| /* |
| * core.c -- Voltage/Current Regulator framework. |
| * |
| * Copyright 2007, 2008 Wolfson Microelectronics PLC. |
| * Copyright 2008 SlimLogic Ltd. |
| * |
| * Author: Liam Girdwood <lrg@slimlogic.co.uk> |
| * |
| * This program is free software; you can redistribute it and/or modify it |
| * under the terms of the GNU General Public License as published by the |
| * Free Software Foundation; either version 2 of the License, or (at your |
| * option) any later version. |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/init.h> |
| #include <linux/debugfs.h> |
| #include <linux/device.h> |
| #include <linux/slab.h> |
| #include <linux/async.h> |
| #include <linux/err.h> |
| #include <linux/mutex.h> |
| #include <linux/suspend.h> |
| #include <linux/delay.h> |
| #include <linux/gpio.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/of.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/of_regulator.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/regulator/driver.h> |
| #include <linux/regulator/machine.h> |
| #include <linux/module.h> |
| |
| #define CREATE_TRACE_POINTS |
| #include <trace/events/regulator.h> |
| |
| #include "dummy.h" |
| #include "internal.h" |
| |
| #define rdev_crit(rdev, fmt, ...) \ |
| pr_crit("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) |
| #define rdev_err(rdev, fmt, ...) \ |
| pr_err("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) |
| #define rdev_warn(rdev, fmt, ...) \ |
| pr_warn("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) |
| #define rdev_info(rdev, fmt, ...) \ |
| pr_info("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) |
| #define rdev_dbg(rdev, fmt, ...) \ |
| pr_debug("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__) |
| |
| static DEFINE_MUTEX(regulator_list_mutex); |
| static LIST_HEAD(regulator_map_list); |
| static LIST_HEAD(regulator_ena_gpio_list); |
| static LIST_HEAD(regulator_supply_alias_list); |
| static bool has_full_constraints; |
| |
| static struct dentry *debugfs_root; |
| |
| static struct class regulator_class; |
| |
| /* |
| * struct regulator_map |
| * |
| * Used to provide symbolic supply names to devices. |
| */ |
| struct regulator_map { |
| struct list_head list; |
| const char *dev_name; /* The dev_name() for the consumer */ |
| const char *supply; |
| struct regulator_dev *regulator; |
| }; |
| |
| /* |
| * struct regulator_enable_gpio |
| * |
| * Management for shared enable GPIO pin |
| */ |
| struct regulator_enable_gpio { |
| struct list_head list; |
| struct gpio_desc *gpiod; |
| u32 enable_count; /* a number of enabled shared GPIO */ |
| u32 request_count; /* a number of requested shared GPIO */ |
| unsigned int ena_gpio_invert:1; |
| }; |
| |
| /* |
| * struct regulator_supply_alias |
| * |
| * Used to map lookups for a supply onto an alternative device. |
| */ |
| struct regulator_supply_alias { |
| struct list_head list; |
| struct device *src_dev; |
| const char *src_supply; |
| struct device *alias_dev; |
| const char *alias_supply; |
| }; |
| |
| static int _regulator_is_enabled(struct regulator_dev *rdev); |
| static int _regulator_disable(struct regulator_dev *rdev); |
| static int _regulator_get_voltage(struct regulator_dev *rdev); |
| static int _regulator_get_current_limit(struct regulator_dev *rdev); |
| static unsigned int _regulator_get_mode(struct regulator_dev *rdev); |
| static int _notifier_call_chain(struct regulator_dev *rdev, |
| unsigned long event, void *data); |
| static int _regulator_do_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV); |
| static struct regulator *create_regulator(struct regulator_dev *rdev, |
| struct device *dev, |
| const char *supply_name); |
| static void _regulator_put(struct regulator *regulator); |
| |
| static struct regulator_dev *dev_to_rdev(struct device *dev) |
| { |
| return container_of(dev, struct regulator_dev, dev); |
| } |
| |
| static const char *rdev_get_name(struct regulator_dev *rdev) |
| { |
| if (rdev->constraints && rdev->constraints->name) |
| return rdev->constraints->name; |
| else if (rdev->desc->name) |
| return rdev->desc->name; |
| else |
| return ""; |
| } |
| |
| static bool have_full_constraints(void) |
| { |
| return has_full_constraints || of_have_populated_dt(); |
| } |
| |
| static bool regulator_ops_is_valid(struct regulator_dev *rdev, int ops) |
| { |
| if (!rdev->constraints) { |
| rdev_err(rdev, "no constraints\n"); |
| return false; |
| } |
| |
| if (rdev->constraints->valid_ops_mask & ops) |
| return true; |
| |
| return false; |
| } |
| |
| static inline struct regulator_dev *rdev_get_supply(struct regulator_dev *rdev) |
| { |
| if (rdev && rdev->supply) |
| return rdev->supply->rdev; |
| |
| return NULL; |
| } |
| |
| /** |
| * regulator_lock_supply - lock a regulator and its supplies |
| * @rdev: regulator source |
| */ |
| static void regulator_lock_supply(struct regulator_dev *rdev) |
| { |
| int i; |
| |
| for (i = 0; rdev; rdev = rdev_get_supply(rdev), i++) |
| mutex_lock_nested(&rdev->mutex, i); |
| } |
| |
| /** |
| * regulator_unlock_supply - unlock a regulator and its supplies |
| * @rdev: regulator source |
| */ |
| static void regulator_unlock_supply(struct regulator_dev *rdev) |
| { |
| struct regulator *supply; |
| |
| while (1) { |
| mutex_unlock(&rdev->mutex); |
| supply = rdev->supply; |
| |
| if (!rdev->supply) |
| return; |
| |
| rdev = supply->rdev; |
| } |
| } |
| |
| /** |
| * of_get_regulator - get a regulator device node based on supply name |
| * @dev: Device pointer for the consumer (of regulator) device |
| * @supply: regulator supply name |
| * |
| * Extract the regulator device node corresponding to the supply name. |
| * returns the device node corresponding to the regulator if found, else |
| * returns NULL. |
| */ |
| static struct device_node *of_get_regulator(struct device *dev, const char *supply) |
| { |
| struct device_node *regnode = NULL; |
| char prop_name[32]; /* 32 is max size of property name */ |
| |
| dev_dbg(dev, "Looking up %s-supply from device tree\n", supply); |
| |
| snprintf(prop_name, 32, "%s-supply", supply); |
| regnode = of_parse_phandle(dev->of_node, prop_name, 0); |
| |
| if (!regnode) { |
| dev_dbg(dev, "Looking up %s property in node %pOF failed\n", |
| prop_name, dev->of_node); |
| return NULL; |
| } |
| return regnode; |
| } |
| |
| /* Platform voltage constraint check */ |
| static int regulator_check_voltage(struct regulator_dev *rdev, |
| int *min_uV, int *max_uV) |
| { |
| BUG_ON(*min_uV > *max_uV); |
| |
| if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) { |
| rdev_err(rdev, "voltage operation not allowed\n"); |
| return -EPERM; |
| } |
| |
| if (*max_uV > rdev->constraints->max_uV) |
| *max_uV = rdev->constraints->max_uV; |
| if (*min_uV < rdev->constraints->min_uV) |
| *min_uV = rdev->constraints->min_uV; |
| |
| if (*min_uV > *max_uV) { |
| rdev_err(rdev, "unsupportable voltage range: %d-%duV\n", |
| *min_uV, *max_uV); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* Make sure we select a voltage that suits the needs of all |
| * regulator consumers |
| */ |
| static int regulator_check_consumers(struct regulator_dev *rdev, |
| int *min_uV, int *max_uV) |
| { |
| struct regulator *regulator; |
| |
| list_for_each_entry(regulator, &rdev->consumer_list, list) { |
| /* |
| * Assume consumers that didn't say anything are OK |
| * with anything in the constraint range. |
| */ |
| if (!regulator->min_uV && !regulator->max_uV) |
| continue; |
| |
| if (*max_uV > regulator->max_uV) |
| *max_uV = regulator->max_uV; |
| if (*min_uV < regulator->min_uV) |
| *min_uV = regulator->min_uV; |
| } |
| |
| if (*min_uV > *max_uV) { |
| rdev_err(rdev, "Restricting voltage, %u-%uuV\n", |
| *min_uV, *max_uV); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* current constraint check */ |
| static int regulator_check_current_limit(struct regulator_dev *rdev, |
| int *min_uA, int *max_uA) |
| { |
| BUG_ON(*min_uA > *max_uA); |
| |
| if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_CURRENT)) { |
| rdev_err(rdev, "current operation not allowed\n"); |
| return -EPERM; |
| } |
| |
| if (*max_uA > rdev->constraints->max_uA) |
| *max_uA = rdev->constraints->max_uA; |
| if (*min_uA < rdev->constraints->min_uA) |
| *min_uA = rdev->constraints->min_uA; |
| |
| if (*min_uA > *max_uA) { |
| rdev_err(rdev, "unsupportable current range: %d-%duA\n", |
| *min_uA, *max_uA); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| /* operating mode constraint check */ |
| static int regulator_mode_constrain(struct regulator_dev *rdev, |
| unsigned int *mode) |
| { |
| switch (*mode) { |
| case REGULATOR_MODE_FAST: |
| case REGULATOR_MODE_NORMAL: |
| case REGULATOR_MODE_IDLE: |
| case REGULATOR_MODE_STANDBY: |
| break; |
| default: |
| rdev_err(rdev, "invalid mode %x specified\n", *mode); |
| return -EINVAL; |
| } |
| |
| if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_MODE)) { |
| rdev_err(rdev, "mode operation not allowed\n"); |
| return -EPERM; |
| } |
| |
| /* The modes are bitmasks, the most power hungry modes having |
| * the lowest values. If the requested mode isn't supported |
| * try higher modes. */ |
| while (*mode) { |
| if (rdev->constraints->valid_modes_mask & *mode) |
| return 0; |
| *mode /= 2; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static ssize_t regulator_uV_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| ssize_t ret; |
| |
| mutex_lock(&rdev->mutex); |
| ret = sprintf(buf, "%d\n", _regulator_get_voltage(rdev)); |
| mutex_unlock(&rdev->mutex); |
| |
| return ret; |
| } |
| static DEVICE_ATTR(microvolts, 0444, regulator_uV_show, NULL); |
| |
| static ssize_t regulator_uA_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", _regulator_get_current_limit(rdev)); |
| } |
| static DEVICE_ATTR(microamps, 0444, regulator_uA_show, NULL); |
| |
| static ssize_t name_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%s\n", rdev_get_name(rdev)); |
| } |
| static DEVICE_ATTR_RO(name); |
| |
| static ssize_t regulator_print_opmode(char *buf, int mode) |
| { |
| switch (mode) { |
| case REGULATOR_MODE_FAST: |
| return sprintf(buf, "fast\n"); |
| case REGULATOR_MODE_NORMAL: |
| return sprintf(buf, "normal\n"); |
| case REGULATOR_MODE_IDLE: |
| return sprintf(buf, "idle\n"); |
| case REGULATOR_MODE_STANDBY: |
| return sprintf(buf, "standby\n"); |
| } |
| return sprintf(buf, "unknown\n"); |
| } |
| |
| static ssize_t regulator_opmode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| return regulator_print_opmode(buf, _regulator_get_mode(rdev)); |
| } |
| static DEVICE_ATTR(opmode, 0444, regulator_opmode_show, NULL); |
| |
| static ssize_t regulator_print_state(char *buf, int state) |
| { |
| if (state > 0) |
| return sprintf(buf, "enabled\n"); |
| else if (state == 0) |
| return sprintf(buf, "disabled\n"); |
| else |
| return sprintf(buf, "unknown\n"); |
| } |
| |
| static ssize_t regulator_state_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| ssize_t ret; |
| |
| mutex_lock(&rdev->mutex); |
