| /* |
| * Blackfin On-Chip CAN Driver |
| * |
| * Copyright 2004-2009 Analog Devices Inc. |
| * |
| * Enter bugs at http://blackfin.uclinux.org/ |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/kernel.h> |
| #include <linux/bitops.h> |
| #include <linux/interrupt.h> |
| #include <linux/errno.h> |
| #include <linux/netdevice.h> |
| #include <linux/skbuff.h> |
| #include <linux/platform_device.h> |
| |
| #include <linux/can/dev.h> |
| #include <linux/can/error.h> |
| |
| #include <asm/portmux.h> |
| |
| #define DRV_NAME "bfin_can" |
| #define BFIN_CAN_TIMEOUT 100 |
| #define TX_ECHO_SKB_MAX 1 |
| |
| /* transmit and receive channels */ |
| #define TRANSMIT_CHL 24 |
| #define RECEIVE_STD_CHL 0 |
| #define RECEIVE_EXT_CHL 4 |
| #define RECEIVE_RTR_CHL 8 |
| #define RECEIVE_EXT_RTR_CHL 12 |
| #define MAX_CHL_NUMBER 32 |
| |
| /* All Blackfin system MMRs are padded to 32bits even if the register |
| * itself is only 16bits. So use a helper macro to streamline this |
| */ |
| #define __BFP(m) u16 m; u16 __pad_##m |
| |
| /* bfin can registers layout */ |
| struct bfin_can_mask_regs { |
| __BFP(aml); |
| __BFP(amh); |
| }; |
| |
| struct bfin_can_channel_regs { |
| /* data[0,2,4,6] -> data{0,1,2,3} while data[1,3,5,7] is padding */ |
| u16 data[8]; |
| __BFP(dlc); |
| __BFP(tsv); |
| __BFP(id0); |
| __BFP(id1); |
| }; |
| |
| struct bfin_can_regs { |
| /* global control and status registers */ |
| __BFP(mc1); /* offset 0x00 */ |
| __BFP(md1); /* offset 0x04 */ |
| __BFP(trs1); /* offset 0x08 */ |
| __BFP(trr1); /* offset 0x0c */ |
| __BFP(ta1); /* offset 0x10 */ |
| __BFP(aa1); /* offset 0x14 */ |
| __BFP(rmp1); /* offset 0x18 */ |
| __BFP(rml1); /* offset 0x1c */ |
| __BFP(mbtif1); /* offset 0x20 */ |
| __BFP(mbrif1); /* offset 0x24 */ |
| __BFP(mbim1); /* offset 0x28 */ |
| __BFP(rfh1); /* offset 0x2c */ |
| __BFP(opss1); /* offset 0x30 */ |
| u32 __pad1[3]; |
| __BFP(mc2); /* offset 0x40 */ |
| __BFP(md2); /* offset 0x44 */ |
| __BFP(trs2); /* offset 0x48 */ |
| __BFP(trr2); /* offset 0x4c */ |
| __BFP(ta2); /* offset 0x50 */ |
| __BFP(aa2); /* offset 0x54 */ |
| __BFP(rmp2); /* offset 0x58 */ |
| __BFP(rml2); /* offset 0x5c */ |
| __BFP(mbtif2); /* offset 0x60 */ |
| __BFP(mbrif2); /* offset 0x64 */ |
| __BFP(mbim2); /* offset 0x68 */ |
| __BFP(rfh2); /* offset 0x6c */ |
| __BFP(opss2); /* offset 0x70 */ |
| u32 __pad2[3]; |
| __BFP(clock); /* offset 0x80 */ |
| __BFP(timing); /* offset 0x84 */ |
| __BFP(debug); /* offset 0x88 */ |
| __BFP(status); /* offset 0x8c */ |
| __BFP(cec); /* offset 0x90 */ |
| __BFP(gis); /* offset 0x94 */ |
| __BFP(gim); /* offset 0x98 */ |
| __BFP(gif); /* offset 0x9c */ |
| __BFP(control); /* offset 0xa0 */ |
| __BFP(intr); /* offset 0xa4 */ |
| __BFP(version); /* offset 0xa8 */ |
| __BFP(mbtd); /* offset 0xac */ |
| __BFP(ewr); /* offset 0xb0 */ |
| __BFP(esr); /* offset 0xb4 */ |
| u32 __pad3[2]; |
| __BFP(ucreg); /* offset 0xc0 */ |
| __BFP(uccnt); /* offset 0xc4 */ |
| __BFP(ucrc); /* offset 0xc8 */ |
| __BFP(uccnf); /* offset 0xcc */ |
| u32 __pad4[1]; |
| __BFP(version2); /* offset 0xd4 */ |
