| /* | |
| * Signal handling | |
| * | |
| * Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu> | |
| * Copyright (C) 2008-2009 PetaLogix | |
| * Copyright (C) 2003,2004 John Williams <jwilliams@itee.uq.edu.au> | |
| * Copyright (C) 2001 NEC Corporation | |
| * Copyright (C) 2001 Miles Bader <miles@gnu.org> | |
| * Copyright (C) 1999,2000 Niibe Yutaka & Kaz Kojima | |
| * Copyright (C) 1991,1992 Linus Torvalds | |
| * | |
| * 1997-11-28 Modified for POSIX.1b signals by Richard Henderson | |
| * | |
| * This file was was derived from the sh version, arch/sh/kernel/signal.c | |
| * | |
| * This file is subject to the terms and conditions of the GNU General | |
| * Public License. See the file COPYING in the main directory of this | |
| * archive for more details. | |
| */ | |
| #include <linux/sched.h> | |
| #include <linux/mm.h> | |
| #include <linux/smp.h> | |
| #include <linux/kernel.h> | |
| #include <linux/signal.h> | |
| #include <linux/errno.h> | |
| #include <linux/wait.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/unistd.h> | |
| #include <linux/stddef.h> | |
| #include <linux/personality.h> | |
| #include <linux/percpu.h> | |
| #include <linux/linkage.h> | |
| #include <linux/tracehook.h> | |
| #include <asm/entry.h> | |
| #include <asm/ucontext.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/pgalloc.h> | |
| #include <linux/syscalls.h> | |
| #include <asm/cacheflush.h> | |
| #include <asm/syscalls.h> | |
| /* | |
| * Do a signal return; undo the signal stack. | |
| */ | |
| struct sigframe { | |
| struct sigcontext sc; | |
| unsigned long extramask[_NSIG_WORDS-1]; | |
| unsigned long tramp[2]; /* signal trampoline */ | |
| }; | |
| struct rt_sigframe { | |
| struct siginfo info; | |
| struct ucontext uc; | |
| unsigned long tramp[2]; /* signal trampoline */ | |
| }; | |
| static int restore_sigcontext(struct pt_regs *regs, | |
| struct sigcontext __user *sc, int *rval_p) | |
| { | |
| unsigned int err = 0; | |
| #define COPY(x) {err |= __get_user(regs->x, &sc->regs.x); } | |
| COPY(r0); | |
| COPY(r1); | |
| COPY(r2); COPY(r3); COPY(r4); COPY(r5); | |
| COPY(r6); COPY(r7); COPY(r8); COPY(r9); | |
| COPY(r10); COPY(r11); COPY(r12); COPY(r13); | |
| COPY(r14); COPY(r15); COPY(r16); COPY(r17); | |
| COPY(r18); COPY(r19); COPY(r20); COPY(r21); | |
| COPY(r22); COPY(r23); COPY(r24); COPY(r25); | |
| COPY(r26); COPY(r27); COPY(r28); COPY(r29); | |
| COPY(r30); COPY(r31); | |
| COPY(pc); COPY(ear); COPY(esr); COPY(fsr); | |
| #undef COPY | |
| *rval_p = regs->r3; | |
| return err; | |
| } | |
| asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) | |
| { | |
| struct rt_sigframe __user *frame = | |
| (struct rt_sigframe __user *)(regs->r1); | |
| sigset_t set; | |
| int rval; | |
| /* Always make any pending restarted system calls return -EINTR */ | |
| current->restart_block.fn = do_no_restart_syscall; | |
| if (!access_ok(VERIFY_READ, frame, sizeof(*frame))) | |
| goto badframe; | |
| if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set))) | |
| goto badframe; | |
| set_current_blocked(&set); | |
| if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &rval)) | |
| goto badframe; | |
| if (restore_altstack(&frame->uc.uc_stack)) | |
