| /* |
| * Page Deallocation Table (PDT) support |
| * |
| * The Page Deallocation Table (PDT) is maintained by firmware and holds a |
| * list of memory addresses in which memory errors were detected. |
| * The list contains both single-bit (correctable) and double-bit |
| * (uncorrectable) errors. |
| * |
| * Copyright 2017 by Helge Deller <deller@gmx.de> |
| * |
| * possible future enhancements: |
| * - add userspace interface via procfs or sysfs to clear PDT |
| */ |
| |
| #include <linux/memblock.h> |
| #include <linux/seq_file.h> |
| #include <linux/kthread.h> |
| #include <linux/initrd.h> |
| |
| #include <asm/pdc.h> |
| #include <asm/pdcpat.h> |
| #include <asm/sections.h> |
| #include <asm/pgtable.h> |
| |
| enum pdt_access_type { |
| PDT_NONE, |
| PDT_PDC, |
| PDT_PAT_NEW, |
| PDT_PAT_CELL |
| }; |
| |
| static enum pdt_access_type pdt_type; |
| |
| /* PDT poll interval: 1 minute if errors, 5 minutes if everything OK. */ |
| #define PDT_POLL_INTERVAL_DEFAULT (5*60*HZ) |
| #define PDT_POLL_INTERVAL_SHORT (1*60*HZ) |
| static unsigned long pdt_poll_interval = PDT_POLL_INTERVAL_DEFAULT; |
| |
| /* global PDT status information */ |
| static struct pdc_mem_retinfo pdt_status; |
| |
| #define MAX_PDT_TABLE_SIZE PAGE_SIZE |
| #define MAX_PDT_ENTRIES (MAX_PDT_TABLE_SIZE / sizeof(unsigned long)) |
| static unsigned long pdt_entry[MAX_PDT_ENTRIES] __page_aligned_bss; |
| |
| /* |
| * Constants for the pdt_entry format: |
| * A pdt_entry holds the physical address in bits 0-57, bits 58-61 are |
| * reserved, bit 62 is the perm bit and bit 63 is the error_type bit. |
| * The perm bit indicates whether the error have been verified as a permanent |
| * error (value of 1) or has not been verified, and may be transient (value |
| * of 0). The error_type bit indicates whether the error is a single bit error |
| * (value of 1) or a multiple bit error. |
| * On non-PAT machines phys_addr is encoded in bits 0-59 and error_type in bit |
| * 63. Those machines don't provide the perm bit. |
| */ |
| |
| #define PDT_ADDR_PHYS_MASK (pdt_type != PDT_PDC ? ~0x3f : ~0x0f) |
| #define PDT_ADDR_PERM_ERR (pdt_type != PDT_PDC ? 2UL : 0UL) |
| #define PDT_ADDR_SINGLE_ERR 1UL |
| |
| /* report PDT entries via /proc/meminfo */ |
| void arch_report_meminfo(struct seq_file *m) |
| { |
| if (pdt_type == PDT_NONE) |
| return; |
| |
| seq_printf(m, "PDT_max_entries: %7lu\n", |
| pdt_status.pdt_size); |
| seq_printf(m, "PDT_cur_entries: %7lu\n", |
| pdt_status.pdt_entries); |
| } |
| |
| static int get_info_pat_new(void) |
| { |
| struct pdc_pat_mem_retinfo pat_rinfo; |
| int ret; |
| |
| /* newer PAT machines like C8000 report info for all cells */ |
| if (is_pdc_pat()) |
| ret = pdc_pat_mem_pdt_info(&pat_rinfo); |
| else |
| return PDC_BAD_PROC; |
| |
| pdt_status.pdt_size = pat_rinfo.max_pdt_entries; |
| pdt_status.pdt_entries = pat_rinfo.current_pdt_entries; |
| pdt_status.pdt_status = 0; |
| pdt_status.first_dbe_loc = pat_rinfo.first_dbe_loc; |
| pdt_status.good_mem = pat_rinfo.good_mem; |
| |
| return ret; |
| } |
| |
| static int get_info_pat_cell(void) |
| { |
| struct pdc_pat_mem_cell_pdt_retinfo cell_rinfo; |
| int ret; |
| |
| /* older PAT machines like rp5470 report cell info only */ |
| if (is_pdc_pat()) |
| ret = pdc_pat_mem_pdt_cell_info(&cell_rinfo, parisc_cell_num); |
| else |
| return PDC_BAD_PROC; |
| |
