|  | /* | 
|  | *  linux/drivers/mmc/core/mmc.c | 
|  | * | 
|  | *  Copyright (C) 2003-2004 Russell King, All Rights Reserved. | 
|  | *  Copyright (C) 2005-2007 Pierre Ossman, All Rights Reserved. | 
|  | *  MMCv4 support Copyright (C) 2006 Philip Langdale, All Rights Reserved. | 
|  | * | 
|  | * This program is free software; you can redistribute it and/or modify | 
|  | * it under the terms of the GNU General Public License version 2 as | 
|  | * published by the Free Software Foundation. | 
|  | */ | 
|  |  | 
|  | #include <linux/err.h> | 
|  |  | 
|  | #include <linux/mmc/host.h> | 
|  | #include <linux/mmc/card.h> | 
|  | #include <linux/mmc/mmc.h> | 
|  |  | 
|  | #include "core.h" | 
|  | #include "bus.h" | 
|  | #include "mmc_ops.h" | 
|  |  | 
|  | static const unsigned int tran_exp[] = { | 
|  | 10000,		100000,		1000000,	10000000, | 
|  | 0,		0,		0,		0 | 
|  | }; | 
|  |  | 
|  | static const unsigned char tran_mant[] = { | 
|  | 0,	10,	12,	13,	15,	20,	25,	30, | 
|  | 35,	40,	45,	50,	55,	60,	70,	80, | 
|  | }; | 
|  |  | 
|  | static const unsigned int tacc_exp[] = { | 
|  | 1,	10,	100,	1000,	10000,	100000,	1000000, 10000000, | 
|  | }; | 
|  |  | 
|  | static const unsigned int tacc_mant[] = { | 
|  | 0,	10,	12,	13,	15,	20,	25,	30, | 
|  | 35,	40,	45,	50,	55,	60,	70,	80, | 
|  | }; | 
|  |  | 
|  | #define UNSTUFF_BITS(resp,start,size)					\ | 
|  | ({								\ | 
|  | const int __size = size;				\ | 
|  | const u32 __mask = (__size < 32 ? 1 << __size : 0) - 1;	\ | 
|  | const int __off = 3 - ((start) / 32);			\ | 
|  | const int __shft = (start) & 31;			\ | 
|  | u32 __res;						\ | 
|  | \ | 
|  | __res = resp[__off] >> __shft;				\ | 
|  | if (__size + __shft > 32)				\ | 
|  | __res |= resp[__off-1] << ((32 - __shft) % 32);	\ | 
|  | __res & __mask;						\ | 
|  | }) | 
|  |  | 
|  | /* | 
|  | * Given the decoded CSD structure, decode the raw CID to our CID structure. | 
|  | */ | 
|  | static int mmc_decode_cid(struct mmc_card *card) | 
|  | { | 
|  | u32 *resp = card->raw_cid; | 
|  |  | 
|  | /* | 
|  | * The selection of the format here is based upon published | 
|  | * specs from sandisk and from what people have reported. | 
|  | */ | 
|  | switch (card->csd.mmca_vsn) { | 
|  | case 0: /* MMC v1.0 - v1.2 */ | 
|  | case 1: /* MMC v1.4 */ | 
|  | card->cid.manfid	= UNSTUFF_BITS(resp, 104, 24); | 
|  | card->cid.prod_name[0]	= UNSTUFF_BITS(resp, 96, 8); | 
|  | card->cid.prod_name[1]	= UNSTUFF_BITS(resp, 88, 8); | 
|  | card->cid.prod_name[2]	= UNSTUFF_BITS(resp, 80, 8); | 
|  | card->cid.prod_name[3]	= UNSTUFF_BITS(resp, 72, 8); | 
|  | card->cid.prod_name[4]	= UNSTUFF_BITS(resp, 64, 8); | 
|  | card->cid.prod_name[5]	= UNSTUFF_BITS(resp, 56, 8); | 
|  | card->cid.prod_name[6]	= UNSTUFF_BITS(resp, 48, 8); | 
|  | card->cid.hwrev		= UNSTUFF_BITS(resp, 44, 4); | 
|  | card->cid.fwrev		= UNSTUFF_BITS(resp, 40, 4); | 
|  | card->cid.serial	= UNSTUFF_BITS(resp, 16, 24); | 
|  | card->cid.month		= UNSTUFF_BITS(resp, 12, 4); | 
