| /* | |
| * Linux performance counter support for MIPS. | |
| * | |
| * Copyright (C) 2010 MIPS Technologies, Inc. | |
| * Copyright (C) 2011 Cavium Networks, Inc. | |
| * Author: Deng-Cheng Zhu | |
| * | |
| * This code is based on the implementation for ARM, which is in turn | |
| * based on the sparc64 perf event code and the x86 code. Performance | |
| * counter access is based on the MIPS Oprofile code. And the callchain | |
| * support references the code of MIPS stacktrace.c. | |
| * | |
| * This program is free software; you can redistribute it and/or modify | |
| * it under the terms of the GNU General Public License version 2 as | |
| * published by the Free Software Foundation. | |
| */ | |
| #include <linux/cpumask.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/smp.h> | |
| #include <linux/kernel.h> | |
| #include <linux/perf_event.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/irq.h> | |
| #include <asm/irq_regs.h> | |
| #include <asm/stacktrace.h> | |
| #include <asm/time.h> /* For perf_irq */ | |
| #define MIPS_MAX_HWEVENTS 4 | |
| #define MIPS_TCS_PER_COUNTER 2 | |
| #define MIPS_CPUID_TO_COUNTER_MASK (MIPS_TCS_PER_COUNTER - 1) | |
| struct cpu_hw_events { | |
| /* Array of events on this cpu. */ | |
| struct perf_event *events[MIPS_MAX_HWEVENTS]; | |
| /* | |
| * Set the bit (indexed by the counter number) when the counter | |
| * is used for an event. | |
| */ | |
| unsigned long used_mask[BITS_TO_LONGS(MIPS_MAX_HWEVENTS)]; | |
| /* | |
| * Software copy of the control register for each performance counter. | |
| * MIPS CPUs vary in performance counters. They use this differently, | |
| * and even may not use it. | |
| */ | |
| unsigned int saved_ctrl[MIPS_MAX_HWEVENTS]; | |
| }; | |
| DEFINE_PER_CPU(struct cpu_hw_events, cpu_hw_events) = { | |
| .saved_ctrl = {0}, | |
| }; | |
| /* The description of MIPS performance events. */ | |
| struct mips_perf_event { | |
| unsigned int event_id; | |
| /* | |
| * MIPS performance counters are indexed starting from 0. | |
| * CNTR_EVEN indicates the indexes of the counters to be used are | |
| * even numbers. | |
| */ | |
| unsigned int cntr_mask; | |
| #define CNTR_EVEN 0x55555555 | |
| #define CNTR_ODD 0xaaaaaaaa | |
| #define CNTR_ALL 0xffffffff | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| enum { | |
| T = 0, | |
| V = 1, | |
| P = 2, | |
| } range; | |
| #else | |
| #define T | |
| #define V | |
| #define P | |
| #endif | |
| }; | |
| static struct mips_perf_event raw_event; | |
| static DEFINE_MUTEX(raw_event_mutex); | |
| #define C(x) PERF_COUNT_HW_CACHE_##x | |
| struct mips_pmu { | |
| u64 max_period; | |
| u64 valid_count; | |
| u64 overflow; | |
| const char *name; | |
| int irq; | |
| u64 (*read_counter)(unsigned int idx); | |
| void (*write_counter)(unsigned int idx, u64 val); | |
| const struct mips_perf_event *(*map_raw_event)(u64 config); | |
| const struct mips_perf_event (*general_event_map)[PERF_COUNT_HW_MAX]; | |
| const struct mips_perf_event (*cache_event_map) | |
| [PERF_COUNT_HW_CACHE_MAX] | |
| [PERF_COUNT_HW_CACHE_OP_MAX] | |
| [PERF_COUNT_HW_CACHE_RESULT_MAX]; | |
| unsigned int num_counters; | |
| }; | |
| static struct mips_pmu mipspmu; | |
| #define M_PERFCTL_EXL (1 << 0) | |
| #define M_PERFCTL_KERNEL (1 << 1) | |
| #define M_PERFCTL_SUPERVISOR (1 << 2) | |
| #define M_PERFCTL_USER (1 << 3) | |
