| /* | |
| * Copyright (C) 2003-2006, Axis Communications AB. | |
| */ | |
| #include <linux/ptrace.h> | |
| #include <linux/module.h> | |
| #include <asm/uaccess.h> | |
| #include <hwregs/supp_reg.h> | |
| #include <hwregs/intr_vect_defs.h> | |
| #include <asm/irq.h> | |
| void show_registers(struct pt_regs *regs) | |
| { | |
| /* | |
| * It's possible to use either the USP register or current->thread.usp. | |
| * USP might not correspond to the current process for all cases this | |
| * function is called, and current->thread.usp isn't up to date for the | |
| * current process. Experience shows that using USP is the way to go. | |
| */ | |
| unsigned long usp = rdusp(); | |
| unsigned long d_mmu_cause; | |
| unsigned long i_mmu_cause; | |
| printk("CPU: %d\n", smp_processor_id()); | |
| printk("ERP: %08lx SRP: %08lx CCS: %08lx USP: %08lx MOF: %08lx\n", | |
| regs->erp, regs->srp, regs->ccs, usp, regs->mof); | |
| printk(" r0: %08lx r1: %08lx r2: %08lx r3: %08lx\n", | |
| regs->r0, regs->r1, regs->r2, regs->r3); | |
| printk(" r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n", | |
| regs->r4, regs->r5, regs->r6, regs->r7); | |
| printk(" r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n", | |
| regs->r8, regs->r9, regs->r10, regs->r11); | |
| printk("r12: %08lx r13: %08lx oR10: %08lx acr: %08lx\n", | |
| regs->r12, regs->r13, regs->orig_r10, regs->acr); | |
| printk(" sp: %08lx\n", (unsigned long)regs); | |
| SUPP_BANK_SEL(BANK_IM); | |
| SUPP_REG_RD(RW_MM_CAUSE, i_mmu_cause); | |
| SUPP_BANK_SEL(BANK_DM); | |
| SUPP_REG_RD(RW_MM_CAUSE, d_mmu_cause); | |
| printk(" Data MMU Cause: %08lx\n", d_mmu_cause); | |
| printk("Instruction MMU Cause: %08lx\n", i_mmu_cause); | |
| printk("Process %s (pid: %d, stackpage=%08lx)\n", | |
| current->comm, current->pid, (unsigned long)current); | |
| /* | |
| * When in-kernel, we also print out the stack and code at the | |
| * time of the fault.. | |
| */ | |
| if (!user_mode(regs)) { | |
| int i; | |
| show_stack(NULL, (unsigned long *)usp); | |
| /* | |
| * If the previous stack-dump wasn't a kernel one, dump the | |
| * kernel stack now. | |
| */ | |
| if (usp != 0) | |
| show_stack(NULL, NULL); | |
| printk("\nCode: "); | |
| if (regs->erp < PAGE_OFFSET) | |
| goto bad_value; | |
| /* | |
| * Quite often the value at regs->erp doesn't point to the | |
| * interesting instruction, which often is the previous | |
| * instruction. So dump at an offset large enough that the | |
| * instruction decoding should be in sync at the interesting | |
| * point, but small enough to fit on a row. The regs->erp | |
| * location is pointed out in a ksymoops-friendly way by | |
| * wrapping the byte for that address in parenthesises. | |
| */ | |
| for (i = -12; i < 12; i++) { | |
| unsigned char c; | |
| if (__get_user(c, &((unsigned char *)regs->erp)[i])) { | |
| bad_value: | |
| printk(" Bad IP value."); | |
| break; | |
| } | |
| if (i == 0) | |
| printk("(%02x) ", c); | |
| else | |
| printk("%02x ", c); | |
| } | |
| printk("\n"); | |
| } | |
| } | |
| void arch_enable_nmi(void) | |
| { | |
| unsigned long flags; | |
| local_save_flags(flags); | |
| flags |= (1 << 30); /* NMI M flag is at bit 30 */ | |
| local_irq_restore(flags); | |
| } | |
| extern void (*nmi_handler)(struct pt_regs *); | |
| void handle_nmi(struct pt_regs *regs) | |
| { | |
| #ifdef CONFIG_ETRAXFS | |
| reg_intr_vect_r_nmi r; | |
| #endif | |
| if (nmi_handler) | |
| nmi_handler(regs); | |
| #ifdef CONFIG_ETRAXFS | |
| /* Wait until nmi is no longer active. */ | |
| do { | |
| r = REG_RD(intr_vect, regi_irq, r_nmi); | |
| } while (r.ext == regk_intr_vect_on); | |
| #endif | |
| } | |
| #ifdef CONFIG_BUG | |
| extern void die_if_kernel(const char *str, struct pt_regs *regs, long err); | |
| /* Copy of the regs at BUG() time. */ | |
| struct pt_regs BUG_regs; | |
| void do_BUG(char *file, unsigned int line) | |
| { | |
| printk("kernel BUG at %s:%d!\n", file, line); | |
| die_if_kernel("Oops", &BUG_regs, 0); | |
| } | |
| EXPORT_SYMBOL(do_BUG); | |
| void fixup_BUG(struct pt_regs *regs) | |
| { | |
| BUG_regs = *regs; | |
| #ifdef CONFIG_DEBUG_BUGVERBOSE | |
| /* | |
| * Fixup the BUG arguments through exception handlers. | |
| */ | |
| { | |
| const struct exception_table_entry *fixup; | |
| /* | |
| * ERP points at the "break 14" + 2, compensate for the 2 | |
| * bytes. | |
| */ | |
| fixup = search_exception_tables(instruction_pointer(regs) - 2); | |
| if (fixup) { | |
| /* Adjust the instruction pointer in the stackframe. */ | |
| instruction_pointer(regs) = fixup->fixup; | |
| arch_fixup(regs); | |
| } | |
| } | |
| #else | |
| /* Dont try to lookup the filename + line, just dump regs. */ | |
| do_BUG("unknown", 0); | |
| #endif | |
| } | |
| /* | |
| * Break 14 handler. Save regs and jump into the fixup_BUG. | |
| */ | |
| __asm__ ( ".text\n\t" | |
| ".global breakh_BUG\n\t" | |
| "breakh_BUG:\n\t" | |
| SAVE_ALL | |
| KGDB_FIXUP | |
| "move.d $sp, $r10\n\t" | |
| "jsr fixup_BUG\n\t" | |
| "nop\n\t" | |
| "jump ret_from_intr\n\t" | |
| "nop\n\t"); | |
| #ifdef CONFIG_DEBUG_BUGVERBOSE | |
| void | |
| handle_BUG(struct pt_regs *regs) | |
| { | |
| } | |
| #endif | |
| #endif |