blob: 4731f6b27e47e3379f8c73444bededa889260830 [file] [log] [blame]
# SPDX-License-Identifier: GPL-2.0
config BF51x
def_bool y
depends on (BF512 || BF514 || BF516 || BF518)
if (BF51x)
source "arch/blackfin/mach-bf518/boards/Kconfig"
menu "BF518 Specific Configuration"
comment "Alternative Multiplexing Scheme"
choice
prompt "PWM Channel Pins"
default BF518_PWM_ALL_PORTF
help
Select pins used for the PWM channels:
PWM_AH PWM_AL PWM_BH PWM_BL PWM_CH PWM_CL
See the Hardware Reference Manual for more details.
config BF518_PWM_ALL_PORTF
bool "PF1 - PF6"
help
PF{1,2,3,4,5,6} <-> PWM_{AH,AL,BH,BL,CH,CL}
config BF518_PWM_PORTF_PORTG
bool "PF11 - PF14 / PG1 - PG2"
help
PF{11,12,13,14} <-> PWM_{AH,AL,BH,BL}
PG{1,2} <-> PWM_{CH,CL}
endchoice
choice
prompt "PWM Sync Pin"
default BF518_PWM_SYNC_PF7
help
Select the pin used for PWM_SYNC.
See the Hardware Reference Manual for more details.
config BF518_PWM_SYNC_PF7
bool "PF7"
config BF518_PWM_SYNC_PF15
bool "PF15"
endchoice
choice
prompt "PWM Trip B Pin"
default BF518_PWM_TRIPB_PG10
help
Select the pin used for PWM_TRIPB.
See the Hardware Reference Manual for more details.
config BF518_PWM_TRIPB_PG10
bool "PG10"
config BF518_PWM_TRIPB_PG14
bool "PG14"
endchoice
choice
prompt "PPI / Timer Pins"
default BF518_PPI_TMR_PG5
help
Select pins used for PPI/Timer:
PPICLK PPIFS1 PPIFS2
TMRCLK TMR0 TMR1
See the Hardware Reference Manual for more details.
config BF518_PPI_TMR_PG5
bool "PG5 - PG7"
help
PG{5,6,7} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2}
config BF518_PPI_TMR_PG12
bool "PG12 - PG14"
help
PG{12,13,14} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2}
endchoice
comment "Hysteresis/Schmitt Trigger Control"
config BFIN_HYSTERESIS_CONTROL
bool "Enable Hysteresis Control"
help
The ADSP-BF51x allows to control input hysteresis for Port F,
Port G and Port H and other processor signal inputs.
The Schmitt trigger enables can be set only for pin groups.
Saying Y will overwrite the default reset or boot loader
initialization.
menu "PORT F"
depends on BFIN_HYSTERESIS_CONTROL
config GPIO_HYST_PORTF_0_7
bool "Enable Hysteresis on PORTF {0...7}"
config GPIO_HYST_PORTF_8_9
bool "Enable Hysteresis on PORTF {8, 9}"
config GPIO_HYST_PORTF_10
bool "Enable Hysteresis on PORTF 10"
config GPIO_HYST_PORTF_11
bool "Enable Hysteresis on PORTF 11"
config GPIO_HYST_PORTF_12_13
bool "Enable Hysteresis on PORTF {12, 13}"
config GPIO_HYST_PORTF_14_15
bool "Enable Hysteresis on PORTF {14, 15}"
endmenu
menu "PORT G"
depends on BFIN_HYSTERESIS_CONTROL
config GPIO_HYST_PORTG_0
bool "Enable Hysteresis on PORTG 0"
config GPIO_HYST_PORTG_1_4
bool "Enable Hysteresis on PORTG {1...4}"
config GPIO_HYST_PORTG_5_6
bool "Enable Hysteresis on PORTG {5, 6}"
config GPIO_HYST_PORTG_7_8
bool "Enable Hysteresis on PORTG {7, 8}"
config GPIO_HYST_PORTG_9
bool "Enable Hysteresis on PORTG 9"
config GPIO_HYST_PORTG_10
bool "Enable Hysteresis on PORTG 10"
config GPIO_HYST_PORTG_11_13
bool "Enable Hysteresis on PORTG {11...13}"
config GPIO_HYST_PORTG_14_15
bool "Enable Hysteresis on PORTG {14, 15}"
endmenu
menu "PORT H"
depends on BFIN_HYSTERESIS_CONTROL
config GPIO_HYST_PORTH_0_7
