| /* | |
| * Copyright 2002-2005, Instant802 Networks, Inc. | |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/init.h> | |
| #include <linux/etherdevice.h> | |
| #include <linux/netdevice.h> | |
| #include <linux/types.h> | |
| #include <linux/slab.h> | |
| #include <linux/skbuff.h> | |
| #include <linux/if_arp.h> | |
| #include <linux/timer.h> | |
| #include <linux/rtnetlink.h> | |
| #include <net/mac80211.h> | |
| #include "ieee80211_i.h" | |
| #include "driver-ops.h" | |
| #include "rate.h" | |
| #include "sta_info.h" | |
| #include "debugfs_sta.h" | |
| #include "mesh.h" | |
| #include "wme.h" | |
| /** | |
| * DOC: STA information lifetime rules | |
| * | |
| * STA info structures (&struct sta_info) are managed in a hash table | |
| * for faster lookup and a list for iteration. They are managed using | |
| * RCU, i.e. access to the list and hash table is protected by RCU. | |
| * | |
| * Upon allocating a STA info structure with sta_info_alloc(), the caller | |
| * owns that structure. It must then insert it into the hash table using | |
| * either sta_info_insert() or sta_info_insert_rcu(); only in the latter | |
| * case (which acquires an rcu read section but must not be called from | |
| * within one) will the pointer still be valid after the call. Note that | |
| * the caller may not do much with the STA info before inserting it, in | |
| * particular, it may not start any mesh peer link management or add | |
| * encryption keys. | |
| * | |
| * When the insertion fails (sta_info_insert()) returns non-zero), the | |
| * structure will have been freed by sta_info_insert()! | |
| * | |
| * Station entries are added by mac80211 when you establish a link with a | |
| * peer. This means different things for the different type of interfaces | |
| * we support. For a regular station this mean we add the AP sta when we | |
| * receive an association response from the AP. For IBSS this occurs when | |
| * get to know about a peer on the same IBSS. For WDS we add the sta for | |
| * the peer immediately upon device open. When using AP mode we add stations | |
| * for each respective station upon request from userspace through nl80211. | |
| * | |
| * In order to remove a STA info structure, various sta_info_destroy_*() | |
| * calls are available. | |
| * | |
| * There is no concept of ownership on a STA entry, each structure is | |
| * owned by the global hash table/list until it is removed. All users of | |
| * the structure need to be RCU protected so that the structure won't be | |
| * freed before they are done using it. | |
| */ | |
| /* Caller must hold local->sta_mtx */ | |
| static int sta_info_hash_del(struct ieee80211_local *local, | |
| struct sta_info *sta) | |
| { | |
| struct sta_info *s; | |
| s = rcu_dereference_protected(local->sta_hash[STA_HASH(sta->sta.addr)], | |
| lockdep_is_held(&local->sta_mtx)); | |
| if (!s) | |
| return -ENOENT; | |
| if (s == sta) { | |
| rcu_assign_pointer(local->sta_hash[STA_HASH(sta->sta.addr)], | |
| s->hnext); | |
| return 0; | |
| } | |
| while (rcu_access_pointer(s->hnext) && | |
| rcu_access_pointer(s->hnext) != sta) | |
| s = rcu_dereference_protected(s->hnext, | |
| lockdep_is_held(&local->sta_mtx)); | |
| if (rcu_access_pointer(s->hnext)) { | |
| rcu_assign_pointer(s->hnext, sta->hnext); | |
| return 0; | |
| } | |
| return -ENOENT; | |
| } | |
| static void cleanup_single_sta(struct sta_info *sta) | |
| { | |
| int ac, i; | |
| struct tid_ampdu_tx *tid_tx; | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| struct ieee80211_local *local = sdata->local; | |
| struct ps_data *ps; | |
| /* | |
| * At this point, when being called as call_rcu callback, | |
| * neither mac80211 nor the driver can reference this | |
| * sta struct any more except by still existing timers | |
| * associated with this station that we clean up below. | |
| * | |
| * Note though that this still uses the sdata and even | |
| * calls the driver in AP and mesh mode, so interfaces | |
| * of those types mush use call sta_info_flush_cleanup() | |
| * (typically via sta_info_flush()) before deconfiguring | |
| * the driver. | |
| * | |
| * In station mode, nothing happens here so it doesn't | |
| * have to (and doesn't) do that, this is intentional to | |
| * speed up roaming. | |
| */ | |
| if (test_sta_flag(sta, WLAN_STA_PS_STA)) { | |
| if (sta->sdata->vif.type == NL80211_IFTYPE_AP || | |
| sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | |
| ps = &sdata->bss->ps; | |
| else if (ieee80211_vif_is_mesh(&sdata->vif)) | |
| ps = &sdata->u.mesh.ps; | |
| else | |
| return; | |
| clear_sta_flag(sta, WLAN_STA_PS_STA); | |
| atomic_dec(&ps->num_sta_ps); | |
| sta_info_recalc_tim(sta); | |
| } | |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | |
| local->total_ps_buffered -= skb_queue_len(&sta->ps_tx_buf[ac]); | |
| ieee80211_purge_tx_queue(&local->hw, &sta->ps_tx_buf[ac]); | |
| ieee80211_purge_tx_queue(&local->hw, &sta->tx_filtered[ac]); | |
| } | |
| if (ieee80211_vif_is_mesh(&sdata->vif)) | |
| mesh_sta_cleanup(sta); | |
| cancel_work_sync(&sta->drv_unblock_wk); | |
| /* | |
| * Destroy aggregation state here. It would be nice to wait for the | |
| * driver to finish aggregation stop and then clean up, but for now | |
| * drivers have to handle aggregation stop being requested, followed | |
| * directly by station destruction. | |
| */ | |
| for (i = 0; i < IEEE80211_NUM_TIDS; i++) { | |
| kfree(sta->ampdu_mlme.tid_start_tx[i]); | |
