| /* |
| * IBM Summit-Specific Code |
| * |
| * Written By: Matthew Dobson, IBM Corporation |
| * |
| * Copyright (c) 2003 IBM Corp. |
| * |
| * All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or (at |
| * your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, but |
| * WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or |
| * NON INFRINGEMENT. See the GNU General Public License for more |
| * details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. |
| * |
| * Send feedback to <colpatch@us.ibm.com> |
| * |
| */ |
| |
| #include <linux/mm.h> |
| #include <linux/init.h> |
| #include <asm/io.h> |
| #include <asm/bios_ebda.h> |
| |
| /* |
| * APIC driver for the IBM "Summit" chipset. |
| */ |
| #include <linux/threads.h> |
| #include <linux/cpumask.h> |
| #include <asm/mpspec.h> |
| #include <asm/apic.h> |
| #include <asm/smp.h> |
| #include <asm/fixmap.h> |
| #include <asm/apicdef.h> |
| #include <asm/ipi.h> |
| #include <linux/kernel.h> |
| #include <linux/string.h> |
| #include <linux/gfp.h> |
| #include <linux/smp.h> |
| |
| static unsigned summit_get_apic_id(unsigned long x) |
| { |
| return (x >> 24) & 0xFF; |
| } |
| |
| static inline void summit_send_IPI_mask(const struct cpumask *mask, int vector) |
| { |
| default_send_IPI_mask_sequence_logical(mask, vector); |
| } |
| |
| static void summit_send_IPI_allbutself(int vector) |
| { |
| default_send_IPI_mask_allbutself_logical(cpu_online_mask, vector); |
| } |
| |
| static void summit_send_IPI_all(int vector) |
| { |
| summit_send_IPI_mask(cpu_online_mask, vector); |
| } |
| |
| #include <asm/tsc.h> |
| |
| extern int use_cyclone; |
| |
| #ifdef CONFIG_X86_SUMMIT_NUMA |
| static void setup_summit(void); |
| #else |
| static inline void setup_summit(void) {} |
| #endif |
| |
| static int summit_mps_oem_check(struct mpc_table *mpc, char *oem, |
| char *productid) |
| { |
| if (!strncmp(oem, "IBM ENSW", 8) && |
| (!strncmp(productid, "VIGIL SMP", 9) |
| || !strncmp(productid, "EXA", 3) |
| || !strncmp(productid, "RUTHLESS SMP", 12))){ |
| mark_tsc_unstable("Summit based system"); |
| use_cyclone = 1; /*enable cyclone-timer*/ |
| setup_summit(); |
| return 1; |
| } |
| return 0; |
| } |
| |
| /* Hook from generic ACPI tables.c */ |
| static int summit_acpi_madt_oem_check(char *oem_id, char *oem_table_id) |
| { |
| if (!strncmp(oem_id, "IBM", 3) && |
| (!strncmp(oem_table_id, "SERVIGIL", 8) |
| || !strncmp(oem_table_id, "EXA", 3))){ |
| mark_tsc_unstable("Summit based system"); |
| use_cyclone = 1; /*enable cyclone-timer*/ |
| setup_summit(); |
| return 1; |
| } |
| return 0; |
| } |
| |
| struct rio_table_hdr { |
| unsigned char version; /* Version number of this data structure */ |
| /* Version 3 adds chassis_num & WP_index */ |
| unsigned char num_scal_dev; /* # of Scalability devices (Twisters for Vigil) */ |
| unsigned char num_rio_dev; /* # of RIO I/O devices (Cyclones and Winnipegs) */ |
| } __attribute__((packed)); |
| |
| struct scal_detail { |
| unsigned char node_id; /* Scalability Node ID */ |
| unsigned long CBAR; /* Address of 1MB register space */ |
| unsigned char port0node; /* Node ID port connected to: 0xFF=None */ |
| unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ |
| unsigned char port1node; /* Node ID port connected to: 0xFF = None */ |
| unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ |
| unsigned char port2node; /* Node ID port connected to: 0xFF = None */ |