|  | card->cid.year		= UNSTUFF_BITS(resp, 8, 4) + 1997; | 
|  | break; | 
|  |  | 
|  | case 2: /* MMC v2.0 - v2.2 */ | 
|  | case 3: /* MMC v3.1 - v3.3 */ | 
|  | case 4: /* MMC v4 */ | 
|  | card->cid.manfid	= UNSTUFF_BITS(resp, 120, 8); | 
|  | card->cid.oemid		= UNSTUFF_BITS(resp, 104, 16); | 
|  | card->cid.prod_name[0]	= UNSTUFF_BITS(resp, 96, 8); | 
|  | card->cid.prod_name[1]	= UNSTUFF_BITS(resp, 88, 8); | 
|  | card->cid.prod_name[2]	= UNSTUFF_BITS(resp, 80, 8); | 
|  | card->cid.prod_name[3]	= UNSTUFF_BITS(resp, 72, 8); | 
|  | card->cid.prod_name[4]	= UNSTUFF_BITS(resp, 64, 8); | 
|  | card->cid.prod_name[5]	= UNSTUFF_BITS(resp, 56, 8); | 
|  | card->cid.serial	= UNSTUFF_BITS(resp, 16, 32); | 
|  | card->cid.month		= UNSTUFF_BITS(resp, 12, 4); | 
|  | card->cid.year		= UNSTUFF_BITS(resp, 8, 4) + 1997; | 
|  | break; | 
|  |  | 
|  | default: | 
|  | printk(KERN_ERR "%s: card has unknown MMCA version %d\n", | 
|  | mmc_hostname(card->host), card->csd.mmca_vsn); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Given a 128-bit response, decode to our card CSD structure. | 
|  | */ | 
|  | static int mmc_decode_csd(struct mmc_card *card) | 
|  | { | 
|  | struct mmc_csd *csd = &card->csd; | 
|  | unsigned int e, m, csd_struct; | 
|  | u32 *resp = card->raw_csd; | 
|  |  | 
|  | /* | 
|  | * We only understand CSD structure v1.1 and v1.2. | 
|  | * v1.2 has extra information in bits 15, 11 and 10. | 
|  | */ | 
|  | csd_struct = UNSTUFF_BITS(resp, 126, 2); | 
|  | if (csd_struct != 1 && csd_struct != 2) { | 
|  | printk(KERN_ERR "%s: unrecognised CSD structure version %d\n", | 
|  | mmc_hostname(card->host), csd_struct); | 
|  | return -EINVAL; | 
|  | } | 
|  |  | 
|  | csd->mmca_vsn	 = UNSTUFF_BITS(resp, 122, 4); | 
|  | m = UNSTUFF_BITS(resp, 115, 4); | 
|  | e = UNSTUFF_BITS(resp, 112, 3); | 
|  | csd->tacc_ns	 = (tacc_exp[e] * tacc_mant[m] + 9) / 10; | 
|  | csd->tacc_clks	 = UNSTUFF_BITS(resp, 104, 8) * 100; | 
|  |  | 
|  | m = UNSTUFF_BITS(resp, 99, 4); | 
|  | e = UNSTUFF_BITS(resp, 96, 3); | 
|  | csd->max_dtr	  = tran_exp[e] * tran_mant[m]; | 
|  | csd->cmdclass	  = UNSTUFF_BITS(resp, 84, 12); | 
|  |  | 
|  | e = UNSTUFF_BITS(resp, 47, 3); | 
|  | m = UNSTUFF_BITS(resp, 62, 12); | 
|  | csd->capacity	  = (1 + m) << (e + 2); | 
|  |  | 
|  | csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4); | 
|  | csd->read_partial = UNSTUFF_BITS(resp, 79, 1); | 
|  | csd->write_misalign = UNSTUFF_BITS(resp, 78, 1); | 
|  | csd->read_misalign = UNSTUFF_BITS(resp, 77, 1); | 
|  | csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3); | 
|  | csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4); | 
|  | csd->write_partial = UNSTUFF_BITS(resp, 21, 1); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Read and decode extended CSD. | 
|  | */ | 
|  | static int mmc_read_ext_csd(struct mmc_card *card) | 
|  | { | 
|  | int err; | 
|  | u8 *ext_csd; | 
|  |  | 
|  | BUG_ON(!card); | 