| tid_tx = rcu_dereference_raw(sta->ampdu_mlme.tid_tx[i]); | |
| if (!tid_tx) | |
| continue; | |
| ieee80211_purge_tx_queue(&local->hw, &tid_tx->pending); | |
| kfree(tid_tx); | |
| } | |
| sta_info_free(local, sta); | |
| } | |
| void ieee80211_cleanup_sdata_stas(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct sta_info *sta; | |
| spin_lock_bh(&sdata->cleanup_stations_lock); | |
| while (!list_empty(&sdata->cleanup_stations)) { | |
| sta = list_first_entry(&sdata->cleanup_stations, | |
| struct sta_info, list); | |
| list_del(&sta->list); | |
| spin_unlock_bh(&sdata->cleanup_stations_lock); | |
| cleanup_single_sta(sta); | |
| spin_lock_bh(&sdata->cleanup_stations_lock); | |
| } | |
| spin_unlock_bh(&sdata->cleanup_stations_lock); | |
| } | |
| static void free_sta_rcu(struct rcu_head *h) | |
| { | |
| struct sta_info *sta = container_of(h, struct sta_info, rcu_head); | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| spin_lock(&sdata->cleanup_stations_lock); | |
| list_add_tail(&sta->list, &sdata->cleanup_stations); | |
| spin_unlock(&sdata->cleanup_stations_lock); | |
| ieee80211_queue_work(&sdata->local->hw, &sdata->cleanup_stations_wk); | |
| } | |
| /* protected by RCU */ | |
| struct sta_info *sta_info_get(struct ieee80211_sub_if_data *sdata, | |
| const u8 *addr) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct sta_info *sta; | |
| sta = rcu_dereference_check(local->sta_hash[STA_HASH(addr)], | |
| lockdep_is_held(&local->sta_mtx)); | |
| while (sta) { | |
| if (sta->sdata == sdata && | |
| ether_addr_equal(sta->sta.addr, addr)) | |
| break; | |
| sta = rcu_dereference_check(sta->hnext, | |
| lockdep_is_held(&local->sta_mtx)); | |
| } | |
| return sta; | |
| } | |
| /* | |
| * Get sta info either from the specified interface | |
| * or from one of its vlans | |
| */ | |
| struct sta_info *sta_info_get_bss(struct ieee80211_sub_if_data *sdata, | |
| const u8 *addr) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct sta_info *sta; | |
| sta = rcu_dereference_check(local->sta_hash[STA_HASH(addr)], | |
| lockdep_is_held(&local->sta_mtx)); | |
| while (sta) { | |
| if ((sta->sdata == sdata || | |
| (sta->sdata->bss && sta->sdata->bss == sdata->bss)) && | |
| ether_addr_equal(sta->sta.addr, addr)) | |
| break; | |
| sta = rcu_dereference_check(sta->hnext, | |
| lockdep_is_held(&local->sta_mtx)); | |
| } | |
| return sta; | |
| } | |
| struct sta_info *sta_info_get_by_idx(struct ieee80211_sub_if_data *sdata, | |
| int idx) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct sta_info *sta; | |
| int i = 0; | |
| list_for_each_entry_rcu(sta, &local->sta_list, list) { | |
| if (sdata != sta->sdata) | |
| continue; | |
| if (i < idx) { | |
| ++i; | |
| continue; | |
| } | |
| return sta; | |
| } | |
| return NULL; | |
| } | |
| /** | |
| * sta_info_free - free STA | |
| * | |
| * @local: pointer to the global information | |
| * @sta: STA info to free | |
| * | |
| * This function must undo everything done by sta_info_alloc() | |
| * that may happen before sta_info_insert(). It may only be | |
| * called when sta_info_insert() has not been attempted (and | |
| * if that fails, the station is freed anyway.) | |
| */ | |
| void sta_info_free(struct ieee80211_local *local, struct sta_info *sta) | |
| { | |
| if (sta->rate_ctrl) | |
| rate_control_free_sta(sta); | |
| sta_dbg(sta->sdata, "Destroyed STA %pM\n", sta->sta.addr); | |
| kfree(sta); | |
| } | |
| /* Caller must hold local->sta_mtx */ | |
| static void sta_info_hash_add(struct ieee80211_local *local, | |
| struct sta_info *sta) | |
| { | |
| lockdep_assert_held(&local->sta_mtx); | |
| sta->hnext = local->sta_hash[STA_HASH(sta->sta.addr)]; | |
| rcu_assign_pointer(local->sta_hash[STA_HASH(sta->sta.addr)], sta); | |
| } | |
| static void sta_unblock(struct work_struct *wk) | |
| { | |
| struct sta_info *sta; | |
| sta = container_of(wk, struct sta_info, drv_unblock_wk); | |
| if (sta->dead) | |
| return; | |
| if (!test_sta_flag(sta, WLAN_STA_PS_STA)) { | |
| local_bh_disable(); | |
| ieee80211_sta_ps_deliver_wakeup(sta); | |
| local_bh_enable(); | |
| } else if (test_and_clear_sta_flag(sta, WLAN_STA_PSPOLL)) { | |
| clear_sta_flag(sta, WLAN_STA_PS_DRIVER); | |
| local_bh_disable(); | |
| ieee80211_sta_ps_deliver_poll_response(sta); | |
| local_bh_enable(); | |
| } else if (test_and_clear_sta_flag(sta, WLAN_STA_UAPSD)) { | |
| clear_sta_flag(sta, WLAN_STA_PS_DRIVER); | |
| local_bh_disable(); | |
| ieee80211_sta_ps_deliver_uapsd(sta); | |
| local_bh_enable(); | |
| } else | |
| clear_sta_flag(sta, WLAN_STA_PS_DRIVER); | |
| } | |
| static int sta_prepare_rate_control(struct ieee80211_local *local, | |
| struct sta_info *sta, gfp_t gfp) | |
| { | |
| if (local->hw.flags & IEEE80211_HW_HAS_RATE_CONTROL) | |
| return 0; | |
| sta->rate_ctrl = local->rate_ctrl; | |
| sta->rate_ctrl_priv = rate_control_alloc_sta(sta->rate_ctrl, | |
| &sta->sta, gfp); | |
| if (!sta->rate_ctrl_priv) | |
| return -ENOMEM; | |
| return 0; | |
| } | |
| struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, | |
| const u8 *addr, gfp_t gfp) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct sta_info *sta; | |
| struct timespec uptime; | |
| int i; | |
| sta = kzalloc(sizeof(*sta) + local->hw.sta_data_size, gfp); | |
| if (!sta) | |
| return NULL; | |
| spin_lock_init(&sta->lock); | |
| INIT_WORK(&sta->drv_unblock_wk, sta_unblock); | |
| INIT_WORK(&sta->ampdu_mlme.work, ieee80211_ba_session_work); | |
| mutex_init(&sta->ampdu_mlme.mtx); | |