| goto badframe; | |
| return rval; | |
| badframe: | |
| force_sig(SIGSEGV, current); | |
| return 0; | |
| } | |
| /* | |
| * Set up a signal frame. | |
| */ | |
| static int | |
| setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, | |
| unsigned long mask) | |
| { | |
| int err = 0; | |
| #define COPY(x) {err |= __put_user(regs->x, &sc->regs.x); } | |
| COPY(r0); | |
| COPY(r1); | |
| COPY(r2); COPY(r3); COPY(r4); COPY(r5); | |
| COPY(r6); COPY(r7); COPY(r8); COPY(r9); | |
| COPY(r10); COPY(r11); COPY(r12); COPY(r13); | |
| COPY(r14); COPY(r15); COPY(r16); COPY(r17); | |
| COPY(r18); COPY(r19); COPY(r20); COPY(r21); | |
| COPY(r22); COPY(r23); COPY(r24); COPY(r25); | |
| COPY(r26); COPY(r27); COPY(r28); COPY(r29); | |
| COPY(r30); COPY(r31); | |
| COPY(pc); COPY(ear); COPY(esr); COPY(fsr); | |
| #undef COPY | |
| err |= __put_user(mask, &sc->oldmask); | |
| return err; | |
| } | |
| /* | |
| * Determine which stack to use.. | |
| */ | |
| static inline void __user * | |
| get_sigframe(struct ksignal *ksig, struct pt_regs *regs, size_t frame_size) | |
| { | |
| /* Default to using normal stack */ | |
| unsigned long sp = sigsp(regs->r1, ksig); | |
| return (void __user *)((sp - frame_size) & -8UL); | |
| } | |
| static int setup_rt_frame(struct ksignal *ksig, sigset_t *set, | |
| struct pt_regs *regs) | |
| { | |
| struct rt_sigframe __user *frame; | |
| int err = 0, sig = ksig->sig; | |
| unsigned long address = 0; | |
| #ifdef CONFIG_MMU | |
| pmd_t *pmdp; | |
| pte_t *ptep; | |
| #endif | |
| frame = get_sigframe(ksig, regs, sizeof(*frame)); | |
| if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) | |
| return -EFAULT; | |
| if (ksig->ka.sa.sa_flags & SA_SIGINFO) | |
| err |= copy_siginfo_to_user(&frame->info, &ksig->info); | |
| /* Create the ucontext. */ | |
| err |= __put_user(0, &frame->uc.uc_flags); | |
| err |= __put_user(NULL, &frame->uc.uc_link); | |
| err |= __save_altstack(&frame->uc.uc_stack, regs->r1); | |
| err |= setup_sigcontext(&frame->uc.uc_mcontext, | |
| regs, set->sig[0]); | |
| err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); | |
| /* Set up to return from userspace. If provided, use a stub | |
| already in userspace. */ | |
| /* minus 8 is offset to cater for "rtsd r15,8" */ | |
| /* addi r12, r0, __NR_sigreturn */ | |
| err |= __put_user(0x31800000 | __NR_rt_sigreturn , | |
| frame->tramp + 0); | |
| /* brki r14, 0x8 */ | |
| err |= __put_user(0xb9cc0008, frame->tramp + 1); | |
| /* Return from sighandler will jump to the tramp. | |
| Negative 8 offset because return is rtsd r15, 8 */ | |
| regs->r15 = ((unsigned long)frame->tramp)-8; | |
| address = ((unsigned long)frame->tramp); | |
| #ifdef CONFIG_MMU | |
| pmdp = pmd_offset(pud_offset( | |
| pgd_offset(current->mm, address), | |
| address), address); | |
| preempt_disable(); | |
| ptep = pte_offset_map(pmdp, address); | |
| if (pte_present(*ptep)) { | |
| address = (unsigned long) page_address(pte_page(*ptep)); | |
| /* MS: I need add offset in page */ | |
| address += ((unsigned long)frame->tramp) & ~PAGE_MASK; | |
| /* MS address is virtual */ | |
| address = __virt_to_phys(address); | |
| invalidate_icache_range(address, address + 8); | |