| unsigned char port2port; /* Port num port connected to: 0,1,2, or 0xFF=None */ |
| unsigned char chassis_num; /* 1 based Chassis number (1 = boot node) */ |
| } __attribute__((packed)); |
| |
| struct rio_detail { |
| unsigned char node_id; /* RIO Node ID */ |
| unsigned long BBAR; /* Address of 1MB register space */ |
| unsigned char type; /* Type of device */ |
| unsigned char owner_id; /* For WPEG: Node ID of Cyclone that owns this WPEG*/ |
| /* For CYC: Node ID of Twister that owns this CYC */ |
| unsigned char port0node; /* Node ID port connected to: 0xFF=None */ |
| unsigned char port0port; /* Port num port connected to: 0,1,2, or 0xFF=None */ |
| unsigned char port1node; /* Node ID port connected to: 0xFF=None */ |
| unsigned char port1port; /* Port num port connected to: 0,1,2, or 0xFF=None */ |
| unsigned char first_slot; /* For WPEG: Lowest slot number below this WPEG */ |
| /* For CYC: 0 */ |
| unsigned char status; /* For WPEG: Bit 0 = 1 : the XAPIC is used */ |
| /* = 0 : the XAPIC is not used, ie:*/ |
| /* ints fwded to another XAPIC */ |
| /* Bits1:7 Reserved */ |
| /* For CYC: Bits0:7 Reserved */ |
| unsigned char WP_index; /* For WPEG: WPEG instance index - lower ones have */ |
| /* lower slot numbers/PCI bus numbers */ |
| /* For CYC: No meaning */ |
| unsigned char chassis_num; /* 1 based Chassis number */ |
| /* For LookOut WPEGs this field indicates the */ |
| /* Expansion Chassis #, enumerated from Boot */ |
| /* Node WPEG external port, then Boot Node CYC */ |
| /* external port, then Next Vigil chassis WPEG */ |
| /* external port, etc. */ |
| /* Shared Lookouts have only 1 chassis number (the */ |
| /* first one assigned) */ |
| } __attribute__((packed)); |
| |
| |
| typedef enum { |
| CompatTwister = 0, /* Compatibility Twister */ |
| AltTwister = 1, /* Alternate Twister of internal 8-way */ |
| CompatCyclone = 2, /* Compatibility Cyclone */ |
| AltCyclone = 3, /* Alternate Cyclone of internal 8-way */ |
| CompatWPEG = 4, /* Compatibility WPEG */ |
| AltWPEG = 5, /* Second Planar WPEG */ |
| LookOutAWPEG = 6, /* LookOut WPEG */ |
| LookOutBWPEG = 7, /* LookOut WPEG */ |
| } node_type; |
| |
| static inline int is_WPEG(struct rio_detail *rio){ |
| return (rio->type == CompatWPEG || rio->type == AltWPEG || |
| rio->type == LookOutAWPEG || rio->type == LookOutBWPEG); |
| } |
| |
| #define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER) |
| |
| static const struct cpumask *summit_target_cpus(void) |
| { |
| /* CPU_MASK_ALL (0xff) has undefined behaviour with |
| * dest_LowestPrio mode logical clustered apic interrupt routing |
| * Just start on cpu 0. IRQ balancing will spread load |
| */ |
| return cpumask_of(0); |
| } |
| |
| static unsigned long summit_check_apicid_used(physid_mask_t *map, int apicid) |
| { |
| return 0; |
| } |
| |
| /* we don't use the phys_cpu_present_map to indicate apicid presence */ |
| static unsigned long summit_check_apicid_present(int bit) |
| { |
| return 1; |
| } |
| |
| static int summit_early_logical_apicid(int cpu) |
| { |
| int count = 0; |
| u8 my_id = early_per_cpu(x86_cpu_to_apicid, cpu); |
| u8 my_cluster = APIC_CLUSTER(my_id); |
| #ifdef CONFIG_SMP |
| u8 lid; |
| int i; |
| |
| /* Create logical APIC IDs by counting CPUs already in cluster. */ |
| for (count = 0, i = nr_cpu_ids; --i >= 0; ) { |
| lid = early_per_cpu(x86_cpu_to_logical_apicid, i); |
| if (lid != BAD_APICID && APIC_CLUSTER(lid) == my_cluster) |
| ++count; |
| } |
| #endif |