| u32 __pad5[10]; |
| |
| /* channel(mailbox) mask and message registers */ |
| struct bfin_can_mask_regs msk[MAX_CHL_NUMBER]; /* offset 0x100 */ |
| struct bfin_can_channel_regs chl[MAX_CHL_NUMBER]; /* offset 0x200 */ |
| }; |
| |
| #undef __BFP |
| |
| #define SRS 0x0001 /* Software Reset */ |
| #define SER 0x0008 /* Stuff Error */ |
| #define BOIM 0x0008 /* Enable Bus Off Interrupt */ |
| #define CCR 0x0080 /* CAN Configuration Mode Request */ |
| #define CCA 0x0080 /* Configuration Mode Acknowledge */ |
| #define SAM 0x0080 /* Sampling */ |
| #define AME 0x8000 /* Acceptance Mask Enable */ |
| #define RMLIM 0x0080 /* Enable RX Message Lost Interrupt */ |
| #define RMLIS 0x0080 /* RX Message Lost IRQ Status */ |
| #define RTR 0x4000 /* Remote Frame Transmission Request */ |
| #define BOIS 0x0008 /* Bus Off IRQ Status */ |
| #define IDE 0x2000 /* Identifier Extension */ |
| #define EPIS 0x0004 /* Error-Passive Mode IRQ Status */ |
| #define EPIM 0x0004 /* Enable Error-Passive Mode Interrupt */ |
| #define EWTIS 0x0001 /* TX Error Count IRQ Status */ |
| #define EWRIS 0x0002 /* RX Error Count IRQ Status */ |
| #define BEF 0x0040 /* Bit Error Flag */ |
| #define FER 0x0080 /* Form Error Flag */ |
| #define SMR 0x0020 /* Sleep Mode Request */ |
| #define SMACK 0x0008 /* Sleep Mode Acknowledge */ |
| |
| /* |
| * bfin can private data |
| */ |
| struct bfin_can_priv { |
| struct can_priv can; /* must be the first member */ |
| struct net_device *dev; |
| void __iomem *membase; |
| int rx_irq; |
| int tx_irq; |
| int err_irq; |
| unsigned short *pin_list; |
| }; |
| |
| /* |
| * bfin can timing parameters |
| */ |
| static const struct can_bittiming_const bfin_can_bittiming_const = { |
| .name = DRV_NAME, |
| .tseg1_min = 1, |
| .tseg1_max = 16, |
| .tseg2_min = 1, |
| .tseg2_max = 8, |
| .sjw_max = 4, |
| /* |
| * Although the BRP field can be set to any value, it is recommended |
| * that the value be greater than or equal to 4, as restrictions |
| * apply to the bit timing configuration when BRP is less than 4. |
| */ |
| .brp_min = 4, |
| .brp_max = 1024, |
| .brp_inc = 1, |
| }; |
| |
| static int bfin_can_set_bittiming(struct net_device *dev) |
| { |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| struct bfin_can_regs __iomem *reg = priv->membase; |
| struct can_bittiming *bt = &priv->can.bittiming; |
| u16 clk, timing; |
| |
| clk = bt->brp - 1; |
| timing = ((bt->sjw - 1) << 8) | (bt->prop_seg + bt->phase_seg1 - 1) | |
| ((bt->phase_seg2 - 1) << 4); |
| |
| /* |
| * If the SAM bit is set, the input signal is oversampled three times |
| * at the SCLK rate. |
| */ |
| if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES) |
| timing |= SAM; |
| |
| writew(clk, ®->clock); |
| writew(timing, ®->timing); |
| |
| netdev_info(dev, "setting CLOCK=0x%04x TIMING=0x%04x\n", clk, timing); |
| |
| return 0; |
| } |
| |
| static void bfin_can_set_reset_mode(struct net_device *dev) |
| { |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| struct bfin_can_regs __iomem *reg = priv->membase; |
