drivers/net/wireless/broadcom/brcm80211/include/chipcommon.h - arm/linux - Git at Google

 /*
  * Copyright (c) 2010 Broadcom Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
  * copyright notice and this permission notice appear in all copies.
  *
  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */

 #ifndef	_SBCHIPC_H
 #define	_SBCHIPC_H

 #include "defs.h"		/* for PAD macro */

 #define CHIPCREGOFFS(field)	offsetof(struct chipcregs, field)

 struct chipcregs {
 	u32 chipid;		/* 0x0 */
 	u32 capabilities;
 	u32 corecontrol;	/* corerev >= 1 */
 	u32 bist;

 	/* OTP */
 	u32 otpstatus;	/* 0x10, corerev >= 10 */
 	u32 otpcontrol;
 	u32 otpprog;
 	u32 otplayout;	/* corerev >= 23 */

 	/* Interrupt control */
 	u32 intstatus;	/* 0x20 */
 	u32 intmask;

 	/* Chip specific regs */
 	u32 chipcontrol;	/* 0x28, rev >= 11 */
 	u32 chipstatus;	/* 0x2c, rev >= 11 */

 	/* Jtag Master */
 	u32 jtagcmd;		/* 0x30, rev >= 10 */
 	u32 jtagir;
 	u32 jtagdr;
 	u32 jtagctrl;

 	/* serial flash interface registers */
 	u32 flashcontrol;	/* 0x40 */
 	u32 flashaddress;
 	u32 flashdata;
 	u32 PAD[1];

 	/* Silicon backplane configuration broadcast control */
 	u32 broadcastaddress;	/* 0x50 */
 	u32 broadcastdata;

 	/* gpio - cleared only by power-on-reset */
 	u32 gpiopullup;	/* 0x58, corerev >= 20 */
 	u32 gpiopulldown;	/* 0x5c, corerev >= 20 */
 	u32 gpioin;		/* 0x60 */
 	u32 gpioout;		/* 0x64 */
 	u32 gpioouten;	/* 0x68 */
 	u32 gpiocontrol;	/* 0x6C */
 	u32 gpiointpolarity;	/* 0x70 */
 	u32 gpiointmask;	/* 0x74 */

 	/* GPIO events corerev >= 11 */
 	u32 gpioevent;
 	u32 gpioeventintmask;

 	/* Watchdog timer */
 	u32 watchdog;	/* 0x80 */

 	/* GPIO events corerev >= 11 */
 	u32 gpioeventintpolarity;

 	/* GPIO based LED powersave registers corerev >= 16 */
 	u32 gpiotimerval;	/* 0x88 */
 	u32 gpiotimeroutmask;

 	/* clock control */
 	u32 clockcontrol_n;	/* 0x90 */
 	u32 clockcontrol_sb;	/* aka m0 */
 	u32 clockcontrol_pci;	/* aka m1 */
 	u32 clockcontrol_m2;	/* mii/uart/mipsref */
 	u32 clockcontrol_m3;	/* cpu */
 	u32 clkdiv;		/* corerev >= 3 */
 	u32 gpiodebugsel;	/* corerev >= 28 */
 	u32 capabilities_ext;	/* 0xac  */

 	/* pll delay registers (corerev >= 4) */
 	u32 pll_on_delay;	/* 0xb0 */
 	u32 fref_sel_delay;
 	u32 slow_clk_ctl;	/* 5 < corerev < 10 */
 	u32 PAD;

 	/* Instaclock registers (corerev >= 10) */
 	u32 system_clk_ctl;	/* 0xc0 */
 	u32 clkstatestretch;
 	u32 PAD[2];

 	/* Indirect backplane access (corerev >= 22) */
 	u32 bp_addrlow;	/* 0xd0 */
 	u32 bp_addrhigh;
 	u32 bp_data;
 	u32 PAD;
 	u32 bp_indaccess;
 	u32 PAD[3];

 	/* More clock dividers (corerev >= 32) */
 	u32 clkdiv2;
 	u32 PAD[2];