| /* We only have a 4 wide bitmap in cluster mode. If a deranged |
| * BIOS puts 5 CPUs in one APIC cluster, we're hosed. */ |
| BUG_ON(count >= XAPIC_DEST_CPUS_SHIFT); |
| return my_cluster | (1UL << count); |
| } |
| |
| static void summit_init_apic_ldr(void) |
| { |
| int cpu = smp_processor_id(); |
| unsigned long id = early_per_cpu(x86_cpu_to_logical_apicid, cpu); |
| unsigned long val; |
| |
| apic_write(APIC_DFR, SUMMIT_APIC_DFR_VALUE); |
| val = apic_read(APIC_LDR) & ~APIC_LDR_MASK; |
| val |= SET_APIC_LOGICAL_ID(id); |
| apic_write(APIC_LDR, val); |
| } |
| |
| static int summit_apic_id_registered(void) |
| { |
| return 1; |
| } |
| |
| static void summit_setup_apic_routing(void) |
| { |
| printk("Enabling APIC mode: Summit. Using %d I/O APICs\n", |
| nr_ioapics); |
| } |
| |
| static int summit_cpu_present_to_apicid(int mps_cpu) |
| { |
| if (mps_cpu < nr_cpu_ids) |
| return (int)per_cpu(x86_bios_cpu_apicid, mps_cpu); |
| else |
| return BAD_APICID; |
| } |
| |
| static void summit_ioapic_phys_id_map(physid_mask_t *phys_id_map, physid_mask_t *retmap) |
| { |
| /* For clustered we don't have a good way to do this yet - hack */ |
| physids_promote(0x0FL, retmap); |
| } |
| |
| static void summit_apicid_to_cpu_present(int apicid, physid_mask_t *retmap) |
| { |
| physid_set_mask_of_physid(0, retmap); |
| } |
| |
| static int summit_check_phys_apicid_present(int physical_apicid) |
| { |
| return 1; |
| } |
| |
| static unsigned int summit_cpu_mask_to_apicid(const struct cpumask *cpumask) |
| { |
| unsigned int round = 0; |
| int cpu, apicid = 0; |
| |
| /* |
| * The cpus in the mask must all be on the apic cluster. |
| */ |
| for_each_cpu(cpu, cpumask) { |
| int new_apicid = early_per_cpu(x86_cpu_to_logical_apicid, cpu); |
| |
| if (round && APIC_CLUSTER(apicid) != APIC_CLUSTER(new_apicid)) { |
| printk("%s: Not a valid mask!\n", __func__); |
| return BAD_APICID; |
| } |
| apicid |= new_apicid; |
| round++; |
| } |
| return apicid; |
| } |
| |
| static unsigned int summit_cpu_mask_to_apicid_and(const struct cpumask *inmask, |
| const struct cpumask *andmask) |
| { |
| int apicid = early_per_cpu(x86_cpu_to_logical_apicid, 0); |
| cpumask_var_t cpumask; |
| |
| if (!alloc_cpumask_var(&cpumask, GFP_ATOMIC)) |
| return apicid; |
| |
| cpumask_and(cpumask, inmask, andmask); |
| cpumask_and(cpumask, cpumask, cpu_online_mask); |
| apicid = summit_cpu_mask_to_apicid(cpumask); |
| |
| free_cpumask_var(cpumask); |
| |
| return apicid; |
| } |
| |
| /* |
| * cpuid returns the value latched in the HW at reset, not the APIC ID |
| * register's value. For any box whose BIOS changes APIC IDs, like |
| * clustered APIC systems, we must use hard_smp_processor_id. |
| * |
| * See Intel's IA-32 SW Dev's Manual Vol2 under CPUID. |
| */ |
| static int summit_phys_pkg_id(int cpuid_apic, int index_msb) |
| { |
| return hard_smp_processor_id() >> index_msb; |
| } |
| |
| static int probe_summit(void) |
| { |
| /* probed later in mptable/ACPI hooks */ |
| return 0; |
| } |
| |
| static void summit_vector_allocation_domain(int cpu, struct cpumask *retmask) |
| { |
| /* Careful. Some cpus do not strictly honor the set of cpus |
| * specified in the interrupt destination when using lowest |
| * priority interrupt delivery mode. |
| * |
| * In particular there was a hyperthreading cpu observed to |
| * deliver interrupts to the wrong hyperthread when only one |
| * hyperthread was specified in the interrupt desitination. |
| */ |
| cpumask_clear(retmask); |
