| # | |
| # ADC drivers | |
| # | |
| # When adding new entries keep the list in alphabetical order | |
| menu "Analog to digital converters" | |
| config AD_SIGMA_DELTA | |
| tristate | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| config AD7266 | |
| tristate "Analog Devices AD7265/AD7266 ADC driver" | |
| depends on SPI_MASTER | |
| select IIO_BUFFER | |
| select IIO_TRIGGER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Analog Devices AD7265 and AD7266 | |
| ADCs. | |
| To compile this driver as a module, choose M here: the module will be | |
| called ad7266. | |
| config AD7291 | |
| tristate "Analog Devices AD7291 ADC driver" | |
| depends on I2C | |
| help | |
| Say yes here to build support for Analog Devices AD7291 | |
| 8 Channel ADC with temperature sensor. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ad7291. | |
| config AD7298 | |
| tristate "Analog Devices AD7298 ADC driver" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Analog Devices AD7298 | |
| 8 Channel ADC with temperature sensor. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ad7298. | |
| config AD7476 | |
| tristate "Analog Devices AD7476 and similar 1-channel ADCs driver" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Analog Devices AD7273, AD7274, AD7276, | |
| AD7277, AD7278, AD7475, AD7476, AD7477, AD7478, AD7466, AD7467, AD7468, | |
| AD7495, AD7910, AD7920, AD7920 SPI analog to digital converters (ADC). | |
| To compile this driver as a module, choose M here: the | |
| module will be called ad7476. | |
| config AD7766 | |
| tristate "Analog Devices AD7766/AD7767 ADC driver" | |
| depends on SPI_MASTER | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Analog Devices AD7766, AD7766-1, | |
| AD7766-2, AD7767, AD7767-1, AD7767-2 SPI analog to digital converters. | |
| To compile this driver as a module, choose M here: the module will be | |
| called ad7766. | |
| config AD7791 | |
| tristate "Analog Devices AD7791 ADC driver" | |
| depends on SPI | |
| select AD_SIGMA_DELTA | |
| help | |
| Say yes here to build support for Analog Devices AD7787, AD7788, AD7789, | |
| AD7790 and AD7791 SPI analog to digital converters (ADC). | |
| To compile this driver as a module, choose M here: the module will be | |
| called ad7791. | |
| config AD7793 | |
| tristate "Analog Devices AD7793 and similar ADCs driver" | |
| depends on SPI | |
| select AD_SIGMA_DELTA | |
| help | |
| Say yes here to build support for Analog Devices AD7785, AD7792, AD7793, | |
| AD7794 and AD7795 SPI analog to digital converters (ADC). | |
| To compile this driver as a module, choose M here: the | |
| module will be called AD7793. | |
| config AD7887 | |
| tristate "Analog Devices AD7887 ADC driver" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Analog Devices | |
| AD7887 SPI analog to digital converter (ADC). | |
| To compile this driver as a module, choose M here: the | |
| module will be called ad7887. | |
| config AD7923 | |
| tristate "Analog Devices AD7923 and similar ADCs driver" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Analog Devices | |
| AD7904, AD7914, AD7923, AD7924 4 Channel ADCs. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ad7923. | |
| config AD799X | |
| tristate "Analog Devices AD799x ADC driver" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Analog Devices: | |
| ad7991, ad7995, ad7999, ad7992, ad7993, ad7994, ad7997, ad7998 | |
| i2c analog to digital converters (ADC). Provides direct access | |
| via sysfs. | |
| To compile this driver as a module, choose M here: the module will be | |
| called ad799x. | |
| config ASPEED_ADC | |
| tristate "Aspeed ADC" | |
| depends on ARCH_ASPEED || COMPILE_TEST | |
| depends on COMMON_CLK | |
| help | |
| If you say yes here you get support for the ADC included in Aspeed | |
| BMC SoCs. | |
| To compile this driver as a module, choose M here: the module will be | |
| called aspeed_adc. | |
| config AT91_ADC | |
| tristate "Atmel AT91 ADC" | |
| depends on ARCH_AT91 | |
| depends on INPUT | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| select SYSFS | |