| #ifdef CONFIG_MAC80211_MESH | |
| if (ieee80211_vif_is_mesh(&sdata->vif) && | |
| !sdata->u.mesh.user_mpm) | |
| init_timer(&sta->plink_timer); | |
| sta->nonpeer_pm = NL80211_MESH_POWER_ACTIVE; | |
| #endif | |
| memcpy(sta->sta.addr, addr, ETH_ALEN); | |
| sta->local = local; | |
| sta->sdata = sdata; | |
| sta->last_rx = jiffies; | |
| sta->sta_state = IEEE80211_STA_NONE; | |
| do_posix_clock_monotonic_gettime(&uptime); | |
| sta->last_connected = uptime.tv_sec; | |
| ewma_init(&sta->avg_signal, 1024, 8); | |
| for (i = 0; i < ARRAY_SIZE(sta->chain_signal_avg); i++) | |
| ewma_init(&sta->chain_signal_avg[i], 1024, 8); | |
| if (sta_prepare_rate_control(local, sta, gfp)) { | |
| kfree(sta); | |
| return NULL; | |
| } | |
| for (i = 0; i < IEEE80211_NUM_TIDS; i++) { | |
| /* | |
| * timer_to_tid must be initialized with identity mapping | |
| * to enable session_timer's data differentiation. See | |
| * sta_rx_agg_session_timer_expired for usage. | |
| */ | |
| sta->timer_to_tid[i] = i; | |
| } | |
| for (i = 0; i < IEEE80211_NUM_ACS; i++) { | |
| skb_queue_head_init(&sta->ps_tx_buf[i]); | |
| skb_queue_head_init(&sta->tx_filtered[i]); | |
| } | |
| for (i = 0; i < IEEE80211_NUM_TIDS; i++) | |
| sta->last_seq_ctrl[i] = cpu_to_le16(USHRT_MAX); | |
| sta->sta.smps_mode = IEEE80211_SMPS_OFF; | |
| sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr); | |
| return sta; | |
| } | |
| static int sta_info_insert_check(struct sta_info *sta) | |
| { | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| /* | |
| * Can't be a WARN_ON because it can be triggered through a race: | |
| * something inserts a STA (on one CPU) without holding the RTNL | |
| * and another CPU turns off the net device. | |
| */ | |
| if (unlikely(!ieee80211_sdata_running(sdata))) | |
| return -ENETDOWN; | |
| if (WARN_ON(ether_addr_equal(sta->sta.addr, sdata->vif.addr) || | |
| is_multicast_ether_addr(sta->sta.addr))) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| static int sta_info_insert_drv_state(struct ieee80211_local *local, | |
| struct ieee80211_sub_if_data *sdata, | |
| struct sta_info *sta) | |
| { | |
| enum ieee80211_sta_state state; | |
| int err = 0; | |
| for (state = IEEE80211_STA_NOTEXIST; state < sta->sta_state; state++) { | |
| err = drv_sta_state(local, sdata, sta, state, state + 1); | |
| if (err) | |
| break; | |
| } | |
| if (!err) { | |
| /* | |
| * Drivers using legacy sta_add/sta_remove callbacks only | |
| * get uploaded set to true after sta_add is called. | |
| */ | |
| if (!local->ops->sta_add) | |
| sta->uploaded = true; | |
| return 0; | |
| } | |
| if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { | |
| sdata_info(sdata, | |
| "failed to move IBSS STA %pM to state %d (%d) - keeping it anyway\n", | |
| sta->sta.addr, state + 1, err); | |
| err = 0; | |
| } | |
| /* unwind on error */ | |
| for (; state > IEEE80211_STA_NOTEXIST; state--) | |
| WARN_ON(drv_sta_state(local, sdata, sta, state, state - 1)); | |
| return err; | |
| } | |
| /* | |
| * should be called with sta_mtx locked | |
| * this function replaces the mutex lock | |
| * with a RCU lock | |
| */ | |
| static int sta_info_insert_finish(struct sta_info *sta) __acquires(RCU) | |
| { | |
| struct ieee80211_local *local = sta->local; | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| struct station_info sinfo; | |
| int err = 0; | |
| lockdep_assert_held(&local->sta_mtx); | |
| /* check if STA exists already */ | |
| if (sta_info_get_bss(sdata, sta->sta.addr)) { | |
| err = -EEXIST; | |
| goto out_err; | |
| } | |
| /* notify driver */ | |
| err = sta_info_insert_drv_state(local, sdata, sta); | |
| if (err) | |
| goto out_err; | |
| local->num_sta++; | |
| local->sta_generation++; | |
| smp_mb(); | |
| /* make the station visible */ | |
| sta_info_hash_add(local, sta); | |
| list_add_rcu(&sta->list, &local->sta_list); | |
| set_sta_flag(sta, WLAN_STA_INSERTED); | |
| ieee80211_sta_debugfs_add(sta); | |
| rate_control_add_sta_debugfs(sta); | |
| memset(&sinfo, 0, sizeof(sinfo)); | |
| sinfo.filled = 0; | |
| sinfo.generation = local->sta_generation; | |
| cfg80211_new_sta(sdata->dev, sta->sta.addr, &sinfo, GFP_KERNEL); | |
| sta_dbg(sdata, "Inserted STA %pM\n", sta->sta.addr); | |
| /* move reference to rcu-protected */ | |
| rcu_read_lock(); | |
| mutex_unlock(&local->sta_mtx); | |
| if (ieee80211_vif_is_mesh(&sdata->vif)) | |
| mesh_accept_plinks_update(sdata); | |
| return 0; | |
| out_err: | |
| mutex_unlock(&local->sta_mtx); | |
| rcu_read_lock(); | |
| return err; | |
| } | |
| int sta_info_insert_rcu(struct sta_info *sta) __acquires(RCU) | |
| { | |
| struct ieee80211_local *local = sta->local; | |
| int err = 0; | |
| might_sleep(); | |
| err = sta_info_insert_check(sta); | |
| if (err) { | |
| rcu_read_lock(); | |
| goto out_free; | |
| } | |
| mutex_lock(&local->sta_mtx); | |
| err = sta_info_insert_finish(sta); | |
| if (err) | |
| goto out_free; | |
| return 0; | |
| out_free: | |
| BUG_ON(!err); | |
| sta_info_free(local, sta); | |
| return err; | |
| } | |
| int sta_info_insert(struct sta_info *sta) | |
| { | |
| int err = sta_info_insert_rcu(sta); | |
| rcu_read_unlock(); | |
| return err; | |
| } | |
| static inline void __bss_tim_set(u8 *tim, u16 id) | |
| { | |
| /* | |
| * This format has been mandated by the IEEE specifications, | |
| * so this line may not be changed to use the __set_bit() format. | |
| */ | |
| tim[id / 8] |= (1 << (id % 8)); | |
| } | |
