| /* | |
| * linux/arch/alpha/kernel/irq_i8259.c | |
| * | |
| * This is the 'legacy' 8259A Programmable Interrupt Controller, | |
| * present in the majority of PC/AT boxes. | |
| * | |
| * Started hacking from linux-2.3.30pre6/arch/i386/kernel/i8259.c. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/cache.h> | |
| #include <linux/sched.h> | |
| #include <linux/irq.h> | |
| #include <linux/interrupt.h> | |
| #include <asm/io.h> | |
| #include "proto.h" | |
| #include "irq_impl.h" | |
| /* Note mask bit is true for DISABLED irqs. */ | |
| static unsigned int cached_irq_mask = 0xffff; | |
| static DEFINE_SPINLOCK(i8259_irq_lock); | |
| static inline void | |
| i8259_update_irq_hw(unsigned int irq, unsigned long mask) | |
| { | |
| int port = 0x21; | |
| if (irq & 8) mask >>= 8; | |
| if (irq & 8) port = 0xA1; | |
| outb(mask, port); | |
| } | |
| inline void | |
| i8259a_enable_irq(struct irq_data *d) | |
| { | |
| spin_lock(&i8259_irq_lock); | |
| i8259_update_irq_hw(d->irq, cached_irq_mask &= ~(1 << d->irq)); | |
| spin_unlock(&i8259_irq_lock); | |
| } | |
| static inline void | |
| __i8259a_disable_irq(unsigned int irq) | |
| { | |
| i8259_update_irq_hw(irq, cached_irq_mask |= 1 << irq); | |
| } | |
| void | |
| i8259a_disable_irq(struct irq_data *d) | |
| { | |
| spin_lock(&i8259_irq_lock); | |
| __i8259a_disable_irq(d->irq); | |
| spin_unlock(&i8259_irq_lock); | |
| } | |
| void | |
| i8259a_mask_and_ack_irq(struct irq_data *d) | |
| { | |
| unsigned int irq = d->irq; | |
| spin_lock(&i8259_irq_lock); | |
| __i8259a_disable_irq(irq); | |
| /* Ack the interrupt making it the lowest priority. */ | |
| if (irq >= 8) { | |
| outb(0xE0 | (irq - 8), 0xa0); /* ack the slave */ | |
| irq = 2; | |
| } | |
| outb(0xE0 | irq, 0x20); /* ack the master */ | |
| spin_unlock(&i8259_irq_lock); | |
| } | |
| struct irq_chip i8259a_irq_type = { | |
| .name = "XT-PIC", | |
| .irq_unmask = i8259a_enable_irq, | |
| .irq_mask = i8259a_disable_irq, | |
| .irq_mask_ack = i8259a_mask_and_ack_irq, | |
| }; | |
| void __init | |
| init_i8259a_irqs(void) | |
| { | |
| static struct irqaction cascade = { | |
| .handler = no_action, | |
| .name = "cascade", | |
| }; | |
| long i; | |
| outb(0xff, 0x21); /* mask all of 8259A-1 */ | |
| outb(0xff, 0xA1); /* mask all of 8259A-2 */ | |
| for (i = 0; i < 16; i++) { | |
| irq_set_chip_and_handler(i, &i8259a_irq_type, handle_level_irq); | |
| } | |
| setup_irq(2, &cascade); | |
| } | |
| #if defined(CONFIG_ALPHA_GENERIC) | |
| # define IACK_SC alpha_mv.iack_sc | |
| #elif defined(CONFIG_ALPHA_APECS) | |
| # define IACK_SC APECS_IACK_SC | |
| #elif defined(CONFIG_ALPHA_LCA) | |
| # define IACK_SC LCA_IACK_SC | |
| #elif defined(CONFIG_ALPHA_CIA) | |
| # define IACK_SC CIA_IACK_SC | |
| #elif defined(CONFIG_ALPHA_PYXIS) | |
| # define IACK_SC PYXIS_IACK_SC | |
| #elif defined(CONFIG_ALPHA_TITAN) | |
| # define IACK_SC TITAN_IACK_SC | |
| #elif defined(CONFIG_ALPHA_TSUNAMI) | |
| # define IACK_SC TSUNAMI_IACK_SC | |
| #elif defined(CONFIG_ALPHA_IRONGATE) | |
| # define IACK_SC IRONGATE_IACK_SC | |
| #endif | |
| /* Note that CONFIG_ALPHA_POLARIS is intentionally left out here, since | |
| sys_rx164 wants to use isa_no_iack_sc_device_interrupt for some reason. */ | |
| #if defined(IACK_SC) | |
| void | |
| isa_device_interrupt(unsigned long vector) | |
| { | |
| /* | |
| * Generate a PCI interrupt acknowledge cycle. The PIC will | |
| * respond with the interrupt vector of the highest priority | |
| * interrupt that is pending. The PALcode sets up the | |
| * interrupts vectors such that irq level L generates vector L. | |
| */ | |
| int j = *(vuip) IACK_SC; | |
| j &= 0xff; | |
| handle_irq(j); | |
| } | |
| #endif | |
| #if defined(CONFIG_ALPHA_GENERIC) || !defined(IACK_SC) | |
| void | |
| isa_no_iack_sc_device_interrupt(unsigned long vector) | |
| { | |
| unsigned long pic; | |
| /* | |
| * It seems to me that the probability of two or more *device* | |
| * interrupts occurring at almost exactly the same time is | |
| * pretty low. So why pay the price of checking for | |
| * additional interrupts here if the common case can be | |
| * handled so much easier? | |
| */ | |
| /* | |
| * The first read of gives you *all* interrupting lines. | |
| * Therefore, read the mask register and and out those lines | |
| * not enabled. Note that some documentation has 21 and a1 | |
| * write only. This is not true. | |
| */ | |
| pic = inb(0x20) | (inb(0xA0) << 8); /* read isr */ | |
| pic &= 0xFFFB; /* mask out cascade & hibits */ | |
| while (pic) { | |
| int j = ffz(~pic); | |
| pic &= pic - 1; | |
| handle_irq(j); | |
| } | |
| } | |
| #endif |