| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2004-2006 Silicon Graphics, Inc. All rights reserved. |
| * |
| * SGI Altix topology and hardware performance monitoring API. |
| * Mark Goodwin <markgw@sgi.com>. |
| * |
| * Creates /proc/sgi_sn/sn_topology (read-only) to export |
| * info about Altix nodes, routers, CPUs and NumaLink |
| * interconnection/topology. |
| * |
| * Also creates a dynamic misc device named "sn_hwperf" |
| * that supports an ioctl interface to call down into SAL |
| * to discover hw objects, topology and to read/write |
| * memory mapped registers, e.g. for performance monitoring. |
| * The "sn_hwperf" device is registered only after the procfs |
| * file is first opened, i.e. only if/when it's needed. |
| * |
| * This API is used by SGI Performance Co-Pilot and other |
| * tools, see http://oss.sgi.com/projects/pcp |
| */ |
| |
| #include <linux/fs.h> |
| #include <linux/slab.h> |
| #include <linux/export.h> |
| #include <linux/vmalloc.h> |
| #include <linux/seq_file.h> |
| #include <linux/miscdevice.h> |
| #include <linux/utsname.h> |
| #include <linux/cpumask.h> |
| #include <linux/nodemask.h> |
| #include <linux/smp.h> |
| #include <linux/mutex.h> |
| |
| #include <asm/processor.h> |
| #include <asm/topology.h> |
| #include <linux/uaccess.h> |
| #include <asm/sal.h> |
| #include <asm/sn/io.h> |
| #include <asm/sn/sn_sal.h> |
| #include <asm/sn/module.h> |
| #include <asm/sn/geo.h> |
| #include <asm/sn/sn2/sn_hwperf.h> |
| #include <asm/sn/addrs.h> |
| |
| static void *sn_hwperf_salheap = NULL; |
| static int sn_hwperf_obj_cnt = 0; |
| static nasid_t sn_hwperf_master_nasid = INVALID_NASID; |
| static int sn_hwperf_init(void); |
| static DEFINE_MUTEX(sn_hwperf_init_mutex); |
| |
| #define cnode_possible(n) ((n) < num_cnodes) |
| |
| static int sn_hwperf_enum_objects(int *nobj, struct sn_hwperf_object_info **ret) |
| { |
| int e; |
| u64 sz; |
| struct sn_hwperf_object_info *objbuf = NULL; |
| |
| if ((e = sn_hwperf_init()) < 0) { |
| printk(KERN_ERR "sn_hwperf_init failed: err %d\n", e); |
| goto out; |
| } |
| |
| sz = sn_hwperf_obj_cnt * sizeof(struct sn_hwperf_object_info); |
| objbuf = vmalloc(sz); |
| if (objbuf == NULL) { |
| printk("sn_hwperf_enum_objects: vmalloc(%d) failed\n", (int)sz); |
| e = -ENOMEM; |
| goto out; |
| } |
| |
| e = ia64_sn_hwperf_op(sn_hwperf_master_nasid, SN_HWPERF_ENUM_OBJECTS, |
| 0, sz, (u64) objbuf, 0, 0, NULL); |
| if (e != SN_HWPERF_OP_OK) { |
| e = -EINVAL; |
| vfree(objbuf); |
| } |
| |
| out: |
| *nobj = sn_hwperf_obj_cnt; |
| *ret = objbuf; |
| return e; |
| } |
| |
| static int sn_hwperf_location_to_bpos(char *location, |
| int *rack, int *bay, int *slot, int *slab) |
| { |
| char type; |
| |
| /* first scan for an old style geoid string */ |
| if (sscanf(location, "%03d%c%02d#%d", |
| rack, &type, bay, slab) == 4) |
| *slot = 0; |
| else /* scan for a new bladed geoid string */ |
| if (sscanf(location, "%03d%c%02d^%02d#%d", |
| rack, &type, bay, slot, slab) != 5) |
| return -1; |
| /* success */ |
| return 0; |
| } |
| |
| static int sn_hwperf_geoid_to_cnode(char *location) |
| { |
| int cnode; |
| geoid_t geoid; |
