| #include <dt-bindings/iio/qcom,spmi-vadc.h> | |
| #include <dt-bindings/interrupt-controller/irq.h> | |
| #include <dt-bindings/spmi/spmi.h> | |
| &spmi_bus { | |
| pm8916_0: pm8916@0 { | |
| compatible = "qcom,pm8916", "qcom,spmi-pmic"; | |
| reg = <0x0 SPMI_USID>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| rtc@6000 { | |
| compatible = "qcom,pm8941-rtc"; | |
| reg = <0x6000>; | |
| reg-names = "rtc", "alarm"; | |
| interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; | |
| }; | |
| pwrkey@800 { | |
| compatible = "qcom,pm8941-pwrkey"; | |
| reg = <0x800>; | |
| interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; | |
| debounce = <15625>; | |
| bias-pull-up; | |
| }; | |
| pm8916_gpios: gpios@c000 { | |
| compatible = "qcom,pm8916-gpio"; | |
| reg = <0xc000>; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| interrupts = <0 0xc0 0 IRQ_TYPE_NONE>, | |
| <0 0xc1 0 IRQ_TYPE_NONE>, | |
| <0 0xc2 0 IRQ_TYPE_NONE>, | |
| <0 0xc3 0 IRQ_TYPE_NONE>; | |
| }; | |
| pm8916_mpps: mpps@a000 { | |
| compatible = "qcom,pm8916-mpp"; | |
| reg = <0xa000>; | |
| gpio-controller; | |
| #gpio-cells = <2>; | |
| interrupts = <0 0xa0 0 IRQ_TYPE_NONE>, | |
| <0 0xa1 0 IRQ_TYPE_NONE>, | |
| <0 0xa2 0 IRQ_TYPE_NONE>, | |
| <0 0xa3 0 IRQ_TYPE_NONE>; | |
| }; | |
| pm8916_temp: temp-alarm@2400 { | |
| compatible = "qcom,spmi-temp-alarm"; | |
| reg = <0x2400>; | |
| interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; | |
| io-channels = <&pm8916_vadc VADC_DIE_TEMP>; | |
| io-channel-names = "thermal"; | |
| #thermal-sensor-cells = <0>; | |
| }; | |
| pm8916_vadc: vadc@3100 { | |
| compatible = "qcom,spmi-vadc"; | |
| reg = <0x3100>; | |
| interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| #io-channel-cells = <1>; | |
| usb_in { | |
| reg = <VADC_USBIN>; | |
| qcom,pre-scaling = <1 10>; | |
| }; | |
| vph_pwr { | |
| reg = <VADC_VSYS>; | |
| qcom,pre-scaling = <1 3>; | |
| }; | |
| die_temp { | |
| reg = <VADC_DIE_TEMP>; | |
| }; | |
| ref_625mv { | |
| reg = <VADC_REF_625MV>; | |
| }; | |
| ref_1250v { | |
| reg = <VADC_REF_1250MV>; | |
| }; | |
| ref_gnd { | |
| reg = <VADC_GND_REF>; | |
| }; | |
| ref_vdd { | |
| reg = <VADC_VDD_VADC>; | |
| }; | |
| }; | |
| }; | |
| pm8916_1: pm8916@1 { | |
| compatible = "qcom,spmi-pmic"; | |
| reg = <0x1 SPMI_USID>; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| }; | |
| }; |