blob: f9853156e311fb1180a373cb8ed93a293ff59c9b [file] [log] [blame]
Allwinner sun9i USB PHY
-----------------------
Required properties:
- compatible : should be one of
* allwinner,sun9i-a80-usb-phy
- reg : a list of offset + length pairs
- #phy-cells : from the generic phy bindings, must be 0
- phy_type : "hsic" for HSIC usage;
other values or absence of this property indicates normal USB
- clocks : phandle + clock specifier for the phy clocks
- clock-names : depending on the "phy_type" property,
* "phy" for normal USB
* "hsic_480M", "hsic_12M" for HSIC
- resets : a list of phandle + reset specifier pairs
- reset-names : depending on the "phy_type" property,
* "phy" for normal USB
* "hsic" for HSIC
Optional Properties:
- phy-supply : from the generic phy bindings, a phandle to a regulator that
provides power to VBUS.
It is recommended to list all clocks and resets available.
The driver will only use those matching the phy_type.
Example:
usbphy1: phy@00a01800 {
compatible = "allwinner,sun9i-a80-usb-phy";
reg = <0x00a01800 0x4>;
clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>,
<&usb_phy_clk 3>;
clock-names = "hsic_480M", "hsic_12M", "phy";
resets = <&usb_phy_clk 18>, <&usb_phy_clk 19>;
reset-names = "hsic", "phy";
#phy-cells = <0>;
};