| int timeout = BFIN_CAN_TIMEOUT; |
| int i; |
| |
| /* disable interrupts */ |
| writew(0, ®->mbim1); |
| writew(0, ®->mbim2); |
| writew(0, ®->gim); |
| |
| /* reset can and enter configuration mode */ |
| writew(SRS | CCR, ®->control); |
| writew(CCR, ®->control); |
| while (!(readw(®->control) & CCA)) { |
| udelay(10); |
| if (--timeout == 0) { |
| netdev_err(dev, "fail to enter configuration mode\n"); |
| BUG(); |
| } |
| } |
| |
| /* |
| * All mailbox configurations are marked as inactive |
| * by writing to CAN Mailbox Configuration Registers 1 and 2 |
| * For all bits: 0 - Mailbox disabled, 1 - Mailbox enabled |
| */ |
| writew(0, ®->mc1); |
| writew(0, ®->mc2); |
| |
| /* Set Mailbox Direction */ |
| writew(0xFFFF, ®->md1); /* mailbox 1-16 are RX */ |
| writew(0, ®->md2); /* mailbox 17-32 are TX */ |
| |
| /* RECEIVE_STD_CHL */ |
| for (i = 0; i < 2; i++) { |
| writew(0, ®->chl[RECEIVE_STD_CHL + i].id0); |
| writew(AME, ®->chl[RECEIVE_STD_CHL + i].id1); |
| writew(0, ®->chl[RECEIVE_STD_CHL + i].dlc); |
| writew(0x1FFF, ®->msk[RECEIVE_STD_CHL + i].amh); |
| writew(0xFFFF, ®->msk[RECEIVE_STD_CHL + i].aml); |
| } |
| |
| /* RECEIVE_EXT_CHL */ |
| for (i = 0; i < 2; i++) { |
| writew(0, ®->chl[RECEIVE_EXT_CHL + i].id0); |
| writew(AME | IDE, ®->chl[RECEIVE_EXT_CHL + i].id1); |
| writew(0, ®->chl[RECEIVE_EXT_CHL + i].dlc); |
| writew(0x1FFF, ®->msk[RECEIVE_EXT_CHL + i].amh); |
| writew(0xFFFF, ®->msk[RECEIVE_EXT_CHL + i].aml); |
| } |
| |
| writew(BIT(TRANSMIT_CHL - 16), ®->mc2); |
| writew(BIT(RECEIVE_STD_CHL) + BIT(RECEIVE_EXT_CHL), ®->mc1); |
| |
| priv->can.state = CAN_STATE_STOPPED; |
| } |
| |
| static void bfin_can_set_normal_mode(struct net_device *dev) |
| { |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| struct bfin_can_regs __iomem *reg = priv->membase; |
| int timeout = BFIN_CAN_TIMEOUT; |
| |
| /* |
| * leave configuration mode |
| */ |
| writew(readw(®->control) & ~CCR, ®->control); |
| |
| while (readw(®->status) & CCA) { |
| udelay(10); |
| if (--timeout == 0) { |
| netdev_err(dev, "fail to leave configuration mode\n"); |
| BUG(); |
| } |
| } |
| |
| /* |
| * clear _All_ tx and rx interrupts |
| */ |
| writew(0xFFFF, ®->mbtif1); |
| writew(0xFFFF, ®->mbtif2); |
| writew(0xFFFF, ®->mbrif1); |
| writew(0xFFFF, ®->mbrif2); |
| |
| /* |
| * clear global interrupt status register |
| */ |
| writew(0x7FF, ®->gis); /* overwrites with '1' */ |
| |
| /* |
| * Initialize Interrupts |
| * - set bits in the mailbox interrupt mask register |
| * - global interrupt mask |
| */ |
| writew(BIT(RECEIVE_STD_CHL) + BIT(RECEIVE_EXT_CHL), ®->mbim1); |
| writew(BIT(TRANSMIT_CHL - 16), ®->mbim2); |
| |
| writew(EPIM | BOIM | RMLIM, ®->gim); |
| } |
| |
| static void bfin_can_start(struct net_device *dev) |
| { |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| |
| /* enter reset mode */ |
| if (priv->can.state != CAN_STATE_STOPPED) |
| bfin_can_set_reset_mode(dev); |
| |
| /* leave reset mode */ |
| bfin_can_set_normal_mode(dev); |
| } |
| |
| static int bfin_can_set_mode(struct net_device *dev, enum can_mode mode) |