| #define M_PERFCTL_INTERRUPT_ENABLE (1 << 4) | |
| #define M_PERFCTL_EVENT(event) (((event) & 0x3ff) << 5) | |
| #define M_PERFCTL_VPEID(vpe) ((vpe) << 16) | |
| #ifdef CONFIG_CPU_BMIPS5000 | |
| #define M_PERFCTL_MT_EN(filter) 0 | |
| #else /* !CONFIG_CPU_BMIPS5000 */ | |
| #define M_PERFCTL_MT_EN(filter) ((filter) << 20) | |
| #endif /* CONFIG_CPU_BMIPS5000 */ | |
| #define M_TC_EN_ALL M_PERFCTL_MT_EN(0) | |
| #define M_TC_EN_VPE M_PERFCTL_MT_EN(1) | |
| #define M_TC_EN_TC M_PERFCTL_MT_EN(2) | |
| #define M_PERFCTL_TCID(tcid) ((tcid) << 22) | |
| #define M_PERFCTL_WIDE (1 << 30) | |
| #define M_PERFCTL_MORE (1 << 31) | |
| #define M_PERFCTL_TC (1 << 30) | |
| #define M_PERFCTL_COUNT_EVENT_WHENEVER (M_PERFCTL_EXL | \ | |
| M_PERFCTL_KERNEL | \ | |
| M_PERFCTL_USER | \ | |
| M_PERFCTL_SUPERVISOR | \ | |
| M_PERFCTL_INTERRUPT_ENABLE) | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| #define M_PERFCTL_CONFIG_MASK 0x3fff801f | |
| #else | |
| #define M_PERFCTL_CONFIG_MASK 0x1f | |
| #endif | |
| #define M_PERFCTL_EVENT_MASK 0xfe0 | |
| #ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS | |
| static int cpu_has_mipsmt_pertccounters; | |
| static DEFINE_RWLOCK(pmuint_rwlock); | |
| #if defined(CONFIG_CPU_BMIPS5000) | |
| #define vpe_id() (cpu_has_mipsmt_pertccounters ? \ | |
| 0 : (smp_processor_id() & MIPS_CPUID_TO_COUNTER_MASK)) | |
| #else | |
| /* | |
| * FIXME: For VSMP, vpe_id() is redefined for Perf-events, because | |
| * cpu_data[cpuid].vpe_id reports 0 for _both_ CPUs. | |
| */ | |
| #define vpe_id() (cpu_has_mipsmt_pertccounters ? \ | |
| 0 : smp_processor_id()) | |
| #endif | |
| /* Copied from op_model_mipsxx.c */ | |
| static unsigned int vpe_shift(void) | |
| { | |
| if (num_possible_cpus() > 1) | |
| return 1; | |
| return 0; | |
| } | |
| static unsigned int counters_total_to_per_cpu(unsigned int counters) | |
| { | |
| return counters >> vpe_shift(); | |
| } | |
| #else /* !CONFIG_MIPS_PERF_SHARED_TC_COUNTERS */ | |
| #define vpe_id() 0 | |
| #endif /* CONFIG_MIPS_PERF_SHARED_TC_COUNTERS */ | |
| static void resume_local_counters(void); | |
| static void pause_local_counters(void); | |
| static irqreturn_t mipsxx_pmu_handle_irq(int, void *); | |
| static int mipsxx_pmu_handle_shared_irq(void); | |
| static unsigned int mipsxx_pmu_swizzle_perf_idx(unsigned int idx) | |
| { | |
| if (vpe_id() == 1) | |
| idx = (idx + 2) & 3; | |
| return idx; | |
| } | |
| static u64 mipsxx_pmu_read_counter(unsigned int idx) | |
| { | |
| idx = mipsxx_pmu_swizzle_perf_idx(idx); | |
| switch (idx) { | |
| case 0: | |
| /* | |
| * The counters are unsigned, we must cast to truncate | |
| * off the high bits. | |
| */ | |
| return (u32)read_c0_perfcntr0(); | |
| case 1: | |
| return (u32)read_c0_perfcntr1(); | |
| case 2: | |
| return (u32)read_c0_perfcntr2(); | |
| case 3: | |
| return (u32)read_c0_perfcntr3(); | |
| default: | |
| WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx); | |
| return 0; | |
| } | |
| } | |
| static u64 mipsxx_pmu_read_counter_64(unsigned int idx) | |
| { | |
| idx = mipsxx_pmu_swizzle_perf_idx(idx); | |
| switch (idx) { | |
| case 0: | |
| return read_c0_perfcntr0_64(); | |
| case 1: | |
| return read_c0_perfcntr1_64(); | |
| case 2: | |
| return read_c0_perfcntr2_64(); | |
| case 3: | |
| return read_c0_perfcntr3_64(); | |
| default: | |
| WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx); | |
