| Generic MIPI DPI Panel |
| ====================== |
| |
| Required properties: |
| - compatible: "panel-dpi" |
| |
| Optional properties: |
| - label: a symbolic name for the panel |
| - enable-gpios: panel enable gpio |
| - reset-gpios: GPIO to control the RESET pin |
| - vcc-supply: phandle of regulator that will be used to enable power to the display |
| - backlight: phandle of the backlight device |
| |
| Required nodes: |
| - "panel-timing" containing video timings |
| (Documentation/devicetree/bindings/display/panel/display-timing.txt) |
| - Video port for DPI input |
| |
| Example |
| ------- |
| |
| lcd0: display@0 { |
| compatible = "samsung,lte430wq-f0c", "panel-dpi"; |
| label = "lcd"; |
| |
| backlight = <&backlight>; |
| |
| port { |
| lcd_in: endpoint { |
| remote-endpoint = <&dpi_out>; |
| }; |
| }; |
| |
| panel-timing { |
| clock-frequency = <9200000>; |
| hactive = <480>; |
| vactive = <272>; |
| hfront-porch = <8>; |
| hback-porch = <4>; |
| hsync-len = <41>; |
| vback-porch = <2>; |
| vfront-porch = <4>; |
| vsync-len = <10>; |
| |
| hsync-active = <0>; |
| vsync-active = <0>; |
| de-active = <1>; |
| pixelclk-active = <1>; |
| }; |
| }; |
