| /* | |
| * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com) | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/kernel.h> | |
| #include <linux/mm.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/memblock.h> | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| #include <linux/initrd.h> | |
| #endif | |
| #include <linux/of_fdt.h> | |
| #include <linux/swap.h> | |
| #include <linux/module.h> | |
| #include <linux/highmem.h> | |
| #include <asm/page.h> | |
| #include <asm/pgalloc.h> | |
| #include <asm/sections.h> | |
| #include <asm/arcregs.h> | |
| pgd_t swapper_pg_dir[PTRS_PER_PGD] __aligned(PAGE_SIZE); | |
| char empty_zero_page[PAGE_SIZE] __aligned(PAGE_SIZE); | |
| EXPORT_SYMBOL(empty_zero_page); | |
| static const unsigned long low_mem_start = CONFIG_LINUX_LINK_BASE; | |
| static unsigned long low_mem_sz; | |
| #ifdef CONFIG_HIGHMEM | |
| static unsigned long min_high_pfn, max_high_pfn; | |
| static u64 high_mem_start; | |
| static u64 high_mem_sz; | |
| #endif | |
| #ifdef CONFIG_DISCONTIGMEM | |
| struct pglist_data node_data[MAX_NUMNODES] __read_mostly; | |
| EXPORT_SYMBOL(node_data); | |
| #endif | |
| /* User can over-ride above with "mem=nnn[KkMm]" in cmdline */ | |
| static int __init setup_mem_sz(char *str) | |
| { | |
| low_mem_sz = memparse(str, NULL) & PAGE_MASK; | |
| /* early console might not be setup yet - it will show up later */ | |
| pr_info("\"mem=%s\": mem sz set to %ldM\n", str, TO_MB(low_mem_sz)); | |
| return 0; | |
| } | |
| early_param("mem", setup_mem_sz); | |
| void __init early_init_dt_add_memory_arch(u64 base, u64 size) | |
| { | |
| int in_use = 0; | |
| if (!low_mem_sz) { | |
| if (base != low_mem_start) | |
| panic("CONFIG_LINUX_LINK_BASE != DT memory { }"); | |
| low_mem_sz = size; | |
| in_use = 1; | |
| } else { | |
| #ifdef CONFIG_HIGHMEM | |
| high_mem_start = base; | |
| high_mem_sz = size; | |
| in_use = 1; | |
| #endif | |
| } | |
| pr_info("Memory @ %llx [%lldM] %s\n", | |
| base, TO_MB(size), !in_use ? "Not used":""); | |
| } | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| static int __init early_initrd(char *p) | |
| { | |
| unsigned long start, size; | |
| char *endp; | |
| start = memparse(p, &endp); | |
| if (*endp == ',') { | |
| size = memparse(endp + 1, NULL); | |
| initrd_start = (unsigned long)__va(start); | |
| initrd_end = (unsigned long)__va(start + size); | |
| } | |
| return 0; | |
| } | |
| early_param("initrd", early_initrd); | |
| #endif | |
| /* | |
| * First memory setup routine called from setup_arch() | |
| * 1. setup swapper's mm @init_mm | |
| * 2. Count the pages we have and setup bootmem allocator | |
| * 3. zone setup | |
| */ | |
| void __init setup_arch_memory(void) | |
| { | |
| unsigned long zones_size[MAX_NR_ZONES]; | |
| unsigned long zones_holes[MAX_NR_ZONES]; | |
| init_mm.start_code = (unsigned long)_text; | |
| init_mm.end_code = (unsigned long)_etext; | |
| init_mm.end_data = (unsigned long)_edata; | |
| init_mm.brk = (unsigned long)_end; | |
| /* first page of system - kernel .vector starts here */ | |
| min_low_pfn = ARCH_PFN_OFFSET; | |
| /* Last usable page of low mem */ | |
| max_low_pfn = max_pfn = PFN_DOWN(low_mem_start + low_mem_sz); | |
| #ifdef CONFIG_FLATMEM | |
| /* pfn_valid() uses this */ | |
| max_mapnr = max_low_pfn - min_low_pfn; | |
| #endif | |
| /*------------- bootmem allocator setup -----------------------*/ | |
| /* | |
| * seed the bootmem allocator after any DT memory node parsing or | |