| static inline void __bss_tim_clear(u8 *tim, u16 id) | |
| { | |
| /* | |
| * This format has been mandated by the IEEE specifications, | |
| * so this line may not be changed to use the __clear_bit() format. | |
| */ | |
| tim[id / 8] &= ~(1 << (id % 8)); | |
| } | |
| static inline bool __bss_tim_get(u8 *tim, u16 id) | |
| { | |
| /* | |
| * This format has been mandated by the IEEE specifications, | |
| * so this line may not be changed to use the test_bit() format. | |
| */ | |
| return tim[id / 8] & (1 << (id % 8)); | |
| } | |
| static unsigned long ieee80211_tids_for_ac(int ac) | |
| { | |
| /* If we ever support TIDs > 7, this obviously needs to be adjusted */ | |
| switch (ac) { | |
| case IEEE80211_AC_VO: | |
| return BIT(6) | BIT(7); | |
| case IEEE80211_AC_VI: | |
| return BIT(4) | BIT(5); | |
| case IEEE80211_AC_BE: | |
| return BIT(0) | BIT(3); | |
| case IEEE80211_AC_BK: | |
| return BIT(1) | BIT(2); | |
| default: | |
| WARN_ON(1); | |
| return 0; | |
| } | |
| } | |
| void sta_info_recalc_tim(struct sta_info *sta) | |
| { | |
| struct ieee80211_local *local = sta->local; | |
| struct ps_data *ps; | |
| bool indicate_tim = false; | |
| u8 ignore_for_tim = sta->sta.uapsd_queues; | |
| int ac; | |
| u16 id; | |
| if (sta->sdata->vif.type == NL80211_IFTYPE_AP || | |
| sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { | |
| if (WARN_ON_ONCE(!sta->sdata->bss)) | |
| return; | |
| ps = &sta->sdata->bss->ps; | |
| id = sta->sta.aid; | |
| #ifdef CONFIG_MAC80211_MESH | |
| } else if (ieee80211_vif_is_mesh(&sta->sdata->vif)) { | |
| ps = &sta->sdata->u.mesh.ps; | |
| /* TIM map only for PLID <= IEEE80211_MAX_AID */ | |
| id = le16_to_cpu(sta->plid) % IEEE80211_MAX_AID; | |
| #endif | |
| } else { | |
| return; | |
| } | |
| /* No need to do anything if the driver does all */ | |
| if (local->hw.flags & IEEE80211_HW_AP_LINK_PS) | |
| return; | |
| if (sta->dead) | |
| goto done; | |
| /* | |
| * If all ACs are delivery-enabled then we should build | |
| * the TIM bit for all ACs anyway; if only some are then | |
| * we ignore those and build the TIM bit using only the | |
| * non-enabled ones. | |
| */ | |
| if (ignore_for_tim == BIT(IEEE80211_NUM_ACS) - 1) | |
| ignore_for_tim = 0; | |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | |
| unsigned long tids; | |
| if (ignore_for_tim & BIT(ac)) | |
| continue; | |
| indicate_tim |= !skb_queue_empty(&sta->tx_filtered[ac]) || | |
| !skb_queue_empty(&sta->ps_tx_buf[ac]); | |
| if (indicate_tim) | |
| break; | |
| tids = ieee80211_tids_for_ac(ac); | |
| indicate_tim |= | |
| sta->driver_buffered_tids & tids; | |
| } | |
| done: | |
| spin_lock_bh(&local->tim_lock); | |
| if (indicate_tim == __bss_tim_get(ps->tim, id)) | |
| goto out_unlock; | |
| if (indicate_tim) | |
| __bss_tim_set(ps->tim, id); | |
| else | |
| __bss_tim_clear(ps->tim, id); | |
| if (local->ops->set_tim) { | |
| local->tim_in_locked_section = true; | |
| drv_set_tim(local, &sta->sta, indicate_tim); | |
| local->tim_in_locked_section = false; | |
| } | |
| out_unlock: | |
| spin_unlock_bh(&local->tim_lock); | |
| } | |
| static bool sta_info_buffer_expired(struct sta_info *sta, struct sk_buff *skb) | |
| { | |
| struct ieee80211_tx_info *info; | |
| int timeout; | |
| if (!skb) | |
| return false; | |
| info = IEEE80211_SKB_CB(skb); | |
| /* Timeout: (2 * listen_interval * beacon_int * 1024 / 1000000) sec */ | |
| timeout = (sta->listen_interval * | |
| sta->sdata->vif.bss_conf.beacon_int * | |
| 32 / 15625) * HZ; | |
| if (timeout < STA_TX_BUFFER_EXPIRE) | |
| timeout = STA_TX_BUFFER_EXPIRE; | |
| return time_after(jiffies, info->control.jiffies + timeout); | |
| } | |
| static bool sta_info_cleanup_expire_buffered_ac(struct ieee80211_local *local, | |
| struct sta_info *sta, int ac) | |
| { | |
| unsigned long flags; | |
| struct sk_buff *skb; | |
| /* | |
| * First check for frames that should expire on the filtered | |
| * queue. Frames here were rejected by the driver and are on | |
| * a separate queue to avoid reordering with normal PS-buffered | |
| * frames. They also aren't accounted for right now in the | |
| * total_ps_buffered counter. | |
| */ | |
| for (;;) { | |
| spin_lock_irqsave(&sta->tx_filtered[ac].lock, flags); | |
| skb = skb_peek(&sta->tx_filtered[ac]); | |
| if (sta_info_buffer_expired(sta, skb)) | |
| skb = __skb_dequeue(&sta->tx_filtered[ac]); | |
| else | |
| skb = NULL; | |
| spin_unlock_irqrestore(&sta->tx_filtered[ac].lock, flags); | |
| /* | |
| * Frames are queued in order, so if this one | |
| * hasn't expired yet we can stop testing. If | |
| * we actually reached the end of the queue we | |
| * also need to stop, of course. | |
| */ | |
| if (!skb) | |
| break; | |
| ieee80211_free_txskb(&local->hw, skb); | |
| } | |
| /* | |
| * Now also check the normal PS-buffered queue, this will | |
| * only find something if the filtered queue was emptied | |
| * since the filtered frames are all before the normal PS | |
| * buffered frames. | |
| */ | |
| for (;;) { | |
| spin_lock_irqsave(&sta->ps_tx_buf[ac].lock, flags); | |
| skb = skb_peek(&sta->ps_tx_buf[ac]); | |
| if (sta_info_buffer_expired(sta, skb)) | |
| skb = __skb_dequeue(&sta->ps_tx_buf[ac]); | |
| else | |
| skb = NULL; | |
| spin_unlock_irqrestore(&sta->ps_tx_buf[ac].lock, flags); | |
| /* | |
| * frames are queued in order, so if this one | |
| * hasn't expired yet (or we reached the end of | |
| * the queue) we can stop testing | |
| */ | |
| if (!skb) | |
| break; | |