|  |  | 
|  | if (card->csd.mmca_vsn < CSD_SPEC_VER_4) | 
|  | return 0; | 
|  |  | 
|  | /* | 
|  | * As the ext_csd is so large and mostly unused, we don't store the | 
|  | * raw block in mmc_card. | 
|  | */ | 
|  | ext_csd = kmalloc(512, GFP_KERNEL); | 
|  | if (!ext_csd) { | 
|  | printk(KERN_ERR "%s: could not allocate a buffer to " | 
|  | "receive the ext_csd.\n", mmc_hostname(card->host)); | 
|  | return -ENOMEM; | 
|  | } | 
|  |  | 
|  | err = mmc_send_ext_csd(card, ext_csd); | 
|  | if (err) { | 
|  | /* If the host or the card can't do the switch, | 
|  | * fail more gracefully. */ | 
|  | if ((err != -EINVAL) | 
|  | && (err != -ENOSYS) | 
|  | && (err != -EFAULT)) | 
|  | goto out; | 
|  |  | 
|  | /* | 
|  | * High capacity cards should have this "magic" size | 
|  | * stored in their CSD. | 
|  | */ | 
|  | if (card->csd.capacity == (4096 * 512)) { | 
|  | printk(KERN_ERR "%s: unable to read EXT_CSD " | 
|  | "on a possible high capacity card. " | 
|  | "Card will be ignored.\n", | 
|  | mmc_hostname(card->host)); | 
|  | } else { | 
|  | printk(KERN_WARNING "%s: unable to read " | 
|  | "EXT_CSD, performance might " | 
|  | "suffer.\n", | 
|  | mmc_hostname(card->host)); | 
|  | err = 0; | 
|  | } | 
|  |  | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | card->ext_csd.rev = ext_csd[EXT_CSD_REV]; | 
|  | if (card->ext_csd.rev > 5) { | 
|  | printk(KERN_ERR "%s: unrecognised EXT_CSD structure " | 
|  | "version %d\n", mmc_hostname(card->host), | 
|  | card->ext_csd.rev); | 
|  | err = -EINVAL; | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (card->ext_csd.rev >= 2) { | 
|  | card->ext_csd.sectors = | 
|  | ext_csd[EXT_CSD_SEC_CNT + 0] << 0 | | 
|  | ext_csd[EXT_CSD_SEC_CNT + 1] << 8 | | 
|  | ext_csd[EXT_CSD_SEC_CNT + 2] << 16 | | 
|  | ext_csd[EXT_CSD_SEC_CNT + 3] << 24; | 
|  | if (card->ext_csd.sectors) | 
|  | mmc_card_set_blockaddr(card); | 
|  | } | 
|  |  | 
|  | switch (ext_csd[EXT_CSD_CARD_TYPE]) { | 
|  | case EXT_CSD_CARD_TYPE_52 | EXT_CSD_CARD_TYPE_26: | 
|  | card->ext_csd.hs_max_dtr = 52000000; | 
|  | break; | 
|  | case EXT_CSD_CARD_TYPE_26: | 
|  | card->ext_csd.hs_max_dtr = 26000000; | 
|  | break; | 
|  | default: | 
|  | /* MMC v4 spec says this cannot happen */ | 
|  | printk(KERN_WARNING "%s: card is mmc v4 but doesn't " | 
|  | "support any high-speed modes.\n", | 
|  | mmc_hostname(card->host)); | 
|  | goto out; | 
|  | } | 
|  |  | 
|  | if (card->ext_csd.rev >= 3) { | 
|  | u8 sa_shift = ext_csd[EXT_CSD_S_A_TIMEOUT]; | 
|  |  | 
|  | /* Sleep / awake timeout in 100ns units */ | 
|  | if (sa_shift > 0 && sa_shift <= 0x17) | 
|  | card->ext_csd.sa_timeout = | 
|  | 1 << ext_csd[EXT_CSD_S_A_TIMEOUT]; | 
|  | } | 
|  |  | 
|  | out: | 
|  | kfree(ext_csd); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | MMC_DEV_ATTR(cid, "%08x%08x%08x%08x\n", card->raw_cid[0], card->raw_cid[1], | 
|  | card->raw_cid[2], card->raw_cid[3]); | 
