blob: ab1811354cce2ef8b1436d40cf7362423e9b2c7f [file] [log] [blame]
Allwinner A31/H3 SPI controller
Required properties:
- compatible: Should be "allwinner,sun6i-a31-spi" or "allwinner,sun8i-h3-spi".
- reg: Should contain register location and length.
- interrupts: Should contain interrupt.
- clocks: phandle to the clocks feeding the SPI controller. Two are
needed:
- "ahb": the gated AHB parent clock
- "mod": the parent module clock
- clock-names: Must contain the clock names described just above
- resets: phandle to the reset controller asserting this device in
reset
Optional properties:
- dmas: DMA specifiers for rx and tx dma. See the DMA client binding,
Documentation/devicetree/bindings/dma/dma.txt
- dma-names: DMA request names should include "rx" and "tx" if present.
Example:
spi1: spi@01c69000 {
compatible = "allwinner,sun6i-a31-spi";
reg = <0x01c69000 0x1000>;
interrupts = <0 66 4>;
clocks = <&ahb1_gates 21>, <&spi1_clk>;
clock-names = "ahb", "mod";
resets = <&ahb1_rst 21>;
};
spi0: spi@01c68000 {
compatible = "allwinner,sun8i-h3-spi";
reg = <0x01c68000 0x1000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>;
clock-names = "ahb", "mod";
dmas = <&dma 23>, <&dma 23>;
dma-names = "rx", "tx";
pinctrl-names = "default";
pinctrl-0 = <&spi0_pins>;
resets = <&ccu RST_BUS_SPI0>;
#address-cells = <1>;
#size-cells = <0>;
};