| local->total_ps_buffered--; | |
| ps_dbg(sta->sdata, "Buffered frame expired (STA %pM)\n", | |
| sta->sta.addr); | |
| ieee80211_free_txskb(&local->hw, skb); | |
| } | |
| /* | |
| * Finally, recalculate the TIM bit for this station -- it might | |
| * now be clear because the station was too slow to retrieve its | |
| * frames. | |
| */ | |
| sta_info_recalc_tim(sta); | |
| /* | |
| * Return whether there are any frames still buffered, this is | |
| * used to check whether the cleanup timer still needs to run, | |
| * if there are no frames we don't need to rearm the timer. | |
| */ | |
| return !(skb_queue_empty(&sta->ps_tx_buf[ac]) && | |
| skb_queue_empty(&sta->tx_filtered[ac])); | |
| } | |
| static bool sta_info_cleanup_expire_buffered(struct ieee80211_local *local, | |
| struct sta_info *sta) | |
| { | |
| bool have_buffered = false; | |
| int ac; | |
| /* This is only necessary for stations on BSS/MBSS interfaces */ | |
| if (!sta->sdata->bss && | |
| !ieee80211_vif_is_mesh(&sta->sdata->vif)) | |
| return false; | |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) | |
| have_buffered |= | |
| sta_info_cleanup_expire_buffered_ac(local, sta, ac); | |
| return have_buffered; | |
| } | |
| int __must_check __sta_info_destroy(struct sta_info *sta) | |
| { | |
| struct ieee80211_local *local; | |
| struct ieee80211_sub_if_data *sdata; | |
| int ret; | |
| might_sleep(); | |
| if (!sta) | |
| return -ENOENT; | |
| local = sta->local; | |
| sdata = sta->sdata; | |
| lockdep_assert_held(&local->sta_mtx); | |
| /* | |
| * Before removing the station from the driver and | |
| * rate control, it might still start new aggregation | |
| * sessions -- block that to make sure the tear-down | |
| * will be sufficient. | |
| */ | |
| set_sta_flag(sta, WLAN_STA_BLOCK_BA); | |
| ieee80211_sta_tear_down_BA_sessions(sta, AGG_STOP_DESTROY_STA); | |
| ret = sta_info_hash_del(local, sta); | |
| if (ret) | |
| return ret; | |
| list_del_rcu(&sta->list); | |
| /* this always calls synchronize_net() */ | |
| ieee80211_free_sta_keys(local, sta); | |
| sta->dead = true; | |
| local->num_sta--; | |
| local->sta_generation++; | |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | |
| RCU_INIT_POINTER(sdata->u.vlan.sta, NULL); | |
| while (sta->sta_state > IEEE80211_STA_NONE) { | |
| ret = sta_info_move_state(sta, sta->sta_state - 1); | |
| if (ret) { | |
| WARN_ON_ONCE(1); | |
| break; | |
| } | |
| } | |
| if (sta->uploaded) { | |
| ret = drv_sta_state(local, sdata, sta, IEEE80211_STA_NONE, | |
| IEEE80211_STA_NOTEXIST); | |
| WARN_ON_ONCE(ret != 0); | |
| } | |
| sta_dbg(sdata, "Removed STA %pM\n", sta->sta.addr); | |
| cfg80211_del_sta(sdata->dev, sta->sta.addr, GFP_KERNEL); | |
| rate_control_remove_sta_debugfs(sta); | |
| ieee80211_sta_debugfs_remove(sta); | |
| call_rcu(&sta->rcu_head, free_sta_rcu); | |
| return 0; | |
| } | |
| int sta_info_destroy_addr(struct ieee80211_sub_if_data *sdata, const u8 *addr) | |
| { | |
| struct sta_info *sta; | |
| int ret; | |
| mutex_lock(&sdata->local->sta_mtx); | |
| sta = sta_info_get(sdata, addr); | |
| ret = __sta_info_destroy(sta); | |
| mutex_unlock(&sdata->local->sta_mtx); | |
| return ret; | |
| } | |
| int sta_info_destroy_addr_bss(struct ieee80211_sub_if_data *sdata, | |
| const u8 *addr) | |
| { | |
| struct sta_info *sta; | |
| int ret; | |
| mutex_lock(&sdata->local->sta_mtx); | |
| sta = sta_info_get_bss(sdata, addr); | |
| ret = __sta_info_destroy(sta); | |
| mutex_unlock(&sdata->local->sta_mtx); | |
| return ret; | |
| } | |
| static void sta_info_cleanup(unsigned long data) | |
| { | |
| struct ieee80211_local *local = (struct ieee80211_local *) data; | |
| struct sta_info *sta; | |
| bool timer_needed = false; | |
| rcu_read_lock(); | |
| list_for_each_entry_rcu(sta, &local->sta_list, list) | |
| if (sta_info_cleanup_expire_buffered(local, sta)) | |
| timer_needed = true; | |
| rcu_read_unlock(); | |
| if (local->quiescing) | |
| return; | |
| if (!timer_needed) | |
| return; | |
| mod_timer(&local->sta_cleanup, | |
| round_jiffies(jiffies + STA_INFO_CLEANUP_INTERVAL)); | |
| } | |
| void sta_info_init(struct ieee80211_local *local) | |
| { | |
| spin_lock_init(&local->tim_lock); | |
| mutex_init(&local->sta_mtx); | |
| INIT_LIST_HEAD(&local->sta_list); | |
| setup_timer(&local->sta_cleanup, sta_info_cleanup, | |
| (unsigned long)local); | |
| } | |
| void sta_info_stop(struct ieee80211_local *local) | |
| { | |
| del_timer_sync(&local->sta_cleanup); | |
| } | |
| int sta_info_flush_defer(struct ieee80211_sub_if_data *sdata) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct sta_info *sta, *tmp; | |
| int ret = 0; | |
| might_sleep(); | |
| mutex_lock(&local->sta_mtx); | |
| list_for_each_entry_safe(sta, tmp, &local->sta_list, list) { | |
| if (sdata == sta->sdata) { | |
| WARN_ON(__sta_info_destroy(sta)); | |
| ret++; | |
| } | |
| } | |
| mutex_unlock(&local->sta_mtx); | |
| return ret; | |
| } | |
| void sta_info_flush_cleanup(struct ieee80211_sub_if_data *sdata) | |
| { | |
| ieee80211_cleanup_sdata_stas(sdata); | |
| cancel_work_sync(&sdata->cleanup_stations_wk); | |
| } | |
| void ieee80211_sta_expire(struct ieee80211_sub_if_data *sdata, | |
| unsigned long exp_time) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct sta_info *sta, *tmp; | |
| mutex_lock(&local->sta_mtx); | |
| list_for_each_entry_safe(sta, tmp, &local->sta_list, list) { | |
| if (sdata != sta->sdata) | |
| continue; | |
| if (time_after(jiffies, sta->last_rx + exp_time)) { | |
