| /* | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| * | |
| * Copyright (C) 1995 - 1998 by Andreas Busse and Ralf Baechle | |
| */ | |
| #ifndef __ASM_JAZZ_H | |
| #define __ASM_JAZZ_H | |
| /* | |
| * The addresses below are virtual address. The mappings are | |
| * created on startup via wired entries in the tlb. The Mips | |
| * Magnum R3000 and R4000 machines are similar in many aspects, | |
| * but many hardware register are accessible at 0xb9000000 in | |
| * instead of 0xe0000000. | |
| */ | |
| #define JAZZ_LOCAL_IO_SPACE 0xe0000000 | |
| /* | |
| * Revision numbers in PICA_ASIC_REVISION | |
| * | |
| * 0xf0000000 - Rev1 | |
| * 0xf0000001 - Rev2 | |
| * 0xf0000002 - Rev3 | |
| */ | |
| #define PICA_ASIC_REVISION 0xe0000008 | |
| /* | |
| * The segments of the seven segment LED are mapped | |
| * to the control bits as follows: | |
| * | |
| * (7) | |
| * --------- | |
| * | | | |
| * (2) | | (6) | |
| * | (1) | | |
| * --------- | |
| * | | | |
| * (3) | | (5) | |
| * | (4) | | |
| * --------- . (0) | |
| */ | |
| #define PICA_LED 0xe000f000 | |
| /* | |
| * Some characters for the LED control registers | |
| * The original Mips machines seem to have a LED display | |
| * with integrated decoder while the Acer machines can | |
| * control each of the seven segments and the dot independently. | |
| * It's only a toy, anyway... | |
| */ | |
| #define LED_DOT 0x01 | |
| #define LED_SPACE 0x00 | |
| #define LED_0 0xfc | |
| #define LED_1 0x60 | |
| #define LED_2 0xda | |
| #define LED_3 0xf2 | |
| #define LED_4 0x66 | |
| #define LED_5 0xb6 | |
| #define LED_6 0xbe | |
| #define LED_7 0xe0 | |
| #define LED_8 0xfe | |
| #define LED_9 0xf6 | |
| #define LED_A 0xee | |
| #define LED_b 0x3e | |
| #define LED_C 0x9c | |
| #define LED_d 0x7a | |
| #define LED_E 0x9e | |
| #define LED_F 0x8e | |
| #ifndef __ASSEMBLY__ | |
| static __inline__ void pica_set_led(unsigned int bits) | |
| { | |
| volatile unsigned int *led_register = (unsigned int *) PICA_LED; | |
| *led_register = bits; | |
| } | |
| #endif /* !__ASSEMBLY__ */ | |
| /* | |
| * Base address of the Sonic Ethernet adapter in Jazz machines. | |
| */ | |
| #define JAZZ_ETHERNET_BASE 0xe0001000 | |
| /* | |
| * Base address of the 53C94 SCSI hostadapter in Jazz machines. | |
| */ | |
| #define JAZZ_SCSI_BASE 0xe0002000 | |
| /* | |
| * i8042 keyboard controller for JAZZ and PICA chipsets. | |
| * This address is just a guess and seems to differ from | |
| * other mips machines such as RC3xxx... | |
| */ | |
| #define JAZZ_KEYBOARD_ADDRESS 0xe0005000 | |
| #define JAZZ_KEYBOARD_DATA 0xe0005000 | |
| #define JAZZ_KEYBOARD_COMMAND 0xe0005001 | |
| #ifndef __ASSEMBLY__ | |
| typedef struct { | |
| unsigned char data; | |
| unsigned char command; | |
| } jazz_keyboard_hardware; | |
| #define jazz_kh ((keyboard_hardware *) JAZZ_KEYBOARD_ADDRESS) | |
| typedef struct { | |
| unsigned char pad0[3]; | |
| unsigned char data; | |
| unsigned char pad1[3]; | |
| unsigned char command; | |
| } mips_keyboard_hardware; | |
| /* | |
| * For now. Needs to be changed for RC3xxx support. See below. | |
| */ | |
