &&
 		    ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
 		      USB_ENDPOINT_XFER_BULK)) {
 			dev->bulkout_endpoint_addr[bep_found] =
 				endpoint->bEndpointAddress;
 			buffer_size = endpoint->wMaxPacketSize;
 			dev->bulkout_size[bep_found] = buffer_size;
 			bep_found++;
 		}

 		if (bep_found >= MAX_BULK_EP)
 			break;
 	}

 	if (!(dev->bulkin_endpoint_addr) &&
 	    (dev->bulkout_endpoint_addr[0]))
 		return -EINVAL;

 	return 0;
 }

 /* rsi_usb_reg_read() - This function reads data from given register address.
  * @usbdev: Pointer to the usb_device structure.
  * @reg: Address of the register to be read.
  * @value: Value to be read.
  * @len: length of data to be read.
  *
  * Return: status: 0 on success, a negative error code on failure.
  */
 static int rsi_usb_reg_read(struct usb_device *usbdev,
 			    u32 reg,
 			    u16 *value,
 			    u16 len)
 {
 	u8 *buf;
 	int status = -ENOMEM;

 	buf  = kmalloc(0x04, GFP_KERNEL);
 	if (!buf)
 		return status;

 	status = usb_control_msg(usbdev,
 				 usb_rcvctrlpipe(usbdev, 0),
 				 USB_VENDOR_REGISTER_READ,
 				 USB_TYPE_VENDOR,
 				 ((reg & 0xffff0000) >> 16), (reg & 0xffff),
 				 (void *)buf,
 				 len,
 				 HZ * 5);

 	*value = (buf[0] | (buf[1] << 8));
 	if (status < 0) {
 		rsi_dbg(ERR_ZONE,
 			"%s: Reg read failed with error code :%d\n",
 			__func__, status);
 	}
 	kfree(buf);

 	return status;
 }

 /**
  * rsi_usb_reg_write() - This function writes the given data into the given
  *			 register address.
  * @usbdev: Pointer to the usb_device structure.
  * @reg: Address of the register.
  * @value: Value to write.
  * @len: Length of data to be written.
  *
  * Return: status: 0 on success, a negative error code on failure.
  */
 static int rsi_usb_reg_write(struct usb_device *usbdev,
 			     u32 reg,
 			     u16 value,
 			     u16 len)
 {
 	u8 *usb_reg_buf;
 	int status = -ENOMEM;

 	usb_reg_buf  = kmalloc(0x04, GFP_KERNEL);
 	if (!usb_reg_buf)
 		return status;

 	usb_reg_buf[0] = (value & 0x00ff);
 	usb_reg_buf[1] = (value & 0xff00) >> 8;
 	usb_reg_buf[2] = 0x0;
 	usb_reg_buf[3] = 0x0;

 	status = usb_control_msg(usbdev,
 				 usb_sndctrlpipe(usbdev, 0),
 				 USB_VENDOR_REGISTER_WRITE,
 				 USB_TYPE_VENDOR,
 				 ((reg & 0xffff0000) >> 16),
 				 (reg & 0xffff),
 				 (void *)usb_reg_buf,
 				 len,
 				 HZ * 5);
 	if (status < 0) {
 		rsi_dbg(ERR_ZONE,
 			"%s: Reg write failed with error code :%d\n",
 			__func__, status);
 	}
 	kfree(usb_reg_buf);

 	return status;
 }

 /**
  * rsi_rx_done_handler() - This function is called when a packet is received
  *			   from USB stack. This is callback to recieve done.
  * @urb: Received URB.
  *
  * Return: None.
  */
 static void rsi_rx_done_handler(struct urb *urb)
 {
 	struct rsi_hw *adapter = urb->context;
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;

 	if (urb->status)
 		return;

 	rsi_set_event(&dev->rx_thread.event);
 }

 /**
  * rsi_rx_urb_submit() - This function submits the given URB to the USB stack.
  * @adapter: Pointer to the adapter structure.
  *
  * Return: 0 on success, a negative error code on failure.
  */
 static int rsi_rx_urb_submit(struct rsi_hw *adapter)
 {
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 	struct urb *urb = dev->rx_usb_urb[0];
 	int status;