| { |
| switch (mode) { |
| case CAN_MODE_START: |
| bfin_can_start(dev); |
| if (netif_queue_stopped(dev)) |
| netif_wake_queue(dev); |
| break; |
| |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| return 0; |
| } |
| |
| static int bfin_can_get_berr_counter(const struct net_device *dev, |
| struct can_berr_counter *bec) |
| { |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| struct bfin_can_regs __iomem *reg = priv->membase; |
| |
| u16 cec = readw(®->cec); |
| |
| bec->txerr = cec >> 8; |
| bec->rxerr = cec; |
| |
| return 0; |
| } |
| |
| static int bfin_can_start_xmit(struct sk_buff *skb, struct net_device *dev) |
| { |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| struct bfin_can_regs __iomem *reg = priv->membase; |
| struct can_frame *cf = (struct can_frame *)skb->data; |
| u8 dlc = cf->can_dlc; |
| canid_t id = cf->can_id; |
| u8 *data = cf->data; |
| u16 val; |
| int i; |
| |
| if (can_dropped_invalid_skb(dev, skb)) |
| return NETDEV_TX_OK; |
| |
| netif_stop_queue(dev); |
| |
| /* fill id */ |
| if (id & CAN_EFF_FLAG) { |
| writew(id, ®->chl[TRANSMIT_CHL].id0); |
| val = ((id & 0x1FFF0000) >> 16) | IDE; |
| } else |
| val = (id << 2); |
| if (id & CAN_RTR_FLAG) |
| val |= RTR; |
| writew(val | AME, ®->chl[TRANSMIT_CHL].id1); |
| |
| /* fill payload */ |
| for (i = 0; i < 8; i += 2) { |
| val = ((7 - i) < dlc ? (data[7 - i]) : 0) + |
| ((6 - i) < dlc ? (data[6 - i] << 8) : 0); |
| writew(val, ®->chl[TRANSMIT_CHL].data[i]); |
| } |
| |
| /* fill data length code */ |
| writew(dlc, ®->chl[TRANSMIT_CHL].dlc); |
| |
| can_put_echo_skb(skb, dev, 0); |
| |
| /* set transmit request */ |
| writew(BIT(TRANSMIT_CHL - 16), ®->trs2); |
| |
| return 0; |
| } |
| |
| static void bfin_can_rx(struct net_device *dev, u16 isrc) |
| { |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| struct net_device_stats *stats = &dev->stats; |
| struct bfin_can_regs __iomem *reg = priv->membase; |
| struct can_frame *cf; |
| struct sk_buff *skb; |
| int obj; |
| int i; |
| u16 val; |
| |
| skb = alloc_can_skb(dev, &cf); |
| if (skb == NULL) |
| return; |
| |
| /* get id */ |
| if (isrc & BIT(RECEIVE_EXT_CHL)) { |
| /* extended frame format (EFF) */ |
| cf->can_id = ((readw(®->chl[RECEIVE_EXT_CHL].id1) |
| & 0x1FFF) << 16) |
| + readw(®->chl[RECEIVE_EXT_CHL].id0); |
| cf->can_id |= CAN_EFF_FLAG; |
| obj = RECEIVE_EXT_CHL; |
| } else { |
| /* standard frame format (SFF) */ |
| cf->can_id = (readw(®->chl[RECEIVE_STD_CHL].id1) |
| & 0x1ffc) >> 2; |
| obj = RECEIVE_STD_CHL; |
| } |
| if (readw(®->chl[obj].id1) & RTR) |
| cf->can_id |= CAN_RTR_FLAG; |
| |
| /* get data length code */ |
| cf->can_dlc = get_can_dlc(readw(®->chl[obj].dlc) & 0xF); |
| |
| /* get payload */ |
| for (i = 0; i < 8; i += 2) { |
| val = readw(®->chl[obj].data[i]); |
| cf->data[7 - i] = (7 - i) < cf->can_dlc ? val : 0; |
| cf->data[6 - i] = (6 - i) < cf->can_dlc ? (val >> 8) : 0; |
| } |
| |
| stats->rx_packets++; |
| stats->rx_bytes += cf->can_dlc; |
| netif_rx(skb); |
| } |
| |
| static int bfin_can_err(struct net_device *dev, u16 isrc, u16 status) |