| moduleid_t module_id; |
| int rack, bay, slot, slab; |
| int this_rack, this_bay, this_slot, this_slab; |
| |
| if (sn_hwperf_location_to_bpos(location, &rack, &bay, &slot, &slab)) |
| return -1; |
| |
| /* |
| * FIXME: replace with cleaner for_each_XXX macro which addresses |
| * both compute and IO nodes once ACPI3.0 is available. |
| */ |
| for (cnode = 0; cnode < num_cnodes; cnode++) { |
| geoid = cnodeid_get_geoid(cnode); |
| module_id = geo_module(geoid); |
| this_rack = MODULE_GET_RACK(module_id); |
| this_bay = MODULE_GET_BPOS(module_id); |
| this_slot = geo_slot(geoid); |
| this_slab = geo_slab(geoid); |
| if (rack == this_rack && bay == this_bay && |
| slot == this_slot && slab == this_slab) { |
| break; |
| } |
| } |
| |
| return cnode_possible(cnode) ? cnode : -1; |
| } |
| |
| static int sn_hwperf_obj_to_cnode(struct sn_hwperf_object_info * obj) |
| { |
| if (!SN_HWPERF_IS_NODE(obj) && !SN_HWPERF_IS_IONODE(obj)) |
| BUG(); |
| if (SN_HWPERF_FOREIGN(obj)) |
| return -1; |
| return sn_hwperf_geoid_to_cnode(obj->location); |
| } |
| |
| static int sn_hwperf_generic_ordinal(struct sn_hwperf_object_info *obj, |
| struct sn_hwperf_object_info *objs) |
| { |
| int ordinal; |
| struct sn_hwperf_object_info *p; |
| |
| for (ordinal=0, p=objs; p != obj; p++) { |
| if (SN_HWPERF_FOREIGN(p)) |
| continue; |
| if (SN_HWPERF_SAME_OBJTYPE(p, obj)) |
| ordinal++; |
| } |
| |
| return ordinal; |
| } |
| |
| static const char *slabname_node = "node"; /* SHub asic */ |
| static const char *slabname_ionode = "ionode"; /* TIO asic */ |
| static const char *slabname_router = "router"; /* NL3R or NL4R */ |
| static const char *slabname_other = "other"; /* unknown asic */ |
| |
| static const char *sn_hwperf_get_slabname(struct sn_hwperf_object_info *obj, |
| struct sn_hwperf_object_info *objs, int *ordinal) |
| { |
| int isnode; |
| const char *slabname = slabname_other; |
| |
| if ((isnode = SN_HWPERF_IS_NODE(obj)) || SN_HWPERF_IS_IONODE(obj)) { |
| slabname = isnode ? slabname_node : slabname_ionode; |
| *ordinal = sn_hwperf_obj_to_cnode(obj); |
| } |
| else { |
| *ordinal = sn_hwperf_generic_ordinal(obj, objs); |
| if (SN_HWPERF_IS_ROUTER(obj)) |
| slabname = slabname_router; |
| } |
| |
| return slabname; |
| } |
| |
| static void print_pci_topology(struct seq_file *s) |
| { |
| char *p; |
| size_t sz; |
| int e; |
| |
| for (sz = PAGE_SIZE; sz < 16 * PAGE_SIZE; sz += PAGE_SIZE) { |
| if (!(p = kmalloc(sz, GFP_KERNEL))) |
| break; |
| e = ia64_sn_ioif_get_pci_topology(__pa(p), sz); |
| if (e == SALRET_OK) |
| seq_puts(s, p); |
| kfree(p); |
| if (e == SALRET_OK || e == SALRET_NOT_IMPLEMENTED) |
| break; |
| } |
| } |
| |
| static inline int sn_hwperf_has_cpus(cnodeid_t node) |
| { |
| return node < MAX_NUMNODES && node_online(node) && nr_cpus_node(node); |
| } |
| |
| static inline int sn_hwperf_has_mem(cnodeid_t node) |
| { |
| return node < MAX_NUMNODES && node_online(node) && NODE_DATA(node)->node_present_pages; |
| } |
| |
| static struct sn_hwperf_object_info * |
| sn_hwperf_findobj_id(struct sn_hwperf_object_info *objbuf, |
| int nobj, int id) |
| { |
| int i; |
| struct sn_hwperf_object_info *p = objbuf; |
