| /* |
| * SAMSUNG EXYNOS7 SoC device tree source |
| * |
| * Copyright (c) 2014 Samsung Electronics Co., Ltd. |
| * http://www.samsung.com |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <dt-bindings/clock/exynos7-clk.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| compatible = "samsung,exynos7"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| pinctrl0 = &pinctrl_alive; |
| pinctrl1 = &pinctrl_bus0; |
| pinctrl2 = &pinctrl_nfc; |
| pinctrl3 = &pinctrl_touch; |
| pinctrl4 = &pinctrl_ff; |
| pinctrl5 = &pinctrl_ese; |
| pinctrl6 = &pinctrl_fsys0; |
| pinctrl7 = &pinctrl_fsys1; |
| pinctrl8 = &pinctrl_bus1; |
| tmuctrl0 = &tmuctrl_0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu_atlas0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57", "arm,armv8"; |
| reg = <0x0>; |
| enable-method = "psci"; |
| }; |
| |
| cpu_atlas1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57", "arm,armv8"; |
| reg = <0x1>; |
| enable-method = "psci"; |
| }; |
| |
| cpu_atlas2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57", "arm,armv8"; |
| reg = <0x2>; |
| enable-method = "psci"; |
| }; |
| |
| cpu_atlas3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a57", "arm,armv8"; |
| reg = <0x3>; |
| enable-method = "psci"; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| soc: soc { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges = <0 0 0 0x18000000>; |
| |
| chipid@10000000 { |
| compatible = "samsung,exynos4210-chipid"; |
| reg = <0x10000000 0x100>; |
| }; |
| |
| fin_pll: xxti { |
| compatible = "fixed-clock"; |
| clock-output-names = "fin_pll"; |
| #clock-cells = <0>; |
| }; |
| |
| gic: interrupt-controller@11001000 { |
| compatible = "arm,gic-400"; |
| #interrupt-cells = <3>; |
| #address-cells = <0>; |
| interrupt-controller; |
| reg = <0x11001000 0x1000>, |
| <0x11002000 0x1000>, |
| <0x11004000 0x2000>, |
| <0x11006000 0x2000>; |
| }; |
| |
| amba { |
| compatible = "simple-bus"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| pdma0: pdma@10E10000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x10E10000 0x1000>; |
| interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_fsys0 ACLK_PDMA0>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| |
| pdma1: pdma@10EB0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x10EB0000 0x1000>; |
| interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_fsys0 ACLK_PDMA1>; |
| clock-names = "apb_pclk"; |
| #dma-cells = <1>; |
| #dma-channels = <8>; |
| #dma-requests = <32>; |
| }; |
| }; |
| |
| clock_topc: clock-controller@10570000 { |
| compatible = "samsung,exynos7-clock-topc"; |
| reg = <0x10570000 0x10000>; |
| #clock-cells = <1>; |
| }; |
| |
| clock_top0: clock-controller@105d0000 { |
| compatible = "samsung,exynos7-clock-top0"; |
| reg = <0x105d0000 0xb000>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>, |
| <&clock_topc DOUT_SCLK_BUS1_PLL>, |
| <&clock_topc DOUT_SCLK_CC_PLL>, |
| <&clock_topc DOUT_SCLK_MFC_PLL>; |
| clock-names = "fin_pll", "dout_sclk_bus0_pll", |
| "dout_sclk_bus1_pll", "dout_sclk_cc_pll", |
| "dout_sclk_mfc_pll"; |
| }; |
| |
| clock_top1: clock-controller@105e0000 { |
| compatible = "samsung,exynos7-clock-top1"; |
| reg = <0x105e0000 0xb000>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_topc DOUT_SCLK_BUS0_PLL>, |
| <&clock_topc DOUT_SCLK_BUS1_PLL>, |
| <&clock_topc DOUT_SCLK_CC_PLL>, |
| <&clock_topc DOUT_SCLK_MFC_PLL>; |
| clock-names = "fin_pll", "dout_sclk_bus0_pll", |
| "dout_sclk_bus1_pll", "dout_sclk_cc_pll", |
| "dout_sclk_mfc_pll"; |
| }; |
| |
| clock_ccore: clock-controller@105b0000 { |
| compatible = "samsung,exynos7-clock-ccore"; |
| reg = <0x105b0000 0xd00>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_CCORE_133>; |
| clock-names = "fin_pll", "dout_aclk_ccore_133"; |
| }; |
| |
| clock_peric0: clock-controller@13610000 { |
| compatible = "samsung,exynos7-clock-peric0"; |
| reg = <0x13610000 0xd00>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC0>, |