| * "mem=xxx" cmdline overrides have potentially updated @arc_mem_sz | |
| * | |
| * Only low mem is added, otherwise we have crashes when allocating | |
| * mem_map[] itself. NO_BOOTMEM allocates mem_map[] at the end of | |
| * avail memory, ending in highmem with a > 32-bit address. However | |
| * it then tries to memset it with a truncaed 32-bit handle, causing | |
| * the crash | |
| */ | |
| memblock_add_node(low_mem_start, low_mem_sz, 0); | |
| memblock_reserve(low_mem_start, __pa(_end) - low_mem_start); | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| if (initrd_start) | |
| memblock_reserve(__pa(initrd_start), initrd_end - initrd_start); | |
| #endif | |
| early_init_fdt_reserve_self(); | |
| early_init_fdt_scan_reserved_mem(); | |
| memblock_dump_all(); | |
| /*----------------- node/zones setup --------------------------*/ | |
| memset(zones_size, 0, sizeof(zones_size)); | |
| memset(zones_holes, 0, sizeof(zones_holes)); | |
| zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn; | |
| zones_holes[ZONE_NORMAL] = 0; | |
| /* | |
| * We can't use the helper free_area_init(zones[]) because it uses | |
| * PAGE_OFFSET to compute the @min_low_pfn which would be wrong | |
| * when our kernel doesn't start at PAGE_OFFSET, i.e. | |
| * PAGE_OFFSET != CONFIG_LINUX_LINK_BASE | |
| */ | |
| free_area_init_node(0, /* node-id */ | |
| zones_size, /* num pages per zone */ | |
| min_low_pfn, /* first pfn of node */ | |
| zones_holes); /* holes */ | |
| #ifdef CONFIG_HIGHMEM | |
| /* | |
| * Populate a new node with highmem | |
| * | |
| * On ARC (w/o PAE) HIGHMEM addresses are actually smaller (0 based) | |
| * than addresses in normal ala low memory (0x8000_0000 based). | |
| * Even with PAE, the huge peripheral space hole would waste a lot of | |
| * mem with single mem_map[]. This warrants a mem_map per region design. | |
| * Thus HIGHMEM on ARC is imlemented with DISCONTIGMEM. | |
| * | |
| * DISCONTIGMEM in turns requires multiple nodes. node 0 above is | |
| * populated with normal memory zone while node 1 only has highmem | |
| */ | |
| node_set_online(1); | |
| min_high_pfn = PFN_DOWN(high_mem_start); | |
| max_high_pfn = PFN_DOWN(high_mem_start + high_mem_sz); | |
| zones_size[ZONE_NORMAL] = 0; | |
| zones_holes[ZONE_NORMAL] = 0; | |
| zones_size[ZONE_HIGHMEM] = max_high_pfn - min_high_pfn; | |
| zones_holes[ZONE_HIGHMEM] = 0; | |
| free_area_init_node(1, /* node-id */ | |
| zones_size, /* num pages per zone */ | |
| min_high_pfn, /* first pfn of node */ | |
| zones_holes); /* holes */ | |
| high_memory = (void *)(min_high_pfn << PAGE_SHIFT); | |
| kmap_init(); | |
| #endif | |
| } | |
| /* | |
| * mem_init - initializes memory | |
| * | |
| * Frees up bootmem | |
| * Calculates and displays memory available/used | |
| */ | |
| void __init mem_init(void) | |
| { | |
| #ifdef CONFIG_HIGHMEM | |
| unsigned long tmp; | |
| reset_all_zones_managed_pages(); | |
| for (tmp = min_high_pfn; tmp < max_high_pfn; tmp++) | |
| free_highmem_page(pfn_to_page(tmp)); | |
| #endif | |
| free_all_bootmem(); | |
| mem_init_print_info(NULL); | |
| } | |
| /* | |
| * free_initmem: Free all the __init memory. | |
| */ | |
| void __ref free_initmem(void) | |
| { | |
| free_initmem_default(-1); | |
| } | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| void __init free_initrd_mem(unsigned long start, unsigned long end) | |
| { | |
| free_reserved_area((void *)start, (void *)end, -1, "initrd"); | |
| } | |
| #endif |