| i.mx6 Poweroff Driver |
| |
| SNVS_LPCR in SNVS module can power off the whole system by pull |
| PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC. |
| If you don't want to use PMIC_ON_REQ as power on/off control, |
| please set status='disabled' to disable this driver. |
| |
| Required Properties: |
| -compatible: "fsl,sec-v4.0-poweroff" |
| -reg: Specifies the physical address of the SNVS_LPCR register |
| |
| Example: |
| snvs@020cc000 { |
| compatible = "fsl,sec-v4.0-mon", "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0x020cc000 0x4000>; |
| ..... |
| snvs_poweroff: snvs-poweroff@38 { |
| compatible = "fsl,sec-v4.0-poweroff"; |
| reg = <0x38 0x4>; |
| }; |
| } |