| sta_dbg(sta->sdata, "expiring inactive STA %pM\n", | |
| sta->sta.addr); | |
| if (ieee80211_vif_is_mesh(&sdata->vif) && | |
| test_sta_flag(sta, WLAN_STA_PS_STA)) | |
| atomic_dec(&sdata->u.mesh.ps.num_sta_ps); | |
| WARN_ON(__sta_info_destroy(sta)); | |
| } | |
| } | |
| mutex_unlock(&local->sta_mtx); | |
| } | |
| struct ieee80211_sta *ieee80211_find_sta_by_ifaddr(struct ieee80211_hw *hw, | |
| const u8 *addr, | |
| const u8 *localaddr) | |
| { | |
| struct sta_info *sta, *nxt; | |
| /* | |
| * Just return a random station if localaddr is NULL | |
| * ... first in list. | |
| */ | |
| for_each_sta_info(hw_to_local(hw), addr, sta, nxt) { | |
| if (localaddr && | |
| !ether_addr_equal(sta->sdata->vif.addr, localaddr)) | |
| continue; | |
| if (!sta->uploaded) | |
| return NULL; | |
| return &sta->sta; | |
| } | |
| return NULL; | |
| } | |
| EXPORT_SYMBOL_GPL(ieee80211_find_sta_by_ifaddr); | |
| struct ieee80211_sta *ieee80211_find_sta(struct ieee80211_vif *vif, | |
| const u8 *addr) | |
| { | |
| struct sta_info *sta; | |
| if (!vif) | |
| return NULL; | |
| sta = sta_info_get_bss(vif_to_sdata(vif), addr); | |
| if (!sta) | |
| return NULL; | |
| if (!sta->uploaded) | |
| return NULL; | |
| return &sta->sta; | |
| } | |
| EXPORT_SYMBOL(ieee80211_find_sta); | |
| static void clear_sta_ps_flags(void *_sta) | |
| { | |
| struct sta_info *sta = _sta; | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| struct ps_data *ps; | |
| if (sdata->vif.type == NL80211_IFTYPE_AP || | |
| sdata->vif.type == NL80211_IFTYPE_AP_VLAN) | |
| ps = &sdata->bss->ps; | |
| else if (ieee80211_vif_is_mesh(&sdata->vif)) | |
| ps = &sdata->u.mesh.ps; | |
| else | |
| return; | |
| clear_sta_flag(sta, WLAN_STA_PS_DRIVER); | |
| if (test_and_clear_sta_flag(sta, WLAN_STA_PS_STA)) | |
| atomic_dec(&ps->num_sta_ps); | |
| } | |
| /* powersave support code */ | |
| void ieee80211_sta_ps_deliver_wakeup(struct sta_info *sta) | |
| { | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| struct ieee80211_local *local = sdata->local; | |
| struct sk_buff_head pending; | |
| int filtered = 0, buffered = 0, ac; | |
| unsigned long flags; | |
| clear_sta_flag(sta, WLAN_STA_SP); | |
| BUILD_BUG_ON(BITS_TO_LONGS(IEEE80211_NUM_TIDS) > 1); | |
| sta->driver_buffered_tids = 0; | |
| if (!(local->hw.flags & IEEE80211_HW_AP_LINK_PS)) | |
| drv_sta_notify(local, sdata, STA_NOTIFY_AWAKE, &sta->sta); | |
| skb_queue_head_init(&pending); | |
| /* Send all buffered frames to the station */ | |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | |
| int count = skb_queue_len(&pending), tmp; | |
| spin_lock_irqsave(&sta->tx_filtered[ac].lock, flags); | |
| skb_queue_splice_tail_init(&sta->tx_filtered[ac], &pending); | |
| spin_unlock_irqrestore(&sta->tx_filtered[ac].lock, flags); | |
| tmp = skb_queue_len(&pending); | |
| filtered += tmp - count; | |
| count = tmp; | |
| spin_lock_irqsave(&sta->ps_tx_buf[ac].lock, flags); | |
| skb_queue_splice_tail_init(&sta->ps_tx_buf[ac], &pending); | |
| spin_unlock_irqrestore(&sta->ps_tx_buf[ac].lock, flags); | |
| tmp = skb_queue_len(&pending); | |
| buffered += tmp - count; | |
| } | |
| ieee80211_add_pending_skbs_fn(local, &pending, clear_sta_ps_flags, sta); | |
| local->total_ps_buffered -= buffered; | |
| sta_info_recalc_tim(sta); | |
| ps_dbg(sdata, | |
| "STA %pM aid %d sending %d filtered/%d PS frames since STA not sleeping anymore\n", | |
| sta->sta.addr, sta->sta.aid, filtered, buffered); | |
| } | |
| static void ieee80211_send_null_response(struct ieee80211_sub_if_data *sdata, | |
| struct sta_info *sta, int tid, | |
| enum ieee80211_frame_release_type reason) | |
| { | |
| struct ieee80211_local *local = sdata->local; | |
| struct ieee80211_qos_hdr *nullfunc; | |
| struct sk_buff *skb; | |
| int size = sizeof(*nullfunc); | |
| __le16 fc; | |
| bool qos = test_sta_flag(sta, WLAN_STA_WME); | |
| struct ieee80211_tx_info *info; | |
| struct ieee80211_chanctx_conf *chanctx_conf; | |
| if (qos) { | |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | | |
| IEEE80211_STYPE_QOS_NULLFUNC | | |
| IEEE80211_FCTL_FROMDS); | |
| } else { | |
| size -= 2; | |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | | |
| IEEE80211_STYPE_NULLFUNC | | |
| IEEE80211_FCTL_FROMDS); | |
| } | |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + size); | |
| if (!skb) | |
| return; | |
| skb_reserve(skb, local->hw.extra_tx_headroom); | |
| nullfunc = (void *) skb_put(skb, size); | |
| nullfunc->frame_control = fc; | |
| nullfunc->duration_id = 0; | |
| memcpy(nullfunc->addr1, sta->sta.addr, ETH_ALEN); | |
| memcpy(nullfunc->addr2, sdata->vif.addr, ETH_ALEN); | |
| memcpy(nullfunc->addr3, sdata->vif.addr, ETH_ALEN); | |
| skb->priority = tid; | |
| skb_set_queue_mapping(skb, ieee802_1d_to_ac[tid]); | |
| if (qos) { | |
| nullfunc->qos_ctrl = cpu_to_le16(tid); | |
| if (reason == IEEE80211_FRAME_RELEASE_UAPSD) | |
| nullfunc->qos_ctrl |= | |
| cpu_to_le16(IEEE80211_QOS_CTL_EOSP); | |
| } | |
| info = IEEE80211_SKB_CB(skb); | |
| /* | |
| * Tell TX path to send this frame even though the | |
| * STA may still remain is PS mode after this frame | |
| * exchange. Also set EOSP to indicate this packet | |
| * ends the poll/service period. | |
| */ | |
| info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER | | |
| IEEE80211_TX_CTL_PS_RESPONSE | | |
| IEEE80211_TX_STATUS_EOSP | | |
| IEEE80211_TX_CTL_REQ_TX_STATUS; | |
| drv_allow_buffered_frames(local, sta, BIT(tid), 1, reason, false); | |
