blob: e6f75c633623cf45b9efc67844149551eb343e83 [file] [log] [blame]
/*
* BSD LICENSE
*
* Copyright(c) 2015-2017 Broadcom. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Broadcom nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
/ {
compatible = "brcm,stingray";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu@000 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x0>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
};
cpu@001 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x1>;
enable-method = "psci";
next-level-cache = <&CLUSTER0_L2>;
};
cpu@100 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x100>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
};
cpu@101 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x101>;
enable-method = "psci";
next-level-cache = <&CLUSTER1_L2>;
};
cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x200>;
enable-method = "psci";
next-level-cache = <&CLUSTER2_L2>;
};
cpu@201 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x201>;
enable-method = "psci";
next-level-cache = <&CLUSTER2_L2>;
};
cpu@300 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x300>;
enable-method = "psci";
next-level-cache = <&CLUSTER3_L2>;
};
cpu@301 {
device_type = "cpu";
compatible = "arm,cortex-a72", "arm,armv8";
reg = <0x0 0x301>;
enable-method = "psci";
next-level-cache = <&CLUSTER3_L2>;
};
CLUSTER0_L2: l2-cache@000 {
compatible = "cache";
};
CLUSTER1_L2: l2-cache@100 {
compatible = "cache";
};
CLUSTER2_L2: l2-cache@200 {
compatible = "cache";
};
CLUSTER3_L2: l2-cache@300 {
compatible = "cache";
};
};
memory: memory@80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0 0x40000000>;
};
psci {
compatible = "arm,psci-0.2";
method = "smc";
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
};
scr {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x61000000 0x05000000>;
ccn: ccn@00000000 {
compatible = "arm,ccn-502";
reg = <0x00000000 0x900000>;
interrupts = <GIC_SPI 799 IRQ_TYPE_LEVEL_HIGH>;
};
gic: interrupt-controller@02c00000 {
compatible = "arm,gic-v3";
#interrupt-cells = <3>;
#address-cells = <1>;
#size-cells = <1>;
ranges;
interrupt-controller;
reg = <0x02c00000 0x010000>, /* GICD */
<0x02e00000 0x600000>; /* GICR */
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
gic_its: gic-its@63c20000 {
compatible = "arm,gic-v3-its";
msi-controller;
#msi-cells = <1>;
reg = <0x02c20000 0x10000>;
};
};
smmu: mmu@03000000 {
compatible = "arm,mmu-500";
reg = <0x03000000 0x80000>;
#global-interrupts = <1>;
interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 712 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 714 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 717 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 718 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 719 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 720 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 721 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 722 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 723 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 724 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 725 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 726 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 727 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 728 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 729 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 730 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 731 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 732 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 733 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 734 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 735 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 736 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 737 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 738 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 739 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 740 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 741 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 742 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 743 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 748 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 749 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 750 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 751 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 752 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 753 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 754 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 755 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 756 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 757 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 758 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 759 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 760 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 761 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 762 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 763 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 764 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 765 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 766 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 767 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 768 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 769 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 770 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>;
#iommu-cells = <2>;
};
};
crmu: crmu {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x66400000 0x100000>;
#include "stingray-clock.dtsi"
gpio_crmu: gpio@00024800 {
compatible = "brcm,iproc-gpio";
reg = <0x00024800 0x4c>;
ngpios = <6>;
#gpio-cells = <2>;
gpio-controller;
};
};
#include "stingray-fs4.dtsi"