|  | MMC_DEV_ATTR(csd, "%08x%08x%08x%08x\n", card->raw_csd[0], card->raw_csd[1], | 
|  | card->raw_csd[2], card->raw_csd[3]); | 
|  | MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year); | 
|  | MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev); | 
|  | MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev); | 
|  | MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid); | 
|  | MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name); | 
|  | MMC_DEV_ATTR(oemid, "0x%04x\n", card->cid.oemid); | 
|  | MMC_DEV_ATTR(serial, "0x%08x\n", card->cid.serial); | 
|  |  | 
|  | static struct attribute *mmc_std_attrs[] = { | 
|  | &dev_attr_cid.attr, | 
|  | &dev_attr_csd.attr, | 
|  | &dev_attr_date.attr, | 
|  | &dev_attr_fwrev.attr, | 
|  | &dev_attr_hwrev.attr, | 
|  | &dev_attr_manfid.attr, | 
|  | &dev_attr_name.attr, | 
|  | &dev_attr_oemid.attr, | 
|  | &dev_attr_serial.attr, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static struct attribute_group mmc_std_attr_group = { | 
|  | .attrs = mmc_std_attrs, | 
|  | }; | 
|  |  | 
|  | static const struct attribute_group *mmc_attr_groups[] = { | 
|  | &mmc_std_attr_group, | 
|  | NULL, | 
|  | }; | 
|  |  | 
|  | static struct device_type mmc_type = { | 
|  | .groups = mmc_attr_groups, | 
|  | }; | 
|  |  | 
|  | /* | 
|  | * Handle the detection and initialisation of a card. | 
|  | * | 
|  | * In the case of a resume, "oldcard" will contain the card | 
|  | * we're trying to reinitialise. | 
|  | */ | 
|  | static int mmc_init_card(struct mmc_host *host, u32 ocr, | 
|  | struct mmc_card *oldcard) | 
|  | { | 
|  | struct mmc_card *card; | 
|  | int err; | 
|  | u32 cid[4]; | 
|  | unsigned int max_dtr; | 
|  |  | 
|  | BUG_ON(!host); | 
|  | WARN_ON(!host->claimed); | 
|  |  | 
|  | /* | 
|  | * Since we're changing the OCR value, we seem to | 
|  | * need to tell some cards to go back to the idle | 
|  | * state.  We wait 1ms to give cards time to | 
|  | * respond. | 
|  | */ | 
|  | mmc_go_idle(host); | 
|  |  | 
|  | /* The extra bit indicates that we support high capacity */ | 
|  | err = mmc_send_op_cond(host, ocr | (1 << 30), NULL); | 
|  | if (err) | 
|  | goto err; | 
|  |  | 
|  | /* | 
|  | * For SPI, enable CRC as appropriate. | 
|  | */ | 
|  | if (mmc_host_is_spi(host)) { | 
|  | err = mmc_spi_set_crc(host, use_spi_crc); | 
|  | if (err) | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Fetch CID from card. | 
|  | */ | 
|  | if (mmc_host_is_spi(host)) | 
|  | err = mmc_send_cid(host, cid); | 
|  | else | 
|  | err = mmc_all_send_cid(host, cid); | 
|  | if (err) | 
|  | goto err; | 
|  |  | 
|  | if (oldcard) { | 
|  | if (memcmp(cid, oldcard->raw_cid, sizeof(cid)) != 0) { | 
|  | err = -ENOENT; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | card = oldcard; | 
|  | } else { | 
|  | /* | 
|  | * Allocate card structure. | 
|  | */ | 
|  | card = mmc_alloc_card(host, &mmc_type); | 
|  | if (IS_ERR(card)) { | 