| ret = regulator_print_state(buf, _regulator_is_enabled(rdev)); |
| mutex_unlock(&rdev->mutex); |
| |
| return ret; |
| } |
| static DEVICE_ATTR(state, 0444, regulator_state_show, NULL); |
| |
| static ssize_t regulator_status_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| int status; |
| char *label; |
| |
| status = rdev->desc->ops->get_status(rdev); |
| if (status < 0) |
| return status; |
| |
| switch (status) { |
| case REGULATOR_STATUS_OFF: |
| label = "off"; |
| break; |
| case REGULATOR_STATUS_ON: |
| label = "on"; |
| break; |
| case REGULATOR_STATUS_ERROR: |
| label = "error"; |
| break; |
| case REGULATOR_STATUS_FAST: |
| label = "fast"; |
| break; |
| case REGULATOR_STATUS_NORMAL: |
| label = "normal"; |
| break; |
| case REGULATOR_STATUS_IDLE: |
| label = "idle"; |
| break; |
| case REGULATOR_STATUS_STANDBY: |
| label = "standby"; |
| break; |
| case REGULATOR_STATUS_BYPASS: |
| label = "bypass"; |
| break; |
| case REGULATOR_STATUS_UNDEFINED: |
| label = "undefined"; |
| break; |
| default: |
| return -ERANGE; |
| } |
| |
| return sprintf(buf, "%s\n", label); |
| } |
| static DEVICE_ATTR(status, 0444, regulator_status_show, NULL); |
| |
| static ssize_t regulator_min_uA_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| if (!rdev->constraints) |
| return sprintf(buf, "constraint not defined\n"); |
| |
| return sprintf(buf, "%d\n", rdev->constraints->min_uA); |
| } |
| static DEVICE_ATTR(min_microamps, 0444, regulator_min_uA_show, NULL); |
| |
| static ssize_t regulator_max_uA_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| if (!rdev->constraints) |
| return sprintf(buf, "constraint not defined\n"); |
| |
| return sprintf(buf, "%d\n", rdev->constraints->max_uA); |
| } |
| static DEVICE_ATTR(max_microamps, 0444, regulator_max_uA_show, NULL); |
| |
| static ssize_t regulator_min_uV_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| if (!rdev->constraints) |
| return sprintf(buf, "constraint not defined\n"); |
| |
| return sprintf(buf, "%d\n", rdev->constraints->min_uV); |
| } |
| static DEVICE_ATTR(min_microvolts, 0444, regulator_min_uV_show, NULL); |
| |
| static ssize_t regulator_max_uV_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| if (!rdev->constraints) |
| return sprintf(buf, "constraint not defined\n"); |
| |
| return sprintf(buf, "%d\n", rdev->constraints->max_uV); |
| } |
| static DEVICE_ATTR(max_microvolts, 0444, regulator_max_uV_show, NULL); |
| |
| static ssize_t regulator_total_uA_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| struct regulator *regulator; |
| int uA = 0; |
| |
| mutex_lock(&rdev->mutex); |
| list_for_each_entry(regulator, &rdev->consumer_list, list) |
| uA += regulator->uA_load; |
| mutex_unlock(&rdev->mutex); |
| return sprintf(buf, "%d\n", uA); |
| } |
| static DEVICE_ATTR(requested_microamps, 0444, regulator_total_uA_show, NULL); |
| |
| static ssize_t num_users_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| return sprintf(buf, "%d\n", rdev->use_count); |
| } |
| static DEVICE_ATTR_RO(num_users); |
| |
| static ssize_t type_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| switch (rdev->desc->type) { |
| case REGULATOR_VOLTAGE: |
| return sprintf(buf, "voltage\n"); |
| case REGULATOR_CURRENT: |
| return sprintf(buf, "current\n"); |
| } |
| return sprintf(buf, "unknown\n"); |
| } |
| static DEVICE_ATTR_RO(type); |
| |
| static ssize_t regulator_suspend_mem_uV_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", rdev->constraints->state_mem.uV); |
| } |
| static DEVICE_ATTR(suspend_mem_microvolts, 0444, |
| regulator_suspend_mem_uV_show, NULL); |
| |
| static ssize_t regulator_suspend_disk_uV_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", rdev->constraints->state_disk.uV); |
| } |
| static DEVICE_ATTR(suspend_disk_microvolts, 0444, |
| regulator_suspend_disk_uV_show, NULL); |
| |
| static ssize_t regulator_suspend_standby_uV_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV); |
| } |
| static DEVICE_ATTR(suspend_standby_microvolts, 0444, |
| regulator_suspend_standby_uV_show, NULL); |
| |
| static ssize_t regulator_suspend_mem_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| return regulator_print_opmode(buf, |
| rdev->constraints->state_mem.mode); |
| } |
| static DEVICE_ATTR(suspend_mem_mode, 0444, |
| regulator_suspend_mem_mode_show, NULL); |
| |
| static ssize_t regulator_suspend_disk_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| return regulator_print_opmode(buf, |
| rdev->constraints->state_disk.mode); |
| } |
| static DEVICE_ATTR(suspend_disk_mode, 0444, |
| regulator_suspend_disk_mode_show, NULL); |
| |
| static ssize_t regulator_suspend_standby_mode_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| return regulator_print_opmode(buf, |
| rdev->constraints->state_standby.mode); |
| } |
| static DEVICE_ATTR(suspend_standby_mode, 0444, |
| regulator_suspend_standby_mode_show, NULL); |
| |
| static ssize_t regulator_suspend_mem_state_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| return regulator_print_state(buf, |
| rdev->constraints->state_mem.enabled); |
| } |
| static DEVICE_ATTR(suspend_mem_state, 0444, |
| regulator_suspend_mem_state_show, NULL); |
| |
| static ssize_t regulator_suspend_disk_state_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| return regulator_print_state(buf, |
| rdev->constraints->state_disk.enabled); |
| } |
| static DEVICE_ATTR(suspend_disk_state, 0444, |
| regulator_suspend_disk_state_show, NULL); |
| |
| static ssize_t regulator_suspend_standby_state_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| |
| return regulator_print_state(buf, |
| rdev->constraints->state_standby.enabled); |
| } |
| static DEVICE_ATTR(suspend_standby_state, 0444, |
| regulator_suspend_standby_state_show, NULL); |
| |
| static ssize_t regulator_bypass_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| struct regulator_dev *rdev = dev_get_drvdata(dev); |
| const char *report; |
| bool bypass; |
| int ret; |
| |
| ret = rdev->desc->ops->get_bypass(rdev, &bypass); |
| |
| if (ret != 0) |
| report = "unknown"; |
| else if (bypass) |
| report = "enabled"; |
| else |
| report = "disabled"; |
| |
| return sprintf(buf, "%s\n", report); |
| } |
| static DEVICE_ATTR(bypass, 0444, |
| regulator_bypass_show, NULL); |
| |
| /* Calculate the new optimum regulator operating mode based on the new total |
| * consumer load. All locks held by caller */ |
| static int drms_uA_update(struct regulator_dev *rdev) |
| { |
| struct regulator *sibling; |
| int current_uA = 0, output_uV, input_uV, err; |
| unsigned int mode; |
| |
| lockdep_assert_held_once(&rdev->mutex); |
| |
| /* |
| * first check to see if we can set modes at all, otherwise just |
| * tell the consumer everything is OK. |
| */ |
| if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS)) |
| return 0; |
| |
| if (!rdev->desc->ops->get_optimum_mode && |
| !rdev->desc->ops->set_load) |
| return 0; |
| |
| if (!rdev->desc->ops->set_mode && |
| !rdev->desc->ops->set_load) |
| return -EINVAL; |
| |
| /* calc total requested load */ |
| list_for_each_entry(sibling, &rdev->consumer_list, list) |
| current_uA += sibling->uA_load; |
| |
| current_uA += rdev->constraints->system_load; |
| |
| if (rdev->desc->ops->set_load) { |
| /* set the optimum mode for our new total regulator load */ |
| err = rdev->desc->ops->set_load(rdev, current_uA); |
| if (err < 0) |
| rdev_err(rdev, "failed to set load %d\n", current_uA); |
| } else { |
| /* get output voltage */ |
| output_uV = _regulator_get_voltage(rdev); |
| if (output_uV <= 0) { |
| rdev_err(rdev, "invalid output voltage found\n"); |
| return -EINVAL; |
| } |
| |
| /* get input voltage */ |
| input_uV = 0; |
| if (rdev->supply) |
| input_uV = regulator_get_voltage(rdev->supply); |
| if (input_uV <= 0) |
| input_uV = rdev->constraints->input_uV; |
| if (input_uV <= 0) { |
| rdev_err(rdev, "invalid input voltage found\n"); |
| return -EINVAL; |
| } |
| |
| /* now get the optimum mode for our new total regulator load */ |
| mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV, |
| output_uV, current_uA); |
| |
| /* check the new mode is allowed */ |
| err = regulator_mode_constrain(rdev, &mode); |
| if (err < 0) { |
| rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n", |
| current_uA, input_uV, output_uV); |
| return err; |
| } |
| |
| err = rdev->desc->ops->set_mode(rdev, mode); |
| if (err < 0) |
| rdev_err(rdev, "failed to set optimum mode %x\n", mode); |
| } |
| |
| return err; |
| } |
| |
| static int suspend_set_state(struct regulator_dev *rdev, |
| struct regulator_state *rstate) |
| { |
| int ret = 0; |
| |
| /* If we have no suspend mode configration don't set anything; |
| * only warn if the driver implements set_suspend_voltage or |
| * set_suspend_mode callback. |
| */ |
| if (!rstate->enabled && !rstate->disabled) { |
| if (rdev->desc->ops->set_suspend_voltage || |
| rdev->desc->ops->set_suspend_mode) |
| rdev_warn(rdev, "No configuration\n"); |
| return 0; |
| } |
| |
| if (rstate->enabled && rstate->disabled) { |
| rdev_err(rdev, "invalid configuration\n"); |
| return -EINVAL; |
| } |
| |
| if (rstate->enabled && rdev->desc->ops->set_suspend_enable) |
| ret = rdev->desc->ops->set_suspend_enable(rdev); |
| else if (rstate->disabled && rdev->desc->ops->set_suspend_disable) |
| ret = rdev->desc->ops->set_suspend_disable(rdev); |
| else /* OK if set_suspend_enable or set_suspend_disable is NULL */ |
| ret = 0; |
| |
| if (ret < 0) { |
| rdev_err(rdev, "failed to enabled/disable\n"); |
| return ret; |
| } |
| |
| if (rdev->desc->ops->set_suspend_voltage && rstate->uV > 0) { |
| ret = rdev->desc->ops->set_suspend_voltage(rdev, rstate->uV); |
| if (ret < 0) { |
| rdev_err(rdev, "failed to set voltage\n"); |
| return ret; |
| } |
| } |
| |
| if (rdev->desc->ops->set_suspend_mode && rstate->mode > 0) { |
| ret = rdev->desc->ops->set_suspend_mode(rdev, rstate->mode); |
| if (ret < 0) { |
| rdev_err(rdev, "failed to set mode\n"); |
| return ret; |
| } |
| } |
| return ret; |
| } |
| |
| /* locks held by caller */ |
| static int suspend_prepare(struct regulator_dev *rdev, suspend_state_t state) |
| { |
| if (!rdev->constraints) |
| return -EINVAL; |
| |
| switch (state) { |
| case PM_SUSPEND_STANDBY: |
| return suspend_set_state(rdev, |
| &rdev->constraints->state_standby); |
| case PM_SUSPEND_MEM: |
| return suspend_set_state(rdev, |
| &rdev->constraints->state_mem); |
| case PM_SUSPEND_MAX: |
| return suspend_set_state(rdev, |
| &rdev->constraints->state_disk); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static void print_constraints(struct regulator_dev *rdev) |
| { |
| struct regulation_constraints *constraints = rdev->constraints; |
| char buf[160] = ""; |
| size_t len = sizeof(buf) - 1; |
| int count = 0; |
| int ret; |
| |
| if (constraints->min_uV && constraints->max_uV) { |
| if (constraints->min_uV == constraints->max_uV) |
| count += scnprintf(buf + count, len - count, "%d mV ", |
| constraints->min_uV / 1000); |
| else |
| count += scnprintf(buf + count, len - count, |
