| /* |
| * Support for SuperH MigoR Quarter VGA LCD Panel |
| * |
| * Copyright (C) 2008 Magnus Damm |
| * |
| * Based on lcd_powertip.c from Kenati Technologies Pvt Ltd. |
| * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>, |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/delay.h> |
| #include <linux/err.h> |
| #include <linux/fb.h> |
| #include <linux/init.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/gpio.h> |
| #include <video/sh_mobile_lcdc.h> |
| #include <cpu/sh7722.h> |
| #include <mach/migor.h> |
| |
| /* LCD Module is a PH240320T according to board schematics. This module |
| * is made up of a 240x320 LCD hooked up to a R61505U (or HX8347-A01?) |
| * Driver IC. This IC is connected to the SH7722 built-in LCDC using a |
| * SYS-80 interface configured in 16 bit mode. |
| * |
| * Index 0: "Device Code Read" returns 0x1505. |
| */ |
| |
| static void reset_lcd_module(void) |
| { |
| gpio_set_value(GPIO_PTH2, 0); |
| mdelay(2); |
| gpio_set_value(GPIO_PTH2, 1); |
| mdelay(1); |
| } |
| |
| /* DB0-DB7 are connected to D1-D8, and DB8-DB15 to D10-D17 */ |
| |
| static unsigned long adjust_reg18(unsigned short data) |
| { |
| unsigned long tmp1, tmp2; |
| |
| tmp1 = (data<<1 | 0x00000001) & 0x000001FF; |
| tmp2 = (data<<2 | 0x00000200) & 0x0003FE00; |
| return tmp1 | tmp2; |
| } |
| |
| static void write_reg(void *sys_ops_handle, |
| struct sh_mobile_lcdc_sys_bus_ops *sys_ops, |
| unsigned short reg, unsigned short data) |
| { |
| sys_ops->write_index(sys_ops_handle, adjust_reg18(reg << 8 | data)); |
| } |
| |
| static void write_reg16(void *sys_ops_handle, |
| struct sh_mobile_lcdc_sys_bus_ops *sys_ops, |
| unsigned short reg, unsigned short data) |
| { |
| sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); |
| sys_ops->write_data(sys_ops_handle, adjust_reg18(data)); |
| } |
| |
| static unsigned long read_reg16(void *sys_ops_handle, |
| struct sh_mobile_lcdc_sys_bus_ops *sys_ops, |
| unsigned short reg) |
| { |
| unsigned long data; |
| |
| sys_ops->write_index(sys_ops_handle, adjust_reg18(reg)); |
| data = sys_ops->read_data(sys_ops_handle); |
| return ((data >> 1) & 0xff) | ((data >> 2) & 0xff00); |
| } |
| |
| static void migor_lcd_qvga_seq(void *sys_ops_handle, |
| struct sh_mobile_lcdc_sys_bus_ops *sys_ops, |
| unsigned short const *data, int no_data) |
| { |
| int i; |
| |
| for (i = 0; i < no_data; i += 2) |
| write_reg16(sys_ops_handle, sys_ops, data[i], data[i + 1]); |
| } |
| |
| static const unsigned short sync_data[] = { |
| 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, 0x0000, |
| }; |
| |
| static const unsigned short magic0_data[] = { |
| 0x0060, 0x2700, 0x0008, 0x0808, 0x0090, 0x001A, 0x0007, 0x0001, |
| 0x0017, 0x0001, 0x0019, 0x0000, 0x0010, 0x17B0, 0x0011, 0x0116, |
| 0x0012, 0x0198, 0x0013, 0x1400, 0x0029, 0x000C, 0x0012, 0x01B8, |
| }; |
| |
| static const unsigned short magic1_data[] = { |
| 0x0030, 0x0307, 0x0031, 0x0303, 0x0032, 0x0603, 0x0033, 0x0202, |
| 0x0034, 0x0202, 0x0035, 0x0202, 0x0036, 0x1F1F, 0x0037, 0x0303, |
| 0x0038, 0x0303, 0x0039, 0x0603, 0x003A, 0x0202, 0x003B, 0x0102, |
| 0x003C, 0x0204, 0x003D, 0x0000, 0x0001, 0x0100, 0x0002, 0x0300, |
| 0x0003, 0x5028, 0x0020, 0x00ef, 0x0021, 0x0000, 0x0004, 0x0000, |
| 0x0009, 0x0000, 0x000A, 0x0008, 0x000C, 0x0000, 0x000D, 0x0000, |
| 0x0015, 0x8000, |
| }; |
| |
| static const unsigned short magic2_data[] = { |
| 0x0061, 0x0001, 0x0092, 0x0100, 0x0093, 0x0001, 0x0007, 0x0021, |
| }; |
| |
| static const unsigned short magic3_data[] = { |
| 0x0010, 0x16B0, 0x0011, 0x0111, 0x0007, 0x0061, |
| }; |
| |
| int migor_lcd_qvga_setup(void *sohandle, struct sh_mobile_lcdc_sys_bus_ops *so) |
| { |
| unsigned long xres = 320; |
| unsigned long yres = 240; |
| int k; |
| |
| reset_lcd_module(); |
| migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); |
| |
| if (read_reg16(sohandle, so, 0) != 0x1505) |
| return -ENODEV; |
| |
| pr_info("Migo-R QVGA LCD Module detected.\n"); |
| |
| migor_lcd_qvga_seq(sohandle, so, sync_data, ARRAY_SIZE(sync_data)); |
| write_reg16(sohandle, so, 0x00A4, 0x0001); |
| mdelay(10); |
| |
| migor_lcd_qvga_seq(sohandle, so, magic0_data, ARRAY_SIZE(magic0_data)); |
| mdelay(100); |
| |
| migor_lcd_qvga_seq(sohandle, so, magic1_data, ARRAY_SIZE(magic1_data)); |
| write_reg16(sohandle, so, 0x0050, 0xef - (yres - 1)); |
| write_reg16(sohandle, so, 0x0051, 0x00ef); |
| write_reg16(sohandle, so, 0x0052, 0x0000); |
| write_reg16(sohandle, so, 0x0053, xres - 1); |
| |
| migor_lcd_qvga_seq(sohandle, so, magic2_data, ARRAY_SIZE(magic2_data)); |
| mdelay(10); |
| |
| migor_lcd_qvga_seq(sohandle, so, magic3_data, ARRAY_SIZE(magic3_data)); |
| mdelay(40); |
| |
| /* clear GRAM to avoid displaying garbage */ |
| |
| write_reg16(sohandle, so, 0x0020, 0x0000); /* horiz addr */ |
| write_reg16(sohandle, so, 0x0021, 0x0000); /* vert addr */ |
| |
| for (k = 0; k < (xres * 256); k++) /* yes, 256 words per line */ |
| write_reg16(sohandle, so, 0x0022, 0x0000); |
| |
| write_reg16(sohandle, so, 0x0020, 0x0000); /* reset horiz addr */ |
| write_reg16(sohandle, so, 0x0021, 0x0000); /* reset vert addr */ |
| write_reg16(sohandle, so, 0x0007, 0x0173); |
| mdelay(40); |
| |
| /* enable display */ |
| write_reg(sohandle, so, 0x00, 0x22); |
| mdelay(100); |
| return 0; |
| } |