#include "stingray-sata.dtsi"
hsls {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x68900000 0x17700000>;
#include "stingray-pinctrl.dtsi"
mdio_mux_iproc: mdio-mux@0002023c {
compatible = "brcm,mdio-mux-iproc";
reg = <0x0002023c 0x14>;
#address-cells = <1>;
#size-cells = <0>;
mdio@0 { /* PCIe serdes */
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@2 { /* SATA */
reg = <0x2>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@3 { /* USB */
reg = <0x3>;
#address-cells = <1>;
#size-cells = <0>;
};
mdio@10 { /* RGMII */
reg = <0x10>;
#address-cells = <1>;
#size-cells = <0>;
};
};
pwm: pwm@00010000 {
compatible = "brcm,iproc-pwm";
reg = <0x00010000 0x1000>;
clocks = <&crmu_ref25m>;
#pwm-cells = <3>;
status = "disabled";
};
timer0: timer@00030000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00030000 0x1000>;
interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
timer1: timer@00040000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00040000 0x1000>;
interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
};
timer2: timer@00050000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00050000 0x1000>;
interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
timer3: timer@00060000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00060000 0x1000>;
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
timer4: timer@00070000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00070000 0x1000>;
interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
timer5: timer@00080000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00080000 0x1000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
timer6: timer@00090000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x00090000 0x1000>;
interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
timer7: timer@000a0000 {
compatible = "arm,sp804", "arm,primecell";
reg = <0x000a0000 0x1000>;
interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>,
<&hsls_25m_div2_clk>,
<&hsls_div4_clk>;
clock-names = "timer1", "timer2", "apb_pclk";
status = "disabled";
};
i2c0: i2c@000b0000 {
compatible = "brcm,iproc-i2c";
reg = <0x000b0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 177 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
status = "disabled";
};
wdt0: watchdog@000c0000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x000c0000 0x1000>;
interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_25m_div2_clk>, <&hsls_div4_clk>;
clock-names = "wdogclk", "apb_pclk";
};
gpio_hsls: gpio@000d0000 {
compatible = "brcm,iproc-gpio";
reg = <0x000d0000 0x864>;
ngpios = <151>;
#gpio-cells = <2>;
gpio-controller;
interrupt-controller;
interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
gpio-ranges = <&pinmux 0 0 16>,
<&pinmux 16 71 2>,
<&pinmux 18 131 8>,
<&pinmux 26 83 6>,
<&pinmux 32 123 4>,
<&pinmux 36 43 24>,
<&pinmux 60 89 2>,
<&pinmux 62 73 4>,
<&pinmux 66 95 28>,
<&pinmux 94 127 4>,
<&pinmux 98 139 10>,
<&pinmux 108 16 27>,
<&pinmux 135 77 6>,
<&pinmux 141 67 4>,
<&pinmux 145 149 6>,
<&pinmux 151 91 4>;
};
i2c1: i2c@000e0000 {
compatible = "brcm,iproc-i2c";
reg = <0x000e0000 0x100>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <GIC_SPI 178 IRQ_TYPE_NONE>;
clock-frequency = <100000>;
status = "disabled";
};
uart0: uart@00100000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00100000 0x1000>;
reg-shift = <2>;
clock-frequency = <25000000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart1: uart@00110000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00110000 0x1000>;
reg-shift = <2>;
clock-frequency = <25000000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart2: uart@00120000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00120000 0x1000>;
reg-shift = <2>;
clock-frequency = <25000000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
uart3: uart@00130000 {
device_type = "serial";
compatible = "snps,dw-apb-uart";
reg = <0x00130000 0x1000>;
reg-shift = <2>;
clock-frequency = <25000000>;
interrupt-parent = <&gic>;
interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
ssp0: ssp@00180000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00180000 0x1000>;
interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
clock-names = "spiclk", "apb_pclk";
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
ssp1: ssp@00190000 {
compatible = "arm,pl022", "arm,primecell";
reg = <0x00190000 0x1000>;
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&hsls_div2_clk>, <&hsls_div2_clk>;
clock-names = "spiclk", "apb_pclk";
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
hwrng: hwrng@00220000 {
compatible = "brcm,iproc-rng200";
reg = <0x00220000 0x28>;
};
dma0: dma@00310000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x00310000 0x1000>;
interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <32>;
clocks = <&hsls_div2_clk>;
clock-names = "apb_pclk";
iommus = <&smmu 0x6000 0x0000>;
};
enet: ethernet@00340000{
compatible = "brcm,amac";
reg = <0x00340000 0x1000>;
reg-names = "amac_base";
dma-coherent;
interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>;
status= "disabled";
};
nand: nand@00360000 {
compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1";
reg = <0x00360000 0x600>,
<0x0050a408 0x600>,
<0x00360f00 0x20>;
reg-names = "nand", "iproc-idm", "iproc-ext";
interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
brcm,nand-has-wp;
status = "disabled";
};
sdio0: sdhci@003f1000 {
compatible = "brcm,sdhci-iproc";
reg = <0x003f1000 0x100>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
bus-width = <8>;
clocks = <&sdio0_clk>;
iommus = <&smmu 0x6002 0x0000>;
status = "disabled";
};
sdio1: sdhci@003f2000 {
compatible = "brcm,sdhci-iproc";
reg = <0x003f2000 0x100>;
interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
bus-width = <8>;
clocks = <&sdio1_clk>;
iommus = <&smmu 0x6003 0x0000>;
status = "disabled";
};
};
};