| "%d <--> %d mV ", |
| constraints->min_uV / 1000, |
| constraints->max_uV / 1000); |
| } |
| |
| if (!constraints->min_uV || |
| constraints->min_uV != constraints->max_uV) { |
| ret = _regulator_get_voltage(rdev); |
| if (ret > 0) |
| count += scnprintf(buf + count, len - count, |
| "at %d mV ", ret / 1000); |
| } |
| |
| if (constraints->uV_offset) |
| count += scnprintf(buf + count, len - count, "%dmV offset ", |
| constraints->uV_offset / 1000); |
| |
| if (constraints->min_uA && constraints->max_uA) { |
| if (constraints->min_uA == constraints->max_uA) |
| count += scnprintf(buf + count, len - count, "%d mA ", |
| constraints->min_uA / 1000); |
| else |
| count += scnprintf(buf + count, len - count, |
| "%d <--> %d mA ", |
| constraints->min_uA / 1000, |
| constraints->max_uA / 1000); |
| } |
| |
| if (!constraints->min_uA || |
| constraints->min_uA != constraints->max_uA) { |
| ret = _regulator_get_current_limit(rdev); |
| if (ret > 0) |
| count += scnprintf(buf + count, len - count, |
| "at %d mA ", ret / 1000); |
| } |
| |
| if (constraints->valid_modes_mask & REGULATOR_MODE_FAST) |
| count += scnprintf(buf + count, len - count, "fast "); |
| if (constraints->valid_modes_mask & REGULATOR_MODE_NORMAL) |
| count += scnprintf(buf + count, len - count, "normal "); |
| if (constraints->valid_modes_mask & REGULATOR_MODE_IDLE) |
| count += scnprintf(buf + count, len - count, "idle "); |
| if (constraints->valid_modes_mask & REGULATOR_MODE_STANDBY) |
| count += scnprintf(buf + count, len - count, "standby"); |
| |
| if (!count) |
| scnprintf(buf, len, "no parameters"); |
| |
| rdev_dbg(rdev, "%s\n", buf); |
| |
| if ((constraints->min_uV != constraints->max_uV) && |
| !regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) |
| rdev_warn(rdev, |
| "Voltage range but no REGULATOR_CHANGE_VOLTAGE\n"); |
| } |
| |
| static int machine_constraints_voltage(struct regulator_dev *rdev, |
| struct regulation_constraints *constraints) |
| { |
| const struct regulator_ops *ops = rdev->desc->ops; |
| int ret; |
| |
| /* do we need to apply the constraint voltage */ |
| if (rdev->constraints->apply_uV && |
| rdev->constraints->min_uV && rdev->constraints->max_uV) { |
| int target_min, target_max; |
| int current_uV = _regulator_get_voltage(rdev); |
| if (current_uV < 0) { |
| rdev_err(rdev, |
| "failed to get the current voltage(%d)\n", |
| current_uV); |
| return current_uV; |
| } |
| |
| /* |
| * If we're below the minimum voltage move up to the |
| * minimum voltage, if we're above the maximum voltage |
| * then move down to the maximum. |
| */ |
| target_min = current_uV; |
| target_max = current_uV; |
| |
| if (current_uV < rdev->constraints->min_uV) { |
| target_min = rdev->constraints->min_uV; |
| target_max = rdev->constraints->min_uV; |
| } |
| |
| if (current_uV > rdev->constraints->max_uV) { |
| target_min = rdev->constraints->max_uV; |
| target_max = rdev->constraints->max_uV; |
| } |
| |
| if (target_min != current_uV || target_max != current_uV) { |
| rdev_info(rdev, "Bringing %duV into %d-%duV\n", |
| current_uV, target_min, target_max); |
| ret = _regulator_do_set_voltage( |
| rdev, target_min, target_max); |
| if (ret < 0) { |
| rdev_err(rdev, |
| "failed to apply %d-%duV constraint(%d)\n", |
| target_min, target_max, ret); |
| return ret; |
| } |
| } |
| } |
| |
| /* constrain machine-level voltage specs to fit |
| * the actual range supported by this regulator. |
| */ |
| if (ops->list_voltage && rdev->desc->n_voltages) { |
| int count = rdev->desc->n_voltages; |
| int i; |
| int min_uV = INT_MAX; |
| int max_uV = INT_MIN; |
| int cmin = constraints->min_uV; |
| int cmax = constraints->max_uV; |
| |
| /* it's safe to autoconfigure fixed-voltage supplies |
| and the constraints are used by list_voltage. */ |
| if (count == 1 && !cmin) { |
| cmin = 1; |
| cmax = INT_MAX; |
| constraints->min_uV = cmin; |
| constraints->max_uV = cmax; |
| } |
| |
| /* voltage constraints are optional */ |
| if ((cmin == 0) && (cmax == 0)) |
| return 0; |
| |
| /* else require explicit machine-level constraints */ |
| if (cmin <= 0 || cmax <= 0 || cmax < cmin) { |
| rdev_err(rdev, "invalid voltage constraints\n"); |
| return -EINVAL; |
| } |
| |
| /* initial: [cmin..cmax] valid, [min_uV..max_uV] not */ |
| for (i = 0; i < count; i++) { |
| int value; |
| |
| value = ops->list_voltage(rdev, i); |
| if (value <= 0) |
| continue; |
| |
| /* maybe adjust [min_uV..max_uV] */ |
| if (value >= cmin && value < min_uV) |
| min_uV = value; |
| if (value <= cmax && value > max_uV) |
| max_uV = value; |
| } |
| |
| /* final: [min_uV..max_uV] valid iff constraints valid */ |
| if (max_uV < min_uV) { |
| rdev_err(rdev, |
| "unsupportable voltage constraints %u-%uuV\n", |
| min_uV, max_uV); |
| return -EINVAL; |
| } |
| |
| /* use regulator's subset of machine constraints */ |
| if (constraints->min_uV < min_uV) { |
| rdev_dbg(rdev, "override min_uV, %d -> %d\n", |
| constraints->min_uV, min_uV); |
| constraints->min_uV = min_uV; |
| } |
| if (constraints->max_uV > max_uV) { |
| rdev_dbg(rdev, "override max_uV, %d -> %d\n", |
| constraints->max_uV, max_uV); |
| constraints->max_uV = max_uV; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int machine_constraints_current(struct regulator_dev *rdev, |
| struct regulation_constraints *constraints) |
| { |
| const struct regulator_ops *ops = rdev->desc->ops; |
| int ret; |
| |
| if (!constraints->min_uA && !constraints->max_uA) |
| return 0; |
| |
| if (constraints->min_uA > constraints->max_uA) { |
| rdev_err(rdev, "Invalid current constraints\n"); |
| return -EINVAL; |
| } |
| |
| if (!ops->set_current_limit || !ops->get_current_limit) { |
| rdev_warn(rdev, "Operation of current configuration missing\n"); |
| return 0; |
| } |
| |
| /* Set regulator current in constraints range */ |
| ret = ops->set_current_limit(rdev, constraints->min_uA, |
| constraints->max_uA); |
| if (ret < 0) { |
| rdev_err(rdev, "Failed to set current constraint, %d\n", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int _regulator_do_enable(struct regulator_dev *rdev); |
| |
| /** |
| * set_machine_constraints - sets regulator constraints |
| * @rdev: regulator source |
| * @constraints: constraints to apply |
| * |
| * Allows platform initialisation code to define and constrain |
| * regulator circuits e.g. valid voltage/current ranges, etc. NOTE: |
| * Constraints *must* be set by platform code in order for some |
| * regulator operations to proceed i.e. set_voltage, set_current_limit, |
| * set_mode. |
| */ |
| static int set_machine_constraints(struct regulator_dev *rdev, |
| const struct regulation_constraints *constraints) |
| { |
| int ret = 0; |
| const struct regulator_ops *ops = rdev->desc->ops; |
| |
| if (constraints) |
| rdev->constraints = kmemdup(constraints, sizeof(*constraints), |
| GFP_KERNEL); |
| else |
| rdev->constraints = kzalloc(sizeof(*constraints), |
| GFP_KERNEL); |
| if (!rdev->constraints) |
| return -ENOMEM; |
| |
| ret = machine_constraints_voltage(rdev, rdev->constraints); |
| if (ret != 0) |
| return ret; |
| |
| ret = machine_constraints_current(rdev, rdev->constraints); |
| if (ret != 0) |
| return ret; |
| |
| if (rdev->constraints->ilim_uA && ops->set_input_current_limit) { |
| ret = ops->set_input_current_limit(rdev, |
| rdev->constraints->ilim_uA); |
| if (ret < 0) { |
| rdev_err(rdev, "failed to set input limit\n"); |
| return ret; |
| } |
| } |
| |
| /* do we need to setup our suspend state */ |
| if (rdev->constraints->initial_state) { |
| ret = suspend_prepare(rdev, rdev->constraints->initial_state); |
| if (ret < 0) { |
| rdev_err(rdev, "failed to set suspend state\n"); |
| return ret; |
| } |
| } |
| |
| if (rdev->constraints->initial_mode) { |
| if (!ops->set_mode) { |
| rdev_err(rdev, "no set_mode operation\n"); |
| return -EINVAL; |
| } |
| |
| ret = ops->set_mode(rdev, rdev->constraints->initial_mode); |
| if (ret < 0) { |
| rdev_err(rdev, "failed to set initial mode: %d\n", ret); |
| return ret; |
| } |
| } |
| |
| /* If the constraints say the regulator should be on at this point |
| * and we have control then make sure it is enabled. |
| */ |
| if (rdev->constraints->always_on || rdev->constraints->boot_on) { |
| ret = _regulator_do_enable(rdev); |
| if (ret < 0 && ret != -EINVAL) { |
| rdev_err(rdev, "failed to enable\n"); |
| return ret; |
| } |
| } |
| |
| if ((rdev->constraints->ramp_delay || rdev->constraints->ramp_disable) |
| && ops->set_ramp_delay) { |
| ret = ops->set_ramp_delay(rdev, rdev->constraints->ramp_delay); |
| if (ret < 0) { |
| rdev_err(rdev, "failed to set ramp_delay\n"); |
| return ret; |
| } |
| } |
| |
| if (rdev->constraints->pull_down && ops->set_pull_down) { |
| ret = ops->set_pull_down(rdev); |
| if (ret < 0) { |
| rdev_err(rdev, "failed to set pull down\n"); |
| return ret; |
| } |
| } |
| |
| if (rdev->constraints->soft_start && ops->set_soft_start) { |
| ret = ops->set_soft_start(rdev); |
| if (ret < 0) { |
| rdev_err(rdev, "failed to set soft start\n"); |
| return ret; |
| } |
| } |
| |
| if (rdev->constraints->over_current_protection |
| && ops->set_over_current_protection) { |
| ret = ops->set_over_current_protection(rdev); |
| if (ret < 0) { |
| rdev_err(rdev, "failed to set over current protection\n"); |
| return ret; |
| } |
| } |
| |
| if (rdev->constraints->active_discharge && ops->set_active_discharge) { |
| bool ad_state = (rdev->constraints->active_discharge == |
| REGULATOR_ACTIVE_DISCHARGE_ENABLE) ? true : false; |
| |
| ret = ops->set_active_discharge(rdev, ad_state); |
| if (ret < 0) { |
| rdev_err(rdev, "failed to set active discharge\n"); |
| return ret; |
| } |
| } |
| |
| print_constraints(rdev); |
| return 0; |
| } |
| |
| /** |
| * set_supply - set regulator supply regulator |
| * @rdev: regulator name |
| * @supply_rdev: supply regulator name |
| * |
| * Called by platform initialisation code to set the supply regulator for this |
| * regulator. This ensures that a regulators supply will also be enabled by the |
| * core if it's child is enabled. |
| */ |
| static int set_supply(struct regulator_dev *rdev, |
| struct regulator_dev *supply_rdev) |
| { |
| int err; |
| |
| rdev_info(rdev, "supplied by %s\n", rdev_get_name(supply_rdev)); |
| |
| if (!try_module_get(supply_rdev->owner)) |
| return -ENODEV; |
| |
| rdev->supply = create_regulator(supply_rdev, &rdev->dev, "SUPPLY"); |
| if (rdev->supply == NULL) { |
| err = -ENOMEM; |
| return err; |
| } |
| supply_rdev->open_count++; |
| |
| return 0; |
| } |
| |
| /** |
| * set_consumer_device_supply - Bind a regulator to a symbolic supply |
| * @rdev: regulator source |
| * @consumer_dev_name: dev_name() string for device supply applies to |
| * @supply: symbolic name for supply |
| * |
| * Allows platform initialisation code to map physical regulator |
| * sources to symbolic names for supplies for use by devices. Devices |
| * should use these symbolic names to request regulators, avoiding the |
| * need to provide board-specific regulator names as platform data. |
| */ |