| skb->dev = sdata->dev; | |
| rcu_read_lock(); | |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); | |
| if (WARN_ON(!chanctx_conf)) { | |
| rcu_read_unlock(); | |
| kfree_skb(skb); | |
| return; | |
| } | |
| ieee80211_xmit(sdata, skb, chanctx_conf->def.chan->band); | |
| rcu_read_unlock(); | |
| } | |
| static void | |
| ieee80211_sta_ps_deliver_response(struct sta_info *sta, | |
| int n_frames, u8 ignored_acs, | |
| enum ieee80211_frame_release_type reason) | |
| { | |
| struct ieee80211_sub_if_data *sdata = sta->sdata; | |
| struct ieee80211_local *local = sdata->local; | |
| bool found = false; | |
| bool more_data = false; | |
| int ac; | |
| unsigned long driver_release_tids = 0; | |
| struct sk_buff_head frames; | |
| /* Service or PS-Poll period starts */ | |
| set_sta_flag(sta, WLAN_STA_SP); | |
| __skb_queue_head_init(&frames); | |
| /* | |
| * Get response frame(s) and more data bit for it. | |
| */ | |
| for (ac = 0; ac < IEEE80211_NUM_ACS; ac++) { | |
| unsigned long tids; | |
| if (ignored_acs & BIT(ac)) | |
| continue; | |
| tids = ieee80211_tids_for_ac(ac); | |
| if (!found) { | |
| driver_release_tids = sta->driver_buffered_tids & tids; | |
| if (driver_release_tids) { | |
| found = true; | |
| } else { | |
| struct sk_buff *skb; | |
| while (n_frames > 0) { | |
| skb = skb_dequeue(&sta->tx_filtered[ac]); | |
| if (!skb) { | |
| skb = skb_dequeue( | |
| &sta->ps_tx_buf[ac]); | |
| if (skb) | |
| local->total_ps_buffered--; | |
| } | |
| if (!skb) | |
| break; | |
| n_frames--; | |
| found = true; | |
| __skb_queue_tail(&frames, skb); | |
| } | |
| } | |
| /* | |
| * If the driver has data on more than one TID then | |
| * certainly there's more data if we release just a | |
| * single frame now (from a single TID). | |
| */ | |
| if (reason == IEEE80211_FRAME_RELEASE_PSPOLL && | |
| hweight16(driver_release_tids) > 1) { | |
| more_data = true; | |
| driver_release_tids = | |
| BIT(ffs(driver_release_tids) - 1); | |
| break; | |
| } | |
| } | |
| if (!skb_queue_empty(&sta->tx_filtered[ac]) || | |
| !skb_queue_empty(&sta->ps_tx_buf[ac])) { | |
| more_data = true; | |
| break; | |
| } | |
| } | |
| if (!found) { | |
| int tid; | |
| /* | |
| * For PS-Poll, this can only happen due to a race condition | |
| * when we set the TIM bit and the station notices it, but | |
| * before it can poll for the frame we expire it. | |
| * | |
| * For uAPSD, this is said in the standard (11.2.1.5 h): | |
| * At each unscheduled SP for a non-AP STA, the AP shall | |
| * attempt to transmit at least one MSDU or MMPDU, but no | |
| * more than the value specified in the Max SP Length field | |
| * in the QoS Capability element from delivery-enabled ACs, | |
| * that are destined for the non-AP STA. | |
| * | |
| * Since we have no other MSDU/MMPDU, transmit a QoS null frame. | |
| */ | |
| /* This will evaluate to 1, 3, 5 or 7. */ | |
| tid = 7 - ((ffs(~ignored_acs) - 1) << 1); | |
| ieee80211_send_null_response(sdata, sta, tid, reason); | |
| return; | |
| } | |
| if (!driver_release_tids) { | |
| struct sk_buff_head pending; | |
| struct sk_buff *skb; | |
| int num = 0; | |
| u16 tids = 0; | |
| skb_queue_head_init(&pending); | |
| while ((skb = __skb_dequeue(&frames))) { | |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); | |
| struct ieee80211_hdr *hdr = (void *) skb->data; | |
| u8 *qoshdr = NULL; | |
| num++; | |
| /* | |
| * Tell TX path to send this frame even though the | |
| * STA may still remain is PS mode after this frame | |
| * exchange. | |
| */ | |
| info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER | | |
| IEEE80211_TX_CTL_PS_RESPONSE; | |
| /* | |
| * Use MoreData flag to indicate whether there are | |
| * more buffered frames for this STA | |
| */ | |
| if (more_data || !skb_queue_empty(&frames)) | |
| hdr->frame_control |= | |
| cpu_to_le16(IEEE80211_FCTL_MOREDATA); | |
| else | |
| hdr->frame_control &= | |
| cpu_to_le16(~IEEE80211_FCTL_MOREDATA); | |
| if (ieee80211_is_data_qos(hdr->frame_control) || | |
| ieee80211_is_qos_nullfunc(hdr->frame_control)) | |
| qoshdr = ieee80211_get_qos_ctl(hdr); | |
| /* end service period after last frame */ | |
| if (skb_queue_empty(&frames)) { | |
| if (reason == IEEE80211_FRAME_RELEASE_UAPSD && | |
| qoshdr) | |
| *qoshdr |= IEEE80211_QOS_CTL_EOSP; | |
| info->flags |= IEEE80211_TX_STATUS_EOSP | | |
| IEEE80211_TX_CTL_REQ_TX_STATUS; | |
| } | |
| if (qoshdr) | |
| tids |= BIT(*qoshdr & IEEE80211_QOS_CTL_TID_MASK); | |
| else | |
| tids |= BIT(0); | |
| __skb_queue_tail(&pending, skb); | |
| } | |
| drv_allow_buffered_frames(local, sta, tids, num, | |
| reason, more_data); | |
| ieee80211_add_pending_skbs(local, &pending); | |
| sta_info_recalc_tim(sta); | |
| } else { | |
| /* | |
| * We need to release a frame that is buffered somewhere in the | |
| * driver ... it'll have to handle that. | |
| * Note that, as per the comment above, it'll also have to see | |
| * if there is more than just one frame on the specific TID that | |
| * we're releasing from, and it needs to set the more-data bit | |
| * accordingly if we tell it that there's no more data. If we do | |
| * tell it there's more data, then of course the more-data bit | |
| * needs to be set anyway. | |
| */ | |
| drv_release_buffered_frames(local, sta, driver_release_tids, | |
| n_frames, reason, more_data); | |
| /* | |
| * Note that we don't recalculate the TIM bit here as it would | |
| * most likely have no effect at all unless the driver told us | |
