| /* |
| * Kontron PLD GPIO driver |
| * |
| * Copyright (c) 2010-2013 Kontron Europe GmbH |
| * Author: Michael Brunner <michael.brunner@kontron.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License 2 as published |
| * by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/bitops.h> |
| #include <linux/errno.h> |
| #include <linux/platform_device.h> |
| #include <linux/gpio.h> |
| #include <linux/mfd/kempld.h> |
| |
| #define KEMPLD_GPIO_MAX_NUM 16 |
| #define KEMPLD_GPIO_MASK(x) (BIT((x) % 8)) |
| #define KEMPLD_GPIO_DIR_NUM(x) (0x40 + (x) / 8) |
| #define KEMPLD_GPIO_LVL_NUM(x) (0x42 + (x) / 8) |
| #define KEMPLD_GPIO_EVT_LVL_EDGE 0x46 |
| #define KEMPLD_GPIO_IEN 0x4A |
| |
| struct kempld_gpio_data { |
| struct gpio_chip chip; |
| struct kempld_device_data *pld; |
| }; |
| |
| /* |
| * Set or clear GPIO bit |
| * kempld_get_mutex must be called prior to calling this function. |
| */ |
| static void kempld_gpio_bitop(struct kempld_device_data *pld, |
| u8 reg, u8 bit, u8 val) |
| { |
| u8 status; |
| |
| status = kempld_read8(pld, reg); |
| if (val) |
| status |= KEMPLD_GPIO_MASK(bit); |
| else |
| status &= ~KEMPLD_GPIO_MASK(bit); |
| kempld_write8(pld, reg, status); |
| } |
| |
| static int kempld_gpio_get_bit(struct kempld_device_data *pld, u8 reg, u8 bit) |
| { |
| u8 status; |
| |
| kempld_get_mutex(pld); |
| status = kempld_read8(pld, reg); |
| kempld_release_mutex(pld); |
| |
| return !!(status & KEMPLD_GPIO_MASK(bit)); |
| } |
| |
| static int kempld_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| struct kempld_gpio_data *gpio |
| = container_of(chip, struct kempld_gpio_data, chip); |
| struct kempld_device_data *pld = gpio->pld; |
| |
| return kempld_gpio_get_bit(pld, KEMPLD_GPIO_LVL_NUM(offset), offset); |
| } |
| |
| static void kempld_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct kempld_gpio_data *gpio |
| = container_of(chip, struct kempld_gpio_data, chip); |
| struct kempld_device_data *pld = gpio->pld; |
| |
| kempld_get_mutex(pld); |
| kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset), offset, value); |
| kempld_release_mutex(pld); |
| } |
| |
| static int kempld_gpio_direction_input(struct gpio_chip *chip, unsigned offset) |
| { |
| struct kempld_gpio_data *gpio |
| = container_of(chip, struct kempld_gpio_data, chip); |
| struct kempld_device_data *pld = gpio->pld; |
| |
| kempld_get_mutex(pld); |
| kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset), offset, 0); |
| kempld_release_mutex(pld); |
| |
| return 0; |
| } |
| |
| static int kempld_gpio_direction_output(struct gpio_chip *chip, unsigned offset, |
| int value) |
| { |
| struct kempld_gpio_data *gpio |
| = container_of(chip, struct kempld_gpio_data, chip); |
| struct kempld_device_data *pld = gpio->pld; |
| |
| kempld_get_mutex(pld); |
| kempld_gpio_bitop(pld, KEMPLD_GPIO_LVL_NUM(offset), offset, value); |
| kempld_gpio_bitop(pld, KEMPLD_GPIO_DIR_NUM(offset), offset, 1); |
| kempld_release_mutex(pld); |
| |
| return 0; |
| } |
| |
| static int kempld_gpio_get_direction(struct gpio_chip *chip, unsigned offset) |
| { |
| struct kempld_gpio_data *gpio |
| = container_of(chip, struct kempld_gpio_data, chip); |
| struct kempld_device_data *pld = gpio->pld; |
| |
| return !kempld_gpio_get_bit(pld, KEMPLD_GPIO_DIR_NUM(offset), offset); |
| } |
| |
| static int kempld_gpio_pincount(struct kempld_device_data *pld) |
| { |
| u16 evt, evt_back; |
| |
| kempld_get_mutex(pld); |
| |
| /* Backup event register as it might be already initialized */ |
| evt_back = kempld_read16(pld, KEMPLD_GPIO_EVT_LVL_EDGE); |
| /* Clear event register */ |
| kempld_write16(pld, KEMPLD_GPIO_EVT_LVL_EDGE, 0x0000); |
| /* Read back event register */ |
| evt = kempld_read16(pld, KEMPLD_GPIO_EVT_LVL_EDGE); |
| /* Restore event register */ |
| kempld_write16(pld, KEMPLD_GPIO_EVT_LVL_EDGE, evt_back); |
| |
| kempld_release_mutex(pld); |
| |
| return evt ? __ffs(evt) : 16; |
| } |
| |
| static int kempld_gpio_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct kempld_device_data *pld = dev_get_drvdata(dev->parent); |
| struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); |
| struct kempld_gpio_data *gpio; |
| struct gpio_chip *chip; |
| int ret; |
| |
| if (pld->info.spec_major < 2) { |
| dev_err(dev, |
| "Driver only supports GPIO devices compatible to PLD spec. rev. 2.0 or higher\n"); |
| return -ENODEV; |
| } |
| |
| gpio = devm_kzalloc(dev, sizeof(*gpio), GFP_KERNEL); |
| if (!gpio) |
| return -ENOMEM; |
| |
| gpio->pld = pld; |
| |
| platform_set_drvdata(pdev, gpio); |
| |
| chip = &gpio->chip; |
| chip->label = "gpio-kempld"; |
| chip->owner = THIS_MODULE; |
| chip->dev = dev; |
| chip->can_sleep = true; |
| if (pdata && pdata->gpio_base) |
| chip->base = pdata->gpio_base; |
| else |
| chip->base = -1; |
| chip->direction_input = kempld_gpio_direction_input; |
| chip->direction_output = kempld_gpio_direction_output; |
| chip->get_direction = kempld_gpio_get_direction; |
| chip->get = kempld_gpio_get; |
| chip->set = kempld_gpio_set; |
| chip->ngpio = kempld_gpio_pincount(pld); |
| if (chip->ngpio == 0) { |
| dev_err(dev, "No GPIO pins detected\n"); |
| return -ENODEV; |
| } |
| |
| ret = gpiochip_add(chip); |
| if (ret) { |
| dev_err(dev, "Could not register GPIO chip\n"); |
| return ret; |
| } |
| |
| dev_info(dev, "GPIO functionality initialized with %d pins\n", |
| chip->ngpio); |
| |
| return 0; |
| } |
| |
| static int kempld_gpio_remove(struct platform_device *pdev) |
| { |
| struct kempld_gpio_data *gpio = platform_get_drvdata(pdev); |
| |
| gpiochip_remove(&gpio->chip); |
| return 0; |
| } |
| |
| static struct platform_driver kempld_gpio_driver = { |
| .driver = { |
| .name = "kempld-gpio", |
| }, |
| .probe = kempld_gpio_probe, |
| .remove = kempld_gpio_remove, |
| }; |
| |
| module_platform_driver(kempld_gpio_driver); |
| |
| MODULE_DESCRIPTION("KEM PLD GPIO Driver"); |
| MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:kempld-gpio"); |