| static int set_consumer_device_supply(struct regulator_dev *rdev, |
| const char *consumer_dev_name, |
| const char *supply) |
| { |
| struct regulator_map *node; |
| int has_dev; |
| |
| if (supply == NULL) |
| return -EINVAL; |
| |
| if (consumer_dev_name != NULL) |
| has_dev = 1; |
| else |
| has_dev = 0; |
| |
| list_for_each_entry(node, ®ulator_map_list, list) { |
| if (node->dev_name && consumer_dev_name) { |
| if (strcmp(node->dev_name, consumer_dev_name) != 0) |
| continue; |
| } else if (node->dev_name || consumer_dev_name) { |
| continue; |
| } |
| |
| if (strcmp(node->supply, supply) != 0) |
| continue; |
| |
| pr_debug("%s: %s/%s is '%s' supply; fail %s/%s\n", |
| consumer_dev_name, |
| dev_name(&node->regulator->dev), |
| node->regulator->desc->name, |
| supply, |
| dev_name(&rdev->dev), rdev_get_name(rdev)); |
| return -EBUSY; |
| } |
| |
| node = kzalloc(sizeof(struct regulator_map), GFP_KERNEL); |
| if (node == NULL) |
| return -ENOMEM; |
| |
| node->regulator = rdev; |
| node->supply = supply; |
| |
| if (has_dev) { |
| node->dev_name = kstrdup(consumer_dev_name, GFP_KERNEL); |
| if (node->dev_name == NULL) { |
| kfree(node); |
| return -ENOMEM; |
| } |
| } |
| |
| list_add(&node->list, ®ulator_map_list); |
| return 0; |
| } |
| |
| static void unset_regulator_supplies(struct regulator_dev *rdev) |
| { |
| struct regulator_map *node, *n; |
| |
| list_for_each_entry_safe(node, n, ®ulator_map_list, list) { |
| if (rdev == node->regulator) { |
| list_del(&node->list); |
| kfree(node->dev_name); |
| kfree(node); |
| } |
| } |
| } |
| |
| #ifdef CONFIG_DEBUG_FS |
| static ssize_t constraint_flags_read_file(struct file *file, |
| char __user *user_buf, |
| size_t count, loff_t *ppos) |
| { |
| const struct regulator *regulator = file->private_data; |
| const struct regulation_constraints *c = regulator->rdev->constraints; |
| char *buf; |
| ssize_t ret; |
| |
| if (!c) |
| return 0; |
| |
| buf = kmalloc(PAGE_SIZE, GFP_KERNEL); |
| if (!buf) |
| return -ENOMEM; |
| |
| ret = snprintf(buf, PAGE_SIZE, |
| "always_on: %u\n" |
| "boot_on: %u\n" |
| "apply_uV: %u\n" |
| "ramp_disable: %u\n" |
| "soft_start: %u\n" |
| "pull_down: %u\n" |
| "over_current_protection: %u\n", |
| c->always_on, |
| c->boot_on, |
| c->apply_uV, |
| c->ramp_disable, |
| c->soft_start, |
| c->pull_down, |
| c->over_current_protection); |
| |
| ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); |
| kfree(buf); |
| |
| return ret; |
| } |
| |
| #endif |
| |
| static const struct file_operations constraint_flags_fops = { |
| #ifdef CONFIG_DEBUG_FS |
| .open = simple_open, |
| .read = constraint_flags_read_file, |
| .llseek = default_llseek, |
| #endif |
| }; |
| |
| #define REG_STR_SIZE 64 |
| |
| static struct regulator *create_regulator(struct regulator_dev *rdev, |
| struct device *dev, |
| const char *supply_name) |
| { |
| struct regulator *regulator; |
| char buf[REG_STR_SIZE]; |
| int err, size; |
| |
| regulator = kzalloc(sizeof(*regulator), GFP_KERNEL); |
| if (regulator == NULL) |
| return NULL; |
| |
| mutex_lock(&rdev->mutex); |
| regulator->rdev = rdev; |
| list_add(®ulator->list, &rdev->consumer_list); |
| |
| if (dev) { |
| regulator->dev = dev; |
| |
| /* Add a link to the device sysfs entry */ |
| size = snprintf(buf, REG_STR_SIZE, "%s-%s", |
| dev->kobj.name, supply_name); |
| if (size >= REG_STR_SIZE) |
| goto overflow_err; |
| |
| regulator->supply_name = kstrdup(buf, GFP_KERNEL); |
| if (regulator->supply_name == NULL) |
| goto overflow_err; |
| |
| err = sysfs_create_link_nowarn(&rdev->dev.kobj, &dev->kobj, |
| buf); |
| if (err) { |
| rdev_dbg(rdev, "could not add device link %s err %d\n", |
| dev->kobj.name, err); |
| /* non-fatal */ |
| } |
| } else { |
| regulator->supply_name = kstrdup_const(supply_name, GFP_KERNEL); |
| if (regulator->supply_name == NULL) |
| goto overflow_err; |
| } |
| |
| regulator->debugfs = debugfs_create_dir(regulator->supply_name, |
| rdev->debugfs); |
| if (!regulator->debugfs) { |
| rdev_dbg(rdev, "Failed to create debugfs directory\n"); |
| } else { |
| debugfs_create_u32("uA_load", 0444, regulator->debugfs, |
| ®ulator->uA_load); |
| debugfs_create_u32("min_uV", 0444, regulator->debugfs, |
| ®ulator->min_uV); |
| debugfs_create_u32("max_uV", 0444, regulator->debugfs, |
| ®ulator->max_uV); |
| debugfs_create_file("constraint_flags", 0444, |
| regulator->debugfs, regulator, |
| &constraint_flags_fops); |
| } |
| |
| /* |
| * Check now if the regulator is an always on regulator - if |
| * it is then we don't need to do nearly so much work for |
| * enable/disable calls. |
| */ |
| if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS) && |
| _regulator_is_enabled(rdev)) |
| regulator->always_on = true; |
| |
| mutex_unlock(&rdev->mutex); |
| return regulator; |
| overflow_err: |
| list_del(®ulator->list); |
| kfree(regulator); |
| mutex_unlock(&rdev->mutex); |
| return NULL; |
| } |
| |
| static int _regulator_get_enable_time(struct regulator_dev *rdev) |
| { |
| if (rdev->constraints && rdev->constraints->enable_time) |
| return rdev->constraints->enable_time; |
| if (!rdev->desc->ops->enable_time) |
| return rdev->desc->enable_time; |
| return rdev->desc->ops->enable_time(rdev); |
| } |
| |
| static struct regulator_supply_alias *regulator_find_supply_alias( |
| struct device *dev, const char *supply) |
| { |
| struct regulator_supply_alias *map; |
| |
| list_for_each_entry(map, ®ulator_supply_alias_list, list) |
| if (map->src_dev == dev && strcmp(map->src_supply, supply) == 0) |
| return map; |
| |
| return NULL; |
| } |
| |
| static void regulator_supply_alias(struct device **dev, const char **supply) |
| { |
| struct regulator_supply_alias *map; |
| |
| map = regulator_find_supply_alias(*dev, *supply); |
| if (map) { |
| dev_dbg(*dev, "Mapping supply %s to %s,%s\n", |
| *supply, map->alias_supply, |
| dev_name(map->alias_dev)); |
| *dev = map->alias_dev; |
| *supply = map->alias_supply; |
| } |
| } |
| |
| static int of_node_match(struct device *dev, const void *data) |
| { |
| return dev->of_node == data; |
| } |
| |
| static struct regulator_dev *of_find_regulator_by_node(struct device_node *np) |
| { |
| struct device *dev; |
| |
| dev = class_find_device(®ulator_class, NULL, np, of_node_match); |
| |
| return dev ? dev_to_rdev(dev) : NULL; |
| } |
| |
| static int regulator_match(struct device *dev, const void *data) |
| { |
| struct regulator_dev *r = dev_to_rdev(dev); |
| |
| return strcmp(rdev_get_name(r), data) == 0; |
| } |
| |
| static struct regulator_dev *regulator_lookup_by_name(const char *name) |
| { |
| struct device *dev; |
| |
| dev = class_find_device(®ulator_class, NULL, name, regulator_match); |
| |
| return dev ? dev_to_rdev(dev) : NULL; |
| } |
| |
| /** |
| * regulator_dev_lookup - lookup a regulator device. |
| * @dev: device for regulator "consumer". |
| * @supply: Supply name or regulator ID. |
| * |
| * If successful, returns a struct regulator_dev that corresponds to the name |
| * @supply and with the embedded struct device refcount incremented by one. |
| * The refcount must be dropped by calling put_device(). |
| * On failure one of the following ERR-PTR-encoded values is returned: |
| * -ENODEV if lookup fails permanently, -EPROBE_DEFER if lookup could succeed |
| * in the future. |
| */ |
| static struct regulator_dev *regulator_dev_lookup(struct device *dev, |
| const char *supply) |
| { |
| struct regulator_dev *r = NULL; |
| struct device_node *node; |
| struct regulator_map *map; |
| const char *devname = NULL; |
| |
| regulator_supply_alias(&dev, &supply); |
| |
| /* first do a dt based lookup */ |
| if (dev && dev->of_node) { |
| node = of_get_regulator(dev, supply); |
| if (node) { |
| r = of_find_regulator_by_node(node); |
| if (r) |
| return r; |
| |
| /* |
| * We have a node, but there is no device. |
| * assume it has not registered yet. |
| */ |
| return ERR_PTR(-EPROBE_DEFER); |
| } |
| } |
| |
| /* if not found, try doing it non-dt way */ |
| if (dev) |
| devname = dev_name(dev); |
| |
| mutex_lock(®ulator_list_mutex); |
| list_for_each_entry(map, ®ulator_map_list, list) { |
| /* If the mapping has a device set up it must match */ |
| if (map->dev_name && |
| (!devname || strcmp(map->dev_name, devname))) |
| continue; |
| |
| if (strcmp(map->supply, supply) == 0 && |
| get_device(&map->regulator->dev)) { |
| r = map->regulator; |
| break; |
| } |
| } |
| mutex_unlock(®ulator_list_mutex); |
| |
| if (r) |
| return r; |
| |
| r = regulator_lookup_by_name(supply); |
| if (r) |
| return r; |
| |
| return ERR_PTR(-ENODEV); |
| } |
| |
| static int regulator_resolve_supply(struct regulator_dev *rdev) |
| { |
| struct regulator_dev *r; |
| struct device *dev = rdev->dev.parent; |
| int ret; |
| |
| /* No supply to resovle? */ |
| if (!rdev->supply_name) |
| return 0; |
| |
| /* Supply already resolved? */ |
| if (rdev->supply) |
| return 0; |
| |
| r = regulator_dev_lookup(dev, rdev->supply_name); |
| if (IS_ERR(r)) { |
| ret = PTR_ERR(r); |
| |
| /* Did the lookup explicitly defer for us? */ |
| if (ret == -EPROBE_DEFER) |
| return ret; |
| |
| if (have_full_constraints()) { |
| r = dummy_regulator_rdev; |
| get_device(&r->dev); |
| } else { |
| dev_err(dev, "Failed to resolve %s-supply for %s\n", |
| rdev->supply_name, rdev->desc->name); |
| return -EPROBE_DEFER; |
| } |
| } |
| |
| /* |
| * If the supply's parent device is not the same as the |
| * regulator's parent device, then ensure the parent device |
| * is bound before we resolve the supply, in case the parent |
| * device get probe deferred and unregisters the supply. |
| */ |
| if (r->dev.parent && r->dev.parent != rdev->dev.parent) { |
| if (!device_is_bound(r->dev.parent)) { |
| put_device(&r->dev); |
| return -EPROBE_DEFER; |
| } |
| } |
| |
| /* Recursively resolve the supply of the supply */ |
| ret = regulator_resolve_supply(r); |
| if (ret < 0) { |
| put_device(&r->dev); |
| return ret; |
| } |
| |
| ret = set_supply(rdev, r); |
| if (ret < 0) { |
| put_device(&r->dev); |
| return ret; |
| } |
| |
| /* Cascade always-on state to supply */ |
| if (_regulator_is_enabled(rdev)) { |
| ret = regulator_enable(rdev->supply); |
| if (ret < 0) { |
| _regulator_put(rdev->supply); |
| rdev->supply = NULL; |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* Internal regulator request function */ |
| struct regulator *_regulator_get(struct device *dev, const char *id, |
| enum regulator_get_type get_type) |
| { |
| struct regulator_dev *rdev; |
| struct regulator *regulator; |
| const char *devname = dev ? dev_name(dev) : "deviceless"; |
| int ret; |
| |
| if (get_type >= MAX_GET_TYPE) { |
| dev_err(dev, "invalid type %d in %s\n", get_type, __func__); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| if (id == NULL) { |
| pr_err("get() with no identifier\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| rdev = regulator_dev_lookup(dev, id); |
| if (IS_ERR(rdev)) { |
| ret = PTR_ERR(rdev); |
| |
| /* |
| * If regulator_dev_lookup() fails with error other |