|  | err = PTR_ERR(card); | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | card->type = MMC_TYPE_MMC; | 
|  | card->rca = 1; | 
|  | memcpy(card->raw_cid, cid, sizeof(card->raw_cid)); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * For native busses:  set card RCA and quit open drain mode. | 
|  | */ | 
|  | if (!mmc_host_is_spi(host)) { | 
|  | err = mmc_set_relative_addr(card); | 
|  | if (err) | 
|  | goto free_card; | 
|  |  | 
|  | mmc_set_bus_mode(host, MMC_BUSMODE_PUSHPULL); | 
|  | } | 
|  |  | 
|  | if (!oldcard) { | 
|  | /* | 
|  | * Fetch CSD from card. | 
|  | */ | 
|  | err = mmc_send_csd(card, card->raw_csd); | 
|  | if (err) | 
|  | goto free_card; | 
|  |  | 
|  | err = mmc_decode_csd(card); | 
|  | if (err) | 
|  | goto free_card; | 
|  | err = mmc_decode_cid(card); | 
|  | if (err) | 
|  | goto free_card; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Select card, as all following commands rely on that. | 
|  | */ | 
|  | if (!mmc_host_is_spi(host)) { | 
|  | err = mmc_select_card(card); | 
|  | if (err) | 
|  | goto free_card; | 
|  | } | 
|  |  | 
|  | if (!oldcard) { | 
|  | /* | 
|  | * Fetch and process extended CSD. | 
|  | */ | 
|  | err = mmc_read_ext_csd(card); | 
|  | if (err) | 
|  | goto free_card; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Activate high speed (if supported) | 
|  | */ | 
|  | if ((card->ext_csd.hs_max_dtr != 0) && | 
|  | (host->caps & MMC_CAP_MMC_HIGHSPEED)) { | 
|  | err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, | 
|  | EXT_CSD_HS_TIMING, 1); | 
|  | if (err && err != -EBADMSG) | 
|  | goto free_card; | 
|  |  | 
|  | if (err) { | 
|  | printk(KERN_WARNING "%s: switch to highspeed failed\n", | 
|  | mmc_hostname(card->host)); | 
|  | err = 0; | 
|  | } else { | 
|  | mmc_card_set_highspeed(card); | 
|  | mmc_set_timing(card->host, MMC_TIMING_MMC_HS); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Compute bus speed. | 
|  | */ | 
|  | max_dtr = (unsigned int)-1; | 
|  |  | 
|  | if (mmc_card_highspeed(card)) { | 
|  | if (max_dtr > card->ext_csd.hs_max_dtr) | 
|  | max_dtr = card->ext_csd.hs_max_dtr; | 
|  | } else if (max_dtr > card->csd.max_dtr) { | 
|  | max_dtr = card->csd.max_dtr; | 
|  | } | 
|  |  | 
|  | mmc_set_clock(host, max_dtr); | 
|  |  | 
|  | /* | 
|  | * Activate wide bus (if supported). | 
|  | */ | 
|  | if ((card->csd.mmca_vsn >= CSD_SPEC_VER_4) && | 
|  | (host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA))) { | 
|  | unsigned ext_csd_bit, bus_width; | 
|  |  | 
|  | if (host->caps & MMC_CAP_8_BIT_DATA) { | 
|  | ext_csd_bit = EXT_CSD_BUS_WIDTH_8; | 
|  | bus_width = MMC_BUS_WIDTH_8; | 
|  | } else { | 
|  | ext_csd_bit = EXT_CSD_BUS_WIDTH_4; | 
|  | bus_width = MMC_BUS_WIDTH_4; | 
|  | } | 
|  |  | 
|  | err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, | 
|  | EXT_CSD_BUS_WIDTH, ext_csd_bit); | 
|  |  | 
|  | if (err && err != -EBADMSG) | 
|  | goto free_card; | 
|  |  | 
|  | if (err) { | 
|  | printk(KERN_WARNING "%s: switch to bus width %d " | 