| help | |
| Say yes here to build support for Atmel AT91 ADC. | |
| To compile this driver as a module, choose M here: the module will be | |
| called at91_adc. | |
| config AT91_SAMA5D2_ADC | |
| tristate "Atmel AT91 SAMA5D2 ADC" | |
| depends on ARCH_AT91 || COMPILE_TEST | |
| depends on HAS_IOMEM | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Atmel SAMA5D2 ADC which is | |
| available on SAMA5D2 SoC family. | |
| To compile this driver as a module, choose M here: the module will be | |
| called at91-sama5d2_adc. | |
| config AXP20X_ADC | |
| tristate "X-Powers AXP20X and AXP22X ADC driver" | |
| depends on MFD_AXP20X | |
| help | |
| Say yes here to have support for X-Powers power management IC (PMIC) | |
| AXP20X and AXP22X ADC devices. | |
| To compile this driver as a module, choose M here: the module will be | |
| called axp20x_adc. | |
| config AXP288_ADC | |
| tristate "X-Powers AXP288 ADC driver" | |
| depends on MFD_AXP20X | |
| help | |
| Say yes here to have support for X-Powers power management IC (PMIC) ADC | |
| device. Depending on platform configuration, this general purpose ADC can | |
| be used for sampling sensors such as thermal resistors. | |
| To compile this driver as a module, choose M here: the module will be | |
| called axp288_adc. | |
| config BCM_IPROC_ADC | |
| tristate "Broadcom IPROC ADC driver" | |
| depends on ARCH_BCM_IPROC || COMPILE_TEST | |
| depends on MFD_SYSCON | |
| default ARCH_BCM_CYGNUS | |
| help | |
| Say Y here if you want to add support for the Broadcom static | |
| ADC driver. | |
| Broadcom iProc ADC driver. Broadcom iProc ADC controller has 8 | |
| channels. The driver allows the user to read voltage values. | |
| config BERLIN2_ADC | |
| tristate "Marvell Berlin2 ADC driver" | |
| depends on ARCH_BERLIN | |
| help | |
| Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for | |
| temperature measurement. | |
| config CC10001_ADC | |
| tristate "Cosmic Circuits 10001 ADC driver" | |
| depends on HAS_IOMEM && HAVE_CLK && REGULATOR | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Cosmic Circuits 10001 ADC. | |
| This driver can also be built as a module. If so, the module will be | |
| called cc10001_adc. | |
| config CPCAP_ADC | |
| tristate "Motorola CPCAP PMIC ADC driver" | |
| depends on MFD_CPCAP | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Motorola CPCAP PMIC ADC. | |
| This driver can also be built as a module. If so, the module will be | |
| called cpcap-adc. | |
| config DA9150_GPADC | |
| tristate "Dialog DA9150 GPADC driver support" | |
| depends on MFD_DA9150 | |
| help | |
| Say yes here to build support for Dialog DA9150 GPADC. | |
| This driver can also be built as a module. If chosen, the module name | |
| will be da9150-gpadc. | |
| To compile this driver as a module, choose M here: the module will be | |
| called berlin2-adc. | |
| config DLN2_ADC | |
| tristate "Diolan DLN-2 ADC driver support" | |
| depends on MFD_DLN2 | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Diolan DLN-2 ADC. | |
| This driver can also be built as a module. If so, the module will be | |
| called adc_dln2. | |
| config ENVELOPE_DETECTOR | |
| tristate "Envelope detector using a DAC and a comparator" | |
| depends on OF | |
| help | |
| Say yes here to build support for an envelope detector using a DAC | |
| and a comparator. | |
| To compile this driver as a module, choose M here: the module will be | |
| called envelope-detector. | |
| config EP93XX_ADC | |
| tristate "Cirrus Logic EP93XX ADC driver" | |
| depends on ARCH_EP93XX | |
| help | |
| Driver for the ADC module on the EP93XX series of SoC from Cirrus Logic. | |
| It's recommended to switch on CONFIG_HIGH_RES_TIMERS option, in this | |
| case driver will reduce its CPU usage by 90% in some use cases. | |
| To compile this driver as a module, choose M here: the module will be | |
| called ep93xx_adc. | |
| config EXYNOS_ADC | |
| tristate "Exynos ADC driver support" | |
| depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST) | |
| depends on HAS_IOMEM | |
| help | |
| Core support for the ADC block found in the Samsung EXYNOS series | |
| of SoCs for drivers such as the touchscreen and hwmon to use to share | |
| this resource. | |
| To compile this driver as a module, choose M here: the module will be | |
| called exynos_adc. | |
| config MXS_LRADC_ADC | |
| tristate "Freescale i.MX23/i.MX28 LRADC ADC" | |
| depends on MFD_MXS_LRADC | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for the ADC functions of the | |
| i.MX23/i.MX28 LRADC. This includes general-purpose ADC readings, | |
| battery voltage measurement, and die temperature measurement. | |
| This driver can also be built as a module. If so, the module will be | |
| called mxs-lradc-adc. | |
| config FSL_MX25_ADC | |
| tristate "Freescale MX25 ADC driver" | |
| depends on MFD_MX25_TSADC | |
| help | |
| Generic Conversion Queue driver used for general purpose ADC in the | |
| MX25. This driver supports single measurements using the MX25 ADC. | |
| config HI8435 | |
| tristate "Holt Integrated Circuits HI-8435 threshold detector" | |
| select IIO_TRIGGERED_EVENT | |
| depends on SPI | |
| help | |
| If you say yes here you get support for Holt Integrated Circuits | |
| HI-8435 chip. | |
| This driver can also be built as a module. If so, the module will be | |
| called hi8435. | |
| config HX711 | |
| tristate "AVIA HX711 ADC for weight cells" | |
| depends on GPIOLIB | |
| help | |
| If you say yes here you get support for AVIA HX711 ADC which is used | |
| for weigh cells | |
| This driver uses two GPIOs, one acts as the clock and controls the | |
| channel selection and gain, the other one is used for the measurement | |
| data | |
| Currently the raw value is read from the chip and delivered. | |
| To get an actual weight one needs to subtract the | |
| zero offset and multiply by a scale factor. | |
| This should be done in userspace. | |
| This driver can also be built as a module. If so, the module will be | |
| called hx711. | |
| config INA2XX_ADC | |
| tristate "Texas Instruments INA2xx Power Monitors IIO driver" | |
| depends on I2C && !SENSORS_INA2XX | |
| select REGMAP_I2C | |
| select IIO_BUFFER | |
| select IIO_KFIFO_BUF | |
| help | |
| Say yes here to build support for TI INA2xx family of Power Monitors. | |
| This driver is mutually exclusive with the HWMON version. | |
| config IMX7D_ADC | |
| tristate "Freescale IMX7D ADC driver" | |
| depends on ARCH_MXC || COMPILE_TEST | |
| depends on HAS_IOMEM | |
| help | |
| Say yes here to build support for IMX7D ADC. | |
| This driver can also be built as a module. If so, the module will be | |
| called imx7d_adc. | |
| config LP8788_ADC | |
| tristate "LP8788 ADC driver" | |
| depends on MFD_LP8788 | |
| help | |
| Say yes here to build support for TI LP8788 ADC. | |
| To compile this driver as a module, choose M here: the module will be | |
| called lp8788_adc. | |
| config LPC18XX_ADC | |
| tristate "NXP LPC18xx ADC driver" | |
| depends on ARCH_LPC18XX || COMPILE_TEST | |
| depends on OF && HAS_IOMEM | |
| help | |
| Say yes here to build support for NXP LPC18XX ADC. | |
| To compile this driver as a module, choose M here: the module will be | |
| called lpc18xx_adc. | |
| config LPC32XX_ADC | |
| tristate "NXP LPC32XX ADC" | |
| depends on ARCH_LPC32XX || COMPILE_TEST | |
| depends on HAS_IOMEM | |
| help | |
| Say yes here to build support for the integrated ADC inside the | |
| LPC32XX SoC. Note that this feature uses the same hardware as the | |
| touchscreen driver, so you should either select only one of the two | |
| drivers (lpc32xx_adc or lpc32xx_ts) or, in the OpenFirmware case, | |
| activate only one via device tree selection. Provides direct access | |
| via sysfs. | |
| config LTC2471 | |
| tristate "Linear Technology LTC2471 and LTC2473 ADC driver" | |
| depends on I2C | |
| help | |
| Say yes here to build support for Linear Technology LTC2471 and | |
| LTC2473 16-bit I2C ADC. | |
| This driver can also be built as a module. If so, the module will | |