 	/* In AI chips, pointer to erom */
 	u32 eromptr;		/* 0xfc */

 	/* ExtBus control registers (corerev >= 3) */
 	u32 pcmcia_config;	/* 0x100 */
 	u32 pcmcia_memwait;
 	u32 pcmcia_attrwait;
 	u32 pcmcia_iowait;
 	u32 ide_config;
 	u32 ide_memwait;
 	u32 ide_attrwait;
 	u32 ide_iowait;
 	u32 prog_config;
 	u32 prog_waitcount;
 	u32 flash_config;
 	u32 flash_waitcount;
 	u32 SECI_config;	/* 0x130 SECI configuration */
 	u32 PAD[3];

 	/* Enhanced Coexistence Interface (ECI) registers (corerev >= 21) */
 	u32 eci_output;	/* 0x140 */
 	u32 eci_control;
 	u32 eci_inputlo;
 	u32 eci_inputmi;
 	u32 eci_inputhi;
 	u32 eci_inputintpolaritylo;
 	u32 eci_inputintpolaritymi;
 	u32 eci_inputintpolarityhi;
 	u32 eci_intmasklo;
 	u32 eci_intmaskmi;
 	u32 eci_intmaskhi;
 	u32 eci_eventlo;
 	u32 eci_eventmi;
 	u32 eci_eventhi;
 	u32 eci_eventmasklo;
 	u32 eci_eventmaskmi;
 	u32 eci_eventmaskhi;
 	u32 PAD[3];

 	/* SROM interface (corerev >= 32) */
 	u32 sromcontrol;	/* 0x190 */
 	u32 sromaddress;
 	u32 sromdata;
 	u32 PAD[17];

 	/* Clock control and hardware workarounds (corerev >= 20) */
 	u32 clk_ctl_st;	/* 0x1e0 */
 	u32 hw_war;
 	u32 PAD[70];

 	/* UARTs */
 	u8 uart0data;	/* 0x300 */
 	u8 uart0imr;
 	u8 uart0fcr;
 	u8 uart0lcr;
 	u8 uart0mcr;
 	u8 uart0lsr;
 	u8 uart0msr;
 	u8 uart0scratch;
 	u8 PAD[248];		/* corerev >= 1 */

 	u8 uart1data;	/* 0x400 */
 	u8 uart1imr;
 	u8 uart1fcr;
 	u8 uart1lcr;
 	u8 uart1mcr;
 	u8 uart1lsr;
 	u8 uart1msr;
 	u8 uart1scratch;
 	u32 PAD[62];

 	/* save/restore, corerev >= 48 */
 	u32 sr_capability;          /* 0x500 */
 	u32 sr_control0;            /* 0x504 */
 	u32 sr_control1;            /* 0x508 */
 	u32 gpio_control;           /* 0x50C */
 	u32 PAD[60];

 	/* PMU registers (corerev >= 20) */
 	u32 pmucontrol;	/* 0x600 */
 	u32 pmucapabilities;
 	u32 pmustatus;
 	u32 res_state;
 	u32 res_pending;
 	u32 pmutimer;
 	u32 min_res_mask;
 	u32 max_res_mask;
 	u32 res_table_sel;
 	u32 res_dep_mask;
 	u32 res_updn_timer;
 	u32 res_timer;
 	u32 clkstretch;
 	u32 pmuwatchdog;
 	u32 gpiosel;		/* 0x638, rev >= 1 */
 	u32 gpioenable;	/* 0x63c, rev >= 1 */
 	u32 res_req_timer_sel;
 	u32 res_req_timer;
 	u32 res_req_mask;
 	u32 pmucapabilities_ext; /* 0x64c, pmurev >=15 */
 	u32 chipcontrol_addr;	/* 0x650 */
 	u32 chipcontrol_data;	/* 0x654 */
 	u32 regcontrol_addr;
 	u32 regcontrol_data;
 	u32 pllcontrol_addr;
 	u32 pllcontrol_data;
 	u32 pmustrapopt;	/* 0x668, corerev >= 28 */
 	u32 pmu_xtalfreq;	/* 0x66C, pmurev >= 10 */
 	u32 retention_ctl;          /* 0x670, pmurev >= 15 */
 	u32 PAD[3];
 	u32 retention_grpidx;       /* 0x680 */
 	u32 retention_grpctl;       /* 0x684 */
 	u32 PAD[94];
 	u16 sromotp[768];
 };

