| /* |
| * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/of_address.h> |
| #include <linux/platform_device.h> |
| #include <linux/thermal.h> |
| |
| #define PVTMON_CONTROL0 0x00 |
| #define PVTMON_CONTROL0_SEL_MASK 0x0000000e |
| #define PVTMON_CONTROL0_SEL_TEMP_MONITOR 0x00000000 |
| #define PVTMON_CONTROL0_SEL_TEST_MODE 0x0000000e |
| #define PVTMON_STATUS 0x08 |
| |
| struct ns_thermal { |
| struct thermal_zone_device *tz; |
| void __iomem *pvtmon; |
| }; |
| |
| static int ns_thermal_get_temp(void *data, int *temp) |
| { |
| struct ns_thermal *ns_thermal = data; |
| int offset = thermal_zone_get_offset(ns_thermal->tz); |
| int slope = thermal_zone_get_slope(ns_thermal->tz); |
| u32 val; |
| |
| val = readl(ns_thermal->pvtmon + PVTMON_CONTROL0); |
| if ((val & PVTMON_CONTROL0_SEL_MASK) != PVTMON_CONTROL0_SEL_TEMP_MONITOR) { |
| /* Clear current mode selection */ |
| val &= ~PVTMON_CONTROL0_SEL_MASK; |
| |
| /* Set temp monitor mode (it's the default actually) */ |
| val |= PVTMON_CONTROL0_SEL_TEMP_MONITOR; |
| |
| writel(val, ns_thermal->pvtmon + PVTMON_CONTROL0); |
| } |
| |
| val = readl(ns_thermal->pvtmon + PVTMON_STATUS); |
| *temp = slope * val + offset; |
| |
| return 0; |
| } |
| |
| static const struct thermal_zone_of_device_ops ns_thermal_ops = { |
| .get_temp = ns_thermal_get_temp, |
| }; |
| |
| static int ns_thermal_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct ns_thermal *ns_thermal; |
| |
| ns_thermal = devm_kzalloc(dev, sizeof(*ns_thermal), GFP_KERNEL); |
| if (!ns_thermal) |
| return -ENOMEM; |
| |
| ns_thermal->pvtmon = of_iomap(dev_of_node(dev), 0); |
| if (WARN_ON(!ns_thermal->pvtmon)) |
| return -ENOENT; |
| |
| ns_thermal->tz = devm_thermal_zone_of_sensor_register(dev, 0, |
| ns_thermal, |
| &ns_thermal_ops); |
| if (IS_ERR(ns_thermal->tz)) { |
| iounmap(ns_thermal->pvtmon); |
| return PTR_ERR(ns_thermal->tz); |
| } |
| |
| platform_set_drvdata(pdev, ns_thermal); |
| |
| return 0; |
| } |
| |
| static int ns_thermal_remove(struct platform_device *pdev) |
| { |
| struct ns_thermal *ns_thermal = platform_get_drvdata(pdev); |
| |
| iounmap(ns_thermal->pvtmon); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id ns_thermal_of_match[] = { |
| { .compatible = "brcm,ns-thermal", }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, ns_thermal_of_match); |
| |
| static struct platform_driver ns_thermal_driver = { |
| .probe = ns_thermal_probe, |
| .remove = ns_thermal_remove, |
| .driver = { |
| .name = "ns-thermal", |
| .of_match_table = ns_thermal_of_match, |
| }, |
| }; |
| module_platform_driver(ns_thermal_driver); |
| |
| MODULE_AUTHOR("Rafał Miłecki <rafal@milecki.pl>"); |
| MODULE_DESCRIPTION("Northstar thermal driver"); |
| MODULE_LICENSE("GPL v2"); |