| * than -ENODEV our job here is done, we simply return it. |
| */ |
| if (ret != -ENODEV) |
| return ERR_PTR(ret); |
| |
| if (!have_full_constraints()) { |
| dev_warn(dev, |
| "incomplete constraints, dummy supplies not allowed\n"); |
| return ERR_PTR(-ENODEV); |
| } |
| |
| switch (get_type) { |
| case NORMAL_GET: |
| /* |
| * Assume that a regulator is physically present and |
| * enabled, even if it isn't hooked up, and just |
| * provide a dummy. |
| */ |
| dev_warn(dev, |
| "%s supply %s not found, using dummy regulator\n", |
| devname, id); |
| rdev = dummy_regulator_rdev; |
| get_device(&rdev->dev); |
| break; |
| |
| case EXCLUSIVE_GET: |
| dev_warn(dev, |
| "dummy supplies not allowed for exclusive requests\n"); |
| /* fall through */ |
| |
| default: |
| return ERR_PTR(-ENODEV); |
| } |
| } |
| |
| if (rdev->exclusive) { |
| regulator = ERR_PTR(-EPERM); |
| put_device(&rdev->dev); |
| return regulator; |
| } |
| |
| if (get_type == EXCLUSIVE_GET && rdev->open_count) { |
| regulator = ERR_PTR(-EBUSY); |
| put_device(&rdev->dev); |
| return regulator; |
| } |
| |
| ret = regulator_resolve_supply(rdev); |
| if (ret < 0) { |
| regulator = ERR_PTR(ret); |
| put_device(&rdev->dev); |
| return regulator; |
| } |
| |
| if (!try_module_get(rdev->owner)) { |
| regulator = ERR_PTR(-EPROBE_DEFER); |
| put_device(&rdev->dev); |
| return regulator; |
| } |
| |
| regulator = create_regulator(rdev, dev, id); |
| if (regulator == NULL) { |
| regulator = ERR_PTR(-ENOMEM); |
| put_device(&rdev->dev); |
| module_put(rdev->owner); |
| return regulator; |
| } |
| |
| rdev->open_count++; |
| if (get_type == EXCLUSIVE_GET) { |
| rdev->exclusive = 1; |
| |
| ret = _regulator_is_enabled(rdev); |
| if (ret > 0) |
| rdev->use_count = 1; |
| else |
| rdev->use_count = 0; |
| } |
| |
| return regulator; |
| } |
| |
| /** |
| * regulator_get - lookup and obtain a reference to a regulator. |
| * @dev: device for regulator "consumer" |
| * @id: Supply name or regulator ID. |
| * |
| * Returns a struct regulator corresponding to the regulator producer, |
| * or IS_ERR() condition containing errno. |
| * |
| * Use of supply names configured via regulator_set_device_supply() is |
| * strongly encouraged. It is recommended that the supply name used |
| * should match the name used for the supply and/or the relevant |
| * device pins in the datasheet. |
| */ |
| struct regulator *regulator_get(struct device *dev, const char *id) |
| { |
| return _regulator_get(dev, id, NORMAL_GET); |
| } |
| EXPORT_SYMBOL_GPL(regulator_get); |
| |
| /** |
| * regulator_get_exclusive - obtain exclusive access to a regulator. |
| * @dev: device for regulator "consumer" |
| * @id: Supply name or regulator ID. |
| * |
| * Returns a struct regulator corresponding to the regulator producer, |
| * or IS_ERR() condition containing errno. Other consumers will be |
| * unable to obtain this regulator while this reference is held and the |
| * use count for the regulator will be initialised to reflect the current |
| * state of the regulator. |
| * |
| * This is intended for use by consumers which cannot tolerate shared |
| * use of the regulator such as those which need to force the |
| * regulator off for correct operation of the hardware they are |
| * controlling. |
| * |
| * Use of supply names configured via regulator_set_device_supply() is |
| * strongly encouraged. It is recommended that the supply name used |
| * should match the name used for the supply and/or the relevant |
| * device pins in the datasheet. |
| */ |
| struct regulator *regulator_get_exclusive(struct device *dev, const char *id) |
| { |
| return _regulator_get(dev, id, EXCLUSIVE_GET); |
| } |
| EXPORT_SYMBOL_GPL(regulator_get_exclusive); |
| |
| /** |
| * regulator_get_optional - obtain optional access to a regulator. |
| * @dev: device for regulator "consumer" |
| * @id: Supply name or regulator ID. |
| * |
| * Returns a struct regulator corresponding to the regulator producer, |
| * or IS_ERR() condition containing errno. |
| * |
| * This is intended for use by consumers for devices which can have |
| * some supplies unconnected in normal use, such as some MMC devices. |
| * It can allow the regulator core to provide stub supplies for other |
| * supplies requested using normal regulator_get() calls without |
| * disrupting the operation of drivers that can handle absent |
| * supplies. |
| * |
| * Use of supply names configured via regulator_set_device_supply() is |
| * strongly encouraged. It is recommended that the supply name used |
| * should match the name used for the supply and/or the relevant |
| * device pins in the datasheet. |
| */ |
| struct regulator *regulator_get_optional(struct device *dev, const char *id) |
| { |
| return _regulator_get(dev, id, OPTIONAL_GET); |
| } |
| EXPORT_SYMBOL_GPL(regulator_get_optional); |
| |
| /* regulator_list_mutex lock held by regulator_put() */ |
| static void _regulator_put(struct regulator *regulator) |
| { |
| struct regulator_dev *rdev; |
| |
| if (IS_ERR_OR_NULL(regulator)) |
| return; |
| |
| lockdep_assert_held_once(®ulator_list_mutex); |
| |
| rdev = regulator->rdev; |
| |
| debugfs_remove_recursive(regulator->debugfs); |
| |
| /* remove any sysfs entries */ |
| if (regulator->dev) |
| sysfs_remove_link(&rdev->dev.kobj, regulator->supply_name); |
| mutex_lock(&rdev->mutex); |
| list_del(®ulator->list); |
| |
| rdev->open_count--; |
| rdev->exclusive = 0; |
| put_device(&rdev->dev); |
| mutex_unlock(&rdev->mutex); |
| |
| kfree_const(regulator->supply_name); |
| kfree(regulator); |
| |
| module_put(rdev->owner); |
| } |
| |
| /** |
| * regulator_put - "free" the regulator source |
| * @regulator: regulator source |
| * |
| * Note: drivers must ensure that all regulator_enable calls made on this |
| * regulator source are balanced by regulator_disable calls prior to calling |
| * this function. |
| */ |
| void regulator_put(struct regulator *regulator) |
| { |
| mutex_lock(®ulator_list_mutex); |
| _regulator_put(regulator); |
| mutex_unlock(®ulator_list_mutex); |
| } |
| EXPORT_SYMBOL_GPL(regulator_put); |
| |
| /** |
| * regulator_register_supply_alias - Provide device alias for supply lookup |
| * |
| * @dev: device that will be given as the regulator "consumer" |
| * @id: Supply name or regulator ID |
| * @alias_dev: device that should be used to lookup the supply |
| * @alias_id: Supply name or regulator ID that should be used to lookup the |
| * supply |
| * |
| * All lookups for id on dev will instead be conducted for alias_id on |
| * alias_dev. |
| */ |
| int regulator_register_supply_alias(struct device *dev, const char *id, |
| struct device *alias_dev, |
| const char *alias_id) |
| { |
| struct regulator_supply_alias *map; |
| |
| map = regulator_find_supply_alias(dev, id); |
| if (map) |
| return -EEXIST; |
| |
| map = kzalloc(sizeof(struct regulator_supply_alias), GFP_KERNEL); |
| if (!map) |
| return -ENOMEM; |
| |
| map->src_dev = dev; |
| map->src_supply = id; |
| map->alias_dev = alias_dev; |
| map->alias_supply = alias_id; |
| |
| list_add(&map->list, ®ulator_supply_alias_list); |
| |
| pr_info("Adding alias for supply %s,%s -> %s,%s\n", |
| id, dev_name(dev), alias_id, dev_name(alias_dev)); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(regulator_register_supply_alias); |
| |
| /** |
| * regulator_unregister_supply_alias - Remove device alias |
| * |
| * @dev: device that will be given as the regulator "consumer" |
| * @id: Supply name or regulator ID |
| * |
| * Remove a lookup alias if one exists for id on dev. |
| */ |
| void regulator_unregister_supply_alias(struct device *dev, const char *id) |
| { |
| struct regulator_supply_alias *map; |
| |
| map = regulator_find_supply_alias(dev, id); |
| if (map) { |
| list_del(&map->list); |
| kfree(map); |
| } |
| } |
| EXPORT_SYMBOL_GPL(regulator_unregister_supply_alias); |
| |
| /** |
| * regulator_bulk_register_supply_alias - register multiple aliases |
| * |
| * @dev: device that will be given as the regulator "consumer" |
| * @id: List of supply names or regulator IDs |
| * @alias_dev: device that should be used to lookup the supply |
| * @alias_id: List of supply names or regulator IDs that should be used to |
| * lookup the supply |
| * @num_id: Number of aliases to register |
| * |
| * @return 0 on success, an errno on failure. |
| * |
| * This helper function allows drivers to register several supply |
| * aliases in one operation. If any of the aliases cannot be |
| * registered any aliases that were registered will be removed |
| * before returning to the caller. |
| */ |
| int regulator_bulk_register_supply_alias(struct device *dev, |
| const char *const *id, |
| struct device *alias_dev, |
| const char *const *alias_id, |
| int num_id) |
| { |
| int i; |
| int ret; |
| |
| for (i = 0; i < num_id; ++i) { |
| ret = regulator_register_supply_alias(dev, id[i], alias_dev, |
| alias_id[i]); |
| if (ret < 0) |
| goto err; |
| } |
| |
| return 0; |
| |
| err: |
| dev_err(dev, |
| "Failed to create supply alias %s,%s -> %s,%s\n", |
| id[i], dev_name(dev), alias_id[i], dev_name(alias_dev)); |
| |
| while (--i >= 0) |
| regulator_unregister_supply_alias(dev, id[i]); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(regulator_bulk_register_supply_alias); |
| |
| /** |
| * regulator_bulk_unregister_supply_alias - unregister multiple aliases |
| * |
| * @dev: device that will be given as the regulator "consumer" |
| * @id: List of supply names or regulator IDs |
| * @num_id: Number of aliases to unregister |
| * |
| * This helper function allows drivers to unregister several supply |
| * aliases in one operation. |
| */ |
| void regulator_bulk_unregister_supply_alias(struct device *dev, |
| const char *const *id, |
| int num_id) |
| { |
| int i; |
| |
| for (i = 0; i < num_id; ++i) |
| regulator_unregister_supply_alias(dev, id[i]); |
| } |
| EXPORT_SYMBOL_GPL(regulator_bulk_unregister_supply_alias); |
| |
| |
| /* Manage enable GPIO list. Same GPIO pin can be shared among regulators */ |
| static int regulator_ena_gpio_request(struct regulator_dev *rdev, |
| const struct regulator_config *config) |
| { |
| struct regulator_enable_gpio *pin; |
| struct gpio_desc *gpiod; |
| int ret; |
| |
| gpiod = gpio_to_desc(config->ena_gpio); |
| |
| list_for_each_entry(pin, ®ulator_ena_gpio_list, list) { |
| if (pin->gpiod == gpiod) { |
| rdev_dbg(rdev, "GPIO %d is already used\n", |
| config->ena_gpio); |
| goto update_ena_gpio_to_rdev; |
| } |
| } |
| |
| ret = gpio_request_one(config->ena_gpio, |
| GPIOF_DIR_OUT | config->ena_gpio_flags, |
| rdev_get_name(rdev)); |
| if (ret) |
| return ret; |
| |
| pin = kzalloc(sizeof(struct regulator_enable_gpio), GFP_KERNEL); |
| if (pin == NULL) { |
| gpio_free(config->ena_gpio); |
| return -ENOMEM; |
| } |
| |
| pin->gpiod = gpiod; |
| pin->ena_gpio_invert = config->ena_gpio_invert; |
| list_add(&pin->list, ®ulator_ena_gpio_list); |
| |
| update_ena_gpio_to_rdev: |
| pin->request_count++; |
| rdev->ena_pin = pin; |
| return 0; |
| } |
| |
| static void regulator_ena_gpio_free(struct regulator_dev *rdev) |