| |
| for (i=0; i < nobj; i++, p++) { |
| if (p->id == id) |
| return p; |
| } |
| |
| return NULL; |
| |
| } |
| |
| static int sn_hwperf_get_nearest_node_objdata(struct sn_hwperf_object_info *objbuf, |
| int nobj, cnodeid_t node, cnodeid_t *near_mem_node, cnodeid_t *near_cpu_node) |
| { |
| int e; |
| struct sn_hwperf_object_info *nodeobj = NULL; |
| struct sn_hwperf_object_info *op; |
| struct sn_hwperf_object_info *dest; |
| struct sn_hwperf_object_info *router; |
| struct sn_hwperf_port_info ptdata[16]; |
| int sz, i, j; |
| cnodeid_t c; |
| int found_mem = 0; |
| int found_cpu = 0; |
| |
| if (!cnode_possible(node)) |
| return -EINVAL; |
| |
| if (sn_hwperf_has_cpus(node)) { |
| if (near_cpu_node) |
| *near_cpu_node = node; |
| found_cpu++; |
| } |
| |
| if (sn_hwperf_has_mem(node)) { |
| if (near_mem_node) |
| *near_mem_node = node; |
| found_mem++; |
| } |
| |
| if (found_cpu && found_mem) |
| return 0; /* trivially successful */ |
| |
| /* find the argument node object */ |
| for (i=0, op=objbuf; i < nobj; i++, op++) { |
| if (!SN_HWPERF_IS_NODE(op) && !SN_HWPERF_IS_IONODE(op)) |
| continue; |
| if (node == sn_hwperf_obj_to_cnode(op)) { |
| nodeobj = op; |
| break; |
| } |
| } |
| if (!nodeobj) { |
| e = -ENOENT; |
| goto err; |
| } |
| |
| /* get it's interconnect topology */ |
| sz = op->ports * sizeof(struct sn_hwperf_port_info); |
| BUG_ON(sz > sizeof(ptdata)); |
| e = ia64_sn_hwperf_op(sn_hwperf_master_nasid, |
| SN_HWPERF_ENUM_PORTS, nodeobj->id, sz, |
| (u64)&ptdata, 0, 0, NULL); |
| if (e != SN_HWPERF_OP_OK) { |
| e = -EINVAL; |
| goto err; |
| } |
| |
| /* find nearest node with cpus and nearest memory */ |
| for (router=NULL, j=0; j < op->ports; j++) { |
| dest = sn_hwperf_findobj_id(objbuf, nobj, ptdata[j].conn_id); |
| if (dest && SN_HWPERF_IS_ROUTER(dest)) |
| router = dest; |
| if (!dest || SN_HWPERF_FOREIGN(dest) || |
| !SN_HWPERF_IS_NODE(dest) || SN_HWPERF_IS_IONODE(dest)) { |
| continue; |
| } |
| c = sn_hwperf_obj_to_cnode(dest); |
| if (!found_cpu && sn_hwperf_has_cpus(c)) { |
| if (near_cpu_node) |
| *near_cpu_node = c; |
| found_cpu++; |
| } |
| if (!found_mem && sn_hwperf_has_mem(c)) { |
| if (near_mem_node) |
| *near_mem_node = c; |
| found_mem++; |
| } |
| } |
| |
| if (router && (!found_cpu || !found_mem)) { |
| /* search for a node connected to the same router */ |
| sz = router->ports * sizeof(struct sn_hwperf_port_info); |
| BUG_ON(sz > sizeof(ptdata)); |
| e = ia64_sn_hwperf_op(sn_hwperf_master_nasid, |
| SN_HWPERF_ENUM_PORTS, router->id, sz, |
| (u64)&ptdata, 0, 0, NULL); |
| if (e != SN_HWPERF_OP_OK) { |
| e = -EINVAL; |
| goto err; |
| } |
| for (j=0; j < router->ports; j++) { |
| dest = sn_hwperf_findobj_id(objbuf, nobj, |
| ptdata[j].conn_id); |
| if (!dest || dest->id == node || |
| SN_HWPERF_FOREIGN(dest) || |
| !SN_HWPERF_IS_NODE(dest) || |
| SN_HWPERF_IS_IONODE(dest)) { |
| continue; |
| } |
| c = sn_hwperf_obj_to_cnode(dest); |
| if (!found_cpu && sn_hwperf_has_cpus(c)) { |
| if (near_cpu_node) |
| *near_cpu_node = c; |
| found_cpu++; |
| } |
| if (!found_mem && sn_hwperf_has_mem(c)) { |
| if (near_mem_node) |
| *near_mem_node = c; |
| found_mem++; |