bool "Enable Hysteresis on PORTH {0...7}"
endmenu
menu "None-GPIO"
depends on BFIN_HYSTERESIS_CONTROL
config NONEGPIO_HYST_NMI_RST_BMODE
bool "Enable Hysteresis on {NMI, RESET, BMODE}"
config NONEGPIO_HYST_JTAG
bool "Enable Hysteresis on JTAG"
endmenu
comment "Interrupt Priority Assignment"
menu "Priority"
config IRQ_PLL_WAKEUP
int "IRQ_PLL_WAKEUP"
default 7
config IRQ_DMA0_ERROR
int "IRQ_DMA0_ERROR"
default 7
config IRQ_DMAR0_BLK
int "IRQ_DMAR0_BLK"
default 7
config IRQ_DMAR1_BLK
int "IRQ_DMAR1_BLK"
default 7
config IRQ_DMAR0_OVR
int "IRQ_DMAR0_OVR"
default 7
config IRQ_DMAR1_OVR
int "IRQ_DMAR1_OVR"
default 7
config IRQ_PPI_ERROR
int "IRQ_PPI_ERROR"
default 7
config IRQ_MAC_ERROR
int "IRQ_MAC_ERROR"
default 7
config IRQ_SPORT0_ERROR
int "IRQ_SPORT0_ERROR"
default 7
config IRQ_SPORT1_ERROR
int "IRQ_SPORT1_ERROR"
default 7
config IRQ_PTP_ERROR
int "IRQ_PTP_ERROR"
default 7
config IRQ_UART0_ERROR
int "IRQ_UART0_ERROR"
default 7
config IRQ_UART1_ERROR
int "IRQ_UART1_ERROR"
default 7
config IRQ_RTC
int "IRQ_RTC"
default 8
config IRQ_PPI
int "IRQ_PPI"
default 8
config IRQ_SPORT0_RX
int "IRQ_SPORT0_RX"
default 9
config IRQ_SPORT0_TX
int "IRQ_SPORT0_TX"
default 9
config IRQ_SPORT1_RX
int "IRQ_SPORT1_RX"
default 9
config IRQ_SPORT1_TX
int "IRQ_SPORT1_TX"
default 9
config IRQ_TWI
int "IRQ_TWI"
default 10
config IRQ_SPI0
int "IRQ_SPI"
default 10
config IRQ_UART0_RX
int "IRQ_UART0_RX"
default 10
config IRQ_UART0_TX
int "IRQ_UART0_TX"
default 10
config IRQ_UART1_RX
int "IRQ_UART1_RX"
default 10
config IRQ_UART1_TX
int "IRQ_UART1_TX"
default 10
config IRQ_OPTSEC
int "IRQ_OPTSEC"
default 11
config IRQ_CNT
int "IRQ_CNT"
default 11
config IRQ_MAC_RX
int "IRQ_MAC_RX"
default 11
config IRQ_PORTH_INTA
int "IRQ_PORTH_INTA"
default 11
config IRQ_MAC_TX
int "IRQ_MAC_TX/NFC"
default 11
config IRQ_PORTH_INTB
int "IRQ_PORTH_INTB"
default 11
config IRQ_TIMER0
int "IRQ_TIMER0"
default 7 if TICKSOURCE_GPTMR0
default 8
config IRQ_TIMER1
int "IRQ_TIMER1"
default 12
config IRQ_TIMER2
int "IRQ_TIMER2"
default 12
config IRQ_TIMER3
int "IRQ_TIMER3"
default 12
config IRQ_TIMER4
int "IRQ_TIMER4"
default 12
config IRQ_TIMER5
int "IRQ_TIMER5"
default 12
config IRQ_TIMER6
int "IRQ_TIMER6"
default 12
config IRQ_TIMER7
int "IRQ_TIMER7"
default 12
config IRQ_PORTG_INTA
int "IRQ_PORTG_INTA"
default 12
config IRQ_PORTG_INTB
int "IRQ_PORTG_INTB"
default 12
config IRQ_MEM_DMA0
int "IRQ_MEM_DMA0"
default 13
config IRQ_MEM_DMA1
int "IRQ_MEM_DMA1"
default 13
config IRQ_WATCH
int "IRQ_WATCH"
default 13
config IRQ_PORTF_INTA
int "IRQ_PORTF_INTA"
default 13
config IRQ_PORTF_INTB
int "IRQ_PORTF_INTB"
default 13
config IRQ_SPI0_ERROR
int "IRQ_SPI0_ERROR"
default 7
config IRQ_SPI1_ERROR
int "IRQ_SPI1_ERROR"
default 7
config IRQ_RSI_INT0
int "IRQ_RSI_INT0"
default 7
config IRQ_RSI_INT1
int "IRQ_RSI_INT1"
default 7
config IRQ_PWM_TRIP
int "IRQ_PWM_TRIP"
default 10
config IRQ_PWM_SYNC
int "IRQ_PWM_SYNC"
default 10
config IRQ_PTP_STAT
int "IRQ_PTP_STAT"
default 10
help
Enter the priority numbers between 7-13 ONLY. Others are Reserved.
This applies to all the above. It is not recommended to assign the
highest priority number 7 to UART or any other device.
endmenu
endmenu
endif