| /* |
| * Reset driver for NXP LPC18xx/43xx Reset Generation Unit (RGU). |
| * |
| * Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| * |
| */ |
| |
| #include <linux/clk.h> |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/init.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/reboot.h> |
| #include <linux/reset-controller.h> |
| #include <linux/spinlock.h> |
| |
| /* LPC18xx RGU registers */ |
| #define LPC18XX_RGU_CTRL0 0x100 |
| #define LPC18XX_RGU_CTRL1 0x104 |
| #define LPC18XX_RGU_ACTIVE_STATUS0 0x150 |
| #define LPC18XX_RGU_ACTIVE_STATUS1 0x154 |
| |
| #define LPC18XX_RGU_RESETS_PER_REG 32 |
| |
| /* Internal reset outputs */ |
| #define LPC18XX_RGU_CORE_RST 0 |
| #define LPC43XX_RGU_M0SUB_RST 12 |
| #define LPC43XX_RGU_M0APP_RST 56 |
| |
| struct lpc18xx_rgu_data { |
| struct reset_controller_dev rcdev; |
| struct notifier_block restart_nb; |
| struct clk *clk_delay; |
| struct clk *clk_reg; |
| void __iomem *base; |
| spinlock_t lock; |
| u32 delay_us; |
| }; |
| |
| #define to_rgu_data(p) container_of(p, struct lpc18xx_rgu_data, rcdev) |
| |
| static int lpc18xx_rgu_restart(struct notifier_block *nb, unsigned long mode, |
| void *cmd) |
| { |
| struct lpc18xx_rgu_data *rc = container_of(nb, struct lpc18xx_rgu_data, |
| restart_nb); |
| |
| writel(BIT(LPC18XX_RGU_CORE_RST), rc->base + LPC18XX_RGU_CTRL0); |
| mdelay(2000); |
| |
| pr_emerg("%s: unable to restart system\n", __func__); |
| |
| return NOTIFY_DONE; |
| } |
| |
| /* |
| * The LPC18xx RGU has mostly self-deasserting resets except for the |
| * two reset lines going to the internal Cortex-M0 cores. |
| * |
| * To prevent the M0 core resets from accidentally getting deasserted |
| * status register must be check and bits in control register set to |
| * preserve the state. |
| */ |
| static int lpc18xx_rgu_setclear_reset(struct reset_controller_dev *rcdev, |
| unsigned long id, bool set) |
| { |
| struct lpc18xx_rgu_data *rc = to_rgu_data(rcdev); |
| u32 stat_offset = LPC18XX_RGU_ACTIVE_STATUS0; |
| u32 ctrl_offset = LPC18XX_RGU_CTRL0; |
| unsigned long flags; |
| u32 stat, rst_bit; |
| |
| stat_offset += (id / LPC18XX_RGU_RESETS_PER_REG) * sizeof(u32); |
| ctrl_offset += (id / LPC18XX_RGU_RESETS_PER_REG) * sizeof(u32); |
| rst_bit = 1 << (id % LPC18XX_RGU_RESETS_PER_REG); |
| |
| spin_lock_irqsave(&rc->lock, flags); |
| stat = ~readl(rc->base + stat_offset); |
| if (set) |
| writel(stat | rst_bit, rc->base + ctrl_offset); |
| else |
| writel(stat & ~rst_bit, rc->base + ctrl_offset); |
| spin_unlock_irqrestore(&rc->lock, flags); |
| |
| return 0; |
| } |
| |
| static int lpc18xx_rgu_assert(struct reset_controller_dev *rcdev, |
| unsigned long id) |
| { |
| return lpc18xx_rgu_setclear_reset(rcdev, id, true); |
| } |
| |
| static int lpc18xx_rgu_deassert(struct reset_controller_dev *rcdev, |
| unsigned long id) |
| { |
| return lpc18xx_rgu_setclear_reset(rcdev, id, false); |
| } |
| |
| /* Only M0 cores require explicit reset deassert */ |
| static int lpc18xx_rgu_reset(struct reset_controller_dev *rcdev, |
| unsigned long id) |
| { |
| struct lpc18xx_rgu_data *rc = to_rgu_data(rcdev); |
| |
| lpc18xx_rgu_assert(rcdev, id); |
| udelay(rc->delay_us); |
| |
| switch (id) { |