| { |
| struct regulator_enable_gpio *pin, *n; |
| |
| if (!rdev->ena_pin) |
| return; |
| |
| /* Free the GPIO only in case of no use */ |
| list_for_each_entry_safe(pin, n, ®ulator_ena_gpio_list, list) { |
| if (pin->gpiod == rdev->ena_pin->gpiod) { |
| if (pin->request_count <= 1) { |
| pin->request_count = 0; |
| gpiod_put(pin->gpiod); |
| list_del(&pin->list); |
| kfree(pin); |
| rdev->ena_pin = NULL; |
| return; |
| } else { |
| pin->request_count--; |
| } |
| } |
| } |
| } |
| |
| /** |
| * regulator_ena_gpio_ctrl - balance enable_count of each GPIO and actual GPIO pin control |
| * @rdev: regulator_dev structure |
| * @enable: enable GPIO at initial use? |
| * |
| * GPIO is enabled in case of initial use. (enable_count is 0) |
| * GPIO is disabled when it is not shared any more. (enable_count <= 1) |
| */ |
| static int regulator_ena_gpio_ctrl(struct regulator_dev *rdev, bool enable) |
| { |
| struct regulator_enable_gpio *pin = rdev->ena_pin; |
| |
| if (!pin) |
| return -EINVAL; |
| |
| if (enable) { |
| /* Enable GPIO at initial use */ |
| if (pin->enable_count == 0) |
| gpiod_set_value_cansleep(pin->gpiod, |
| !pin->ena_gpio_invert); |
| |
| pin->enable_count++; |
| } else { |
| if (pin->enable_count > 1) { |
| pin->enable_count--; |
| return 0; |
| } |
| |
| /* Disable GPIO if not used */ |
| if (pin->enable_count <= 1) { |
| gpiod_set_value_cansleep(pin->gpiod, |
| pin->ena_gpio_invert); |
| pin->enable_count = 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * _regulator_enable_delay - a delay helper function |
| * @delay: time to delay in microseconds |
| * |
| * Delay for the requested amount of time as per the guidelines in: |
| * |
| * Documentation/timers/timers-howto.txt |
| * |
| * The assumption here is that regulators will never be enabled in |
| * atomic context and therefore sleeping functions can be used. |
| */ |
| static void _regulator_enable_delay(unsigned int delay) |
| { |
| unsigned int ms = delay / 1000; |
| unsigned int us = delay % 1000; |
| |
| if (ms > 0) { |
| /* |
| * For small enough values, handle super-millisecond |
| * delays in the usleep_range() call below. |
| */ |
| if (ms < 20) |
| us += ms * 1000; |
| else |
| msleep(ms); |
| } |
| |
| /* |
| * Give the scheduler some room to coalesce with any other |
| * wakeup sources. For delays shorter than 10 us, don't even |
| * bother setting up high-resolution timers and just busy- |
| * loop. |
| */ |
| if (us >= 10) |
| usleep_range(us, us + 100); |
| else |
| udelay(us); |
| } |
| |
| static int _regulator_do_enable(struct regulator_dev *rdev) |
| { |
| int ret, delay; |
| |
| /* Query before enabling in case configuration dependent. */ |
| ret = _regulator_get_enable_time(rdev); |
| if (ret >= 0) { |
| delay = ret; |
| } else { |
| rdev_warn(rdev, "enable_time() failed: %d\n", ret); |
| delay = 0; |
| } |
| |
| trace_regulator_enable(rdev_get_name(rdev)); |
| |
| if (rdev->desc->off_on_delay) { |
| /* if needed, keep a distance of off_on_delay from last time |
| * this regulator was disabled. |
| */ |
| unsigned long start_jiffy = jiffies; |
| unsigned long intended, max_delay, remaining; |
| |
| max_delay = usecs_to_jiffies(rdev->desc->off_on_delay); |
| intended = rdev->last_off_jiffy + max_delay; |
| |
| if (time_before(start_jiffy, intended)) { |
| /* calc remaining jiffies to deal with one-time |
| * timer wrapping. |
| * in case of multiple timer wrapping, either it can be |
| * detected by out-of-range remaining, or it cannot be |
| * detected and we gets a panelty of |
| * _regulator_enable_delay(). |
| */ |
| remaining = intended - start_jiffy; |
| if (remaining <= max_delay) |
| _regulator_enable_delay( |
| jiffies_to_usecs(remaining)); |
| } |
| } |
| |
| if (rdev->ena_pin) { |
| if (!rdev->ena_gpio_state) { |
| ret = regulator_ena_gpio_ctrl(rdev, true); |
| if (ret < 0) |
| return ret; |
| rdev->ena_gpio_state = 1; |
| } |
| } else if (rdev->desc->ops->enable) { |
| ret = rdev->desc->ops->enable(rdev); |
| if (ret < 0) |
| return ret; |
| } else { |
| return -EINVAL; |
| } |
| |
| /* Allow the regulator to ramp; it would be useful to extend |
| * this for bulk operations so that the regulators can ramp |
| * together. */ |
| trace_regulator_enable_delay(rdev_get_name(rdev)); |
| |
| _regulator_enable_delay(delay); |
| |
| trace_regulator_enable_complete(rdev_get_name(rdev)); |
| |
| return 0; |
| } |
| |
| /* locks held by regulator_enable() */ |
| static int _regulator_enable(struct regulator_dev *rdev) |
| { |
| int ret; |
| |
| lockdep_assert_held_once(&rdev->mutex); |
| |
| /* check voltage and requested load before enabling */ |
| if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS)) |
| drms_uA_update(rdev); |
| |
| if (rdev->use_count == 0) { |
| /* The regulator may on if it's not switchable or left on */ |
| ret = _regulator_is_enabled(rdev); |
| if (ret == -EINVAL || ret == 0) { |
| if (!regulator_ops_is_valid(rdev, |
| REGULATOR_CHANGE_STATUS)) |
| return -EPERM; |
| |
| ret = _regulator_do_enable(rdev); |
| if (ret < 0) |
| return ret; |
| |
| _notifier_call_chain(rdev, REGULATOR_EVENT_ENABLE, |
| NULL); |
| } else if (ret < 0) { |
| rdev_err(rdev, "is_enabled() failed: %d\n", ret); |
| return ret; |
| } |
| /* Fallthrough on positive return values - already enabled */ |
| } |
| |
| rdev->use_count++; |
| |
| return 0; |
| } |
| |
| /** |
| * regulator_enable - enable regulator output |
| * @regulator: regulator source |
| * |
| * Request that the regulator be enabled with the regulator output at |
| * the predefined voltage or current value. Calls to regulator_enable() |
| * must be balanced with calls to regulator_disable(). |
| * |
| * NOTE: the output value can be set by other drivers, boot loader or may be |
| * hardwired in the regulator. |
| */ |
| int regulator_enable(struct regulator *regulator) |
| { |
| struct regulator_dev *rdev = regulator->rdev; |
| int ret = 0; |
| |
| if (regulator->always_on) |
| return 0; |
| |
| if (rdev->supply) { |
| ret = regulator_enable(rdev->supply); |
| if (ret != 0) |
| return ret; |
| } |
| |
| mutex_lock(&rdev->mutex); |
| ret = _regulator_enable(rdev); |
| mutex_unlock(&rdev->mutex); |
| |
| if (ret != 0 && rdev->supply) |
| regulator_disable(rdev->supply); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(regulator_enable); |
| |
| static int _regulator_do_disable(struct regulator_dev *rdev) |
| { |
| int ret; |
| |
| trace_regulator_disable(rdev_get_name(rdev)); |
| |
| if (rdev->ena_pin) { |
| if (rdev->ena_gpio_state) { |
| ret = regulator_ena_gpio_ctrl(rdev, false); |
| if (ret < 0) |
| return ret; |
| rdev->ena_gpio_state = 0; |
| } |
| |
| } else if (rdev->desc->ops->disable) { |
| ret = rdev->desc->ops->disable(rdev); |
| if (ret != 0) |
| return ret; |
| } |
| |
| /* cares about last_off_jiffy only if off_on_delay is required by |
| * device. |
| */ |
| if (rdev->desc->off_on_delay) |
| rdev->last_off_jiffy = jiffies; |
| |
| trace_regulator_disable_complete(rdev_get_name(rdev)); |
| |
| return 0; |
| } |
| |
| /* locks held by regulator_disable() */ |
| static int _regulator_disable(struct regulator_dev *rdev) |
| { |
| int ret = 0; |
| |
| lockdep_assert_held_once(&rdev->mutex); |
| |
| if (WARN(rdev->use_count <= 0, |
| "unbalanced disables for %s\n", rdev_get_name(rdev))) |
| return -EIO; |
| |
| /* are we the last user and permitted to disable ? */ |
| if (rdev->use_count == 1 && |
| (rdev->constraints && !rdev->constraints->always_on)) { |
| |
| /* we are last user */ |
| if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_STATUS)) { |
| ret = _notifier_call_chain(rdev, |
| REGULATOR_EVENT_PRE_DISABLE, |
| NULL); |
| if (ret & NOTIFY_STOP_MASK) |
| return -EINVAL; |
| |
| ret = _regulator_do_disable(rdev); |
| if (ret < 0) { |
| rdev_err(rdev, "failed to disable\n"); |
| _notifier_call_chain(rdev, |
| REGULATOR_EVENT_ABORT_DISABLE, |
| NULL); |
| return ret; |
| } |
| _notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE, |
| NULL); |
| } |
| |
| rdev->use_count = 0; |
| } else if (rdev->use_count > 1) { |
| if (regulator_ops_is_valid(rdev, REGULATOR_CHANGE_DRMS)) |
| drms_uA_update(rdev); |
| |
| rdev->use_count--; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * regulator_disable - disable regulator output |
| * @regulator: regulator source |
| * |
| * Disable the regulator output voltage or current. Calls to |
| * regulator_enable() must be balanced with calls to |
| * regulator_disable(). |
| * |
| * NOTE: this will only disable the regulator output if no other consumer |
| * devices have it enabled, the regulator device supports disabling and |
| * machine constraints permit this operation. |
| */ |
| int regulator_disable(struct regulator *regulator) |
| { |
| struct regulator_dev *rdev = regulator->rdev; |
| int ret = 0; |
| |
| if (regulator->always_on) |
| return 0; |
| |
| mutex_lock(&rdev->mutex); |
| ret = _regulator_disable(rdev); |
| mutex_unlock(&rdev->mutex); |
| |
| if (ret == 0 && rdev->supply) |
| regulator_disable(rdev->supply); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(regulator_disable); |
| |
| /* locks held by regulator_force_disable() */ |
| static int _regulator_force_disable(struct regulator_dev *rdev) |
| { |
| int ret = 0; |
| |
| lockdep_assert_held_once(&rdev->mutex); |
| |
| ret = _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | |
| REGULATOR_EVENT_PRE_DISABLE, NULL); |
| if (ret & NOTIFY_STOP_MASK) |
| return -EINVAL; |
| |
| ret = _regulator_do_disable(rdev); |
| if (ret < 0) { |
| rdev_err(rdev, "failed to force disable\n"); |
| _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | |
| REGULATOR_EVENT_ABORT_DISABLE, NULL); |
| return ret; |
| } |
| |
| _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE | |
| REGULATOR_EVENT_DISABLE, NULL); |
| |
| return 0; |
| } |
| |
| /** |
| * regulator_force_disable - force disable regulator output |
| * @regulator: regulator source |
| * |
| * Forcibly disable the regulator output voltage or current. |
| * NOTE: this *will* disable the regulator output even if other consumer |
| * devices have it enabled. This should be used for situations when device |
| * damage will likely occur if the regulator is not disabled (e.g. over temp). |
| */ |
| int regulator_force_disable(struct regulator *regulator) |
| { |
| struct regulator_dev *rdev = regulator->rdev; |
| int ret; |
| |
| mutex_lock(&rdev->mutex); |
| regulator->uA_load = 0; |
| ret = _regulator_force_disable(regulator->rdev); |
| mutex_unlock(&rdev->mutex); |
| |
| if (rdev->supply) |
| while (rdev->open_count--) |
| regulator_disable(rdev->supply); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(regulator_force_disable); |
| |
| static void regulator_disable_work(struct work_struct *work) |
| { |
| struct regulator_dev *rdev = container_of(work, struct regulator_dev, |
| disable_work.work); |
| int count, i, ret; |
| |
| mutex_lock(&rdev->mutex); |
| |
| BUG_ON(!rdev->deferred_disables); |
| |
| count = rdev->deferred_disables; |