| #define keyboard_hardware jazz_keyboard_hardware | |
| #endif /* !__ASSEMBLY__ */ | |
| /* | |
| * i8042 keyboard controller for most other Mips machines. | |
| */ | |
| #define MIPS_KEYBOARD_ADDRESS 0xb9005000 | |
| #define MIPS_KEYBOARD_DATA 0xb9005003 | |
| #define MIPS_KEYBOARD_COMMAND 0xb9005007 | |
| /* | |
| * Serial and parallel ports (WD 16C552) on the Mips JAZZ | |
| */ | |
| #define JAZZ_SERIAL1_BASE (unsigned int)0xe0006000 | |
| #define JAZZ_SERIAL2_BASE (unsigned int)0xe0007000 | |
| #define JAZZ_PARALLEL_BASE (unsigned int)0xe0008000 | |
| /* | |
| * Dummy Device Address. Used in jazzdma.c | |
| */ | |
| #define JAZZ_DUMMY_DEVICE 0xe000d000 | |
| /* | |
| * JAZZ timer registers and interrupt no. | |
| * Note that the hardware timer interrupt is actually on | |
| * cpu level 6, but to keep compatibility with PC stuff | |
| * it is remapped to vector 0. See arch/mips/kernel/entry.S. | |
| */ | |
| #define JAZZ_TIMER_INTERVAL 0xe0000228 | |
| #define JAZZ_TIMER_REGISTER 0xe0000230 | |
| /* | |
| * DRAM configuration register | |
| */ | |
| #ifndef __ASSEMBLY__ | |
| #ifdef __MIPSEL__ | |
| typedef struct { | |
| unsigned int bank2 : 3; | |
| unsigned int bank1 : 3; | |
| unsigned int mem_bus_width : 1; | |
| unsigned int reserved2 : 1; | |
| unsigned int page_mode : 1; | |
| unsigned int reserved1 : 23; | |
| } dram_configuration; | |
| #else /* defined (__MIPSEB__) */ | |
| typedef struct { | |
| unsigned int reserved1 : 23; | |
| unsigned int page_mode : 1; | |
| unsigned int reserved2 : 1; | |
| unsigned int mem_bus_width : 1; | |
| unsigned int bank1 : 3; | |
| unsigned int bank2 : 3; | |
| } dram_configuration; | |
| #endif | |
| #endif /* !__ASSEMBLY__ */ | |
| #define PICA_DRAM_CONFIG 0xe00fffe0 | |
| /* | |
| * JAZZ interrupt control registers | |
| */ | |
| #define JAZZ_IO_IRQ_SOURCE 0xe0010000 | |
| #define JAZZ_IO_IRQ_ENABLE 0xe0010002 | |
| /* | |
| * JAZZ Interrupt Level definitions | |
| * | |
| * This is somewhat broken. For reasons which nobody can remember anymore | |
| * we remap the Jazz interrupts to the usual ISA style interrupt numbers. | |
| */ | |
| #define JAZZ_IRQ_START 24 | |
| #define JAZZ_IRQ_END (24 + 9) | |
| #define JAZZ_PARALLEL_IRQ (JAZZ_IRQ_START + 0) | |
| #define JAZZ_FLOPPY_IRQ (JAZZ_IRQ_START + 1) | |
| #define JAZZ_SOUND_IRQ (JAZZ_IRQ_START + 2) | |
| #define JAZZ_VIDEO_IRQ (JAZZ_IRQ_START + 3) | |
| #define JAZZ_ETHERNET_IRQ (JAZZ_IRQ_START + 4) | |
| #define JAZZ_SCSI_IRQ (JAZZ_IRQ_START + 5) | |
| #define JAZZ_KEYBOARD_IRQ (JAZZ_IRQ_START + 6) | |
| #define JAZZ_MOUSE_IRQ (JAZZ_IRQ_START + 7) | |
| #define JAZZ_SERIAL1_IRQ (JAZZ_IRQ_START + 8) | |
| #define JAZZ_SERIAL2_IRQ (JAZZ_IRQ_START + 9) | |
| #define JAZZ_TIMER_IRQ (MIPS_CPU_IRQ_BASE+6) | |
| /* | |
| * JAZZ DMA Channels | |
| * Note: Channels 4...7 are not used with respect to the Acer PICA-61 | |
| * chipset which does not provide these DMA channels. | |
| */ | |
| #define JAZZ_SCSI_DMA 0 /* SCSI */ | |
| #define JAZZ_FLOPPY_DMA 1 /* FLOPPY */ | |
| #define JAZZ_AUDIOL_DMA 2 /* AUDIO L */ | |
| #define JAZZ_AUDIOR_DMA 3 /* AUDIO R */ | |
| /* | |