|  | "failed\n", mmc_hostname(card->host), | 
|  | 1 << bus_width); | 
|  | err = 0; | 
|  | } else { | 
|  | mmc_set_bus_width(card->host, bus_width); | 
|  | } | 
|  | } | 
|  |  | 
|  | if (!oldcard) | 
|  | host->card = card; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | free_card: | 
|  | if (!oldcard) | 
|  | mmc_remove_card(card); | 
|  | err: | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Host is being removed. Free up the current card. | 
|  | */ | 
|  | static void mmc_remove(struct mmc_host *host) | 
|  | { | 
|  | BUG_ON(!host); | 
|  | BUG_ON(!host->card); | 
|  |  | 
|  | mmc_remove_card(host->card); | 
|  | host->card = NULL; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Card detection callback from host. | 
|  | */ | 
|  | static void mmc_detect(struct mmc_host *host) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | BUG_ON(!host); | 
|  | BUG_ON(!host->card); | 
|  |  | 
|  | mmc_claim_host(host); | 
|  |  | 
|  | /* | 
|  | * Just check if our card has been removed. | 
|  | */ | 
|  | err = mmc_send_status(host->card, NULL); | 
|  |  | 
|  | mmc_release_host(host); | 
|  |  | 
|  | if (err) { | 
|  | mmc_remove(host); | 
|  |  | 
|  | mmc_claim_host(host); | 
|  | mmc_detach_bus(host); | 
|  | mmc_release_host(host); | 
|  | } | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Suspend callback from host. | 
|  | */ | 
|  | static int mmc_suspend(struct mmc_host *host) | 
|  | { | 
|  | BUG_ON(!host); | 
|  | BUG_ON(!host->card); | 
|  |  | 
|  | mmc_claim_host(host); | 
|  | if (!mmc_host_is_spi(host)) | 
|  | mmc_deselect_cards(host); | 
|  | host->card->state &= ~MMC_STATE_HIGHSPEED; | 
|  | mmc_release_host(host); | 
|  |  | 
|  | return 0; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Resume callback from host. | 
|  | * | 
|  | * This function tries to determine if the same card is still present | 
|  | * and, if so, restore all state to it. | 
|  | */ | 
|  | static int mmc_resume(struct mmc_host *host) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | BUG_ON(!host); | 
|  | BUG_ON(!host->card); | 
|  |  | 
|  | mmc_claim_host(host); | 
|  | err = mmc_init_card(host, host->ocr, host->card); | 
|  | mmc_release_host(host); | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static void mmc_power_restore(struct mmc_host *host) | 
|  | { | 
|  | host->card->state &= ~MMC_STATE_HIGHSPEED; | 
|  | mmc_claim_host(host); | 
|  | mmc_init_card(host, host->ocr, host->card); | 
|  | mmc_release_host(host); | 
|  | } | 
|  |  | 
|  | static int mmc_sleep(struct mmc_host *host) | 
|  | { | 
|  | struct mmc_card *card = host->card; | 
|  | int err = -ENOSYS; | 
|  |  | 
|  | if (card && card->ext_csd.rev >= 3) { | 
|  | err = mmc_card_sleepawake(host, 1); | 
|  | if (err < 0) | 
|  | pr_debug("%s: Error %d while putting card into sleep", | 
|  | mmc_hostname(host), err); | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static int mmc_awake(struct mmc_host *host) | 