| } |
| if (found_cpu && found_mem) |
| break; |
| } |
| } |
| |
| if (!found_cpu || !found_mem) { |
| /* resort to _any_ node with CPUs and memory */ |
| for (i=0, op=objbuf; i < nobj; i++, op++) { |
| if (SN_HWPERF_FOREIGN(op) || |
| SN_HWPERF_IS_IONODE(op) || |
| !SN_HWPERF_IS_NODE(op)) { |
| continue; |
| } |
| c = sn_hwperf_obj_to_cnode(op); |
| if (!found_cpu && sn_hwperf_has_cpus(c)) { |
| if (near_cpu_node) |
| *near_cpu_node = c; |
| found_cpu++; |
| } |
| if (!found_mem && sn_hwperf_has_mem(c)) { |
| if (near_mem_node) |
| *near_mem_node = c; |
| found_mem++; |
| } |
| if (found_cpu && found_mem) |
| break; |
| } |
| } |
| |
| if (!found_cpu || !found_mem) |
| e = -ENODATA; |
| |
| err: |
| return e; |
| } |
| |
| |
| static int sn_topology_show(struct seq_file *s, void *d) |
| { |
| int sz; |
| int pt; |
| int e = 0; |
| int i; |
| int j; |
| const char *slabname; |
| int ordinal; |
| char slice; |
| struct cpuinfo_ia64 *c; |
| struct sn_hwperf_port_info *ptdata; |
| struct sn_hwperf_object_info *p; |
| struct sn_hwperf_object_info *obj = d; /* this object */ |
| struct sn_hwperf_object_info *objs = s->private; /* all objects */ |
| u8 shubtype; |
| u8 system_size; |
| u8 sharing_size; |
| u8 partid; |
| u8 coher; |
| u8 nasid_shift; |
| u8 region_size; |
| u16 nasid_mask; |
| int nasid_msb; |
| |
| if (obj == objs) { |
| seq_printf(s, "# sn_topology version 2\n"); |
| seq_printf(s, "# objtype ordinal location partition" |
| " [attribute value [, ...]]\n"); |
| |
| if (ia64_sn_get_sn_info(0, |
| &shubtype, &nasid_mask, &nasid_shift, &system_size, |
| &sharing_size, &partid, &coher, ®ion_size)) |
| BUG(); |
| for (nasid_msb=63; nasid_msb > 0; nasid_msb--) { |
| if (((u64)nasid_mask << nasid_shift) & (1ULL << nasid_msb)) |
| break; |
| } |
| seq_printf(s, "partition %u %s local " |
| "shubtype %s, " |
| "nasid_mask 0x%016llx, " |
| "nasid_bits %d:%d, " |
| "system_size %d, " |
| "sharing_size %d, " |
| "coherency_domain %d, " |
| "region_size %d\n", |
| |
| partid, utsname()->nodename, |
| shubtype ? "shub2" : "shub1", |
| (u64)nasid_mask << nasid_shift, nasid_msb, nasid_shift, |
| system_size, sharing_size, coher, region_size); |
| |
| print_pci_topology(s); |
| } |
| |
| if (SN_HWPERF_FOREIGN(obj)) { |
| /* private in another partition: not interesting */ |
| return 0; |
| } |
| |
| for (i = 0; i < SN_HWPERF_MAXSTRING && obj->name[i]; i++) { |
| if (obj->name[i] == ' ') |
| obj->name[i] = '_'; |
| } |
| |
| slabname = sn_hwperf_get_slabname(obj, objs, &ordinal); |
| seq_printf(s, "%s %d %s %s asic %s", slabname, ordinal, obj->location, |
| obj->sn_hwp_this_part ? "local" : "shared", obj->name); |
| |
| if (ordinal < 0 || (!SN_HWPERF_IS_NODE(obj) && !SN_HWPERF_IS_IONODE(obj))) |
| seq_putc(s, '\n'); |
| else { |
| cnodeid_t near_mem = -1; |
| cnodeid_t near_cpu = -1; |
| |
| seq_printf(s, ", nasid 0x%x", cnodeid_to_nasid(ordinal)); |
| |
| if (sn_hwperf_get_nearest_node_objdata(objs, sn_hwperf_obj_cnt, |
| ordinal, &near_mem, &near_cpu) == 0) { |
| seq_printf(s, ", near_mem_nodeid %d, near_cpu_nodeid %d", |
| near_mem, near_cpu); |
| } |
| |
| if (!SN_HWPERF_IS_IONODE(obj)) { |
