| /* |
| * dtsi file for Cavium ThunderX2 CN99XX processor |
| * |
| * Copyright (c) 2017 Cavium Inc. |
| * Copyright (c) 2013-2016 Broadcom |
| * Author: Zi Shen Lim <zlim@broadcom.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| */ |
| |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| |
| / { |
| model = "Cavium ThunderX2 CN99XX"; |
| compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc"; |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| /* just 4 cpus now, 128 needed in full config */ |
| cpus { |
| #address-cells = <0x2>; |
| #size-cells = <0x0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| }; |
| |
| cpu@1 { |
| device_type = "cpu"; |
| compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| }; |
| |
| cpu@2 { |
| device_type = "cpu"; |
| compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; |
| reg = <0x0 0x2>; |
| enable-method = "psci"; |
| }; |
| |
| cpu@3 { |
| device_type = "cpu"; |
| compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; |
| reg = <0x0 0x3>; |
| enable-method = "psci"; |
| }; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| gic: interrupt-controller@400080000 { |
| compatible = "arm,gic-v3"; |
| #interrupt-cells = <3>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| interrupt-controller; |
| #redistributor-regions = <1>; |
| reg = <0x04 0x00080000 0x0 0x20000>, /* GICD */ |
| <0x04 0x01000000 0x0 0x1000000>; /* GICR */ |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; |
| |
| gicits: gic-its@40010000 { |
| compatible = "arm,gic-v3-its"; |
| msi-controller; |
| reg = <0x04 0x00100000 0x0 0x20000>; /* GIC ITS */ |
| }; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>, |
| <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>; |
| }; |
| |
| pmu { |
| compatible = "brcm,vulcan-pmu", "arm,armv8-pmuv3"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; /* PMU overflow */ |
| }; |
| |
| clk125mhz: uart_clk125mhz { |
| compatible = "fixed-clock"; |
| #clock-cells = <0>; |
| clock-frequency = <125000000>; |
| clock-output-names = "clk125mhz"; |
| }; |
| |
| pci { |
| compatible = "pci-host-ecam-generic"; |
| device_type = "pci"; |
| #interrupt-cells = <1>; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| |
| /* ECAM at 0x3000_0000 - 0x4000_0000 */ |
| reg = <0x0 0x30000000 0x0 0x10000000>; |
| reg-names = "PCI ECAM"; |
| |
| /* |
| * PCI ranges: |
| * IO no supported |
| * MEM 0x4000_0000 - 0x6000_0000 |
| * MEM64 pref 0x40_0000_0000 - 0x60_0000_0000 |
| */ |
| ranges = |
| <0x02000000 0 0x40000000 0 0x40000000 0 0x20000000 |
| 0x43000000 0x40 0x00000000 0x40 0x00000000 0x20 0x00000000>; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = |
| /* addr pin ic icaddr icintr */ |
| <0 0 0 1 &gic 0 0 GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH |
| 0 0 0 2 &gic 0 0 GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH |
| 0 0 0 3 &gic 0 0 GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH |
| 0 0 0 4 &gic 0 0 GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; |
| msi-parent = <&gicits>; |
| dma-coherent; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| uart0: serial@402020000 { |
| compatible = "arm,pl011", "arm,primecell"; |
| reg = <0x04 0x02020000 0x0 0x1000>; |
| interrupt-parent = <&gic>; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; |
| clocks = <&clk125mhz>; |
| clock-names = "apb_pclk"; |
| }; |
| }; |
| |
| }; |