| <&clock_top0 CLK_SCLK_UART0>; |
| clock-names = "fin_pll", "dout_aclk_peric0_66", |
| "sclk_uart0"; |
| }; |
| |
| clock_peric1: clock-controller@14c80000 { |
| compatible = "samsung,exynos7-clock-peric1"; |
| reg = <0x14c80000 0xd00>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_top0 DOUT_ACLK_PERIC1>, |
| <&clock_top0 CLK_SCLK_UART1>, |
| <&clock_top0 CLK_SCLK_UART2>, |
| <&clock_top0 CLK_SCLK_UART3>; |
| clock-names = "fin_pll", "dout_aclk_peric1_66", |
| "sclk_uart1", "sclk_uart2", "sclk_uart3"; |
| }; |
| |
| clock_peris: clock-controller@10040000 { |
| compatible = "samsung,exynos7-clock-peris"; |
| reg = <0x10040000 0xd00>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_topc DOUT_ACLK_PERIS>; |
| clock-names = "fin_pll", "dout_aclk_peris_66"; |
| }; |
| |
| clock_fsys0: clock-controller@10e90000 { |
| compatible = "samsung,exynos7-clock-fsys0"; |
| reg = <0x10e90000 0xd00>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS0_200>, |
| <&clock_top1 DOUT_SCLK_MMC2>; |
| clock-names = "fin_pll", "dout_aclk_fsys0_200", |
| "dout_sclk_mmc2"; |
| }; |
| |
| clock_fsys1: clock-controller@156e0000 { |
| compatible = "samsung,exynos7-clock-fsys1"; |
| reg = <0x156e0000 0xd00>; |
| #clock-cells = <1>; |
| clocks = <&fin_pll>, <&clock_top1 DOUT_ACLK_FSYS1_200>, |
| <&clock_top1 DOUT_SCLK_MMC0>, |
| <&clock_top1 DOUT_SCLK_MMC1>; |
| clock-names = "fin_pll", "dout_aclk_fsys1_200", |
| "dout_sclk_mmc0", "dout_sclk_mmc1"; |
| }; |
| |
| serial_0: serial@13630000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x13630000 0x100>; |
| interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peric0 PCLK_UART0>, |
| <&clock_peric0 SCLK_UART0>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| serial_1: serial@14c20000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x14c20000 0x100>; |
| interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peric1 PCLK_UART1>, |
| <&clock_peric1 SCLK_UART1>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| serial_2: serial@14c30000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x14c30000 0x100>; |
| interrupts = <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peric1 PCLK_UART2>, |
| <&clock_peric1 SCLK_UART2>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| serial_3: serial@14c40000 { |
| compatible = "samsung,exynos4210-uart"; |
| reg = <0x14c40000 0x100>; |
| interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peric1 PCLK_UART3>, |
| <&clock_peric1 SCLK_UART3>; |
| clock-names = "uart", "clk_uart_baud0"; |
| status = "disabled"; |
| }; |
| |
| pinctrl_alive: pinctrl@10580000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x10580000 0x1000>; |
| |
| wakeup-interrupt-controller { |
| compatible = "samsung,exynos7-wakeup-eint"; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| }; |
| |
| pinctrl_bus0: pinctrl@13470000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x13470000 0x1000>; |
| interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_nfc: pinctrl@14cd0000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x14cd0000 0x1000>; |
| interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_touch: pinctrl@14ce0000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x14ce0000 0x1000>; |
| interrupts = <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_ff: pinctrl@14c90000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x14c90000 0x1000>; |
| interrupts = <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_ese: pinctrl@14ca0000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x14ca0000 0x1000>; |
| interrupts = <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_fsys0: pinctrl@10e60000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x10e60000 0x1000>; |
| interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_fsys1: pinctrl@15690000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x15690000 0x1000>; |
| interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pinctrl_bus1: pinctrl@14870000 { |