| for_each_online_node(i) { |
| seq_printf(s, i ? ":%d" : ", dist %d", |
| node_distance(ordinal, i)); |
| } |
| } |
| |
| seq_putc(s, '\n'); |
| |
| /* |
| * CPUs on this node, if any |
| */ |
| if (!SN_HWPERF_IS_IONODE(obj)) { |
| for_each_cpu_and(i, cpu_online_mask, |
| cpumask_of_node(ordinal)) { |
| slice = 'a' + cpuid_to_slice(i); |
| c = cpu_data(i); |
| seq_printf(s, "cpu %d %s%c local" |
| " freq %luMHz, arch ia64", |
| i, obj->location, slice, |
| c->proc_freq / 1000000); |
| for_each_online_cpu(j) { |
| seq_printf(s, j ? ":%d" : ", dist %d", |
| node_distance( |
| cpu_to_node(i), |
| cpu_to_node(j))); |
| } |
| seq_putc(s, '\n'); |
| } |
| } |
| } |
| |
| if (obj->ports) { |
| /* |
| * numalink ports |
| */ |
| sz = obj->ports * sizeof(struct sn_hwperf_port_info); |
| if ((ptdata = kmalloc(sz, GFP_KERNEL)) == NULL) |
| return -ENOMEM; |
| e = ia64_sn_hwperf_op(sn_hwperf_master_nasid, |
| SN_HWPERF_ENUM_PORTS, obj->id, sz, |
| (u64) ptdata, 0, 0, NULL); |
| if (e != SN_HWPERF_OP_OK) |
| return -EINVAL; |
| for (ordinal=0, p=objs; p != obj; p++) { |
| if (!SN_HWPERF_FOREIGN(p)) |
| ordinal += p->ports; |
| } |
| for (pt = 0; pt < obj->ports; pt++) { |
| for (p = objs, i = 0; i < sn_hwperf_obj_cnt; i++, p++) { |
| if (ptdata[pt].conn_id == p->id) { |
| break; |
| } |
| } |
| seq_printf(s, "numalink %d %s-%d", |
| ordinal+pt, obj->location, ptdata[pt].port); |
| |
| if (i >= sn_hwperf_obj_cnt) { |
| /* no connection */ |
| seq_puts(s, " local endpoint disconnected" |
| ", protocol unknown\n"); |
| continue; |
| } |
| |
| if (obj->sn_hwp_this_part && p->sn_hwp_this_part) |
| /* both ends local to this partition */ |
| seq_puts(s, " local"); |
| else if (SN_HWPERF_FOREIGN(p)) |
| /* both ends of the link in foreign partition */ |
| seq_puts(s, " foreign"); |
| else |
| /* link straddles a partition */ |
| seq_puts(s, " shared"); |
| |
| /* |
| * Unlikely, but strictly should query the LLP config |
| * registers because an NL4R can be configured to run |
| * NL3 protocol, even when not talking to an NL3 router. |
| * Ditto for node-node. |
| */ |
| seq_printf(s, " endpoint %s-%d, protocol %s\n", |
| p->location, ptdata[pt].conn_port, |
| (SN_HWPERF_IS_NL3ROUTER(obj) || |
| SN_HWPERF_IS_NL3ROUTER(p)) ? "LLP3" : "LLP4"); |
| } |
| kfree(ptdata); |
| } |
| |
| return 0; |
| } |
| |
| static void *sn_topology_start(struct seq_file *s, loff_t * pos) |
| { |
| struct sn_hwperf_object_info *objs = s->private; |
| |
| if (*pos < sn_hwperf_obj_cnt) |
| return (void *)(objs + *pos); |
| |
| return NULL; |
| } |
| |
| static void *sn_topology_next(struct seq_file *s, void *v, loff_t * pos) |
| { |
| ++*pos; |
| return sn_topology_start(s, pos); |
| } |
| |
| static void sn_topology_stop(struct seq_file *m, void *v) |
| { |
| return; |
| } |
| |
| /* |
| * /proc/sgi_sn/sn_topology, read-only using seq_file |
| */ |
| static const struct seq_operations sn_topology_seq_ops = { |
| .start = sn_topology_start, |
| .next = sn_topology_next, |
| .stop = sn_topology_stop, |
| .show = sn_topology_show |
| }; |
| |
| struct sn_hwperf_op_info { |
| u64 op; |
| struct sn_hwperf_ioctl_args *a; |
| void *p; |
| int *v0; |