| { |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| struct bfin_can_regs __iomem *reg = priv->membase; |
| struct net_device_stats *stats = &dev->stats; |
| struct can_frame *cf; |
| struct sk_buff *skb; |
| enum can_state state = priv->can.state; |
| |
| skb = alloc_can_err_skb(dev, &cf); |
| if (skb == NULL) |
| return -ENOMEM; |
| |
| if (isrc & RMLIS) { |
| /* data overrun interrupt */ |
| netdev_dbg(dev, "data overrun interrupt\n"); |
| cf->can_id |= CAN_ERR_CRTL; |
| cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW; |
| stats->rx_over_errors++; |
| stats->rx_errors++; |
| } |
| |
| if (isrc & BOIS) { |
| netdev_dbg(dev, "bus-off mode interrupt\n"); |
| state = CAN_STATE_BUS_OFF; |
| cf->can_id |= CAN_ERR_BUSOFF; |
| priv->can.can_stats.bus_off++; |
| can_bus_off(dev); |
| } |
| |
| if (isrc & EPIS) { |
| /* error passive interrupt */ |
| netdev_dbg(dev, "error passive interrupt\n"); |
| state = CAN_STATE_ERROR_PASSIVE; |
| } |
| |
| if ((isrc & EWTIS) || (isrc & EWRIS)) { |
| netdev_dbg(dev, "Error Warning Transmit/Receive Interrupt\n"); |
| state = CAN_STATE_ERROR_WARNING; |
| } |
| |
| if (state != priv->can.state && (state == CAN_STATE_ERROR_WARNING || |
| state == CAN_STATE_ERROR_PASSIVE)) { |
| u16 cec = readw(®->cec); |
| u8 rxerr = cec; |
| u8 txerr = cec >> 8; |
| |
| cf->can_id |= CAN_ERR_CRTL; |
| if (state == CAN_STATE_ERROR_WARNING) { |
| priv->can.can_stats.error_warning++; |
| cf->data[1] = (txerr > rxerr) ? |
| CAN_ERR_CRTL_TX_WARNING : |
| CAN_ERR_CRTL_RX_WARNING; |
| } else { |
| priv->can.can_stats.error_passive++; |
| cf->data[1] = (txerr > rxerr) ? |
| CAN_ERR_CRTL_TX_PASSIVE : |
| CAN_ERR_CRTL_RX_PASSIVE; |
| } |
| } |
| |
| if (status) { |
| priv->can.can_stats.bus_error++; |
| |
| cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR; |
| |
| if (status & BEF) |
| cf->data[2] |= CAN_ERR_PROT_BIT; |
| else if (status & FER) |
| cf->data[2] |= CAN_ERR_PROT_FORM; |
| else if (status & SER) |
| cf->data[2] |= CAN_ERR_PROT_STUFF; |
| } |
| |
| priv->can.state = state; |
| |
| stats->rx_packets++; |
| stats->rx_bytes += cf->can_dlc; |
| netif_rx(skb); |
| |
| return 0; |
| } |
| |
| static irqreturn_t bfin_can_interrupt(int irq, void *dev_id) |
| { |
| struct net_device *dev = dev_id; |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| struct bfin_can_regs __iomem *reg = priv->membase; |
| struct net_device_stats *stats = &dev->stats; |
| u16 status, isrc; |
| |
| if ((irq == priv->tx_irq) && readw(®->mbtif2)) { |
| /* transmission complete interrupt */ |
| writew(0xFFFF, ®->mbtif2); |
| stats->tx_packets++; |
| stats->tx_bytes += readw(®->chl[TRANSMIT_CHL].dlc); |
| can_get_echo_skb(dev, 0); |
| netif_wake_queue(dev); |
| } else if ((irq == priv->rx_irq) && readw(®->mbrif1)) { |
| /* receive interrupt */ |
| isrc = readw(®->mbrif1); |
| writew(0xFFFF, ®->mbrif1); |
| bfin_can_rx(dev, isrc); |
| } else if ((irq == priv->err_irq) && readw(®->gis)) { |
| /* error interrupt */ |
| isrc = readw(®->gis); |
| status = readw(®->esr); |
| writew(0x7FF, ®->gis); |