| compatible = "samsung,exynos7-pinctrl"; |
| reg = <0x14870000 0x1000>; |
| interrupts = <GIC_SPI 384 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| hsi2c_0: hsi2c@13640000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13640000 0x1000>; |
| interrupts = <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c0_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C0>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_1: hsi2c@13650000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13650000 0x1000>; |
| interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c1_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C1>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_2: hsi2c@14e60000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x14e60000 0x1000>; |
| interrupts = <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c2_bus>; |
| clocks = <&clock_peric1 PCLK_HSI2C2>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_3: hsi2c@14e70000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x14e70000 0x1000>; |
| interrupts = <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c3_bus>; |
| clocks = <&clock_peric1 PCLK_HSI2C3>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_4: hsi2c@13660000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13660000 0x1000>; |
| interrupts = <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c4_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C4>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_5: hsi2c@13670000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13670000 0x1000>; |
| interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c5_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C5>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_6: hsi2c@14e00000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x14e00000 0x1000>; |
| interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c6_bus>; |
| clocks = <&clock_peric1 PCLK_HSI2C6>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_7: hsi2c@13e10000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13e10000 0x1000>; |
| interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c7_bus>; |
| clocks = <&clock_peric1 PCLK_HSI2C7>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_8: hsi2c@14e20000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x14e20000 0x1000>; |
| interrupts = <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c8_bus>; |
| clocks = <&clock_peric1 PCLK_HSI2C8>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_9: hsi2c@13680000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13680000 0x1000>; |
| interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c9_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C9>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_10: hsi2c@13690000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x13690000 0x1000>; |
| interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c10_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C10>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| hsi2c_11: hsi2c@136a0000 { |
| compatible = "samsung,exynos7-hsi2c"; |
| reg = <0x136a0000 0x1000>; |
| interrupts = <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&hs_i2c11_bus>; |
| clocks = <&clock_peric0 PCLK_HSI2C11>; |
| clock-names = "hsi2c"; |
| status = "disabled"; |
| }; |
| |
| arm-pmu { |
| compatible = "arm,cortex-a57-pmu", "arm,armv8-pmuv3"; |
| interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; |
| interrupt-affinity = <&cpu_atlas0>, <&cpu_atlas1>, |
| <&cpu_atlas2>, <&cpu_atlas3>; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 |
| (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 14 |
| (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 11 |
| (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, |
| <GIC_PPI 10 |
| (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; |
| }; |
| |