| flush_dcache_range(address, address + 8); | |
| } | |
| pte_unmap(ptep); | |
| preempt_enable(); | |
| #else | |
| flush_icache_range(address, address + 8); | |
| flush_dcache_range(address, address + 8); | |
| #endif | |
| if (err) | |
| return -EFAULT; | |
| /* Set up registers for signal handler */ | |
| regs->r1 = (unsigned long) frame; | |
| /* Signal handler args: */ | |
| regs->r5 = sig; /* arg 0: signum */ | |
| regs->r6 = (unsigned long) &frame->info; /* arg 1: siginfo */ | |
| regs->r7 = (unsigned long) &frame->uc; /* arg2: ucontext */ | |
| /* Offset to handle microblaze rtid r14, 0 */ | |
| regs->pc = (unsigned long)ksig->ka.sa.sa_handler; | |
| #ifdef DEBUG_SIG | |
| pr_info("SIG deliver (%s:%d): sp=%p pc=%08lx\n", | |
| current->comm, current->pid, frame, regs->pc); | |
| #endif | |
| return 0; | |
| } | |
| /* Handle restarting system calls */ | |
| static inline void | |
| handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) | |
| { | |
| switch (regs->r3) { | |
| case -ERESTART_RESTARTBLOCK: | |
| case -ERESTARTNOHAND: | |
| if (!has_handler) | |
| goto do_restart; | |
| regs->r3 = -EINTR; | |
| break; | |
| case -ERESTARTSYS: | |
| if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) { | |
| regs->r3 = -EINTR; | |
| break; | |
| } | |
| /* fallthrough */ | |
| case -ERESTARTNOINTR: | |
| do_restart: | |
| /* offset of 4 bytes to re-execute trap (brki) instruction */ | |
| regs->pc -= 4; | |
| break; | |
| } | |
| } | |
| /* | |
| * OK, we're invoking a handler | |
| */ | |
| static void | |
| handle_signal(struct ksignal *ksig, struct pt_regs *regs) | |
| { | |
| sigset_t *oldset = sigmask_to_save(); | |
| int ret; | |
| /* Set up the stack frame */ | |
| ret = setup_rt_frame(ksig, oldset, regs); | |
| signal_setup_done(ret, ksig, test_thread_flag(TIF_SINGLESTEP)); | |
| } | |
| /* | |
| * Note that 'init' is a special process: it doesn't get signals it doesn't | |
| * want to handle. Thus you cannot kill init even with a SIGKILL even by | |
| * mistake. | |
| * | |
| * Note that we go through the signals twice: once to check the signals that | |
| * the kernel can handle, and then we build all the user-level signal handling | |
| * stack-frames in one go after that. | |
| */ | |
| static void do_signal(struct pt_regs *regs, int in_syscall) | |
| { | |
| struct ksignal ksig; | |
| #ifdef DEBUG_SIG | |
| pr_info("do signal: %p %d\n", regs, in_syscall); | |
| pr_info("do signal2: %lx %lx %ld [%lx]\n", regs->pc, regs->r1, | |
| regs->r12, current_thread_info()->flags); | |
| #endif | |
| if (get_signal(&ksig)) { | |
| /* Whee! Actually deliver the signal. */ | |
| if (in_syscall) | |
| handle_restart(regs, &ksig.ka, 1); | |
| handle_signal(&ksig, regs); | |
| return; | |
| } | |
| if (in_syscall) | |
| handle_restart(regs, NULL, 0); | |
| /* | |
| * If there's no signal to deliver, we just put the saved sigmask | |
| * back. | |
| */ | |
| restore_saved_sigmask(); | |
| } | |
| asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall) | |
| { | |
| if (test_thread_flag(TIF_SIGPENDING)) | |
| do_signal(regs, in_syscall); | |
| if (test_and_clear_thread_flag(TIF_NOTIFY_RESUME)) | |
| tracehook_notify_resume(regs); | |
| } |