| pdt_status.pdt_size = cell_rinfo.max_pdt_entries; |
| pdt_status.pdt_entries = cell_rinfo.current_pdt_entries; |
| pdt_status.pdt_status = 0; |
| pdt_status.first_dbe_loc = cell_rinfo.first_dbe_loc; |
| pdt_status.good_mem = cell_rinfo.good_mem; |
| |
| return ret; |
| } |
| |
| static void report_mem_err(unsigned long pde) |
| { |
| struct pdc_pat_mem_phys_mem_location loc; |
| unsigned long addr; |
| char dimm_txt[32]; |
| |
| addr = pde & PDT_ADDR_PHYS_MASK; |
| |
| /* show DIMM slot description on PAT machines */ |
| if (is_pdc_pat()) { |
| pdc_pat_mem_get_dimm_phys_location(&loc, addr); |
| sprintf(dimm_txt, "DIMM slot %02x, ", loc.dimm_slot); |
| } else |
| dimm_txt[0] = 0; |
| |
| pr_warn("PDT: BAD MEMORY at 0x%08lx, %s%s%s-bit error.\n", |
| addr, dimm_txt, |
| pde & PDT_ADDR_PERM_ERR ? "permanent ":"", |
| pde & PDT_ADDR_SINGLE_ERR ? "single":"multi"); |
| } |
| |
| |
| /* |
| * pdc_pdt_init() |
| * |
| * Initialize kernel PDT structures, read initial PDT table from firmware, |
| * report all current PDT entries and mark bad memory with memblock_reserve() |
| * to avoid that the kernel will use broken memory areas. |
| * |
| */ |
| void __init pdc_pdt_init(void) |
| { |
| int ret, i; |
| unsigned long entries; |
| struct pdc_mem_read_pdt pdt_read_ret; |
| |
| pdt_type = PDT_PAT_NEW; |
| ret = get_info_pat_new(); |
| |
| if (ret != PDC_OK) { |
| pdt_type = PDT_PAT_CELL; |
| ret = get_info_pat_cell(); |
| } |
| |
| if (ret != PDC_OK) { |
| pdt_type = PDT_PDC; |
| /* non-PAT machines provide the standard PDC call */ |
| ret = pdc_mem_pdt_info(&pdt_status); |
| } |
| |
| if (ret != PDC_OK) { |
| pdt_type = PDT_NONE; |
| pr_info("PDT: Firmware does not provide any page deallocation" |
| " information.\n"); |
| return; |
| } |
| |
| entries = pdt_status.pdt_entries; |
| if (WARN_ON(entries > MAX_PDT_ENTRIES)) |
| entries = pdt_status.pdt_entries = MAX_PDT_ENTRIES; |
| |
| pr_info("PDT: type %s, size %lu, entries %lu, status %lu, dbe_loc 0x%lx," |
| " good_mem %lu MB\n", |
| pdt_type == PDT_PDC ? __stringify(PDT_PDC) : |
| pdt_type == PDT_PAT_CELL ? __stringify(PDT_PAT_CELL) |
| : __stringify(PDT_PAT_NEW), |
| pdt_status.pdt_size, pdt_status.pdt_entries, |
| pdt_status.pdt_status, pdt_status.first_dbe_loc, |
| pdt_status.good_mem / 1024 / 1024); |
| |
| if (entries == 0) { |
| pr_info("PDT: Firmware reports all memory OK.\n"); |
| return; |
| } |
| |
| if (pdt_status.first_dbe_loc && |
| pdt_status.first_dbe_loc <= __pa((unsigned long)&_end)) |
| pr_crit("CRITICAL: Bad memory inside kernel image memory area!\n"); |
| |
| pr_warn("PDT: Firmware reports %lu entries of faulty memory:\n", |
| entries); |
| |
| if (pdt_type == PDT_PDC) |
| ret = pdc_mem_pdt_read_entries(&pdt_read_ret, pdt_entry); |
| else { |
| #ifdef CONFIG_64BIT |
| struct pdc_pat_mem_read_pd_retinfo pat_pret; |
| |
| if (pdt_type == PDT_PAT_CELL) |
| ret = pdc_pat_mem_read_cell_pdt(&pat_pret, pdt_entry, |
| MAX_PDT_ENTRIES); |
| else |
| ret = pdc_pat_mem_read_pd_pdt(&pat_pret, pdt_entry, |
| MAX_PDT_TABLE_SIZE, 0); |
| #else |
| ret = PDC_BAD_PROC; |
| #endif |
| } |
| |
| if (ret != PDC_OK) { |
| pdt_type = PDT_NONE; |
| pr_warn("PDT: Get PDT entries failed with %d\n", ret); |
| return; |
| } |
| |
| for (i = 0; i < pdt_status.pdt_entries; i++) { |
| unsigned long addr; |
| |
| report_mem_err(pdt_entry[i]); |
| |