| be called ltc2471. | |
| config LTC2485 | |
| tristate "Linear Technology LTC2485 ADC driver" | |
| depends on I2C | |
| help | |
| Say yes here to build support for Linear Technology LTC2485 ADC. | |
| To compile this driver as a module, choose M here: the module will be | |
| called ltc2485. | |
| config LTC2497 | |
| tristate "Linear Technology LTC2497 ADC driver" | |
| depends on I2C | |
| help | |
| Say yes here to build support for Linear Technology LTC2497 | |
| 16-Bit 8-/16-Channel Delta Sigma ADC. | |
| To compile this driver as a module, choose M here: the module will be | |
| called ltc2497. | |
| config MAX1027 | |
| tristate "Maxim max1027 ADC driver" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Maxim SPI ADC models | |
| max1027, max1029 and max1031. | |
| To compile this driver as a module, choose M here: the module will be | |
| called max1027. | |
| config MAX11100 | |
| tristate "Maxim max11100 ADC driver" | |
| depends on SPI_MASTER | |
| help | |
| Say yes here to build support for Maxim max11100 SPI ADC | |
| To compile this driver as a module, choose M here: the module will be | |
| called max11100. | |
| config MAX1118 | |
| tristate "Maxim max1117/max1118/max1119 ADCs driver" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Maxim max1117/max1118/max1119 | |
| 8-bit, dual-channel ADCs. | |
| To compile this driver as a module, choose M here: the module will be | |
| called max1118. | |
| config MAX1363 | |
| tristate "Maxim max1363 ADC driver" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for many Maxim i2c analog to digital | |
| converters (ADC). (max1361, max1362, max1363, max1364, max1036, | |
| max1037, max1038, max1039, max1136, max1136, max1137, max1138, | |
| max1139, max1236, max1237, max11238, max1239, max11600, max11601, | |
| max11602, max11603, max11604, max11605, max11606, max11607, | |
| max11608, max11609, max11610, max11611, max11612, max11613, | |
| max11614, max11615, max11616, max11617, max11644, max11645, | |
| max11646, max11647) Provides direct access via sysfs and buffered | |
| data via the iio dev interface. | |
| To compile this driver as a module, choose M here: the module will be | |
| called max1363. | |
| config MAX9611 | |
| tristate "Maxim max9611/max9612 ADC driver" | |
| depends on I2C | |
| help | |
| Say yes here to build support for Maxim max9611/max9612 current sense | |
| amplifier with 12-bits ADC interface. | |
| To compile this driver as a module, choose M here: the module will be | |
| called max9611. | |
| config MCP320X | |
| tristate "Microchip Technology MCP3x01/02/04/08" | |
| depends on SPI | |
| help | |
| Say yes here to build support for Microchip Technology's | |
| MCP3001, MCP3002, MCP3004, MCP3008, MCP3201, MCP3202, MCP3204, | |
| MCP3208 or MCP3301 analog to digital converter. | |
| This driver can also be built as a module. If so, the module will be | |
| called mcp320x. | |
| config MCP3422 | |
| tristate "Microchip Technology MCP3421/2/3/4/5/6/7/8 driver" | |
| depends on I2C | |
| help | |
| Say yes here to build support for Microchip Technology's MCP3421 | |
| MCP3422, MCP3423, MCP3424, MCP3425, MCP3426, MCP3427 or MCP3428 | |
| analog to digital converters. | |
| This driver can also be built as a module. If so, the module will be | |
| called mcp3422. | |
| config MEDIATEK_MT6577_AUXADC | |
| tristate "MediaTek AUXADC driver" | |
| depends on ARCH_MEDIATEK || COMPILE_TEST | |
| depends on HAS_IOMEM | |
| help | |
| Say yes here to enable support for MediaTek mt65xx AUXADC. | |
| The driver supports immediate mode operation to read from one of sixteen | |
| channels (external or internal). | |
| This driver can also be built as a module. If so, the module will be | |
| called mt6577_auxadc. | |
| config MEN_Z188_ADC | |
| tristate "MEN 16z188 ADC IP Core support" | |
| depends on MCB | |
| help | |
| Say yes here to enable support for the MEN 16z188 ADC IP-Core on a MCB | |
| carrier. | |
| This driver can also be built as a module. If so, the module will be | |