| int ret; |
| }; |
| |
| static void sn_hwperf_call_sal(void *info) |
| { |
| struct sn_hwperf_op_info *op_info = info; |
| int r; |
| |
| r = ia64_sn_hwperf_op(sn_hwperf_master_nasid, op_info->op, |
| op_info->a->arg, op_info->a->sz, |
| (u64) op_info->p, 0, 0, op_info->v0); |
| op_info->ret = r; |
| } |
| |
| static long sn_hwperf_call_sal_work(void *info) |
| { |
| sn_hwperf_call_sal(info); |
| return 0; |
| } |
| |
| static int sn_hwperf_op_cpu(struct sn_hwperf_op_info *op_info) |
| { |
| u32 cpu; |
| u32 use_ipi; |
| int r = 0; |
| |
| cpu = (op_info->a->arg & SN_HWPERF_ARG_CPU_MASK) >> 32; |
| use_ipi = op_info->a->arg & SN_HWPERF_ARG_USE_IPI_MASK; |
| op_info->a->arg &= SN_HWPERF_ARG_OBJID_MASK; |
| |
| if (cpu != SN_HWPERF_ARG_ANY_CPU) { |
| if (cpu >= nr_cpu_ids || !cpu_online(cpu)) { |
| r = -EINVAL; |
| goto out; |
| } |
| } |
| |
| if (cpu == SN_HWPERF_ARG_ANY_CPU) { |
| /* don't care which cpu */ |
| sn_hwperf_call_sal(op_info); |
| } else if (cpu == get_cpu()) { |
| /* already on correct cpu */ |
| sn_hwperf_call_sal(op_info); |
| put_cpu(); |
| } else { |
| put_cpu(); |
| if (use_ipi) { |
| /* use an interprocessor interrupt to call SAL */ |
| smp_call_function_single(cpu, sn_hwperf_call_sal, |
| op_info, 1); |
| } else { |
| /* Call on the target CPU */ |
| work_on_cpu_safe(cpu, sn_hwperf_call_sal_work, op_info); |
| } |
| } |
| r = op_info->ret; |
| |
| out: |
| return r; |
| } |
| |
| /* map SAL hwperf error code to system error code */ |
| static int sn_hwperf_map_err(int hwperf_err) |
| { |
| int e; |
| |
| switch(hwperf_err) { |
| case SN_HWPERF_OP_OK: |
| e = 0; |
| break; |
| |
| case SN_HWPERF_OP_NOMEM: |
| e = -ENOMEM; |
| break; |
| |
| case SN_HWPERF_OP_NO_PERM: |
| e = -EPERM; |
| break; |
| |
| case SN_HWPERF_OP_IO_ERROR: |
| e = -EIO; |
| break; |
| |
| case SN_HWPERF_OP_BUSY: |
| e = -EBUSY; |
| break; |
| |
| case SN_HWPERF_OP_RECONFIGURE: |
| e = -EAGAIN; |
| break; |
| |
| case SN_HWPERF_OP_INVAL: |
| default: |
| e = -EINVAL; |
| break; |
| } |
| |
| return e; |
| } |
| |
| /* |
| * ioctl for "sn_hwperf" misc device |
| */ |
| static long sn_hwperf_ioctl(struct file *fp, u32 op, unsigned long arg) |
| { |
| struct sn_hwperf_ioctl_args a; |
| struct cpuinfo_ia64 *cdata; |
| struct sn_hwperf_object_info *objs; |
| struct sn_hwperf_object_info *cpuobj; |
| struct sn_hwperf_op_info op_info; |
| void *p = NULL; |
| int nobj; |
| char slice; |
| int node; |
| int r; |
| int v0; |
| int i; |
| int j; |
| |
| /* only user requests are allowed here */ |
| if ((op & SN_HWPERF_OP_MASK) < 10) { |
| r = -EINVAL; |
| goto error; |
| } |
| r = copy_from_user(&a, (const void __user *)arg, |
| sizeof(struct sn_hwperf_ioctl_args)); |
| if (r != 0) { |
| r = -EFAULT; |
| goto error; |
| } |
| |
| /* |
| * Allocate memory to hold a kernel copy of the user buffer. The |
| * buffer contents are either copied in or out (or both) of user |
| * space depending on the flags encoded in the requested operation. |
| */ |
| if (a.ptr) { |
| p = vmalloc(a.sz); |
| if (!p) { |
| r = -ENOMEM; |
| goto error; |
| } |
| } |
| |
| if (op & SN_HWPERF_OP_MEM_COPYIN) { |
| r = copy_from_user(p, (const void __user *)a.ptr, a.sz); |