 /* chipid */
 #define	CID_ID_MASK		0x0000ffff	/* Chip Id mask */
 #define	CID_REV_MASK		0x000f0000	/* Chip Revision mask */
 #define	CID_REV_SHIFT		16	/* Chip Revision shift */
 #define	CID_PKG_MASK		0x00f00000	/* Package Option mask */
 #define	CID_PKG_SHIFT		20	/* Package Option shift */
 #define	CID_CC_MASK		0x0f000000	/* CoreCount (corerev >= 4) */
 #define CID_CC_SHIFT		24
 #define	CID_TYPE_MASK		0xf0000000	/* Chip Type */
 #define CID_TYPE_SHIFT		28

 /* capabilities */
 #define	CC_CAP_UARTS_MASK	0x00000003	/* Number of UARTs */
 #define CC_CAP_MIPSEB		0x00000004	/* MIPS is in big-endian mode */
 #define CC_CAP_UCLKSEL		0x00000018	/* UARTs clock select */
 /* UARTs are driven by internal divided clock */
 #define CC_CAP_UINTCLK		0x00000008
 #define CC_CAP_UARTGPIO		0x00000020	/* UARTs own GPIOs 15:12 */
 #define CC_CAP_EXTBUS_MASK	0x000000c0	/* External bus mask */
 #define CC_CAP_EXTBUS_NONE	0x00000000	/* No ExtBus present */
 #define CC_CAP_EXTBUS_FULL	0x00000040	/* ExtBus: PCMCIA, IDE & Prog */
 #define CC_CAP_EXTBUS_PROG	0x00000080	/* ExtBus: ProgIf only */
 #define	CC_CAP_FLASH_MASK	0x00000700	/* Type of flash */
 #define	CC_CAP_PLL_MASK		0x00038000	/* Type of PLL */
 #define CC_CAP_PWR_CTL		0x00040000	/* Power control */
 #define CC_CAP_OTPSIZE		0x00380000	/* OTP Size (0 = none) */
 #define CC_CAP_OTPSIZE_SHIFT	19	/* OTP Size shift */
 #define CC_CAP_OTPSIZE_BASE	5	/* OTP Size base */
 #define CC_CAP_JTAGP		0x00400000	/* JTAG Master Present */
 #define CC_CAP_ROM		0x00800000	/* Internal boot rom active */
 #define CC_CAP_BKPLN64		0x08000000	/* 64-bit backplane */
 #define	CC_CAP_PMU		0x10000000	/* PMU Present, rev >= 20 */
 #define	CC_CAP_SROM		0x40000000	/* Srom Present, rev >= 32 */
 /* Nand flash present, rev >= 35 */
 #define	CC_CAP_NFLASH		0x80000000

 #define	CC_CAP2_SECI		0x00000001	/* SECI Present, rev >= 36 */
 /* GSIO (spi/i2c) present, rev >= 37 */
 #define	CC_CAP2_GSIO		0x00000002

 /* pmucapabilities */
 #define PCAP_REV_MASK	0x000000ff
 #define PCAP_RC_MASK	0x00001f00
 #define PCAP_RC_SHIFT	8
 #define PCAP_TC_MASK	0x0001e000
 #define PCAP_TC_SHIFT	13
 #define PCAP_PC_MASK	0x001e0000
 #define PCAP_PC_SHIFT	17
 #define PCAP_VC_MASK	0x01e00000
 #define PCAP_VC_SHIFT	21
 #define PCAP_CC_MASK	0x1e000000
 #define PCAP_CC_SHIFT	25
 #define PCAP5_PC_MASK	0x003e0000	/* PMU corerev >= 5 */
 #define PCAP5_PC_SHIFT	17
 #define PCAP5_VC_MASK	0x07c00000
 #define PCAP5_VC_SHIFT	22
 #define PCAP5_CC_MASK	0xf8000000
 #define PCAP5_CC_SHIFT	27
 /* pmucapabilites_ext PMU rev >= 15 */
 #define PCAPEXT_SR_SUPPORTED_MASK	(1 << 1)
 /* retention_ctl PMU rev >= 15 */
 #define PMU_RCTL_MACPHY_DISABLE_MASK        (1 << 26)
 #define PMU_RCTL_LOGIC_DISABLE_MASK         (1 << 27)