| cpumask_bits(retmask)[0] = APIC_ALL_CPUS; |
| } |
| |
| #ifdef CONFIG_X86_SUMMIT_NUMA |
| static struct rio_table_hdr *rio_table_hdr; |
| static struct scal_detail *scal_devs[MAX_NUMNODES]; |
| static struct rio_detail *rio_devs[MAX_NUMNODES*4]; |
| |
| #ifndef CONFIG_X86_NUMAQ |
| static int mp_bus_id_to_node[MAX_MP_BUSSES]; |
| #endif |
| |
| static int setup_pci_node_map_for_wpeg(int wpeg_num, int last_bus) |
| { |
| int twister = 0, node = 0; |
| int i, bus, num_buses; |
| |
| for (i = 0; i < rio_table_hdr->num_rio_dev; i++) { |
| if (rio_devs[i]->node_id == rio_devs[wpeg_num]->owner_id) { |
| twister = rio_devs[i]->owner_id; |
| break; |
| } |
| } |
| if (i == rio_table_hdr->num_rio_dev) { |
| printk(KERN_ERR "%s: Couldn't find owner Cyclone for Winnipeg!\n", __func__); |
| return last_bus; |
| } |
| |
| for (i = 0; i < rio_table_hdr->num_scal_dev; i++) { |
| if (scal_devs[i]->node_id == twister) { |
| node = scal_devs[i]->node_id; |
| break; |
| } |
| } |
| if (i == rio_table_hdr->num_scal_dev) { |
| printk(KERN_ERR "%s: Couldn't find owner Twister for Cyclone!\n", __func__); |
| return last_bus; |
| } |
| |
| switch (rio_devs[wpeg_num]->type) { |
| case CompatWPEG: |
| /* |
| * The Compatibility Winnipeg controls the 2 legacy buses, |
| * the 66MHz PCI bus [2 slots] and the 2 "extra" buses in case |
| * a PCI-PCI bridge card is used in either slot: total 5 buses. |
| */ |
| num_buses = 5; |
| break; |
| case AltWPEG: |
| /* |
| * The Alternate Winnipeg controls the 2 133MHz buses [1 slot |
| * each], their 2 "extra" buses, the 100MHz bus [2 slots] and |
| * the "extra" buses for each of those slots: total 7 buses. |
| */ |
| num_buses = 7; |
| break; |
| case LookOutAWPEG: |
| case LookOutBWPEG: |
| /* |
| * A Lookout Winnipeg controls 3 100MHz buses [2 slots each] |
| * & the "extra" buses for each of those slots: total 9 buses. |
| */ |
| num_buses = 9; |
| break; |
| default: |
| printk(KERN_INFO "%s: Unsupported Winnipeg type!\n", __func__); |
| return last_bus; |
| } |
| |
| for (bus = last_bus; bus < last_bus + num_buses; bus++) |
| mp_bus_id_to_node[bus] = node; |
| return bus; |
| } |
| |
| static int build_detail_arrays(void) |
| { |
| unsigned long ptr; |
| int i, scal_detail_size, rio_detail_size; |
| |
| if (rio_table_hdr->num_scal_dev > MAX_NUMNODES) { |
| printk(KERN_WARNING "%s: MAX_NUMNODES too low! Defined as %d, but system has %d nodes.\n", __func__, MAX_NUMNODES, rio_table_hdr->num_scal_dev); |
| return 0; |
| } |
| |
| switch (rio_table_hdr->version) { |
| default: |
| printk(KERN_WARNING "%s: Invalid Rio Grande Table Version: %d\n", __func__, rio_table_hdr->version); |
| return 0; |
| case 2: |
| scal_detail_size = 11; |
| rio_detail_size = 13; |
| break; |
| case 3: |
| scal_detail_size = 12; |
| rio_detail_size = 15; |
| break; |
| } |
| |
| ptr = (unsigned long)rio_table_hdr + 3; |
| for (i = 0; i < rio_table_hdr->num_scal_dev; i++, ptr += scal_detail_size) |
| scal_devs[i] = (struct scal_detail *)ptr; |
| |
| for (i = 0; i < rio_table_hdr->num_rio_dev; i++, ptr += rio_detail_size) |
| rio_devs[i] = (struct rio_detail *)ptr; |
| |
| return 1; |
| } |
| |
| void setup_summit(void) |
| { |
| unsigned long ptr; |
| unsigned short offset; |
| int i, next_wpeg, next_bus = 0; |
| |
| /* The pointer to the EBDA is stored in the word @ phys 0x40E(40:0E) */ |
| ptr = get_bios_ebda(); |
| ptr = (unsigned long)phys_to_virt(ptr); |
| |
| rio_table_hdr = NULL; |
| offset = 0x180; |