| bfin_can_err(dev, isrc, status); |
| } else { |
| return IRQ_NONE; |
| } |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int bfin_can_open(struct net_device *dev) |
| { |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| int err; |
| |
| /* set chip into reset mode */ |
| bfin_can_set_reset_mode(dev); |
| |
| /* common open */ |
| err = open_candev(dev); |
| if (err) |
| goto exit_open; |
| |
| /* register interrupt handler */ |
| err = request_irq(priv->rx_irq, &bfin_can_interrupt, 0, |
| "bfin-can-rx", dev); |
| if (err) |
| goto exit_rx_irq; |
| err = request_irq(priv->tx_irq, &bfin_can_interrupt, 0, |
| "bfin-can-tx", dev); |
| if (err) |
| goto exit_tx_irq; |
| err = request_irq(priv->err_irq, &bfin_can_interrupt, 0, |
| "bfin-can-err", dev); |
| if (err) |
| goto exit_err_irq; |
| |
| bfin_can_start(dev); |
| |
| netif_start_queue(dev); |
| |
| return 0; |
| |
| exit_err_irq: |
| free_irq(priv->tx_irq, dev); |
| exit_tx_irq: |
| free_irq(priv->rx_irq, dev); |
| exit_rx_irq: |
| close_candev(dev); |
| exit_open: |
| return err; |
| } |
| |
| static int bfin_can_close(struct net_device *dev) |
| { |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| |
| netif_stop_queue(dev); |
| bfin_can_set_reset_mode(dev); |
| |
| close_candev(dev); |
| |
| free_irq(priv->rx_irq, dev); |
| free_irq(priv->tx_irq, dev); |
| free_irq(priv->err_irq, dev); |
| |
| return 0; |
| } |
| |
| static struct net_device *alloc_bfin_candev(void) |
| { |
| struct net_device *dev; |
| struct bfin_can_priv *priv; |
| |
| dev = alloc_candev(sizeof(*priv), TX_ECHO_SKB_MAX); |
| if (!dev) |
| return NULL; |
| |
| priv = netdev_priv(dev); |
| |
| priv->dev = dev; |
| priv->can.bittiming_const = &bfin_can_bittiming_const; |
| priv->can.do_set_bittiming = bfin_can_set_bittiming; |
| priv->can.do_set_mode = bfin_can_set_mode; |
| priv->can.do_get_berr_counter = bfin_can_get_berr_counter; |
| priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES; |
| |
| return dev; |
| } |
| |
| static const struct net_device_ops bfin_can_netdev_ops = { |
| .ndo_open = bfin_can_open, |
| .ndo_stop = bfin_can_close, |
| .ndo_start_xmit = bfin_can_start_xmit, |
| .ndo_change_mtu = can_change_mtu, |
| }; |
| |
| static int bfin_can_probe(struct platform_device *pdev) |
| { |
| int err; |
| struct net_device *dev; |
| struct bfin_can_priv *priv; |
| struct resource *res_mem, *rx_irq, *tx_irq, *err_irq; |
| unsigned short *pdata; |
| |
| pdata = dev_get_platdata(&pdev->dev); |
| if (!pdata) { |
| dev_err(&pdev->dev, "No platform data provided!\n"); |
| err = -EINVAL; |
| goto exit; |
| } |
| |
| res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); |
| rx_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); |
| tx_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 1); |
| err_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 2); |
| if (!res_mem || !rx_irq || !tx_irq || !err_irq) { |
| err = -EINVAL; |
| goto exit; |
| } |
| |
| /* request peripheral pins */ |
| err = peripheral_request_list(pdata, dev_name(&pdev->dev)); |
| if (err) |