 /*
 * Maximum delay for the PMU state transition in us.
 * This is an upper bound intended for spinwaits etc.
 */
 #define PMU_MAX_TRANSITION_DLY	15000

 #endif				/* _SBCHIPC_H */
	/*
	* Copyright (c) 2010 Broadcom Corporation
	*
	* Permission to use, copy, modify, and/or distribute this software for any
	* purpose with or without fee is hereby granted, provided that the above
	* copyright notice and this permission notice appear in all copies.
	*
	* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
	* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
	* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
	* SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
	* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
	* OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
	* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
	*/

	#ifndef _SBCHIPC_H
	#define _SBCHIPC_H

	#include "defs.h" /* for PAD macro */

	#define CHIPCREGOFFS(field) offsetof(struct chipcregs, field)

	struct chipcregs {
	u32 chipid; /* 0x0 */
	u32 capabilities;
	u32 corecontrol; /* corerev >= 1 */
	u32 bist;

	/* OTP */
	u32 otpstatus; /* 0x10, corerev >= 10 */
	u32 otpcontrol;
	u32 otpprog;
	u32 otplayout; /* corerev >= 23 */

	/* Interrupt control */
	u32 intstatus; /* 0x20 */
	u32 intmask;

	/* Chip specific regs */
	u32 chipcontrol; /* 0x28, rev >= 11 */
	u32 chipstatus; /* 0x2c, rev >= 11 */

	/* Jtag Master */
	u32 jtagcmd; /* 0x30, rev >= 10 */
	u32 jtagir;
	u32 jtagdr;
	u32 jtagctrl;

	/* serial flash interface registers */
	u32 flashcontrol; /* 0x40 */
	u32 flashaddress;
	u32 flashdata;
	u32 PAD[1];

	/* Silicon backplane configuration broadcast control */
	u32 broadcastaddress; /* 0x50 */
	u32 broadcastdata;

	/* gpio - cleared only by power-on-reset */
	u32 gpiopullup; /* 0x58, corerev >= 20 */
	u32 gpiopulldown; /* 0x5c, corerev >= 20 */
	u32 gpioin; /* 0x60 */
	u32 gpioout; /* 0x64 */
	u32 gpioouten; /* 0x68 */
	u32 gpiocontrol; /* 0x6C */
	u32 gpiointpolarity; /* 0x70 */
	u32 gpiointmask; /* 0x74 */

	/* GPIO events corerev >= 11 */
	u32 gpioevent;
	u32 gpioeventintmask;

	/* Watchdog timer */
	u32 watchdog; /* 0x80 */

	/* GPIO events corerev >= 11 */
	u32 gpioeventintpolarity;

	/* GPIO based LED powersave registers corerev >= 16 */
	u32 gpiotimerval; /* 0x88 */
	u32 gpiotimeroutmask;

	/* clock control */
	u32 clockcontrol_n; /* 0x90 */
	u32 clockcontrol_sb; /* aka m0 */
	u32 clockcontrol_pci; /* aka m1 */
	u32 clockcontrol_m2; /* mii/uart/mipsref */
	u32 clockcontrol_m3; /* cpu */
	u32 clkdiv; /* corerev >= 3 */
	u32 gpiodebugsel; /* corerev >= 28 */
	u32 capabilities_ext; /* 0xac */

	/* pll delay registers (corerev >= 4) */
	u32 pll_on_delay; /* 0xb0 */
	u32 fref_sel_delay;
	u32 slow_clk_ctl; /* 5 < corerev < 10 */
	u32 PAD;

	/* Instaclock registers (corerev >= 10) */
	u32 system_clk_ctl; /* 0xc0 */
	u32 clkstatestretch;
	u32 PAD[2];

	/* Indirect backplane access (corerev >= 22) */
	u32 bp_addrlow; /* 0xd0 */
	u32 bp_addrhigh;
	u32 bp_data;
	u32 PAD;
	u32 bp_indaccess;
	u32 PAD[3];

	/* More clock dividers (corerev >= 32) */
	u32 clkdiv2;
	u32 PAD[2];

