| /* | 
 |  * Driver for the 1250-EV1 audio I/O module | 
 |  * | 
 |  * Copyright 2011 Wolfson Microelectronics plc | 
 |  * | 
 |  *  This program is free software; you can redistribute  it and/or modify it | 
 |  *  under  the terms of  the GNU General  Public License as published by the | 
 |  *  Free Software Foundation;  either version 2 of the  License, or (at your | 
 |  *  option) any later version. | 
 |  * | 
 |  */ | 
 |  | 
 | #include <linux/init.h> | 
 | #include <linux/module.h> | 
 | #include <linux/slab.h> | 
 | #include <linux/i2c.h> | 
 | #include <linux/gpio.h> | 
 |  | 
 | #include <sound/soc.h> | 
 | #include <sound/soc-dapm.h> | 
 | #include <sound/wm1250-ev1.h> | 
 |  | 
 | static const char *wm1250_gpio_names[WM1250_EV1_NUM_GPIOS] = { | 
 | 	"WM1250 CLK_ENA", | 
 | 	"WM1250 CLK_SEL0", | 
 | 	"WM1250 CLK_SEL1", | 
 | 	"WM1250 OSR", | 
 | 	"WM1250 MASTER", | 
 | }; | 
 |  | 
 | struct wm1250_priv { | 
 | 	struct gpio gpios[WM1250_EV1_NUM_GPIOS]; | 
 | }; | 
 |  | 
 | static int wm1250_ev1_set_bias_level(struct snd_soc_codec *codec, | 
 | 				     enum snd_soc_bias_level level) | 
 | { | 
 | 	struct wm1250_priv *wm1250 = dev_get_drvdata(codec->dev); | 
 | 	int ena; | 
 |  | 
 | 	if (wm1250) | 
 | 		ena = wm1250->gpios[WM1250_EV1_GPIO_CLK_ENA].gpio; | 
 | 	else | 
 | 		ena = -1; | 
 |  | 
 | 	switch (level) { | 
 | 	case SND_SOC_BIAS_ON: | 
 | 		break; | 
 |  | 
 | 	case SND_SOC_BIAS_PREPARE: | 
 | 		break; | 
 |  | 
 | 	case SND_SOC_BIAS_STANDBY: | 
 | 		if (ena >= 0) | 
 | 			gpio_set_value_cansleep(ena, 1); | 
 | 		break; | 
 |  | 
 | 	case SND_SOC_BIAS_OFF: | 
 | 		if (ena >= 0) | 
 | 			gpio_set_value_cansleep(ena, 0); | 
 | 		break; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct snd_soc_dapm_widget wm1250_ev1_dapm_widgets[] = { | 
 | SND_SOC_DAPM_ADC("ADC", "wm1250-ev1 Capture", SND_SOC_NOPM, 0, 0), | 
 | SND_SOC_DAPM_DAC("DAC", "wm1250-ev1 Playback", SND_SOC_NOPM, 0, 0), | 
 |  | 
 | SND_SOC_DAPM_INPUT("WM1250 Input"), | 
 | SND_SOC_DAPM_OUTPUT("WM1250 Output"), | 
 | }; | 
 |  | 
 | static const struct snd_soc_dapm_route wm1250_ev1_dapm_routes[] = { | 
 | 	{ "ADC", NULL, "WM1250 Input" }, | 
 | 	{ "WM1250 Output", NULL, "DAC" }, | 
 | }; | 
 |  | 
 | static int wm1250_ev1_hw_params(struct snd_pcm_substream *substream, | 
 | 				struct snd_pcm_hw_params *params, | 
 | 				struct snd_soc_dai *dai) | 
 | { | 
 | 	struct wm1250_priv *wm1250 = snd_soc_codec_get_drvdata(dai->codec); | 
 |  | 
 | 	switch (params_rate(params)) { | 
 | 	case 8000: | 
 | 		gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, | 
 | 			       1); | 
 | 		gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, | 
 | 			       1); | 
 | 		break; | 
 | 	case 16000: | 
 | 		gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, | 
 | 			       0); | 
 | 		gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, | 
 | 			       1); | 
 | 		break; | 
 | 	case 32000: | 
 | 		gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, | 
 | 			       1); | 
 | 		gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, | 
 | 			       0); | 
 | 		break; | 
 | 	case 64000: | 
 | 		gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].gpio, | 
 | 			       0); | 
 | 		gpio_set_value(wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].gpio, | 
 | 			       0); | 
 | 		break; | 
 | 	default: | 
 | 		return -EINVAL; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct snd_soc_dai_ops wm1250_ev1_ops = { | 
 | 	.hw_params = wm1250_ev1_hw_params, | 
 | }; | 
 |  | 
 | #define WM1250_EV1_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |\ | 
 | 			  SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_64000) | 
 |  | 
 | static struct snd_soc_dai_driver wm1250_ev1_dai = { | 
 | 	.name = "wm1250-ev1", | 
 | 	.playback = { | 
 | 		.stream_name = "Playback", | 
 | 		.channels_min = 1, | 
 | 		.channels_max = 2, | 