 	usb_fill_bulk_urb(urb,
 			  dev->usbdev,
 			  usb_rcvbulkpipe(dev->usbdev,
 				dev->bulkin_endpoint_addr),
 			  urb->transfer_buffer,
 			  3000,
 			  rsi_rx_done_handler,
 			  adapter);

 	status = usb_submit_urb(urb, GFP_KERNEL);
 	if (status)
 		rsi_dbg(ERR_ZONE, "%s: Failed in urb submission\n", __func__);

 	return status;
 }

 /**
  * rsi_usb_write_register_multiple() - This function writes multiple bytes of
  *				       information to multiple registers.
  * @adapter: Pointer to the adapter structure.
  * @addr: Address of the register.
  * @data: Pointer to the data that has to be written.
  * @count: Number of multiple bytes to be written on to the registers.
  *
  * Return: status: 0 on success, a negative error code on failure.
  */
 int rsi_usb_write_register_multiple(struct rsi_hw *adapter,
 				    u32 addr,
 				    u8 *data,
 				    u32 count)
 {
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;
 	u8 *buf;
 	u8 transfer;
 	int status = 0;

 	buf = kzalloc(4096, GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;

 	while (count) {
 		transfer = (u8)(min_t(u32, count, 4096));
 		memcpy(buf, data, transfer);
 		status = usb_control_msg(dev->usbdev,
 					 usb_sndctrlpipe(dev->usbdev, 0),
 					 USB_VENDOR_REGISTER_WRITE,
 					 USB_TYPE_VENDOR,
 					 ((addr & 0xffff0000) >> 16),
 					 (addr & 0xffff),
 					 (void *)buf,
 					 transfer,
 					 HZ * 5);
 		if (status < 0) {
 			rsi_dbg(ERR_ZONE,
 				"Reg write failed with error code :%d\n",
 				status);
 		} else {
 			count -= transfer;
 			data += transfer;
 			addr += transfer;
 		}
 	}

 	kfree(buf);
 	return 0;
 }

 /**
  *rsi_usb_host_intf_write_pkt() - This function writes the packet to the
  *				   USB card.
  * @adapter: Pointer to the adapter structure.
  * @pkt: Pointer to the data to be written on to the card.
  * @len: Length of the data to be written on to the card.
  *
  * Return: 0 on success, a negative error code on failure.
  */
 static int rsi_usb_host_intf_write_pkt(struct rsi_hw *adapter,
 				       u8 *pkt,
 				       u32 len)
 {
 	u32 queueno = ((pkt[1] >> 4) & 0xf);
 	u8 endpoint;

 	endpoint = ((queueno == RSI_WIFI_MGMT_Q) ? MGMT_EP : DATA_EP);

 	return rsi_write_multiple(adapter,
 				  endpoint,
 				  (u8 *)pkt,
 				  len);
 }

 /**
  * rsi_deinit_usb_interface() - This function deinitializes the usb interface.
  * @adapter: Pointer to the adapter structure.
  *
  * Return: None.
  */
 static void rsi_deinit_usb_interface(struct rsi_hw *adapter)
 {
 	struct rsi_91x_usbdev *dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;

 	rsi_kill_thread(&dev->rx_thread);
 	usb_free_urb(dev->rx_usb_urb[0]);
 	kfree(adapter->priv->rx_data_pkt);
 	kfree(dev->tx_buffer);
 }

 /**
  * rsi_init_usb_interface() - This function initializes the usb interface.
  * @adapter: Pointer to the adapter structure.
  * @pfunction: Pointer to USB interface structure.
  *
  * Return: 0 on success, a negative error code on failure.
  */
 static int rsi_init_usb_interface(struct rsi_hw *adapter,
 				  struct usb_interface *pfunction)
 {
 	struct rsi_91x_usbdev *rsi_dev;
 	struct rsi_common *common = adapter->priv;
 	int status;

 	rsi_dev = kzalloc(sizeof(*rsi_dev), GFP_KERNEL);
 	if (!rsi_dev)
 		return -ENOMEM;

 	adapter->rsi_dev = rsi_dev;
 	rsi_dev->usbdev = interface_to_usbdev(pfunction);

 	if (rsi_find_bulk_in_and_out_endpoints(pfunction, adapter))
 		return -EINVAL;

 	adapter->device = &pfunction->dev;
 	usb_set_intfdata(pfunction, adapter);