| rdev->deferred_disables = 0; |
| |
| /* |
| * Workqueue functions queue the new work instance while the previous |
| * work instance is being processed. Cancel the queued work instance |
| * as the work instance under processing does the job of the queued |
| * work instance. |
| */ |
| cancel_delayed_work(&rdev->disable_work); |
| |
| for (i = 0; i < count; i++) { |
| ret = _regulator_disable(rdev); |
| if (ret != 0) |
| rdev_err(rdev, "Deferred disable failed: %d\n", ret); |
| } |
| |
| mutex_unlock(&rdev->mutex); |
| |
| if (rdev->supply) { |
| for (i = 0; i < count; i++) { |
| ret = regulator_disable(rdev->supply); |
| if (ret != 0) { |
| rdev_err(rdev, |
| "Supply disable failed: %d\n", ret); |
| } |
| } |
| } |
| } |
| |
| /** |
| * regulator_disable_deferred - disable regulator output with delay |
| * @regulator: regulator source |
| * @ms: miliseconds until the regulator is disabled |
| * |
| * Execute regulator_disable() on the regulator after a delay. This |
| * is intended for use with devices that require some time to quiesce. |
| * |
| * NOTE: this will only disable the regulator output if no other consumer |
| * devices have it enabled, the regulator device supports disabling and |
| * machine constraints permit this operation. |
| */ |
| int regulator_disable_deferred(struct regulator *regulator, int ms) |
| { |
| struct regulator_dev *rdev = regulator->rdev; |
| |
| if (regulator->always_on) |
| return 0; |
| |
| if (!ms) |
| return regulator_disable(regulator); |
| |
| mutex_lock(&rdev->mutex); |
| rdev->deferred_disables++; |
| mod_delayed_work(system_power_efficient_wq, &rdev->disable_work, |
| msecs_to_jiffies(ms)); |
| mutex_unlock(&rdev->mutex); |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(regulator_disable_deferred); |
| |
| static int _regulator_is_enabled(struct regulator_dev *rdev) |
| { |
| /* A GPIO control always takes precedence */ |
| if (rdev->ena_pin) |
| return rdev->ena_gpio_state; |
| |
| /* If we don't know then assume that the regulator is always on */ |
| if (!rdev->desc->ops->is_enabled) |
| return 1; |
| |
| return rdev->desc->ops->is_enabled(rdev); |
| } |
| |
| static int _regulator_list_voltage(struct regulator *regulator, |
| unsigned selector, int lock) |
| { |
| struct regulator_dev *rdev = regulator->rdev; |
| const struct regulator_ops *ops = rdev->desc->ops; |
| int ret; |
| |
| if (rdev->desc->fixed_uV && rdev->desc->n_voltages == 1 && !selector) |
| return rdev->desc->fixed_uV; |
| |
| if (ops->list_voltage) { |
| if (selector >= rdev->desc->n_voltages) |
| return -EINVAL; |
| if (lock) |
| mutex_lock(&rdev->mutex); |
| ret = ops->list_voltage(rdev, selector); |
| if (lock) |
| mutex_unlock(&rdev->mutex); |
| } else if (rdev->is_switch && rdev->supply) { |
| ret = _regulator_list_voltage(rdev->supply, selector, lock); |
| } else { |
| return -EINVAL; |
| } |
| |
| if (ret > 0) { |
| if (ret < rdev->constraints->min_uV) |
| ret = 0; |
| else if (ret > rdev->constraints->max_uV) |
| ret = 0; |
| } |
| |
| return ret; |
| } |
| |
| /** |
| * regulator_is_enabled - is the regulator output enabled |
| * @regulator: regulator source |
| * |
| * Returns positive if the regulator driver backing the source/client |
| * has requested that the device be enabled, zero if it hasn't, else a |
| * negative errno code. |
| * |
| * Note that the device backing this regulator handle can have multiple |
| * users, so it might be enabled even if regulator_enable() was never |
| * called for this particular source. |
| */ |
| int regulator_is_enabled(struct regulator *regulator) |
| { |
| int ret; |
| |
| if (regulator->always_on) |
| return 1; |
| |
| mutex_lock(®ulator->rdev->mutex); |
| ret = _regulator_is_enabled(regulator->rdev); |
| mutex_unlock(®ulator->rdev->mutex); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(regulator_is_enabled); |
| |
| /** |
| * regulator_count_voltages - count regulator_list_voltage() selectors |
| * @regulator: regulator source |
| * |
| * Returns number of selectors, or negative errno. Selectors are |
| * numbered starting at zero, and typically correspond to bitfields |
| * in hardware registers. |
| */ |
| int regulator_count_voltages(struct regulator *regulator) |
| { |
| struct regulator_dev *rdev = regulator->rdev; |
| |
| if (rdev->desc->n_voltages) |
| return rdev->desc->n_voltages; |
| |
| if (!rdev->is_switch || !rdev->supply) |
| return -EINVAL; |
| |
| return regulator_count_voltages(rdev->supply); |
| } |
| EXPORT_SYMBOL_GPL(regulator_count_voltages); |
| |
| /** |
| * regulator_list_voltage - enumerate supported voltages |
| * @regulator: regulator source |
| * @selector: identify voltage to list |
| * Context: can sleep |
| * |
| * Returns a voltage that can be passed to @regulator_set_voltage(), |
| * zero if this selector code can't be used on this system, or a |
| * negative errno. |
| */ |
| int regulator_list_voltage(struct regulator *regulator, unsigned selector) |
| { |
| return _regulator_list_voltage(regulator, selector, 1); |
| } |
| EXPORT_SYMBOL_GPL(regulator_list_voltage); |
| |
| /** |
| * regulator_get_regmap - get the regulator's register map |
| * @regulator: regulator source |
| * |
| * Returns the register map for the given regulator, or an ERR_PTR value |
| * if the regulator doesn't use regmap. |
| */ |
| struct regmap *regulator_get_regmap(struct regulator *regulator) |
| { |
| struct regmap *map = regulator->rdev->regmap; |
| |
| return map ? map : ERR_PTR(-EOPNOTSUPP); |
| } |
| |
| /** |
| * regulator_get_hardware_vsel_register - get the HW voltage selector register |
| * @regulator: regulator source |
| * @vsel_reg: voltage selector register, output parameter |
| * @vsel_mask: mask for voltage selector bitfield, output parameter |
| * |
| * Returns the hardware register offset and bitmask used for setting the |
| * regulator voltage. This might be useful when configuring voltage-scaling |
| * hardware or firmware that can make I2C requests behind the kernel's back, |
| * for example. |
| * |
| * On success, the output parameters @vsel_reg and @vsel_mask are filled in |
| * and 0 is returned, otherwise a negative errno is returned. |
| */ |
| int regulator_get_hardware_vsel_register(struct regulator *regulator, |
| unsigned *vsel_reg, |
| unsigned *vsel_mask) |
| { |
| struct regulator_dev *rdev = regulator->rdev; |
| const struct regulator_ops *ops = rdev->desc->ops; |
| |
| if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap) |
| return -EOPNOTSUPP; |
| |
| *vsel_reg = rdev->desc->vsel_reg; |
| *vsel_mask = rdev->desc->vsel_mask; |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(regulator_get_hardware_vsel_register); |
| |
| /** |
| * regulator_list_hardware_vsel - get the HW-specific register value for a selector |
| * @regulator: regulator source |
| * @selector: identify voltage to list |
| * |
| * Converts the selector to a hardware-specific voltage selector that can be |
| * directly written to the regulator registers. The address of the voltage |
| * register can be determined by calling @regulator_get_hardware_vsel_register. |
| * |
| * On error a negative errno is returned. |
| */ |
| int regulator_list_hardware_vsel(struct regulator *regulator, |
| unsigned selector) |
| { |
| struct regulator_dev *rdev = regulator->rdev; |
| const struct regulator_ops *ops = rdev->desc->ops; |
| |
| if (selector >= rdev->desc->n_voltages) |
| return -EINVAL; |
| if (ops->set_voltage_sel != regulator_set_voltage_sel_regmap) |
| return -EOPNOTSUPP; |
| |
| return selector; |
| } |
| EXPORT_SYMBOL_GPL(regulator_list_hardware_vsel); |
| |
| /** |
| * regulator_get_linear_step - return the voltage step size between VSEL values |
| * @regulator: regulator source |
| * |
| * Returns the voltage step size between VSEL values for linear |
| * regulators, or return 0 if the regulator isn't a linear regulator. |
| */ |
| unsigned int regulator_get_linear_step(struct regulator *regulator) |
| { |
| struct regulator_dev *rdev = regulator->rdev; |
| |
| return rdev->desc->uV_step; |
| } |
| EXPORT_SYMBOL_GPL(regulator_get_linear_step); |
| |
| /** |
| * regulator_is_supported_voltage - check if a voltage range can be supported |
| * |
| * @regulator: Regulator to check. |
| * @min_uV: Minimum required voltage in uV. |
| * @max_uV: Maximum required voltage in uV. |
| * |
| * Returns a boolean or a negative error code. |
| */ |
| int regulator_is_supported_voltage(struct regulator *regulator, |
| int min_uV, int max_uV) |
| { |
| struct regulator_dev *rdev = regulator->rdev; |
| int i, voltages, ret; |
| |
| /* If we can't change voltage check the current voltage */ |
| if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) { |
| ret = regulator_get_voltage(regulator); |
| if (ret >= 0) |
| return min_uV <= ret && ret <= max_uV; |
| else |
| return ret; |
| } |
| |
| /* Any voltage within constrains range is fine? */ |
| if (rdev->desc->continuous_voltage_range) |
| return min_uV >= rdev->constraints->min_uV && |
| max_uV <= rdev->constraints->max_uV; |
| |
| ret = regulator_count_voltages(regulator); |
| if (ret < 0) |
| return ret; |
| voltages = ret; |
| |
| for (i = 0; i < voltages; i++) { |
| ret = regulator_list_voltage(regulator, i); |
| |
| if (ret >= min_uV && ret <= max_uV) |
| return 1; |
| } |
| |
| return 0; |
| } |
| EXPORT_SYMBOL_GPL(regulator_is_supported_voltage); |
| |
| static int regulator_map_voltage(struct regulator_dev *rdev, int min_uV, |
| int max_uV) |
| { |
| const struct regulator_desc *desc = rdev->desc; |
| |
| if (desc->ops->map_voltage) |
| return desc->ops->map_voltage(rdev, min_uV, max_uV); |
| |
| if (desc->ops->list_voltage == regulator_list_voltage_linear) |
| return regulator_map_voltage_linear(rdev, min_uV, max_uV); |
| |
| if (desc->ops->list_voltage == regulator_list_voltage_linear_range) |
| return regulator_map_voltage_linear_range(rdev, min_uV, max_uV); |
| |
| return regulator_map_voltage_iterate(rdev, min_uV, max_uV); |
| } |
| |
| static int _regulator_call_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV, |
| unsigned *selector) |
| { |
| struct pre_voltage_change_data data; |
| int ret; |
| |
| data.old_uV = _regulator_get_voltage(rdev); |
| data.min_uV = min_uV; |
| data.max_uV = max_uV; |
| ret = _notifier_call_chain(rdev, REGULATOR_EVENT_PRE_VOLTAGE_CHANGE, |
| &data); |
| if (ret & NOTIFY_STOP_MASK) |
| return -EINVAL; |
| |
| ret = rdev->desc->ops->set_voltage(rdev, min_uV, max_uV, selector); |
| if (ret >= 0) |
| return ret; |
| |
| _notifier_call_chain(rdev, REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE, |
| (void *)data.old_uV); |
| |
| return ret; |
| } |
| |
| static int _regulator_call_set_voltage_sel(struct regulator_dev *rdev, |
| int uV, unsigned selector) |
| { |
| struct pre_voltage_change_data data; |
| int ret; |
| |
| data.old_uV = _regulator_get_voltage(rdev); |
| data.min_uV = uV; |
| data.max_uV = uV; |
| ret = _notifier_call_chain(rdev, REGULATOR_EVENT_PRE_VOLTAGE_CHANGE, |
| &data); |
| if (ret & NOTIFY_STOP_MASK) |
| return -EINVAL; |
| |