| called men_z188_adc. | |
| config MESON_SARADC | |
| tristate "Amlogic Meson SAR ADC driver" | |
| default ARCH_MESON | |
| depends on OF && COMMON_CLK && (ARCH_MESON || COMPILE_TEST) | |
| select REGMAP_MMIO | |
| help | |
| Say yes here to build support for the SAR ADC found in Amlogic Meson | |
| SoCs. | |
| To compile this driver as a module, choose M here: the | |
| module will be called meson_saradc. | |
| config NAU7802 | |
| tristate "Nuvoton NAU7802 ADC driver" | |
| depends on I2C | |
| help | |
| Say yes here to build support for Nuvoton NAU7802 ADC. | |
| To compile this driver as a module, choose M here: the | |
| module will be called nau7802. | |
| config PALMAS_GPADC | |
| tristate "TI Palmas General Purpose ADC" | |
| depends on MFD_PALMAS | |
| help | |
| Palmas series pmic chip by Texas Instruments (twl6035/6037) | |
| is used in smartphones and tablets and supports a 16 channel | |
| general purpose ADC. | |
| config QCOM_VADC_COMMON | |
| tristate | |
| config QCOM_PM8XXX_XOADC | |
| tristate "Qualcomm SSBI PM8xxx PMIC XOADCs" | |
| depends on MFD_PM8XXX | |
| select QCOM_VADC_COMMON | |
| help | |
| ADC driver for the XOADC portions of the Qualcomm PM8xxx PMICs | |
| using SSBI transport: PM8018, PM8038, PM8058, PM8921. | |
| To compile this driver as a module, choose M here: the module | |
| will be called qcom-pm8xxx-xoadc. | |
| config QCOM_SPMI_IADC | |
| tristate "Qualcomm SPMI PMIC current ADC" | |
| depends on SPMI | |
| select REGMAP_SPMI | |
| help | |
| This is the IIO Current ADC driver for Qualcomm QPNP IADC Chip. | |
| The driver supports single mode operation to read from one of two | |
| channels (external or internal). Hardware have additional | |
| channels internally used for gain and offset calibration. | |
| To compile this driver as a module, choose M here: the module will | |
| be called qcom-spmi-iadc. | |
| config QCOM_SPMI_VADC | |
| tristate "Qualcomm SPMI PMIC voltage ADC" | |
| depends on SPMI | |
| select REGMAP_SPMI | |
| select QCOM_VADC_COMMON | |
| help | |
| This is the IIO Voltage ADC driver for Qualcomm QPNP VADC Chip. | |
| The driver supports multiple channels read. The VADC is a 15-bit | |
| sigma-delta ADC. Some of the channels are internally used for | |
| calibration. | |
| To compile this driver as a module, choose M here: the module will | |
| be called qcom-spmi-vadc. | |
| config RCAR_GYRO_ADC | |
| tristate "Renesas R-Car GyroADC driver" | |
| depends on ARCH_RCAR_GEN2 || (ARM && COMPILE_TEST) | |
| help | |
| Say yes here to build support for the GyroADC found in Renesas | |
| R-Car Gen2 SoCs. This block is a simple SPI offload engine for | |
| reading data out of attached compatible ADCs in a round-robin | |
| fashion. Up to 4 or 8 ADC channels are supported by this block, | |
| depending on which ADCs are attached. | |
| To compile this driver as a module, choose M here: the | |
| module will be called rcar-gyroadc. | |
| config ROCKCHIP_SARADC | |
| tristate "Rockchip SARADC driver" | |
| depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST) | |
| depends on RESET_CONTROLLER | |
| help | |
| Say yes here to build support for the SARADC found in SoCs from | |
| Rockchip. | |
| To compile this driver as a module, choose M here: the | |
| module will be called rockchip_saradc. | |
| config SPEAR_ADC | |
| tristate "ST SPEAr ADC" | |
| depends on PLAT_SPEAR || COMPILE_TEST | |
| depends on HAS_IOMEM | |
| help | |
| Say yes here to build support for the integrated ADC inside the | |
| ST SPEAr SoC. Provides direct access via sysfs. | |
| To compile this driver as a module, choose M here: the | |
| module will be called spear_adc. | |
| config STM32_ADC_CORE | |
| tristate "STMicroelectronics STM32 adc core" | |
| depends on ARCH_STM32 || COMPILE_TEST | |
| depends on HAS_DMA | |
| depends on OF | |
| depends on REGULATOR | |
| select IIO_BUFFER | |
| select MFD_STM32_TIMERS | |
| select IIO_STM32_TIMER_TRIGGER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Select this option to enable the core driver for STMicroelectronics | |