 	common->rx_data_pkt = kmalloc(2048, GFP_KERNEL);
 	if (!common->rx_data_pkt) {
 		rsi_dbg(ERR_ZONE, "%s: Failed to allocate memory\n",
 			__func__);
 		return -ENOMEM;
 	}

 	rsi_dev->tx_buffer = kmalloc(2048, GFP_KERNEL);
 	if (!rsi_dev->tx_buffer) {
 		status = -ENOMEM;
 		goto fail_tx;
 	}
 	rsi_dev->rx_usb_urb[0] = usb_alloc_urb(0, GFP_KERNEL);
 	if (!rsi_dev->rx_usb_urb[0]) {
 		status = -ENOMEM;
 		goto fail_rx;
 	}
 	rsi_dev->rx_usb_urb[0]->transfer_buffer = adapter->priv->rx_data_pkt;
 	rsi_dev->tx_blk_size = 252;

 	/* Initializing function callbacks */
 	adapter->rx_urb_submit = rsi_rx_urb_submit;
 	adapter->host_intf_write_pkt = rsi_usb_host_intf_write_pkt;
 	adapter->check_hw_queue_status = rsi_usb_check_queue_status;
 	adapter->determine_event_timeout = rsi_usb_event_timeout;

 	rsi_init_event(&rsi_dev->rx_thread.event);
 	status = rsi_create_kthread(common, &rsi_dev->rx_thread,
 				    rsi_usb_rx_thread, "RX-Thread");
 	if (status) {
 		rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n", __func__);
 		goto fail_thread;
 	}

 #ifdef CONFIG_RSI_DEBUGFS
 	/* In USB, one less than the MAX_DEBUGFS_ENTRIES entries is required */
 	adapter->num_debugfs_entries = (MAX_DEBUGFS_ENTRIES - 1);
 #endif

 	rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__);
 	return 0;

 fail_thread:
 	usb_free_urb(rsi_dev->rx_usb_urb[0]);
 fail_rx:
 	kfree(rsi_dev->tx_buffer);
 fail_tx:
 	kfree(common->rx_data_pkt);
 	return status;
 }

 /**
  * rsi_probe() - This function is called by kernel when the driver provided
  *		 Vendor and device IDs are matched. All the initialization
  *		 work is done here.
  * @pfunction: Pointer to the USB interface structure.
  * @id: Pointer to the usb_device_id structure.
  *
  * Return: 0 on success, a negative error code on failure.
  */
 static int rsi_probe(struct usb_interface *pfunction,
 		     const struct usb_device_id *id)
 {
 	struct rsi_hw *adapter;
 	struct rsi_91x_usbdev *dev;
 	u16 fw_status;
 	int status;

 	rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);

 	adapter = rsi_91x_init();
 	if (!adapter) {
 		rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n",
 			__func__);
 		return -ENOMEM;
 	}

 	status = rsi_init_usb_interface(adapter, pfunction);
 	if (status) {
 		rsi_dbg(ERR_ZONE, "%s: Failed to init usb interface\n",
 			__func__);
 		goto err;
 	}

 	rsi_dbg(ERR_ZONE, "%s: Initialized os intf ops\n", __func__);

 	dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;

 	status = rsi_usb_reg_read(dev->usbdev, FW_STATUS_REG, &fw_status, 2);
 	if (status)
 		goto err1;
 	else
 		fw_status &= 1;

 	if (!fw_status) {
 		status = rsi_usb_device_init(adapter->priv);
 		if (status) {
 			rsi_dbg(ERR_ZONE, "%s: Failed in device init\n",
 				__func__);
 			goto err1;
 		}

 		status = rsi_usb_reg_write(dev->usbdev,
 					   USB_INTERNAL_REG_1,
 					   RSI_USB_READY_MAGIC_NUM, 1);
 		if (status)
 			goto err1;
 		rsi_dbg(INIT_ZONE, "%s: Performed device init\n", __func__);
 	}

 	status = rsi_rx_urb_submit(adapter);
 	if (status)
 		goto err1;

 	return 0;
 err1:
 	rsi_deinit_usb_interface(adapter);
 err:
 	rsi_91x_deinit(adapter);
 	rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__);
 	return status;
 }