	/* In AI chips, pointer to erom */
	u32 eromptr; /* 0xfc */

	/* ExtBus control registers (corerev >= 3) */
	u32 pcmcia_config; /* 0x100 */
	u32 pcmcia_memwait;
	u32 pcmcia_attrwait;
	u32 pcmcia_iowait;
	u32 ide_config;
	u32 ide_memwait;
	u32 ide_attrwait;
	u32 ide_iowait;
	u32 prog_config;
	u32 prog_waitcount;
	u32 flash_config;
	u32 flash_waitcount;
	u32 SECI_config; /* 0x130 SECI configuration */
	u32 PAD[3];

	/* Enhanced Coexistence Interface (ECI) registers (corerev >= 21) */
	u32 eci_output; /* 0x140 */
	u32 eci_control;
	u32 eci_inputlo;
	u32 eci_inputmi;
	u32 eci_inputhi;
	u32 eci_inputintpolaritylo;
	u32 eci_inputintpolaritymi;
	u32 eci_inputintpolarityhi;
	u32 eci_intmasklo;
	u32 eci_intmaskmi;
	u32 eci_intmaskhi;
	u32 eci_eventlo;
	u32 eci_eventmi;
	u32 eci_eventhi;
	u32 eci_eventmasklo;
	u32 eci_eventmaskmi;
	u32 eci_eventmaskhi;
	u32 PAD[3];

	/* SROM interface (corerev >= 32) */
	u32 sromcontrol; /* 0x190 */
	u32 sromaddress;
	u32 sromdata;
	u32 PAD[17];

	/* Clock control and hardware workarounds (corerev >= 20) */
	u32 clk_ctl_st; /* 0x1e0 */
	u32 hw_war;
	u32 PAD[70];

	/* UARTs */
	u8 uart0data; /* 0x300 */
	u8 uart0imr;
	u8 uart0fcr;
	u8 uart0lcr;
	u8 uart0mcr;
	u8 uart0lsr;
	u8 uart0msr;
	u8 uart0scratch;
	u8 PAD[248]; /* corerev >= 1 */

	u8 uart1data; /* 0x400 */
	u8 uart1imr;
	u8 uart1fcr;
	u8 uart1lcr;
	u8 uart1mcr;
	u8 uart1lsr;
	u8 uart1msr;
	u8 uart1scratch;
	u32 PAD[62];

	/* save/restore, corerev >= 48 */
	u32 sr_capability; /* 0x500 */
	u32 sr_control0; /* 0x504 */
	u32 sr_control1; /* 0x508 */
	u32 gpio_control; /* 0x50C */
	u32 PAD[60];

	/* PMU registers (corerev >= 20) */
	u32 pmucontrol; /* 0x600 */
	u32 pmucapabilities;
	u32 pmustatus;
	u32 res_state;
	u32 res_pending;
	u32 pmutimer;
	u32 min_res_mask;
	u32 max_res_mask;
	u32 res_table_sel;
	u32 res_dep_mask;
	u32 res_updn_timer;
	u32 res_timer;
	u32 clkstretch;
	u32 pmuwatchdog;
	u32 gpiosel; /* 0x638, rev >= 1 */
	u32 gpioenable; /* 0x63c, rev >= 1 */
	u32 res_req_timer_sel;
	u32 res_req_timer;
	u32 res_req_mask;
	u32 pmucapabilities_ext; /* 0x64c, pmurev >=15 */
	u32 chipcontrol_addr; /* 0x650 */
	u32 chipcontrol_data; /* 0x654 */
	u32 regcontrol_addr;
	u32 regcontrol_data;
	u32 pllcontrol_addr;
	u32 pllcontrol_data;
	u32 pmustrapopt; /* 0x668, corerev >= 28 */
	u32 pmu_xtalfreq; /* 0x66C, pmurev >= 10 */
	u32 retention_ctl; /* 0x670, pmurev >= 15 */
	u32 PAD[3];
	u32 retention_grpidx; /* 0x680 */
	u32 retention_grpctl; /* 0x684 */
	u32 PAD[94];
	u16 sromotp[768];
	};