| if (r != 0) { |
| r = -EFAULT; |
| goto error; |
| } |
| } |
| |
| switch (op) { |
| case SN_HWPERF_GET_CPU_INFO: |
| if (a.sz == sizeof(u64)) { |
| /* special case to get size needed */ |
| *(u64 *) p = (u64) num_online_cpus() * |
| sizeof(struct sn_hwperf_object_info); |
| } else |
| if (a.sz < num_online_cpus() * sizeof(struct sn_hwperf_object_info)) { |
| r = -ENOMEM; |
| goto error; |
| } else |
| if ((r = sn_hwperf_enum_objects(&nobj, &objs)) == 0) { |
| int cpuobj_index = 0; |
| |
| memset(p, 0, a.sz); |
| for (i = 0; i < nobj; i++) { |
| if (!SN_HWPERF_IS_NODE(objs + i)) |
| continue; |
| node = sn_hwperf_obj_to_cnode(objs + i); |
| for_each_online_cpu(j) { |
| if (node != cpu_to_node(j)) |
| continue; |
| cpuobj = (struct sn_hwperf_object_info *) p + cpuobj_index++; |
| slice = 'a' + cpuid_to_slice(j); |
| cdata = cpu_data(j); |
| cpuobj->id = j; |
| snprintf(cpuobj->name, |
| sizeof(cpuobj->name), |
| "CPU %luMHz %s", |
| cdata->proc_freq / 1000000, |
| cdata->vendor); |
| snprintf(cpuobj->location, |
| sizeof(cpuobj->location), |
| "%s%c", objs[i].location, |
| slice); |
| } |
| } |
| |
| vfree(objs); |
| } |
| break; |
| |
| case SN_HWPERF_GET_NODE_NASID: |
| if (a.sz != sizeof(u64) || |
| (node = a.arg) < 0 || !cnode_possible(node)) { |
| r = -EINVAL; |
| goto error; |
| } |
| *(u64 *)p = (u64)cnodeid_to_nasid(node); |
| break; |
| |
| case SN_HWPERF_GET_OBJ_NODE: |
| i = a.arg; |
| if (a.sz != sizeof(u64) || i < 0) { |
| r = -EINVAL; |
| goto error; |
| } |
| if ((r = sn_hwperf_enum_objects(&nobj, &objs)) == 0) { |
| if (i >= nobj) { |
| r = -EINVAL; |
| vfree(objs); |
| goto error; |
| } |
| if (objs[i].id != a.arg) { |
| for (i = 0; i < nobj; i++) { |
| if (objs[i].id == a.arg) |
| break; |
| } |
| } |
| if (i == nobj) { |
| r = -EINVAL; |
| vfree(objs); |
| goto error; |
| } |
| |
| if (!SN_HWPERF_IS_NODE(objs + i) && |
| !SN_HWPERF_IS_IONODE(objs + i)) { |
| r = -ENOENT; |
| vfree(objs); |
| goto error; |
| } |
| |
| *(u64 *)p = (u64)sn_hwperf_obj_to_cnode(objs + i); |
| vfree(objs); |
| } |
| break; |
| |
| case SN_HWPERF_GET_MMRS: |
| case SN_HWPERF_SET_MMRS: |
| case SN_HWPERF_OBJECT_DISTANCE: |
| op_info.p = p; |
| op_info.a = &a; |
| op_info.v0 = &v0; |
| op_info.op = op; |
| r = sn_hwperf_op_cpu(&op_info); |
| if (r) { |
| r = sn_hwperf_map_err(r); |
| a.v0 = v0; |
| goto error; |
| } |
| break; |
| |
| default: |
| /* all other ops are a direct SAL call */ |
| r = ia64_sn_hwperf_op(sn_hwperf_master_nasid, op, |
| a.arg, a.sz, (u64) p, 0, 0, &v0); |
| if (r) { |
| r = sn_hwperf_map_err(r); |
| goto error; |
| } |
| a.v0 = v0; |
| break; |
| } |
| |
| if (op & SN_HWPERF_OP_MEM_COPYOUT) { |
| r = copy_to_user((void __user *)a.ptr, p, a.sz); |
| if (r != 0) { |
| r = -EFAULT; |
| goto error; |
| } |
| } |
| |
| error: |
| vfree(p); |
| |
| return r; |
| } |
| |
| static const struct file_operations sn_hwperf_fops = { |
| .unlocked_ioctl = sn_hwperf_ioctl, |
| .llseek = noop_llseek, |
| }; |
| |
| static struct miscdevice sn_hwperf_dev = { |
| MISC_DYNAMIC_MINOR, |
| "sn_hwperf", |
| &sn_hwperf_fops |
| }; |
| |
| static int sn_hwperf_init(void) |
| { |