 /**
  * rsi_disconnect() - This function performs the reverse of the probe function,
  *		      it deinitialize the driver structure.
  * @pfunction: Pointer to the USB interface structure.
  *
  * Return: None.
  */
 static void rsi_disconnect(struct usb_interface *pfunction)
 {
 	struct rsi_hw *adapter = usb_get_intfdata(pfunction);

 	if (!adapter)
 		return;

 	rsi_mac80211_detach(adapter);
 	rsi_deinit_usb_interface(adapter);
 	rsi_91x_deinit(adapter);

 	rsi_dbg(INFO_ZONE, "%s: Deinitialization completed\n", __func__);
 }

 #ifdef CONFIG_PM
 static int rsi_suspend(struct usb_interface *intf, pm_message_t message)
 {
 	/* Not yet implemented */
 	return -ENOSYS;
 }

 static int rsi_resume(struct usb_interface *intf)
 {
 	/* Not yet implemented */
 	return -ENOSYS;
 }
 #endif

 static const struct usb_device_id rsi_dev_table[] = {
 	{ USB_DEVICE(0x0303, 0x0100) },
 	{ USB_DEVICE(0x041B, 0x0301) },
 	{ USB_DEVICE(0x041B, 0x0201) },
 	{ USB_DEVICE(0x041B, 0x9330) },
 	{ /* Blank */},
 };

 static struct usb_driver rsi_driver = {
 	.name       = "RSI-USB WLAN",
 	.probe      = rsi_probe,
 	.disconnect = rsi_disconnect,
 	.id_table   = rsi_dev_table,
 #ifdef CONFIG_PM
 	.suspend    = rsi_suspend,
 	.resume     = rsi_resume,
 #endif
 };

 module_usb_driver(rsi_driver);

 MODULE_AUTHOR("Redpine Signals Inc");
 MODULE_DESCRIPTION("Common USB layer for RSI drivers");
 MODULE_SUPPORTED_DEVICE("RSI-91x");
 MODULE_DEVICE_TABLE(usb, rsi_dev_table);
 MODULE_FIRMWARE(FIRMWARE_RSI9113);
 MODULE_VERSION("0.1");
 MODULE_LICENSE("Dual BSD/GPL");
	/**
	* Copyright (c) 2014 Redpine Signals Inc.
	*
	* Permission to use, copy, modify, and/or distribute this software for any
	* purpose with or without fee is hereby granted, provided that the above
	* copyright notice and this permission notice appear in all copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
	* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
	* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
	* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
	* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
	* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
	*
	*/

	#include <linux/module.h>
	#include "rsi_usb.h"

	/**
	* rsi_usb_card_write() - This function writes to the USB Card.
	* @adapter: Pointer to the adapter structure.
	* @buf: Pointer to the buffer from where the data has to be taken.
	* @len: Length to be written.
	* @endpoint: Type of endpoint.
	*
	* Return: status: 0 on success, a negative error code on failure.
	*/
	static int rsi_usb_card_write(struct rsi_hw *adapter,
	void *buf,
	u16 len,
	u8 endpoint)
	{
	struct rsi_91x_usbdev dev = (struct rsi_91x_usbdev )adapter->rsi_dev;
	int status;
	s32 transfer;

	status = usb_bulk_msg(dev->usbdev,
	usb_sndbulkpipe(dev->usbdev,
	dev->bulkout_endpoint_addr[endpoint - 1]),
	buf,
	len,
	&transfer,
	HZ * 5);

	if (status < 0) {
	rsi_dbg(ERR_ZONE,
	"Card write failed with error code :%10d\n", status);
	dev->write_fail = 1;
	}
	return status;
	}

	/**
	* rsi_write_multiple() - This function writes multiple bytes of information
	* to the USB card.
	* @adapter: Pointer to the adapter structure.
	* @addr: Address of the register.
	* @data: Pointer to the data that has to be written.
	* @count: Number of multiple bytes to be written.
	*
	* Return: 0 on success, a negative error code on failure.
	*/
	static int rsi_write_multiple(struct rsi_hw *adapter,
	u8 endpoint,
	u8 *data,
	u32 count)
	{
	struct rsi_91x_usbdev dev = (struct rsi_91x_usbdev )adapter->rsi_dev;
	u8 *seg = dev->tx_buffer;

	if (dev->write_fail)
	return 0;

	if (endpoint == MGMT_EP) {
	memset(seg, 0, RSI_USB_TX_HEAD_ROOM);
	memcpy(seg + RSI_USB_TX_HEAD_ROOM, data, count);
	} else {
	seg = ((u8 *)data - RSI_USB_TX_HEAD_ROOM);
	}

	return rsi_usb_card_write(adapter,
	seg,
	count + RSI_USB_TX_HEAD_ROOM,
	endpoint);
	}

