| /* |
| * Driver for GE FPGA based GPIO |
| * |
| * Author: Martyn Welch <martyn.welch@ge.com> |
| * |
| * 2008 (c) GE Intelligent Platforms Embedded Systems, Inc. |
| * |
| * This file is licensed under the terms of the GNU General Public License |
| * version 2. This program is licensed "as is" without any warranty of any |
| * kind, whether express or implied. |
| */ |
| |
| /* TODO |
| * |
| * Configuration of output modes (totem-pole/open-drain) |
| * Interrupt configuration - interrupts are always generated the FPGA relies on |
| * the I/O interrupt controllers mask to stop them propergating |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/compiler.h> |
| #include <linux/init.h> |
| #include <linux/io.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_platform.h> |
| #include <linux/of_gpio.h> |
| #include <linux/gpio.h> |
| #include <linux/slab.h> |
| |
| #define GEF_GPIO_DIRECT 0x00 |
| #define GEF_GPIO_IN 0x04 |
| #define GEF_GPIO_OUT 0x08 |
| #define GEF_GPIO_TRIG 0x0C |
| #define GEF_GPIO_POLAR_A 0x10 |
| #define GEF_GPIO_POLAR_B 0x14 |
| #define GEF_GPIO_INT_STAT 0x18 |
| #define GEF_GPIO_OVERRUN 0x1C |
| #define GEF_GPIO_MODE 0x20 |
| |
| static void _gef_gpio_set(void __iomem *reg, unsigned int offset, int value) |
| { |
| unsigned int data; |
| |
| data = ioread32be(reg); |
| /* value: 0=low; 1=high */ |
| if (value & 0x1) |
| data = data | (0x1 << offset); |
| else |
| data = data & ~(0x1 << offset); |
| |
| iowrite32be(data, reg); |
| } |
| |
| |
| static int gef_gpio_dir_in(struct gpio_chip *chip, unsigned offset) |
| { |
| unsigned int data; |
| struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); |
| |
| data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT); |
| data = data | (0x1 << offset); |
| iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT); |
| |
| return 0; |
| } |
| |
| static int gef_gpio_dir_out(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| unsigned int data; |
| struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); |
| |
| /* Set direction before switching to input */ |
| _gef_gpio_set(mmchip->regs + GEF_GPIO_OUT, offset, value); |
| |
| data = ioread32be(mmchip->regs + GEF_GPIO_DIRECT); |
| data = data & ~(0x1 << offset); |
| iowrite32be(data, mmchip->regs + GEF_GPIO_DIRECT); |
| |
| return 0; |
| } |
| |
| static int gef_gpio_get(struct gpio_chip *chip, unsigned offset) |
| { |
| unsigned int data; |
| int state = 0; |
| struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); |
| |
| data = ioread32be(mmchip->regs + GEF_GPIO_IN); |
| state = (int)((data >> offset) & 0x1); |
| |
| return state; |
| } |
| |
| static void gef_gpio_set(struct gpio_chip *chip, unsigned offset, int value) |
| { |
| struct of_mm_gpio_chip *mmchip = to_of_mm_gpio_chip(chip); |
| |
| _gef_gpio_set(mmchip->regs + GEF_GPIO_OUT, offset, value); |
| } |
| |
| static int __init gef_gpio_init(void) |
| { |
| struct device_node *np; |
| int retval; |
| struct of_mm_gpio_chip *gef_gpio_chip; |
| |
| for_each_compatible_node(np, NULL, "gef,sbc610-gpio") { |
| |
| pr_debug("%s: Initialising GEF GPIO\n", np->full_name); |
| |
| /* Allocate chip structure */ |
| gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL); |
| if (!gef_gpio_chip) { |
| pr_err("%s: Unable to allocate structure\n", |
| np->full_name); |
| continue; |
| } |
| |
| /* Setup pointers to chip functions */ |
| gef_gpio_chip->of_gc.gpio_cells = 2; |
| gef_gpio_chip->of_gc.gc.ngpio = 19; |
| gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in; |
| gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out; |
| gef_gpio_chip->of_gc.gc.get = gef_gpio_get; |
| gef_gpio_chip->of_gc.gc.set = gef_gpio_set; |
| |
| /* This function adds a memory mapped GPIO chip */ |
| retval = of_mm_gpiochip_add(np, gef_gpio_chip); |
| if (retval) { |
| kfree(gef_gpio_chip); |
| pr_err("%s: Unable to add GPIO\n", np->full_name); |
| } |
| } |
| |
| for_each_compatible_node(np, NULL, "gef,sbc310-gpio") { |
| |
| pr_debug("%s: Initialising GEF GPIO\n", np->full_name); |
| |
| /* Allocate chip structure */ |
| gef_gpio_chip = kzalloc(sizeof(*gef_gpio_chip), GFP_KERNEL); |
| if (!gef_gpio_chip) { |
| pr_err("%s: Unable to allocate structure\n", |
| np->full_name); |
| continue; |
| } |
| |
| /* Setup pointers to chip functions */ |
| gef_gpio_chip->of_gc.gpio_cells = 2; |
| gef_gpio_chip->of_gc.gc.ngpio = 6; |
| gef_gpio_chip->of_gc.gc.direction_input = gef_gpio_dir_in; |
| gef_gpio_chip->of_gc.gc.direction_output = gef_gpio_dir_out; |
| gef_gpio_chip->of_gc.gc.get = gef_gpio_get; |
| gef_gpio_chip->of_gc.gc.set = gef_gpio_set; |
| |
| /* This function adds a memory mapped GPIO chip */ |
| retval = of_mm_gpiochip_add(np, gef_gpio_chip); |
| if (retval) { |
| kfree(gef_gpio_chip); |
| pr_err("%s: Unable to add GPIO\n", np->full_name); |
| } |
| } |
| |
| return 0; |
| }; |
| arch_initcall(gef_gpio_init); |
| |
| MODULE_DESCRIPTION("GE I/O FPGA GPIO driver"); |
| MODULE_AUTHOR("Martyn Welch <martyn.welch@ge.com"); |
| MODULE_LICENSE("GPL"); |