| addr = pdt_entry[i] & PDT_ADDR_PHYS_MASK; |
| if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && |
| addr >= initrd_start && addr < initrd_end) |
| pr_crit("CRITICAL: initrd possibly broken " |
| "due to bad memory!\n"); |
| |
| /* mark memory page bad */ |
| memblock_reserve(pdt_entry[i] & PAGE_MASK, PAGE_SIZE); |
| } |
| } |
| |
| |
| /* |
| * This is the PDT kernel thread main loop. |
| */ |
| |
| static int pdt_mainloop(void *unused) |
| { |
| struct pdc_mem_read_pdt pdt_read_ret; |
| struct pdc_pat_mem_read_pd_retinfo pat_pret __maybe_unused; |
| unsigned long old_num_entries; |
| unsigned long *bad_mem_ptr; |
| int num, ret; |
| |
| for (;;) { |
| set_current_state(TASK_INTERRUPTIBLE); |
| |
| old_num_entries = pdt_status.pdt_entries; |
| |
| schedule_timeout(pdt_poll_interval); |
| if (kthread_should_stop()) |
| break; |
| |
| /* Do we have new PDT entries? */ |
| switch (pdt_type) { |
| case PDT_PAT_NEW: |
| ret = get_info_pat_new(); |
| break; |
| case PDT_PAT_CELL: |
| ret = get_info_pat_cell(); |
| break; |
| default: |
| ret = pdc_mem_pdt_info(&pdt_status); |
| break; |
| } |
| |
| if (ret != PDC_OK) { |
| pr_warn("PDT: unexpected failure %d\n", ret); |
| return -EINVAL; |
| } |
| |
| /* if no new PDT entries, just wait again */ |
| num = pdt_status.pdt_entries - old_num_entries; |
| if (num <= 0) |
| continue; |
| |
| /* decrease poll interval in case we found memory errors */ |
| if (pdt_status.pdt_entries && |
| pdt_poll_interval == PDT_POLL_INTERVAL_DEFAULT) |
| pdt_poll_interval = PDT_POLL_INTERVAL_SHORT; |
| |
| /* limit entries to get */ |
| if (num > MAX_PDT_ENTRIES) { |
| num = MAX_PDT_ENTRIES; |
| pdt_status.pdt_entries = old_num_entries + num; |
| } |
| |
| /* get new entries */ |
| switch (pdt_type) { |
| #ifdef CONFIG_64BIT |
| case PDT_PAT_CELL: |
| if (pdt_status.pdt_entries > MAX_PDT_ENTRIES) { |
| pr_crit("PDT: too many entries.\n"); |
| return -ENOMEM; |
| } |
| ret = pdc_pat_mem_read_cell_pdt(&pat_pret, pdt_entry, |
| MAX_PDT_ENTRIES); |
| bad_mem_ptr = &pdt_entry[old_num_entries]; |
| break; |
| case PDT_PAT_NEW: |
| ret = pdc_pat_mem_read_pd_pdt(&pat_pret, |
| pdt_entry, |
| num * sizeof(unsigned long), |
| old_num_entries * sizeof(unsigned long)); |
| bad_mem_ptr = &pdt_entry[0]; |
| break; |
| #endif |
| default: |
| ret = pdc_mem_pdt_read_entries(&pdt_read_ret, |
| pdt_entry); |
| bad_mem_ptr = &pdt_entry[old_num_entries]; |
| break; |
| } |
| |
| /* report and mark memory broken */ |
| while (num--) { |
| unsigned long pde = *bad_mem_ptr++; |
| |
| report_mem_err(pde); |
| |
| #ifdef CONFIG_MEMORY_FAILURE |
| if ((pde & PDT_ADDR_PERM_ERR) || |
| ((pde & PDT_ADDR_SINGLE_ERR) == 0)) |
| memory_failure(pde >> PAGE_SHIFT, 0, 0); |
| else |
| soft_offline_page( |
| pfn_to_page(pde >> PAGE_SHIFT), 0); |
| #else |
| pr_crit("PDT: memory error at 0x%lx ignored.\n" |
| "Rebuild kernel with CONFIG_MEMORY_FAILURE=y " |
| "for real handling.\n", |
| pde & PDT_ADDR_PHYS_MASK); |
| #endif |
| |
| } |
| } |
| |
| return 0; |
| } |
| |
| |
| static int __init pdt_initcall(void) |
| { |
| struct task_struct *kpdtd_task; |
| |
| if (pdt_type == PDT_NONE) |
| return -ENODEV; |
| |
| kpdtd_task = kthread_create(pdt_mainloop, NULL, "kpdtd"); |
| if (IS_ERR(kpdtd_task)) |
| return PTR_ERR(kpdtd_task); |
| |
| wake_up_process(kpdtd_task); |
| |
| return 0; |
| } |
| |
| late_initcall(pdt_initcall); |