| if MMU |
| |
| config ARCH_MAY_HAVE_PC_FDC |
| bool |
| depends on BROKEN && (Q40 || SUN3X) |
| default y |
| |
| menu "Platform devices" |
| |
| config HEARTBEAT |
| bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40 |
| default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300 |
| help |
| Use the power-on LED on your machine as a load meter. The exact |
| behavior is platform-dependent, but normally the flash frequency is |
| a hyperbolic function of the 5-minute load average. |
| |
| # We have a dedicated heartbeat LED. :-) |
| config PROC_HARDWARE |
| bool "/proc/hardware support" |
| help |
| Say Y here to support the /proc/hardware file, which gives you |
| access to information about the machine you're running on, |
| including the model, CPU, MMU, clock speed, BogoMIPS rating, |
| and memory size. |
| |
| config NATFEAT |
| bool "ARAnyM emulator support" |
| depends on ATARI |
| help |
| This option enables support for ARAnyM native features, such as |
| access to a disk image as /dev/hda. |
| |
| config NFBLOCK |
| tristate "NatFeat block device support" |
| depends on BLOCK && NATFEAT |
| help |
| Say Y to include support for the ARAnyM NatFeat block device |
| which allows direct access to the hard drives without using |
| the hardware emulation. |
| |
| config NFCON |
| tristate "NatFeat console driver" |
| depends on TTY && NATFEAT |
| help |
| Say Y to include support for the ARAnyM NatFeat console driver |
| which allows the console output to be redirected to the stderr |
| output of ARAnyM. |
| |
| config NFETH |
| tristate "NatFeat Ethernet support" |
| depends on ETHERNET && NATFEAT |
| help |
| Say Y to include support for the ARAnyM NatFeat network device |
| which will emulate a regular ethernet device while presenting an |
| ethertap device to the host system. |
| |
| config ATARI_ETHERNAT |
| bool "Atari EtherNAT Ethernet support" |
| depends on ATARI |
| ---help--- |
| Say Y to include support for the EtherNAT network adapter for the |
| CT/60 extension port. |
| |
| To compile the actual ethernet driver, choose Y or M for the SMC91X |
| option in the network device section; the module will be called smc91x. |
| |
| config ATARI_ETHERNEC |
| bool "Atari EtherNEC Ethernet support" |
| depends on ATARI_ROM_ISA |
| ---help--- |
| Say Y to include support for the EtherNEC network adapter for the |
| ROM port. The driver works by polling instead of interrupts, so it |
| is quite slow. |
| |
| This driver also supports the ethernet part of the NetUSBee ROM |
| port combined Ethernet/USB adapter. |
| |
| To compile the actual ethernet driver, choose Y or M in for the NE2000 |
| option in the network device section; the module will be called ne. |
| |
| endmenu |
| |
| menu "Character devices" |
| |
| config ATARI_DSP56K |
| tristate "Atari DSP56k support" |
| depends on ATARI |
| help |
| If you want to be able to use the DSP56001 in Falcons, say Y. This |
| driver is still experimental, and if you don't know what it is, or |
| if you don't have this processor, just say N. |
| |
| To compile this driver as a module, choose M here. |
| |
| config AMIGA_BUILTIN_SERIAL |
| tristate "Amiga builtin serial support" |
| depends on AMIGA && TTY |
| help |
| If you want to use your Amiga's built-in serial port in Linux, |
| answer Y. |
| |
| To compile this driver as a module, choose M here. |
| |
| config HPDCA |
| tristate "HP DCA serial support" |
| depends on DIO && SERIAL_8250 |
| help |
| If you want to use the internal "DCA" serial ports on an HP300 |
| machine, say Y here. |
| |
| config HPAPCI |
| tristate "HP APCI serial support" |
| depends on HP300 && SERIAL_8250 |
| help |
| If you want to use the internal "APCI" serial ports on an HP400 |
| machine, say Y here. |
| |
| config SERIAL_CONSOLE |
| bool "Support for serial port console" |
| depends on AMIGA_BUILTIN_SERIAL=y |
| ---help--- |
| If you say Y here, it will be possible to use a serial port as the |
| system console (the system console is the device which receives all |
| kernel messages and warnings and which allows logins in single user |
| mode). This could be useful if some terminal or printer is connected |
| to that serial port. |
| |
| Even if you say Y here, the currently visible virtual console |
| (/dev/tty0) will still be used as the system console by default, but |
| you can alter that using a kernel command line option such as |
| "console=ttyS1". (Try "man bootparam" or see the documentation of |
| your boot loader about how to pass options to the kernel at boot |
| time.) |
| |
| If you don't have a graphical console and you say Y here, the |
| kernel will automatically use the first serial line, /dev/ttyS0, as |
| system console. |
| |
| If unsure, say N. |
| |
| endmenu |
| |
| endif |