	/* chipid */
	#define CID_ID_MASK 0x0000ffff /* Chip Id mask */
	#define CID_REV_MASK 0x000f0000 /* Chip Revision mask */
	#define CID_REV_SHIFT 16 /* Chip Revision shift */
	#define CID_PKG_MASK 0x00f00000 /* Package Option mask */
	#define CID_PKG_SHIFT 20 /* Package Option shift */
	#define CID_CC_MASK 0x0f000000 /* CoreCount (corerev >= 4) */
	#define CID_CC_SHIFT 24
	#define CID_TYPE_MASK 0xf0000000 /* Chip Type */
	#define CID_TYPE_SHIFT 28

	/* capabilities */
	#define CC_CAP_UARTS_MASK 0x00000003 /* Number of UARTs */
	#define CC_CAP_MIPSEB 0x00000004 /* MIPS is in big-endian mode */
	#define CC_CAP_UCLKSEL 0x00000018 /* UARTs clock select */
	/* UARTs are driven by internal divided clock */
	#define CC_CAP_UINTCLK 0x00000008
	#define CC_CAP_UARTGPIO 0x00000020 /* UARTs own GPIOs 15:12 */
	#define CC_CAP_EXTBUS_MASK 0x000000c0 /* External bus mask */
	#define CC_CAP_EXTBUS_NONE 0x00000000 /* No ExtBus present */
	#define CC_CAP_EXTBUS_FULL 0x00000040 /* ExtBus: PCMCIA, IDE & Prog */
	#define CC_CAP_EXTBUS_PROG 0x00000080 /* ExtBus: ProgIf only */
	#define CC_CAP_FLASH_MASK 0x00000700 /* Type of flash */
	#define CC_CAP_PLL_MASK 0x00038000 /* Type of PLL */
	#define CC_CAP_PWR_CTL 0x00040000 /* Power control */
	#define CC_CAP_OTPSIZE 0x00380000 /* OTP Size (0 = none) */
	#define CC_CAP_OTPSIZE_SHIFT 19 /* OTP Size shift */
	#define CC_CAP_OTPSIZE_BASE 5 /* OTP Size base */
	#define CC_CAP_JTAGP 0x00400000 /* JTAG Master Present */
	#define CC_CAP_ROM 0x00800000 /* Internal boot rom active */
	#define CC_CAP_BKPLN64 0x08000000 /* 64-bit backplane */
	#define CC_CAP_PMU 0x10000000 /* PMU Present, rev >= 20 */
	#define CC_CAP_SROM 0x40000000 /* Srom Present, rev >= 32 */
	/* Nand flash present, rev >= 35 */
	#define CC_CAP_NFLASH 0x80000000

	#define CC_CAP2_SECI 0x00000001 /* SECI Present, rev >= 36 */
	/* GSIO (spi/i2c) present, rev >= 37 */
	#define CC_CAP2_GSIO 0x00000002

	/* pmucapabilities */
	#define PCAP_REV_MASK 0x000000ff
	#define PCAP_RC_MASK 0x00001f00
	#define PCAP_RC_SHIFT 8
	#define PCAP_TC_MASK 0x0001e000
	#define PCAP_TC_SHIFT 13
	#define PCAP_PC_MASK 0x001e0000
	#define PCAP_PC_SHIFT 17
	#define PCAP_VC_MASK 0x01e00000
	#define PCAP_VC_SHIFT 21
	#define PCAP_CC_MASK 0x1e000000
	#define PCAP_CC_SHIFT 25
	#define PCAP5_PC_MASK 0x003e0000 /* PMU corerev >= 5 */
	#define PCAP5_PC_SHIFT 17
	#define PCAP5_VC_MASK 0x07c00000
	#define PCAP5_VC_SHIFT 22
	#define PCAP5_CC_MASK 0xf8000000
	#define PCAP5_CC_SHIFT 27
	/* pmucapabilites_ext PMU rev >= 15 */
	#define PCAPEXT_SR_SUPPORTED_MASK (1 << 1)
	/* retention_ctl PMU rev >= 15 */
	#define PMU_RCTL_MACPHY_DISABLE_MASK (1 << 26)
	#define PMU_RCTL_LOGIC_DISABLE_MASK (1 << 27)


	/*
	* Maximum delay for the PMU state transition in us.
	* This is an upper bound intended for spinwaits etc.
	*/
	#define PMU_MAX_TRANSITION_DLY 15000

	#endif /* _SBCHIPC_H */