	/**
	* rsi_find_bulk_in_and_out_endpoints() - This function initializes the bulk
	* endpoints to the device.
	* @interface: Pointer to the USB interface structure.
	* @adapter: Pointer to the adapter structure.
	*
	* Return: ret_val: 0 on success, -ENOMEM on failure.
	*/
	static int rsi_find_bulk_in_and_out_endpoints(struct usb_interface *interface,
	struct rsi_hw *adapter)
	{
	struct rsi_91x_usbdev dev = (struct rsi_91x_usbdev )adapter->rsi_dev;
	struct usb_host_interface *iface_desc;
	struct usb_endpoint_descriptor *endpoint;
	__le16 buffer_size;
	int ii, bep_found = 0;

	iface_desc = &(interface->altsetting[0]);

	for (ii = 0; ii < iface_desc->desc.bNumEndpoints; ++ii) {
	endpoint = &(iface_desc->endpoint[ii].desc);

	if ((!(dev->bulkin_endpoint_addr)) &&
	(endpoint->bEndpointAddress & USB_DIR_IN) &&
	((endpoint->bmAttributes &
	USB_ENDPOINT_XFERTYPE_MASK) ==
	USB_ENDPOINT_XFER_BULK)) {
	buffer_size = endpoint->wMaxPacketSize;
	dev->bulkin_size = buffer_size;
	dev->bulkin_endpoint_addr =
	endpoint->bEndpointAddress;
	}

	if (!dev->bulkout_endpoint_addr[bep_found] &&
	!(endpoint->bEndpointAddress & USB_DIR_IN) &&
	((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
	USB_ENDPOINT_XFER_BULK)) {
	dev->bulkout_endpoint_addr[bep_found] =
	endpoint->bEndpointAddress;
	buffer_size = endpoint->wMaxPacketSize;
	dev->bulkout_size[bep_found] = buffer_size;
	bep_found++;
	}

	if (bep_found >= MAX_BULK_EP)
	break;
	}

	if (!(dev->bulkin_endpoint_addr) &&
	(dev->bulkout_endpoint_addr[0]))
	return -EINVAL;

	return 0;
	}

	/* rsi_usb_reg_read() - This function reads data from given register address.
	* @usbdev: Pointer to the usb_device structure.
	* @reg: Address of the register to be read.
	* @value: Value to be read.
	* @len: length of data to be read.
	*
	* Return: status: 0 on success, a negative error code on failure.
	*/
	static int rsi_usb_reg_read(struct usb_device *usbdev,
	u32 reg,
	u16 *value,
	u16 len)
	{
	u8 *buf;
	int status = -ENOMEM;

	buf = kmalloc(0x04, GFP_KERNEL);
	if (!buf)
	return status;

	status = usb_control_msg(usbdev,
	usb_rcvctrlpipe(usbdev, 0),
	USB_VENDOR_REGISTER_READ,
	USB_TYPE_VENDOR,
	((reg & 0xffff0000) >> 16), (reg & 0xffff),
	(void *)buf,
	len,
	HZ * 5);

	*value = (buf[0] \| (buf[1] << 8));
	if (status < 0) {
	rsi_dbg(ERR_ZONE,
	"%s: Reg read failed with error code :%d\n",
	__func__, status);
	}
	kfree(buf);

	return status;
	}

	/**
	* rsi_usb_reg_write() - This function writes the given data into the given
	* register address.
	* @usbdev: Pointer to the usb_device structure.
	* @reg: Address of the register.
	* @value: Value to write.
	* @len: Length of data to be written.
	*
	* Return: status: 0 on success, a negative error code on failure.
	*/
	static int rsi_usb_reg_write(struct usb_device *usbdev,
	u32 reg,
	u16 value,
	u16 len)
	{
	u8 *usb_reg_buf;
	int status = -ENOMEM;