| u64 v; |
| int salr; |
| int e = 0; |
| |
| /* single threaded, once-only initialization */ |
| mutex_lock(&sn_hwperf_init_mutex); |
| |
| if (sn_hwperf_salheap) { |
| mutex_unlock(&sn_hwperf_init_mutex); |
| return e; |
| } |
| |
| /* |
| * The PROM code needs a fixed reference node. For convenience the |
| * same node as the console I/O is used. |
| */ |
| sn_hwperf_master_nasid = (nasid_t) ia64_sn_get_console_nasid(); |
| |
| /* |
| * Request the needed size and install the PROM scratch area. |
| * The PROM keeps various tracking bits in this memory area. |
| */ |
| salr = ia64_sn_hwperf_op(sn_hwperf_master_nasid, |
| (u64) SN_HWPERF_GET_HEAPSIZE, 0, |
| (u64) sizeof(u64), (u64) &v, 0, 0, NULL); |
| if (salr != SN_HWPERF_OP_OK) { |
| e = -EINVAL; |
| goto out; |
| } |
| |
| if ((sn_hwperf_salheap = vmalloc(v)) == NULL) { |
| e = -ENOMEM; |
| goto out; |
| } |
| salr = ia64_sn_hwperf_op(sn_hwperf_master_nasid, |
| SN_HWPERF_INSTALL_HEAP, 0, v, |
| (u64) sn_hwperf_salheap, 0, 0, NULL); |
| if (salr != SN_HWPERF_OP_OK) { |
| e = -EINVAL; |
| goto out; |
| } |
| |
| salr = ia64_sn_hwperf_op(sn_hwperf_master_nasid, |
| SN_HWPERF_OBJECT_COUNT, 0, |
| sizeof(u64), (u64) &v, 0, 0, NULL); |
| if (salr != SN_HWPERF_OP_OK) { |
| e = -EINVAL; |
| goto out; |
| } |
| sn_hwperf_obj_cnt = (int)v; |
| |
| out: |
| if (e < 0 && sn_hwperf_salheap) { |
| vfree(sn_hwperf_salheap); |
| sn_hwperf_salheap = NULL; |
| sn_hwperf_obj_cnt = 0; |
| } |
| mutex_unlock(&sn_hwperf_init_mutex); |
| return e; |
| } |
| |
| int sn_topology_open(struct inode *inode, struct file *file) |
| { |
| int e; |
| struct seq_file *seq; |
| struct sn_hwperf_object_info *objbuf; |
| int nobj; |
| |
| if ((e = sn_hwperf_enum_objects(&nobj, &objbuf)) == 0) { |
| e = seq_open(file, &sn_topology_seq_ops); |
| seq = file->private_data; |
| seq->private = objbuf; |
| } |
| |
| return e; |
| } |
| |
| int sn_topology_release(struct inode *inode, struct file *file) |
| { |
| struct seq_file *seq = file->private_data; |
| |
| vfree(seq->private); |
| return seq_release(inode, file); |
| } |
| |
| int sn_hwperf_get_nearest_node(cnodeid_t node, |
| cnodeid_t *near_mem_node, cnodeid_t *near_cpu_node) |
| { |
| int e; |
| int nobj; |
| struct sn_hwperf_object_info *objbuf; |
| |
| if ((e = sn_hwperf_enum_objects(&nobj, &objbuf)) == 0) { |
| e = sn_hwperf_get_nearest_node_objdata(objbuf, nobj, |
| node, near_mem_node, near_cpu_node); |
| vfree(objbuf); |
| } |
| |
| return e; |
| } |
| |
| static int sn_hwperf_misc_register_init(void) |
| { |
| int e; |
| |
| if (!ia64_platform_is("sn2")) |
| return 0; |
| |
| sn_hwperf_init(); |
| |
| /* |
| * Register a dynamic misc device for hwperf ioctls. Platforms |
| * supporting hotplug will create /dev/sn_hwperf, else user |
| * can to look up the minor number in /proc/misc. |
| */ |
| if ((e = misc_register(&sn_hwperf_dev)) != 0) { |
| printk(KERN_ERR "sn_hwperf_misc_register_init: failed to " |
| "register misc device for \"%s\"\n", sn_hwperf_dev.name); |
| } |
| |
| return e; |
| } |
| |
| device_initcall(sn_hwperf_misc_register_init); /* after misc_init() */ |
| EXPORT_SYMBOL(sn_hwperf_get_nearest_node); |