| ret = rdev->desc->ops->set_voltage_sel(rdev, selector); |
| if (ret >= 0) |
| return ret; |
| |
| _notifier_call_chain(rdev, REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE, |
| (void *)data.old_uV); |
| |
| return ret; |
| } |
| |
| static int _regulator_set_voltage_time(struct regulator_dev *rdev, |
| int old_uV, int new_uV) |
| { |
| unsigned int ramp_delay = 0; |
| |
| if (rdev->constraints->ramp_delay) |
| ramp_delay = rdev->constraints->ramp_delay; |
| else if (rdev->desc->ramp_delay) |
| ramp_delay = rdev->desc->ramp_delay; |
| else if (rdev->constraints->settling_time) |
| return rdev->constraints->settling_time; |
| else if (rdev->constraints->settling_time_up && |
| (new_uV > old_uV)) |
| return rdev->constraints->settling_time_up; |
| else if (rdev->constraints->settling_time_down && |
| (new_uV < old_uV)) |
| return rdev->constraints->settling_time_down; |
| |
| if (ramp_delay == 0) { |
| rdev_dbg(rdev, "ramp_delay not set\n"); |
| return 0; |
| } |
| |
| return DIV_ROUND_UP(abs(new_uV - old_uV), ramp_delay); |
| } |
| |
| static int _regulator_do_set_voltage(struct regulator_dev *rdev, |
| int min_uV, int max_uV) |
| { |
| int ret; |
| int delay = 0; |
| int best_val = 0; |
| unsigned int selector; |
| int old_selector = -1; |
| const struct regulator_ops *ops = rdev->desc->ops; |
| int old_uV = _regulator_get_voltage(rdev); |
| |
| trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV); |
| |
| min_uV += rdev->constraints->uV_offset; |
| max_uV += rdev->constraints->uV_offset; |
| |
| /* |
| * If we can't obtain the old selector there is not enough |
| * info to call set_voltage_time_sel(). |
| */ |
| if (_regulator_is_enabled(rdev) && |
| ops->set_voltage_time_sel && ops->get_voltage_sel) { |
| old_selector = ops->get_voltage_sel(rdev); |
| if (old_selector < 0) |
| return old_selector; |
| } |
| |
| if (ops->set_voltage) { |
| ret = _regulator_call_set_voltage(rdev, min_uV, max_uV, |
| &selector); |
| |
| if (ret >= 0) { |
| if (ops->list_voltage) |
| best_val = ops->list_voltage(rdev, |
| selector); |
| else |
| best_val = _regulator_get_voltage(rdev); |
| } |
| |
| } else if (ops->set_voltage_sel) { |
| ret = regulator_map_voltage(rdev, min_uV, max_uV); |
| if (ret >= 0) { |
| best_val = ops->list_voltage(rdev, ret); |
| if (min_uV <= best_val && max_uV >= best_val) { |
| selector = ret; |
| if (old_selector == selector) |
| ret = 0; |
| else |
| ret = _regulator_call_set_voltage_sel( |
| rdev, best_val, selector); |
| } else { |
| ret = -EINVAL; |
| } |
| } |
| } else { |
| ret = -EINVAL; |
| } |
| |
| if (ret) |
| goto out; |
| |
| if (ops->set_voltage_time_sel) { |
| /* |
| * Call set_voltage_time_sel if successfully obtained |
| * old_selector |
| */ |
| if (old_selector >= 0 && old_selector != selector) |
| delay = ops->set_voltage_time_sel(rdev, old_selector, |
| selector); |
| } else { |
| if (old_uV != best_val) { |
| if (ops->set_voltage_time) |
| delay = ops->set_voltage_time(rdev, old_uV, |
| best_val); |
| else |
| delay = _regulator_set_voltage_time(rdev, |
| old_uV, |
| best_val); |
| } |
| } |
| |
| if (delay < 0) { |
| rdev_warn(rdev, "failed to get delay: %d\n", delay); |
| delay = 0; |
| } |
| |
| /* Insert any necessary delays */ |
| if (delay >= 1000) { |
| mdelay(delay / 1000); |
| udelay(delay % 1000); |
| } else if (delay) { |
| udelay(delay); |
| } |
| |
| if (best_val >= 0) { |
| unsigned long data = best_val; |
| |
| _notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE, |
| (void *)data); |
| } |
| |
| out: |
| trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val); |
| |
| return ret; |
| } |
| |
| static int regulator_set_voltage_unlocked(struct regulator *regulator, |
| int min_uV, int max_uV) |
| { |
| struct regulator_dev *rdev = regulator->rdev; |
| int ret = 0; |
| int old_min_uV, old_max_uV; |
| int current_uV; |
| int best_supply_uV = 0; |
| int supply_change_uV = 0; |
| |
| /* If we're setting the same range as last time the change |
| * should be a noop (some cpufreq implementations use the same |
| * voltage for multiple frequencies, for example). |
| */ |
| if (regulator->min_uV == min_uV && regulator->max_uV == max_uV) |
| goto out; |
| |
| /* If we're trying to set a range that overlaps the current voltage, |
| * return successfully even though the regulator does not support |
| * changing the voltage. |
| */ |
| if (!regulator_ops_is_valid(rdev, REGULATOR_CHANGE_VOLTAGE)) { |
| current_uV = _regulator_get_voltage(rdev); |
| if (min_uV <= current_uV && current_uV <= max_uV) { |
| regulator->min_uV = min_uV; |
| regulator->max_uV = max_uV; |
| goto out; |
| } |
| } |
| |
| /* sanity check */ |
| if (!rdev->desc->ops->set_voltage && |
| !rdev->desc->ops->set_voltage_sel) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* constraints check */ |
| ret = regulator_check_voltage(rdev, &min_uV, &max_uV); |
| if (ret < 0) |
| goto out; |
| |
| /* restore original values in case of error */ |
| old_min_uV = regulator->min_uV; |
| old_max_uV = regulator->max_uV; |
| regulator->min_uV = min_uV; |
| regulator->max_uV = max_uV; |
| |
| ret = regulator_check_consumers(rdev, &min_uV, &max_uV); |
| if (ret < 0) |
| goto out2; |
| |
| if (rdev->supply && |
| regulator_ops_is_valid(rdev->supply->rdev, |
| REGULATOR_CHANGE_VOLTAGE) && |
| (rdev->desc->min_dropout_uV || !(rdev->desc->ops->get_voltage || |
| rdev->desc->ops->get_voltage_sel))) { |
| int current_supply_uV; |
| int selector; |
| |
| selector = regulator_map_voltage(rdev, min_uV, max_uV); |
| if (selector < 0) { |
| ret = selector; |
| goto out2; |
| } |
| |
| best_supply_uV = _regulator_list_voltage(regulator, selector, 0); |
| if (best_supply_uV < 0) { |
| ret = best_supply_uV; |
| goto out2; |
| } |
| |
| best_supply_uV += rdev->desc->min_dropout_uV; |
| |
| current_supply_uV = _regulator_get_voltage(rdev->supply->rdev); |
| if (current_supply_uV < 0) { |
| ret = current_supply_uV; |
| goto out2; |
| } |
| |
| supply_change_uV = best_supply_uV - current_supply_uV; |
| } |
| |
| if (supply_change_uV > 0) { |
| ret = regulator_set_voltage_unlocked(rdev->supply, |
| best_supply_uV, INT_MAX); |
| if (ret) { |
| dev_err(&rdev->dev, "Failed to increase supply voltage: %d\n", |
| ret); |
| goto out2; |
| } |
| } |
| |
| ret = _regulator_do_set_voltage(rdev, min_uV, max_uV); |
| if (ret < 0) |
| goto out2; |
| |
| if (supply_change_uV < 0) { |
| ret = regulator_set_voltage_unlocked(rdev->supply, |
| best_supply_uV, INT_MAX); |
| if (ret) |
| dev_warn(&rdev->dev, "Failed to decrease supply voltage: %d\n", |
| ret); |
| /* No need to fail here */ |
| ret = 0; |
| } |
| |
| out: |
| return ret; |
| out2: |
| regulator->min_uV = old_min_uV; |
| regulator->max_uV = old_max_uV; |
| |
| return ret; |
| } |
| |
| /** |
| * regulator_set_voltage - set regulator output voltage |
| * @regulator: regulator source |
| * @min_uV: Minimum required voltage in uV |
| * @max_uV: Maximum acceptable voltage in uV |
| * |
| * Sets a voltage regulator to the desired output voltage. This can be set |
| * during any regulator state. IOW, regulator can be disabled or enabled. |
| * |
| * If the regulator is enabled then the voltage will change to the new value |
| * immediately otherwise if the regulator is disabled the regulator will |
| * output at the new voltage when enabled. |
| * |
| * NOTE: If the regulator is shared between several devices then the lowest |
| * request voltage that meets the system constraints will be used. |
| * Regulator system constraints must be set for this regulator before |
| * calling this function otherwise this call will fail. |
| */ |
| int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV) |
| { |
| int ret = 0; |
| |
| regulator_lock_supply(regulator->rdev); |
| |
| ret = regulator_set_voltage_unlocked(regulator, min_uV, max_uV); |
| |
| regulator_unlock_supply(regulator->rdev); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(regulator_set_voltage); |
| |
| /** |
| * regulator_set_voltage_time - get raise/fall time |
| * @regulator: regulator source |
| * @old_uV: starting voltage in microvolts |
| * @new_uV: target voltage in microvolts |
| * |
| * Provided with the starting and ending voltage, this function attempts to |
| * calculate the time in microseconds required to rise or fall to this new |
| * voltage. |
| */ |
| int regulator_set_voltage_time(struct regulator *regulator, |
| int old_uV, int new_uV) |
| { |
| struct regulator_dev *rdev = regulator->rdev; |
| const struct regulator_ops *ops = rdev->desc->ops; |
| int old_sel = -1; |
| int new_sel = -1; |
| int voltage; |
| int i; |
| |
| if (ops->set_voltage_time) |
| return ops->set_voltage_time(rdev, old_uV, new_uV); |
| else if (!ops->set_voltage_time_sel) |
| return _regulator_set_voltage_time(rdev, old_uV, new_uV); |
| |
| /* Currently requires operations to do this */ |
| if (!ops->list_voltage || !rdev->desc->n_voltages) |
| return -EINVAL; |
| |
| for (i = 0; i < rdev->desc->n_voltages; i++) { |
| /* We only look for exact voltage matches here */ |
| voltage = regulator_list_voltage(regulator, i); |
| if (voltage < 0) |
| return -EINVAL; |
| if (voltage == 0) |
| continue; |
| if (voltage == old_uV) |
| old_sel = i; |
| if (voltage == new_uV) |
| new_sel = i; |
| } |
| |
| if (old_sel < 0 || new_sel < 0) |
| return -EINVAL; |
| |
| return ops->set_voltage_time_sel(rdev, old_sel, new_sel); |
| } |
| EXPORT_SYMBOL_GPL(regulator_set_voltage_time); |
| |
| /** |
| * regulator_set_voltage_time_sel - get raise/fall time |
| * @rdev: regulator source device |
| * @old_selector: selector for starting voltage |
| * @new_selector: selector for target voltage |
| * |
| * Provided with the starting and target voltage selectors, this function |
| * returns time in microseconds required to rise or fall to this new voltage |
| * |
| * Drivers providing ramp_delay in regulation_constraints can use this as their |
| * set_voltage_time_sel() operation. |
| */ |
| int regulator_set_voltage_time_sel(struct regulator_dev *rdev, |
| unsigned int old_selector, |
| unsigned int new_selector) |
| { |
| int old_volt, new_volt; |
| |
| /* sanity check */ |
| if (!rdev->desc->ops->list_voltage) |
| return -EINVAL; |
| |
| old_volt = rdev->desc->ops->list_voltage(rdev, old_selector); |
| new_volt = rdev->desc->ops->list_voltage(rdev, new_selector); |
| |
| if (rdev->desc->ops->set_voltage_time) |
| return rdev->desc->ops->set_voltage_time(rdev, old_volt, |
| new_volt); |
| else |
| return _regulator_set_voltage_time(rdev, old_volt, new_volt); |
| } |
| EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel); |
| |
| /** |
| * regulator_sync_voltage - re-apply last regulator output voltage |
| * @regulator: regulator source |
| * |
| * Re-apply the last configured voltage. This is intended to be used |
| * where some external control source the consumer is cooperating with |
| * has caused the configured voltage to change. |
| */ |
| int regulator_sync_voltage(struct regulator *regulator) |
| { |
| struct regulator_dev *rdev = regulator->rdev;
|