	usb_reg_buf = kmalloc(0x04, GFP_KERNEL);
	if (!usb_reg_buf)
	return status;

	usb_reg_buf[0] = (value & 0x00ff);
	usb_reg_buf[1] = (value & 0xff00) >> 8;
	usb_reg_buf[2] = 0x0;
	usb_reg_buf[3] = 0x0;

	status = usb_control_msg(usbdev,
	usb_sndctrlpipe(usbdev, 0),
	USB_VENDOR_REGISTER_WRITE,
	USB_TYPE_VENDOR,
	((reg & 0xffff0000) >> 16),
	(reg & 0xffff),
	(void *)usb_reg_buf,
	len,
	HZ * 5);
	if (status < 0) {
	rsi_dbg(ERR_ZONE,
	"%s: Reg write failed with error code :%d\n",
	__func__, status);
	}
	kfree(usb_reg_buf);

	return status;
	}

	/**
	* rsi_rx_done_handler() - This function is called when a packet is received
	* from USB stack. This is callback to recieve done.
	* @urb: Received URB.
	*
	* Return: None.
	*/
	static void rsi_rx_done_handler(struct urb *urb)
	{
	struct rsi_hw *adapter = urb->context;
	struct rsi_91x_usbdev dev = (struct rsi_91x_usbdev )adapter->rsi_dev;

	if (urb->status)
	return;

	rsi_set_event(&dev->rx_thread.event);
	}

	/**
	* rsi_rx_urb_submit() - This function submits the given URB to the USB stack.
	* @adapter: Pointer to the adapter structure.
	*
	* Return: 0 on success, a negative error code on failure.
	*/
	static int rsi_rx_urb_submit(struct rsi_hw *adapter)
	{
	struct rsi_91x_usbdev dev = (struct rsi_91x_usbdev )adapter->rsi_dev;
	struct urb *urb = dev->rx_usb_urb[0];
	int status;

	usb_fill_bulk_urb(urb,
	dev->usbdev,
	usb_rcvbulkpipe(dev->usbdev,
	dev->bulkin_endpoint_addr),
	urb->transfer_buffer,
	3000,
	rsi_rx_done_handler,
	adapter);

	status = usb_submit_urb(urb, GFP_KERNEL);
	if (status)
	rsi_dbg(ERR_ZONE, "%s: Failed in urb submission\n", __func__);

	return status;
	}

	/**
	* rsi_usb_write_register_multiple() - This function writes multiple bytes of
	* information to multiple registers.
	* @adapter: Pointer to the adapter structure.
	* @addr: Address of the register.
	* @data: Pointer to the data that has to be written.
	* @count: Number of multiple bytes to be written on to the registers.
	*
	* Return: status: 0 on success, a negative error code on failure.
	*/
	int rsi_usb_write_register_multiple(struct rsi_hw *adapter,
	u32 addr,
	u8 *data,
	u32 count)
	{
	struct rsi_91x_usbdev dev = (struct rsi_91x_usbdev )adapter->rsi_dev;
	u8 *buf;
	u8 transfer;
	int status = 0;

	buf = kzalloc(4096, GFP_KERNEL);
	if (!buf)
	return -ENOMEM;

	while (count) {
	transfer = (u8)(min_t(u32, count, 4096));
	memcpy(buf, data, transfer);
	status = usb_control_msg(dev->usbdev,
	usb_sndctrlpipe(dev->usbdev, 0),
	USB_VENDOR_REGISTER_WRITE,
	USB_TYPE_VENDOR,
	((addr & 0xffff0000) >> 16),
	(addr & 0xffff),
	(void *)buf,
	transfer,
	HZ * 5);
	if (status < 0) {
	rsi_dbg(ERR_ZONE,
	"Reg write failed with error code :%d\n",
	status);
	} else {
	count -= transfer;
	data += transfer;
	addr += transfer;
	}
	}

	kfree(buf);
	return 0;
	}

	/**
	*rsi_usb_host_intf_write_pkt() - This function writes the packet to the
	* USB card.
	* @adapter: Pointer to the adapter structure.
	* @pkt: Pointer to the data to be written on to the card.
	* @len: Length of the data to be written on to the card.
	*
	* Return: 0 on success, a negative error code on failure.
	*/
	static int rsi_usb_host_intf_write_pkt(struct rsi_hw *adapter,
	u8 *pkt,
	u32 len)
	{
	u32 queueno = ((pkt[1] >> 4) & 0xf);
	u8 endpoint;