| while (offset) { |
| /* The block id is stored in the 2nd word */ |
| if (*((unsigned short *)(ptr + offset + 2)) == 0x4752) { |
| /* set the pointer past the offset & block id */ |
| rio_table_hdr = (struct rio_table_hdr *)(ptr + offset + 4); |
| break; |
| } |
| /* The next offset is stored in the 1st word. 0 means no more */ |
| offset = *((unsigned short *)(ptr + offset)); |
| } |
| if (!rio_table_hdr) { |
| printk(KERN_ERR "%s: Unable to locate Rio Grande Table in EBDA - bailing!\n", __func__); |
| return; |
| } |
| |
| if (!build_detail_arrays()) |
| return; |
| |
| /* The first Winnipeg we're looking for has an index of 0 */ |
| next_wpeg = 0; |
| do { |
| for (i = 0; i < rio_table_hdr->num_rio_dev; i++) { |
| if (is_WPEG(rio_devs[i]) && rio_devs[i]->WP_index == next_wpeg) { |
| /* It's the Winnipeg we're looking for! */ |
| next_bus = setup_pci_node_map_for_wpeg(i, next_bus); |
| next_wpeg++; |
| break; |
| } |
| } |
| /* |
| * If we go through all Rio devices and don't find one with |
| * the next index, it means we've found all the Winnipegs, |
| * and thus all the PCI buses. |
| */ |
| if (i == rio_table_hdr->num_rio_dev) |
| next_wpeg = 0; |
| } while (next_wpeg != 0); |
| } |
| #endif |
| |
| struct apic apic_summit = { |
| |
| .name = "summit", |
| .probe = probe_summit, |
| .acpi_madt_oem_check = summit_acpi_madt_oem_check, |
| .apic_id_registered = summit_apic_id_registered, |
| |
| .irq_delivery_mode = dest_LowestPrio, |
| /* logical delivery broadcast to all CPUs: */ |
| .irq_dest_mode = 1, |
| |
| .target_cpus = summit_target_cpus, |
| .disable_esr = 1, |
| .dest_logical = APIC_DEST_LOGICAL, |
| .check_apicid_used = summit_check_apicid_used, |
| .check_apicid_present = summit_check_apicid_present, |
| |
| .vector_allocation_domain = summit_vector_allocation_domain, |
| .init_apic_ldr = summit_init_apic_ldr, |
| |
| .ioapic_phys_id_map = summit_ioapic_phys_id_map, |
| .setup_apic_routing = summit_setup_apic_routing, |
| .multi_timer_check = NULL, |
| .cpu_present_to_apicid = summit_cpu_present_to_apicid, |
| .apicid_to_cpu_present = summit_apicid_to_cpu_present, |
| .setup_portio_remap = NULL, |
| .check_phys_apicid_present = summit_check_phys_apicid_present, |
| .enable_apic_mode = NULL, |
| .phys_pkg_id = summit_phys_pkg_id, |
| .mps_oem_check = summit_mps_oem_check, |
| |
| .get_apic_id = summit_get_apic_id, |
| .set_apic_id = NULL, |
| .apic_id_mask = 0xFF << 24, |
| |
| .cpu_mask_to_apicid = summit_cpu_mask_to_apicid, |
| .cpu_mask_to_apicid_and = summit_cpu_mask_to_apicid_and, |
| |
| .send_IPI_mask = summit_send_IPI_mask, |
| .send_IPI_mask_allbutself = NULL, |
| .send_IPI_allbutself = summit_send_IPI_allbutself, |
| .send_IPI_all = summit_send_IPI_all, |
| .send_IPI_self = default_send_IPI_self, |
| |
| .trampoline_phys_low = DEFAULT_TRAMPOLINE_PHYS_LOW, |
| .trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH, |
| |
| .wait_for_init_deassert = default_wait_for_init_deassert, |
| |
| .smp_callin_clear_local_apic = NULL, |
| .inquire_remote_apic = default_inquire_remote_apic, |
| |
| .read = native_apic_mem_read, |
| .write = native_apic_mem_write, |
| .icr_read = native_apic_icr_read, |
| .icr_write = native_apic_icr_write, |
| .wait_icr_idle = native_apic_wait_icr_idle, |
| .safe_wait_icr_idle = native_safe_apic_wait_icr_idle, |
| |
| .x86_32_early_logical_apicid = summit_early_logical_apicid, |
| .x86_32_numa_cpu_node = default_x86_32_numa_cpu_node, |
| }; |