| STM32 analog-to-digital converter (ADC). | |
| This driver can also be built as a module. If so, the module | |
| will be called stm32-adc-core. | |
| config STM32_ADC | |
| tristate "STMicroelectronics STM32 adc" | |
| depends on STM32_ADC_CORE | |
| help | |
| Say yes here to build support for STMicroelectronics stm32 Analog | |
| to Digital Converter (ADC). | |
| This driver can also be built as a module. If so, the module | |
| will be called stm32-adc. | |
| config STX104 | |
| tristate "Apex Embedded Systems STX104 driver" | |
| depends on PC104 && X86 && ISA_BUS_API | |
| select GPIOLIB | |
| help | |
| Say yes here to build support for the Apex Embedded Systems STX104 | |
| integrated analog PC/104 card. | |
| This driver supports the 16 channels of single-ended (8 channels of | |
| differential) analog inputs, 2 channels of analog output, 4 digital | |
| inputs, and 4 digital outputs provided by the STX104. | |
| The base port addresses for the devices may be configured via the base | |
| array module parameter. | |
| config SUN4I_GPADC | |
| tristate "Support for the Allwinner SoCs GPADC" | |
| depends on IIO | |
| depends on MFD_SUN4I_GPADC || MACH_SUN8I | |
| depends on THERMAL || !THERMAL_OF | |
| help | |
| Say yes here to build support for Allwinner (A10, A13 and A31) SoCs | |
| GPADC. This ADC provides 4 channels which can be used as an ADC or as | |
| a touchscreen input and one channel for thermal sensor. | |
| The thermal sensor slows down ADC readings and can be disabled by | |
| disabling CONFIG_THERMAL_OF. However, the thermal sensor should be | |
| enabled by default since the SoC temperature is usually more critical | |
| than ADC readings. | |
| To compile this driver as a module, choose M here: the module will be | |
| called sun4i-gpadc-iio. | |
| config TI_ADC081C | |
| tristate "Texas Instruments ADC081C/ADC101C/ADC121C family" | |
| depends on I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| If you say yes here you get support for Texas Instruments ADC081C, | |
| ADC101C and ADC121C ADC chips. | |
| This driver can also be built as a module. If so, the module will be | |
| called ti-adc081c. | |
| config TI_ADC0832 | |
| tristate "Texas Instruments ADC0831/ADC0832/ADC0834/ADC0838" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| If you say yes here you get support for Texas Instruments ADC0831, | |
| ADC0832, ADC0834, ADC0838 ADC chips. | |
| This driver can also be built as a module. If so, the module will be | |
| called ti-adc0832. | |
| config TI_ADC084S021 | |
| tristate "Texas Instruments ADC084S021" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| If you say yes here you get support for Texas Instruments ADC084S021 | |
| chips. | |
| This driver can also be built as a module. If so, the module will be | |
| called ti-adc084s021. | |
| config TI_ADC12138 | |
| tristate "Texas Instruments ADC12130/ADC12132/ADC12138" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| If you say yes here you get support for Texas Instruments ADC12130, | |
| ADC12132 and ADC12138 chips. | |
| This driver can also be built as a module. If so, the module will be | |
| called ti-adc12138. | |
| config TI_ADC108S102 | |
| tristate "Texas Instruments ADC108S102 and ADC128S102 driver" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Texas Instruments ADC108S102 and | |
| ADC128S102 ADC. | |
| To compile this driver as a module, choose M here: the module will | |
| be called ti-adc108s102. | |
| config TI_ADC128S052 | |
| tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021" | |
| depends on SPI | |
| help | |
| If you say yes here you get support for Texas Instruments ADC128S052, | |
| ADC122S021 and ADC124S021 chips. | |
| This driver can also be built as a module. If so, the module will be | |
| called ti-adc128s052. | |
| config TI_ADC161S626 | |
| tristate "Texas Instruments ADC161S626 1-channel differential ADC" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| If you say yes here you get support for Texas Instruments ADC141S626, | |