| * JAZZ R4030 MCT_ADR chip (DMA controller) | |
| * Note: Virtual Addresses ! | |
| */ | |
| #define JAZZ_R4030_CONFIG 0xE0000000 /* R4030 config register */ | |
| #define JAZZ_R4030_REVISION 0xE0000008 /* same as PICA_ASIC_REVISION */ | |
| #define JAZZ_R4030_INV_ADDR 0xE0000010 /* Invalid Address register */ | |
| #define JAZZ_R4030_TRSTBL_BASE 0xE0000018 /* Translation Table Base */ | |
| #define JAZZ_R4030_TRSTBL_LIM 0xE0000020 /* Translation Table Limit */ | |
| #define JAZZ_R4030_TRSTBL_INV 0xE0000028 /* Translation Table Invalidate */ | |
| #define JAZZ_R4030_CACHE_MTNC 0xE0000030 /* Cache Maintenance */ | |
| #define JAZZ_R4030_R_FAIL_ADDR 0xE0000038 /* Remote Failed Address */ | |
| #define JAZZ_R4030_M_FAIL_ADDR 0xE0000040 /* Memory Failed Address */ | |
| #define JAZZ_R4030_CACHE_PTAG 0xE0000048 /* I/O Cache Physical Tag */ | |
| #define JAZZ_R4030_CACHE_LTAG 0xE0000050 /* I/O Cache Logical Tag */ | |
| #define JAZZ_R4030_CACHE_BMASK 0xE0000058 /* I/O Cache Byte Mask */ | |
| #define JAZZ_R4030_CACHE_BWIN 0xE0000060 /* I/O Cache Buffer Window */ | |
| /* | |
| * Remote Speed Registers. | |
| * | |
| * 0: free, 1: Ethernet, 2: SCSI, 3: Floppy, | |
| * 4: RTC, 5: Kb./Mouse 6: serial 1, 7: serial 2, | |
| * 8: parallel, 9: NVRAM, 10: CPU, 11: PROM, | |
| * 12: reserved, 13: free, 14: 7seg LED, 15: ??? | |
| */ | |
| #define JAZZ_R4030_REM_SPEED 0xE0000070 /* 16 Remote Speed Registers */ | |
| /* 0xE0000070,78,80... 0xE00000E8 */ | |
| #define JAZZ_R4030_IRQ_ENABLE 0xE00000E8 /* Internal Interrupt Enable */ | |
| #define JAZZ_R4030_INVAL_ADDR 0xE0000010 /* Invalid address Register */ | |
| #define JAZZ_R4030_IRQ_SOURCE 0xE0000200 /* Interrupt Source Register */ | |
| #define JAZZ_R4030_I386_ERROR 0xE0000208 /* i386/EISA Bus Error */ | |
| /* | |
| * Virtual (E)ISA controller address | |
| */ | |
| #define JAZZ_EISA_IRQ_ACK 0xE0000238 /* EISA interrupt acknowledge */ | |
| /* | |
| * Access the R4030 DMA and I/O Controller | |
| */ | |
| #ifndef __ASSEMBLY__ | |
| static inline void r4030_delay(void) | |
| { | |
| __asm__ __volatile__( | |
| ".set\tnoreorder\n\t" | |
| "nop\n\t" | |
| "nop\n\t" | |
| "nop\n\t" | |
| "nop\n\t" | |
| ".set\treorder"); | |
| } | |
| static inline unsigned short r4030_read_reg16(unsigned long addr) | |
| { | |
| unsigned short ret = *((volatile unsigned short *)addr); | |
| r4030_delay(); | |
| return ret; | |
| } | |
| static inline unsigned int r4030_read_reg32(unsigned long addr) | |
| { | |
| unsigned int ret = *((volatile unsigned int *)addr); | |
| r4030_delay(); | |
| return ret; | |
| } | |
| static inline void r4030_write_reg16(unsigned long addr, unsigned val) | |
| { | |
| *((volatile unsigned short *)addr) = val; | |
| r4030_delay(); | |
| } | |
| static inline void r4030_write_reg32(unsigned long addr, unsigned val) | |
| { | |
| *((volatile unsigned int *)addr) = val; | |
| r4030_delay(); | |
| } | |
| #endif /* !__ASSEMBLY__ */ | |
| #define JAZZ_FDC_BASE 0xe0003000 | |
| #define JAZZ_RTC_BASE 0xe0004000 | |
| #define JAZZ_PORT_BASE 0xe2000000 | |
| #define JAZZ_EISA_BASE 0xe3000000 | |
| #endif /* __ASM_JAZZ_H */ |