| Ingenic SoC Interrupt Controller |
| |
| Required properties: |
| |
| - compatible : should be "ingenic,<socname>-intc". Valid strings are: |
| ingenic,jz4740-intc |
| ingenic,jz4770-intc |
| ingenic,jz4775-intc |
| ingenic,jz4780-intc |
| - reg : Specifies base physical address and size of the registers. |
| - interrupt-controller : Identifies the node as an interrupt controller |
| - #interrupt-cells : Specifies the number of cells needed to encode an |
| interrupt source. The value shall be 1. |
| - interrupt-parent : phandle of the CPU interrupt controller. |
| - interrupts : Specifies the CPU interrupt the controller is connected to. |
| |
| Example: |
| |
| intc: interrupt-controller@10001000 { |
| compatible = "ingenic,jz4740-intc"; |
| reg = <0x10001000 0x14>; |
| |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| interrupt-parent = <&cpuintc>; |
| interrupts = <2>; |
| }; |