| * that the TID became empty before returning here from the | |
| * release function. | |
| * Either way, however, when the driver tells us that the TID | |
| * became empty we'll do the TIM recalculation. | |
| */ | |
| } | |
| } | |
| void ieee80211_sta_ps_deliver_poll_response(struct sta_info *sta) | |
| { | |
| u8 ignore_for_response = sta->sta.uapsd_queues; | |
| /* | |
| * If all ACs are delivery-enabled then we should reply | |
| * from any of them, if only some are enabled we reply | |
| * only from the non-enabled ones. | |
| */ | |
| if (ignore_for_response == BIT(IEEE80211_NUM_ACS) - 1) | |
| ignore_for_response = 0; | |
| ieee80211_sta_ps_deliver_response(sta, 1, ignore_for_response, | |
| IEEE80211_FRAME_RELEASE_PSPOLL); | |
| } | |
| void ieee80211_sta_ps_deliver_uapsd(struct sta_info *sta) | |
| { | |
| int n_frames = sta->sta.max_sp; | |
| u8 delivery_enabled = sta->sta.uapsd_queues; | |
| /* | |
| * If we ever grow support for TSPEC this might happen if | |
| * the TSPEC update from hostapd comes in between a trigger | |
| * frame setting WLAN_STA_UAPSD in the RX path and this | |
| * actually getting called. | |
| */ | |
| if (!delivery_enabled) | |
| return; | |
| switch (sta->sta.max_sp) { | |
| case 1: | |
| n_frames = 2; | |
| break; | |
| case 2: | |
| n_frames = 4; | |
| break; | |
| case 3: | |
| n_frames = 6; | |
| break; | |
| case 0: | |
| /* XXX: what is a good value? */ | |
| n_frames = 8; | |
| break; | |
| } | |
| ieee80211_sta_ps_deliver_response(sta, n_frames, ~delivery_enabled, | |
| IEEE80211_FRAME_RELEASE_UAPSD); | |
| } | |
| void ieee80211_sta_block_awake(struct ieee80211_hw *hw, | |
| struct ieee80211_sta *pubsta, bool block) | |
| { | |
| struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | |
| trace_api_sta_block_awake(sta->local, pubsta, block); | |
| if (block) | |
| set_sta_flag(sta, WLAN_STA_PS_DRIVER); | |
| else if (test_sta_flag(sta, WLAN_STA_PS_DRIVER)) | |
| ieee80211_queue_work(hw, &sta->drv_unblock_wk); | |
| } | |
| EXPORT_SYMBOL(ieee80211_sta_block_awake); | |
| void ieee80211_sta_eosp(struct ieee80211_sta *pubsta) | |
| { | |
| struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | |
| struct ieee80211_local *local = sta->local; | |
| trace_api_eosp(local, pubsta); | |
| clear_sta_flag(sta, WLAN_STA_SP); | |
| } | |
| EXPORT_SYMBOL(ieee80211_sta_eosp); | |
| void ieee80211_sta_set_buffered(struct ieee80211_sta *pubsta, | |
| u8 tid, bool buffered) | |
| { | |
| struct sta_info *sta = container_of(pubsta, struct sta_info, sta); | |
| if (WARN_ON(tid >= IEEE80211_NUM_TIDS)) | |
| return; | |
| if (buffered) | |
| set_bit(tid, &sta->driver_buffered_tids); | |
| else | |
| clear_bit(tid, &sta->driver_buffered_tids); | |
| sta_info_recalc_tim(sta); | |
| } | |
| EXPORT_SYMBOL(ieee80211_sta_set_buffered); | |
| int sta_info_move_state(struct sta_info *sta, | |
| enum ieee80211_sta_state new_state) | |
| { | |
| might_sleep(); | |
| if (sta->sta_state == new_state) | |
| return 0; | |
| /* check allowed transitions first */ | |
| switch (new_state) { | |
| case IEEE80211_STA_NONE: | |
| if (sta->sta_state != IEEE80211_STA_AUTH) | |
| return -EINVAL; | |
| break; | |
| case IEEE80211_STA_AUTH: | |
| if (sta->sta_state != IEEE80211_STA_NONE && | |
| sta->sta_state != IEEE80211_STA_ASSOC) | |
| return -EINVAL; | |
| break; | |
| case IEEE80211_STA_ASSOC: | |
| if (sta->sta_state != IEEE80211_STA_AUTH && | |
| sta->sta_state != IEEE80211_STA_AUTHORIZED) | |
| return -EINVAL; | |
| break; | |
| case IEEE80211_STA_AUTHORIZED: | |
| if (sta->sta_state != IEEE80211_STA_ASSOC) | |
| return -EINVAL; | |
| break; | |
| default: | |
| WARN(1, "invalid state %d", new_state); | |
| return -EINVAL; | |
| } | |
| sta_dbg(sta->sdata, "moving STA %pM to state %d\n", | |
| sta->sta.addr, new_state); | |
| /* | |
| * notify the driver before the actual changes so it can | |
| * fail the transition | |
| */ | |
| if (test_sta_flag(sta, WLAN_STA_INSERTED)) { | |
| int err = drv_sta_state(sta->local, sta->sdata, sta, | |
| sta->sta_state, new_state); | |
| if (err) | |
| return err; | |
| } | |
| /* reflect the change in all state variables */ | |
| switch (new_state) { | |
| case IEEE80211_STA_NONE: | |
| if (sta->sta_state == IEEE80211_STA_AUTH) | |
| clear_bit(WLAN_STA_AUTH, &sta->_flags); | |
| break; | |
| case IEEE80211_STA_AUTH: | |
| if (sta->sta_state == IEEE80211_STA_NONE) | |
| set_bit(WLAN_STA_AUTH, &sta->_flags); | |
| else if (sta->sta_state == IEEE80211_STA_ASSOC) | |
| clear_bit(WLAN_STA_ASSOC, &sta->_flags); | |
| break; | |
| case IEEE80211_STA_ASSOC: | |
| if (sta->sta_state == IEEE80211_STA_AUTH) { | |
| set_bit(WLAN_STA_ASSOC, &sta->_flags); | |
| } else if (sta->sta_state == IEEE80211_STA_AUTHORIZED) { | |
| if (sta->sdata->vif.type == NL80211_IFTYPE_AP || | |
| (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | |
| !sta->sdata->u.vlan.sta)) | |
| atomic_dec(&sta->sdata->bss->num_mcast_sta); | |
| clear_bit(WLAN_STA_AUTHORIZED, &sta->_flags); | |
| } | |
| break; | |
| case IEEE80211_STA_AUTHORIZED: | |
| if (sta->sta_state == IEEE80211_STA_ASSOC) { | |
| if (sta->sdata->vif.type == NL80211_IFTYPE_AP || | |
| (sta->sdata->vif.type == NL80211_IFTYPE_AP_VLAN && | |
| !sta->sdata->u.vlan.sta)) | |
| atomic_inc(&sta->sdata->bss->num_mcast_sta); | |
| set_bit(WLAN_STA_AUTHORIZED, &sta->_flags); | |
| } | |
| break; | |
| default: | |
| break; | |
| } | |
| sta->sta_state = new_state; | |
| return 0; | |
| } |