	endpoint = ((queueno == RSI_WIFI_MGMT_Q) ? MGMT_EP : DATA_EP);

	return rsi_write_multiple(adapter,
	endpoint,
	(u8 *)pkt,
	len);
	}

	/**
	* rsi_deinit_usb_interface() - This function deinitializes the usb interface.
	* @adapter: Pointer to the adapter structure.
	*
	* Return: None.
	*/
	static void rsi_deinit_usb_interface(struct rsi_hw *adapter)
	{
	struct rsi_91x_usbdev dev = (struct rsi_91x_usbdev )adapter->rsi_dev;

	rsi_kill_thread(&dev->rx_thread);
	usb_free_urb(dev->rx_usb_urb[0]);
	kfree(adapter->priv->rx_data_pkt);
	kfree(dev->tx_buffer);
	}

	/**
	* rsi_init_usb_interface() - This function initializes the usb interface.
	* @adapter: Pointer to the adapter structure.
	* @pfunction: Pointer to USB interface structure.
	*
	* Return: 0 on success, a negative error code on failure.
	*/
	static int rsi_init_usb_interface(struct rsi_hw *adapter,
	struct usb_interface *pfunction)
	{
	struct rsi_91x_usbdev *rsi_dev;
	struct rsi_common *common = adapter->priv;
	int status;

	rsi_dev = kzalloc(sizeof(*rsi_dev), GFP_KERNEL);
	if (!rsi_dev)
	return -ENOMEM;

	adapter->rsi_dev = rsi_dev;
	rsi_dev->usbdev = interface_to_usbdev(pfunction);

	if (rsi_find_bulk_in_and_out_endpoints(pfunction, adapter))
	return -EINVAL;

	adapter->device = &pfunction->dev;
	usb_set_intfdata(pfunction, adapter);

	common->rx_data_pkt = kmalloc(2048, GFP_KERNEL);
	if (!common->rx_data_pkt) {
	rsi_dbg(ERR_ZONE, "%s: Failed to allocate memory\n",
	__func__);
	return -ENOMEM;
	}

	rsi_dev->tx_buffer = kmalloc(2048, GFP_KERNEL);
	if (!rsi_dev->tx_buffer) {
	status = -ENOMEM;
	goto fail_tx;
	}
	rsi_dev->rx_usb_urb[0] = usb_alloc_urb(0, GFP_KERNEL);
	if (!rsi_dev->rx_usb_urb[0]) {
	status = -ENOMEM;
	goto fail_rx;
	}
	rsi_dev->rx_usb_urb[0]->transfer_buffer = adapter->priv->rx_data_pkt;
	rsi_dev->tx_blk_size = 252;

	/* Initializing function callbacks */
	adapter->rx_urb_submit = rsi_rx_urb_submit;
	adapter->host_intf_write_pkt = rsi_usb_host_intf_write_pkt;
	adapter->check_hw_queue_status = rsi_usb_check_queue_status;
	adapter->determine_event_timeout = rsi_usb_event_timeout;

	rsi_init_event(&rsi_dev->rx_thread.event);
	status = rsi_create_kthread(common, &rsi_dev->rx_thread,
	rsi_usb_rx_thread, "RX-Thread");
	if (status) {
	rsi_dbg(ERR_ZONE, "%s: Unable to init rx thrd\n", __func__);
	goto fail_thread;
	}

	#ifdef CONFIG_RSI_DEBUGFS
	/* In USB, one less than the MAX_DEBUGFS_ENTRIES entries is required */
	adapter->num_debugfs_entries = (MAX_DEBUGFS_ENTRIES - 1);
	#endif

	rsi_dbg(INIT_ZONE, "%s: Enabled the interface\n", __func__);
	return 0;

	fail_thread:
	usb_free_urb(rsi_dev->rx_usb_urb[0]);
	fail_rx:
	kfree(rsi_dev->tx_buffer);
	fail_tx:
	kfree(common->rx_data_pkt);
	return status;
	}