| goto exit; |
| |
| dev = alloc_bfin_candev(); |
| if (!dev) { |
| err = -ENOMEM; |
| goto exit_peri_pin_free; |
| } |
| |
| priv = netdev_priv(dev); |
| |
| priv->membase = devm_ioremap_resource(&pdev->dev, res_mem); |
| if (IS_ERR(priv->membase)) { |
| err = PTR_ERR(priv->membase); |
| goto exit_peri_pin_free; |
| } |
| |
| priv->rx_irq = rx_irq->start; |
| priv->tx_irq = tx_irq->start; |
| priv->err_irq = err_irq->start; |
| priv->pin_list = pdata; |
| priv->can.clock.freq = get_sclk(); |
| |
| platform_set_drvdata(pdev, dev); |
| SET_NETDEV_DEV(dev, &pdev->dev); |
| |
| dev->flags |= IFF_ECHO; /* we support local echo */ |
| dev->netdev_ops = &bfin_can_netdev_ops; |
| |
| bfin_can_set_reset_mode(dev); |
| |
| err = register_candev(dev); |
| if (err) { |
| dev_err(&pdev->dev, "registering failed (err=%d)\n", err); |
| goto exit_candev_free; |
| } |
| |
| dev_info(&pdev->dev, |
| "%s device registered" |
| "(®_base=%p, rx_irq=%d, tx_irq=%d, err_irq=%d, sclk=%d)\n", |
| DRV_NAME, priv->membase, priv->rx_irq, |
| priv->tx_irq, priv->err_irq, priv->can.clock.freq); |
| return 0; |
| |
| exit_candev_free: |
| free_candev(dev); |
| exit_peri_pin_free: |
| peripheral_free_list(pdata); |
| exit: |
| return err; |
| } |
| |
| static int bfin_can_remove(struct platform_device *pdev) |
| { |
| struct net_device *dev = platform_get_drvdata(pdev); |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| |
| bfin_can_set_reset_mode(dev); |
| |
| unregister_candev(dev); |
| |
| peripheral_free_list(priv->pin_list); |
| |
| free_candev(dev); |
| return 0; |
| } |
| |
| #ifdef CONFIG_PM |
| static int bfin_can_suspend(struct platform_device *pdev, pm_message_t mesg) |
| { |
| struct net_device *dev = platform_get_drvdata(pdev); |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| struct bfin_can_regs __iomem *reg = priv->membase; |
| int timeout = BFIN_CAN_TIMEOUT; |
| |
| if (netif_running(dev)) { |
| /* enter sleep mode */ |
| writew(readw(®->control) | SMR, ®->control); |
| while (!(readw(®->intr) & SMACK)) { |
| udelay(10); |
| if (--timeout == 0) { |
| netdev_err(dev, "fail to enter sleep mode\n"); |
| BUG(); |
| } |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int bfin_can_resume(struct platform_device *pdev) |
| { |
| struct net_device *dev = platform_get_drvdata(pdev); |
| struct bfin_can_priv *priv = netdev_priv(dev); |
| struct bfin_can_regs __iomem *reg = priv->membase; |
| |
| if (netif_running(dev)) { |
| /* leave sleep mode */ |
| writew(0, ®->intr); |
| } |
| |
| return 0; |
| } |
| #else |
| #define bfin_can_suspend NULL |
| #define bfin_can_resume NULL |
| #endif /* CONFIG_PM */ |
| |
| static struct platform_driver bfin_can_driver = { |
| .probe = bfin_can_probe, |
| .remove = bfin_can_remove, |
| .suspend = bfin_can_suspend, |
| .resume = bfin_can_resume, |
| .driver = { |
| .name = DRV_NAME, |
| }, |
| }; |
| |
| module_platform_driver(bfin_can_driver); |
| |
| MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("Blackfin on-chip CAN netdevice driver"); |
| MODULE_ALIAS("platform:" DRV_NAME); |