 | 		.rates = WM1250_EV1_RATES, | 
 | 		.formats = SNDRV_PCM_FMTBIT_S16_LE, | 
 | 	}, | 
 | 	.capture = { | 
 | 		.stream_name = "Capture", | 
 | 		.channels_min = 1, | 
 | 		.channels_max = 2, | 
 | 		.rates = WM1250_EV1_RATES, | 
 | 		.formats = SNDRV_PCM_FMTBIT_S16_LE, | 
 | 	}, | 
 | 	.ops = &wm1250_ev1_ops, | 
 | }; | 
 |  | 
 | static struct snd_soc_codec_driver soc_codec_dev_wm1250_ev1 = { | 
 | 	.dapm_widgets = wm1250_ev1_dapm_widgets, | 
 | 	.num_dapm_widgets = ARRAY_SIZE(wm1250_ev1_dapm_widgets), | 
 | 	.dapm_routes = wm1250_ev1_dapm_routes, | 
 | 	.num_dapm_routes = ARRAY_SIZE(wm1250_ev1_dapm_routes), | 
 |  | 
 | 	.set_bias_level = wm1250_ev1_set_bias_level, | 
 | 	.idle_bias_off = true, | 
 | }; | 
 |  | 
 | static int wm1250_ev1_pdata(struct i2c_client *i2c) | 
 | { | 
 | 	struct wm1250_ev1_pdata *pdata = dev_get_platdata(&i2c->dev); | 
 | 	struct wm1250_priv *wm1250; | 
 | 	int i, ret; | 
 |  | 
 | 	if (!pdata) | 
 | 		return 0; | 
 |  | 
 | 	wm1250 = devm_kzalloc(&i2c->dev, sizeof(*wm1250), GFP_KERNEL); | 
 | 	if (!wm1250) { | 
 | 		ret = -ENOMEM; | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	for (i = 0; i < ARRAY_SIZE(wm1250->gpios); i++) { | 
 | 		wm1250->gpios[i].gpio = pdata->gpios[i]; | 
 | 		wm1250->gpios[i].label = wm1250_gpio_names[i]; | 
 | 		wm1250->gpios[i].flags = GPIOF_OUT_INIT_LOW; | 
 | 	} | 
 | 	wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL0].flags = GPIOF_OUT_INIT_HIGH; | 
 | 	wm1250->gpios[WM1250_EV1_GPIO_CLK_SEL1].flags = GPIOF_OUT_INIT_HIGH; | 
 |  | 
 | 	ret = gpio_request_array(wm1250->gpios, ARRAY_SIZE(wm1250->gpios)); | 
 | 	if (ret != 0) { | 
 | 		dev_err(&i2c->dev, "Failed to get GPIOs: %d\n", ret); | 
 | 		goto err; | 
 | 	} | 
 |  | 
 | 	dev_set_drvdata(&i2c->dev, wm1250); | 
 |  | 
 | 	return ret; | 
 |  | 
 | err: | 
 | 	return ret; | 
 | } | 
 |  | 
 | static void wm1250_ev1_free(struct i2c_client *i2c) | 
 | { | 
 | 	struct wm1250_priv *wm1250 = dev_get_drvdata(&i2c->dev); | 
 |  | 
 | 	if (wm1250) | 
 | 		gpio_free_array(wm1250->gpios, ARRAY_SIZE(wm1250->gpios)); | 
 | } | 
 |  | 
 | static int wm1250_ev1_probe(struct i2c_client *i2c, | 
 | 			    const struct i2c_device_id *i2c_id) | 
 | { | 
 | 	int id, board, rev, ret; | 
 |  | 
 | 	dev_set_drvdata(&i2c->dev, NULL); | 
 |  | 
 | 	board = i2c_smbus_read_byte_data(i2c, 0); | 
 | 	if (board < 0) { | 
 | 		dev_err(&i2c->dev, "Failed to read ID: %d\n", board); | 
 | 		return board; | 
 | 	} | 
 |  | 
 | 	id = (board & 0xfe) >> 2; | 
 | 	rev = board & 0x3; | 
 |  | 
 | 	if (id != 1) { | 
 | 		dev_err(&i2c->dev, "Unknown board ID %d\n", id); | 
 | 		return -ENODEV; | 
 | 	} | 
 |  | 
 | 	dev_info(&i2c->dev, "revision %d\n", rev + 1); | 
 |  | 
 | 	ret = wm1250_ev1_pdata(i2c); | 
 | 	if (ret != 0) | 
 | 		return ret; | 
 |  | 
 | 	ret = snd_soc_register_codec(&i2c->dev, &soc_codec_dev_wm1250_ev1, | 
 | 				     &wm1250_ev1_dai, 1); | 
 | 	if (ret != 0) { | 
 | 		dev_err(&i2c->dev, "Failed to register CODEC: %d\n", ret); | 
 | 		wm1250_ev1_free(i2c); | 
 | 		return ret; | 
 | 	} | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static int wm1250_ev1_remove(struct i2c_client *i2c) | 
 | { | 
 | 	snd_soc_unregister_codec(&i2c->dev); | 
 | 	wm1250_ev1_free(i2c); | 
 |  | 
 | 	return 0; | 
 | } | 
 |  | 
 | static const struct i2c_device_id wm1250_ev1_i2c_id[] = { | 
 | 	{ "wm1250-ev1", 0 }, | 
 | 	{ } | 
 | }; | 
 | MODULE_DEVICE_TABLE(i2c, wm1250_ev1_i2c_id); | 
 |  | 
 | static struct i2c_driver wm1250_ev1_i2c_driver = { | 
 | 	.driver = { | 
 | 		.name = "wm1250-ev1", | 
 | 	}, | 
 | 	.probe =    wm1250_ev1_probe, | 
 | 	.remove =   wm1250_ev1_remove, | 
 | 	.id_table = wm1250_ev1_i2c_id, | 
 | }; | 
 |  | 
 | module_i2c_driver(wm1250_ev1_i2c_driver); | 
 |  | 
 | MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); | 
 | MODULE_DESCRIPTION("WM1250-EV1 audio I/O module driver"); | 
 | MODULE_LICENSE("GPL"); |