	/**
	* rsi_probe() - This function is called by kernel when the driver provided
	* Vendor and device IDs are matched. All the initialization
	* work is done here.
	* @pfunction: Pointer to the USB interface structure.
	* @id: Pointer to the usb_device_id structure.
	*
	* Return: 0 on success, a negative error code on failure.
	*/
	static int rsi_probe(struct usb_interface *pfunction,
	const struct usb_device_id *id)
	{
	struct rsi_hw *adapter;
	struct rsi_91x_usbdev *dev;
	u16 fw_status;
	int status;

	rsi_dbg(INIT_ZONE, "%s: Init function called\n", __func__);

	adapter = rsi_91x_init();
	if (!adapter) {
	rsi_dbg(ERR_ZONE, "%s: Failed to init os intf ops\n",
	__func__);
	return -ENOMEM;
	}

	status = rsi_init_usb_interface(adapter, pfunction);
	if (status) {
	rsi_dbg(ERR_ZONE, "%s: Failed to init usb interface\n",
	__func__);
	goto err;
	}

	rsi_dbg(ERR_ZONE, "%s: Initialized os intf ops\n", __func__);

	dev = (struct rsi_91x_usbdev *)adapter->rsi_dev;

	status = rsi_usb_reg_read(dev->usbdev, FW_STATUS_REG, &fw_status, 2);
	if (status)
	goto err1;
	else
	fw_status &= 1;

	if (!fw_status) {
	status = rsi_usb_device_init(adapter->priv);
	if (status) {
	rsi_dbg(ERR_ZONE, "%s: Failed in device init\n",
	__func__);
	goto err1;
	}

	status = rsi_usb_reg_write(dev->usbdev,
	USB_INTERNAL_REG_1,
	RSI_USB_READY_MAGIC_NUM, 1);
	if (status)
	goto err1;
	rsi_dbg(INIT_ZONE, "%s: Performed device init\n", __func__);
	}

	status = rsi_rx_urb_submit(adapter);
	if (status)
	goto err1;

	return 0;
	err1:
	rsi_deinit_usb_interface(adapter);
	err:
	rsi_91x_deinit(adapter);
	rsi_dbg(ERR_ZONE, "%s: Failed in probe...Exiting\n", __func__);
	return status;
	}

	/**
	* rsi_disconnect() - This function performs the reverse of the probe function,
	* it deinitialize the driver structure.
	* @pfunction: Pointer to the USB interface structure.
	*
	* Return: None.
	*/
	static void rsi_disconnect(struct usb_interface *pfunction)
	{
	struct rsi_hw *adapter = usb_get_intfdata(pfunction);

	if (!adapter)
	return;

	rsi_mac80211_detach(adapter);
	rsi_deinit_usb_interface(adapter);
	rsi_91x_deinit(adapter);

	rsi_dbg(INFO_ZONE, "%s: Deinitialization completed\n", __func__);
	}

	#ifdef CONFIG_PM
	static int rsi_suspend(struct usb_interface *intf, pm_message_t message)
	{
	/* Not yet implemented */
	return -ENOSYS;
	}

	static int rsi_resume(struct usb_interface *intf)
	{
	/* Not yet implemented */
	return -ENOSYS;
	}
	#endif

	static const struct usb_device_id rsi_dev_table[] = {
	{ USB_DEVICE(0x0303, 0x0100) },
	{ USB_DEVICE(0x041B, 0x0301) },
	{ USB_DEVICE(0x041B, 0x0201) },
	{ USB_DEVICE(0x041B, 0x9330) },
	{ /* Blank */},
	};

	static struct usb_driver rsi_driver = {
	.name = "RSI-USB WLAN",
	.probe = rsi_probe,
	.disconnect = rsi_disconnect,
	.id_table = rsi_dev_table,
	#ifdef CONFIG_PM
	.suspend = rsi_suspend,
	.resume = rsi_resume,
	#endif
	};

	module_usb_driver(rsi_driver);

	MODULE_AUTHOR("Redpine Signals Inc");
	MODULE_DESCRIPTION("Common USB layer for RSI drivers");
	MODULE_SUPPORTED_DEVICE("RSI-91x");
	MODULE_DEVICE_TABLE(usb, rsi_dev_table);
	MODULE_FIRMWARE(FIRMWARE_RSI9113);
	MODULE_VERSION("0.1");
	MODULE_LICENSE("Dual BSD/GPL");