| case LPC43XX_RGU_M0SUB_RST: |
| case LPC43XX_RGU_M0APP_RST: |
| lpc18xx_rgu_setclear_reset(rcdev, id, false); |
| } |
| |
| return 0; |
| } |
| |
| static int lpc18xx_rgu_status(struct reset_controller_dev *rcdev, |
| unsigned long id) |
| { |
| struct lpc18xx_rgu_data *rc = to_rgu_data(rcdev); |
| u32 bit, offset = LPC18XX_RGU_ACTIVE_STATUS0; |
| |
| offset += (id / LPC18XX_RGU_RESETS_PER_REG) * sizeof(u32); |
| bit = 1 << (id % LPC18XX_RGU_RESETS_PER_REG); |
| |
| return !(readl(rc->base + offset) & bit); |
| } |
| |
| static const struct reset_control_ops lpc18xx_rgu_ops = { |
| .reset = lpc18xx_rgu_reset, |
| .assert = lpc18xx_rgu_assert, |
| .deassert = lpc18xx_rgu_deassert, |
| .status = lpc18xx_rgu_status, |
| }; |
| |
| static int lpc18xx_rgu_probe(struct platform_device *pdev) |
| { |
| struct lpc18xx_rgu_data *rc; |
| struct resource *res; |
| u32 fcclk, firc; |
| int ret; |
| |
| rc = devm_kzalloc(&pdev->dev, sizeof(*rc), GFP_KERNEL); |
| if (!rc) |
| return -ENOMEM; |
| |
| res = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| rc->base = devm_ioremap_resource(&pdev->dev, res); |
| if (IS_ERR(rc->base)) |
| return PTR_ERR(rc->base); |
| |
| rc->clk_reg = devm_clk_get(&pdev->dev, "reg"); |
| if (IS_ERR(rc->clk_reg)) { |
| dev_err(&pdev->dev, "reg clock not found\n"); |
| return PTR_ERR(rc->clk_reg); |
| } |
| |
| rc->clk_delay = devm_clk_get(&pdev->dev, "delay"); |
| if (IS_ERR(rc->clk_delay)) { |
| dev_err(&pdev->dev, "delay clock not found\n"); |
| return PTR_ERR(rc->clk_delay); |
| } |
| |
| ret = clk_prepare_enable(rc->clk_reg); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to enable reg clock\n"); |
| return ret; |
| } |
| |
| ret = clk_prepare_enable(rc->clk_delay); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to enable delay clock\n"); |
| goto dis_clk_reg; |
| } |
| |
| fcclk = clk_get_rate(rc->clk_reg) / USEC_PER_SEC; |
| firc = clk_get_rate(rc->clk_delay) / USEC_PER_SEC; |
| if (fcclk == 0 || firc == 0) |
| rc->delay_us = 2; |
| else |
| rc->delay_us = DIV_ROUND_UP(fcclk, firc * firc); |
| |
| spin_lock_init(&rc->lock); |
| |
| rc->rcdev.owner = THIS_MODULE; |
| rc->rcdev.nr_resets = 64; |
| rc->rcdev.ops = &lpc18xx_rgu_ops; |
| rc->rcdev.of_node = pdev->dev.of_node; |
| |
| platform_set_drvdata(pdev, rc); |
| |
| ret = reset_controller_register(&rc->rcdev); |
| if (ret) { |
| dev_err(&pdev->dev, "unable to register device\n"); |
| goto dis_clks; |
| } |
| |
| rc->restart_nb.priority = 192, |
| rc->restart_nb.notifier_call = lpc18xx_rgu_restart, |
| ret = register_restart_handler(&rc->restart_nb); |
| if (ret) |
| dev_warn(&pdev->dev, "failed to register restart handler\n"); |
| |
| return 0; |
| |
| dis_clks: |
| clk_disable_unprepare(rc->clk_delay); |
| dis_clk_reg: |
| clk_disable_unprepare(rc->clk_reg); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id lpc18xx_rgu_match[] = { |
| { .compatible = "nxp,lpc1850-rgu" }, |
| { } |
| }; |
| |
| static struct platform_driver lpc18xx_rgu_driver = { |
| .probe = lpc18xx_rgu_probe, |
| .driver = { |
| .name = "lpc18xx-reset", |
| .of_match_table = lpc18xx_rgu_match, |
| .suppress_bind_attrs = true, |
| }, |
| }; |
| builtin_platform_driver(lpc18xx_rgu_driver); |