|  | { | 
|  | struct mmc_card *card = host->card; | 
|  | int err = -ENOSYS; | 
|  |  | 
|  | if (card && card->ext_csd.rev >= 3) { | 
|  | err = mmc_card_sleepawake(host, 0); | 
|  | if (err < 0) | 
|  | pr_debug("%s: Error %d while awaking sleeping card", | 
|  | mmc_hostname(host), err); | 
|  | } | 
|  |  | 
|  | return err; | 
|  | } | 
|  |  | 
|  | static const struct mmc_bus_ops mmc_ops = { | 
|  | .awake = mmc_awake, | 
|  | .sleep = mmc_sleep, | 
|  | .remove = mmc_remove, | 
|  | .detect = mmc_detect, | 
|  | .suspend = NULL, | 
|  | .resume = NULL, | 
|  | .power_restore = mmc_power_restore, | 
|  | }; | 
|  |  | 
|  | static const struct mmc_bus_ops mmc_ops_unsafe = { | 
|  | .awake = mmc_awake, | 
|  | .sleep = mmc_sleep, | 
|  | .remove = mmc_remove, | 
|  | .detect = mmc_detect, | 
|  | .suspend = mmc_suspend, | 
|  | .resume = mmc_resume, | 
|  | .power_restore = mmc_power_restore, | 
|  | }; | 
|  |  | 
|  | static void mmc_attach_bus_ops(struct mmc_host *host) | 
|  | { | 
|  | const struct mmc_bus_ops *bus_ops; | 
|  |  | 
|  | if (host->caps & MMC_CAP_NONREMOVABLE || !mmc_assume_removable) | 
|  | bus_ops = &mmc_ops_unsafe; | 
|  | else | 
|  | bus_ops = &mmc_ops; | 
|  | mmc_attach_bus(host, bus_ops); | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Starting point for MMC card init. | 
|  | */ | 
|  | int mmc_attach_mmc(struct mmc_host *host, u32 ocr) | 
|  | { | 
|  | int err; | 
|  |  | 
|  | BUG_ON(!host); | 
|  | WARN_ON(!host->claimed); | 
|  |  | 
|  | mmc_attach_bus_ops(host); | 
|  |  | 
|  | /* | 
|  | * We need to get OCR a different way for SPI. | 
|  | */ | 
|  | if (mmc_host_is_spi(host)) { | 
|  | err = mmc_spi_read_ocr(host, 1, &ocr); | 
|  | if (err) | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Sanity check the voltages that the card claims to | 
|  | * support. | 
|  | */ | 
|  | if (ocr & 0x7F) { | 
|  | printk(KERN_WARNING "%s: card claims to support voltages " | 
|  | "below the defined range. These will be ignored.\n", | 
|  | mmc_hostname(host)); | 
|  | ocr &= ~0x7F; | 
|  | } | 
|  |  | 
|  | host->ocr = mmc_select_voltage(host, ocr); | 
|  |  | 
|  | /* | 
|  | * Can we support the voltage of the card? | 
|  | */ | 
|  | if (!host->ocr) { | 
|  | err = -EINVAL; | 
|  | goto err; | 
|  | } | 
|  |  | 
|  | /* | 
|  | * Detect and init the card. | 
|  | */ | 
|  | err = mmc_init_card(host, host->ocr, NULL); | 
|  | if (err) | 
|  | goto err; | 
|  |  | 
|  | mmc_release_host(host); | 
|  |  | 
|  | err = mmc_add_card(host->card); | 
|  | if (err) | 
|  | goto remove_card; | 
|  |  | 
|  | return 0; | 
|  |  | 
|  | remove_card: | 
|  | mmc_remove_card(host->card); | 
|  | host->card = NULL; | 
|  | mmc_claim_host(host); | 
|  | err: | 
|  | mmc_detach_bus(host); | 
|  | mmc_release_host(host); | 
|  |  | 
|  | printk(KERN_ERR "%s: error %d whilst initialising MMC card\n", | 
|  | mmc_hostname(host), err); | 
|  |  | 
|  | return err; | 
|  | } |