| pmu_system_controller: system-controller@105c0000 { |
| compatible = "samsung,exynos7-pmu", "syscon"; |
| reg = <0x105c0000 0x5000>; |
| }; |
| |
| reboot: syscon-reboot { |
| compatible = "syscon-reboot"; |
| regmap = <&pmu_system_controller>; |
| offset = <0x0400>; |
| mask = <0x1>; |
| }; |
| |
| rtc: rtc@10590000 { |
| compatible = "samsung,s3c6410-rtc"; |
| reg = <0x10590000 0x100>; |
| interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_ccore PCLK_RTC>; |
| clock-names = "rtc"; |
| status = "disabled"; |
| }; |
| |
| watchdog: watchdog@101d0000 { |
| compatible = "samsung,exynos7-wdt"; |
| reg = <0x101d0000 0x100>; |
| interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peris PCLK_WDT>; |
| clock-names = "watchdog"; |
| samsung,syscon-phandle = <&pmu_system_controller>; |
| status = "disabled"; |
| }; |
| |
| mmc_0: mmc@15740000 { |
| compatible = "samsung,exynos7-dw-mshc-smu"; |
| interrupts = <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x15740000 0x2000>; |
| clocks = <&clock_fsys1 ACLK_MMC0>, |
| <&clock_top1 CLK_SCLK_MMC0>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| mmc_1: mmc@15750000 { |
| compatible = "samsung,exynos7-dw-mshc"; |
| interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x15750000 0x2000>; |
| clocks = <&clock_fsys1 ACLK_MMC1>, |
| <&clock_top1 CLK_SCLK_MMC1>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| mmc_2: mmc@15560000 { |
| compatible = "samsung,exynos7-dw-mshc-smu"; |
| interrupts = <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x15560000 0x2000>; |
| clocks = <&clock_fsys0 ACLK_MMC2>, |
| <&clock_top1 CLK_SCLK_MMC2>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x40>; |
| status = "disabled"; |
| }; |
| |
| adc: adc@13620000 { |
| compatible = "samsung,exynos7-adc"; |
| reg = <0x13620000 0x100>; |
| interrupts = <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peric0 PCLK_ADCIF>; |
| clock-names = "adc"; |
| #io-channel-cells = <1>; |
| io-channel-ranges; |
| status = "disabled"; |
| }; |
| |
| pwm: pwm@136c0000 { |
| compatible = "samsung,exynos4210-pwm"; |
| reg = <0x136c0000 0x100>; |
| samsung,pwm-outputs = <0>, <1>, <2>, <3>; |
| #pwm-cells = <3>; |
| clocks = <&clock_peric0 PCLK_PWM>; |
| clock-names = "timers"; |
| }; |
| |
| tmuctrl_0: tmu@10060000 { |
| compatible = "samsung,exynos7-tmu"; |
| reg = <0x10060000 0x200>; |
| interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clock_peris PCLK_TMU>, |
| <&clock_peris SCLK_TMU>; |
| clock-names = "tmu_apbif", "tmu_sclk"; |
| #include "exynos7-tmu-sensor-conf.dtsi" |
| }; |
| |
| thermal-zones { |
| atlas_thermal: cluster0-thermal { |
| polling-delay-passive = <0>; /* milliseconds */ |
| polling-delay = <0>; /* milliseconds */ |
| thermal-sensors = <&tmuctrl_0>; |
| #include "exynos7-trip-points.dtsi" |
| }; |
| }; |
| |
| usbdrd_phy: phy@15500000 { |
| compatible = "samsung,exynos7-usbdrd-phy"; |
| reg = <0x15500000 0x100>; |
| clocks = <&clock_fsys0 ACLK_USBDRD300>, |
| <&clock_fsys0 OSCCLK_PHY_CLKOUT_USB30_PHY>, |
| <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PIPE_PCLK_USER>, |
| <&clock_fsys0 PHYCLK_USBDRD300_UDRD30_PHYCLK_USER>, |
| <&clock_fsys0 SCLK_USBDRD300_REFCLK>; |
| clock-names = "phy", "ref", "phy_pipe", |
| "phy_utmi", "itp"; |
| samsung,pmu-syscon = <&pmu_system_controller>; |
| #phy-cells = <1>; |
| }; |
| |
| usbdrd3 { |
| compatible = "samsung,exynos7-dwusb3"; |
| clocks = <&clock_fsys0 ACLK_USBDRD300>, |
| <&clock_fsys0 SCLK_USBDRD300_SUSPENDCLK>, |
| <&clock_fsys0 ACLK_AXIUS_USBDRD30X_FSYS0X>; |
| clock-names = "usbdrd30", "usbdrd30_susp_clk", |
| "usbdrd30_axius_clk"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| dwc3@15400000 { |
| compatible = "snps,dwc3"; |
| reg = <0x15400000 0x10000>; |
| interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; |
| phys = <&usbdrd_phy 0>, <&usbdrd_phy 1>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| }; |
| }; |
| }; |
| }; |
| |
| #include "exynos7-pinctrl.dtsi" |