| and ADC161S626 chips. | |
| This driver can also be built as a module. If so, the module will be | |
| called ti-adc161s626. | |
| config TI_ADS1015 | |
| tristate "Texas Instruments ADS1015 ADC" | |
| depends on I2C && !SENSORS_ADS1015 | |
| select REGMAP_I2C | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| If you say yes here you get support for Texas Instruments ADS1015 | |
| ADC chip. | |
| This driver can also be built as a module. If so, the module will be | |
| called ti-ads1015. | |
| config TI_ADS7950 | |
| tristate "Texas Instruments ADS7950 ADC driver" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Texas Instruments ADS7950, ADS7951, | |
| ADS7952, ADS7953, ADS7954, ADS7955, ADS7956, ADS7957, ADS7958, ADS7959. | |
| ADS7960, ADS7961. | |
| To compile this driver as a module, choose M here: the | |
| module will be called ti-ads7950. | |
| config TI_ADS8688 | |
| tristate "Texas Instruments ADS8688" | |
| depends on SPI && OF | |
| help | |
| If you say yes here you get support for Texas Instruments ADS8684 and | |
| and ADS8688 ADC chips | |
| This driver can also be built as a module. If so, the module will be | |
| called ti-ads8688. | |
| config TI_AM335X_ADC | |
| tristate "TI's AM335X ADC driver" | |
| depends on MFD_TI_AM335X_TSCADC && HAS_DMA | |
| select IIO_BUFFER | |
| select IIO_KFIFO_BUF | |
| help | |
| Say yes here to build support for Texas Instruments ADC | |
| driver which is also a MFD client. | |
| To compile this driver as a module, choose M here: the module will be | |
| called ti_am335x_adc. | |
| config TI_TLC4541 | |
| tristate "Texas Instruments TLC4541 ADC driver" | |
| depends on SPI | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to build support for Texas Instruments TLC4541 / TLC3541 | |
| ADC chips. | |
| This driver can also be built as a module. If so, the module will be | |
| called ti-tlc4541. | |
| config TWL4030_MADC | |
| tristate "TWL4030 MADC (Monitoring A/D Converter)" | |
| depends on TWL4030_CORE | |
| help | |
| This driver provides support for Triton TWL4030-MADC. The | |
| driver supports both RT and SW conversion methods. | |
| This driver can also be built as a module. If so, the module will be | |
| called twl4030-madc. | |
| config TWL6030_GPADC | |
| tristate "TWL6030 GPADC (General Purpose A/D Converter) Support" | |
| depends on TWL4030_CORE | |
| default n | |
| help | |
| Say yes here if you want support for the TWL6030/TWL6032 General | |
| Purpose A/D Converter. This will add support for battery type | |
| detection, battery voltage and temperature measurement, die | |
| temperature measurement, system supply voltage, audio accessory, | |
| USB ID detection. | |
| This driver can also be built as a module. If so, the module will be | |
| called twl6030-gpadc. | |
| config VF610_ADC | |
| tristate "Freescale vf610 ADC driver" | |
| depends on OF | |
| depends on HAS_IOMEM | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to support for Vybrid board analog-to-digital converter. | |
| Since the IP is used for i.MX6SLX, the driver also support i.MX6SLX. | |
| This driver can also be built as a module. If so, the module will be | |
| called vf610_adc. | |
| config VIPERBOARD_ADC | |
| tristate "Viperboard ADC support" | |
| depends on MFD_VIPERBOARD && USB | |
| help | |
| Say yes here to access the ADC part of the Nano River | |
| Technologies Viperboard. | |
| To compile this driver as a module, choose M here: the module will be | |
| called viperboard_adc. | |
| config XILINX_XADC | |
| tristate "Xilinx XADC driver" | |
| depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST | |
| depends on HAS_IOMEM | |
| select IIO_BUFFER | |
| select IIO_TRIGGERED_BUFFER | |
| help | |
| Say yes here to have support for the Xilinx XADC. The driver does support | |
| both the ZYNQ interface to the XADC as well as the AXI-XADC interface. | |
| The driver can also be build as a module. If so, the module will be called | |
| xilinx-xadc. | |
| endmenu |