| return 0; | |
| } | |
| } | |
| static void mipsxx_pmu_write_counter(unsigned int idx, u64 val) | |
| { | |
| idx = mipsxx_pmu_swizzle_perf_idx(idx); | |
| switch (idx) { | |
| case 0: | |
| write_c0_perfcntr0(val); | |
| return; | |
| case 1: | |
| write_c0_perfcntr1(val); | |
| return; | |
| case 2: | |
| write_c0_perfcntr2(val); | |
| return; | |
| case 3: | |
| write_c0_perfcntr3(val); | |
| return; | |
| } | |
| } | |
| static void mipsxx_pmu_write_counter_64(unsigned int idx, u64 val) | |
| { | |
| idx = mipsxx_pmu_swizzle_perf_idx(idx); | |
| switch (idx) { | |
| case 0: | |
| write_c0_perfcntr0_64(val); | |
| return; | |
| case 1: | |
| write_c0_perfcntr1_64(val); | |
| return; | |
| case 2: | |
| write_c0_perfcntr2_64(val); | |
| return; | |
| case 3: | |
| write_c0_perfcntr3_64(val); | |
| return; | |
| } | |
| } | |
| static unsigned int mipsxx_pmu_read_control(unsigned int idx) | |
| { | |
| idx = mipsxx_pmu_swizzle_perf_idx(idx); | |
| switch (idx) { | |
| case 0: | |
| return read_c0_perfctrl0(); | |
| case 1: | |
| return read_c0_perfctrl1(); | |
| case 2: | |
| return read_c0_perfctrl2(); | |
| case 3: | |
| return read_c0_perfctrl3(); | |
| default: | |
| WARN_ONCE(1, "Invalid performance counter number (%d)\n", idx); | |
| return 0; | |
| } | |
| } | |
| static void mipsxx_pmu_write_control(unsigned int idx, unsigned int val) | |
| { | |
| idx = mipsxx_pmu_swizzle_perf_idx(idx); | |
| switch (idx) { | |
| case 0: | |
| write_c0_perfctrl0(val); | |
| return; | |
| case 1: | |
| write_c0_perfctrl1(val); | |
| return; | |
| case 2: | |
| write_c0_perfctrl2(val); | |
| return; | |
| case 3: | |
| write_c0_perfctrl3(val); | |
| return; | |
| } | |
| } | |
| static int mipsxx_pmu_alloc_counter(struct cpu_hw_events *cpuc, | |
| struct hw_perf_event *hwc) | |
| { | |
| int i; | |
| /* | |
| * We only need to care the counter mask. The range has been | |
| * checked definitely. | |
| */ | |
| unsigned long cntr_mask = (hwc->event_base >> 8) & 0xffff; | |
| for (i = mipspmu.num_counters - 1; i >= 0; i--) { | |
| /* | |
| * Note that some MIPS perf events can be counted by both | |
| * even and odd counters, wheresas many other are only by | |
| * even _or_ odd counters. This introduces an issue that | |
| * when the former kind of event takes the counter the | |
| * latter kind of event wants to use, then the "counter | |
| * allocation" for the latter event will fail. In fact if | |
| * they can be dynamically swapped, they both feel happy. | |
| * But here we leave this issue alone for now. | |
| */ | |
| if (test_bit(i, &cntr_mask) && | |
| !test_and_set_bit(i, cpuc->used_mask)) | |
| return i; | |
| } | |
| return -EAGAIN; | |
| } | |
| static void mipsxx_pmu_enable_event(struct hw_perf_event *evt, int idx) | |
| { | |
| struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); | |
| WARN_ON(idx < 0 || idx >= mipspmu.num_counters); | |
| cpuc->saved_ctrl[idx] = M_PERFCTL_EVENT(evt->event_base & 0xff) | | |
| (evt->config_base & M_PERFCTL_CONFIG_MASK) | | |
| /* Make sure interrupt enabled. */ | |
| M_PERFCTL_INTERRUPT_ENABLE; | |
| if (IS_ENABLED(CONFIG_CPU_BMIPS5000)) | |
| /* enable the counter for the calling thread */ | |
| cpuc->saved_ctrl[idx] |= | |
| (1 << (12 + vpe_id())) | M_PERFCTL_TC; | |
| /* | |
| * We do not actually let the counter run. Leave it until start(). | |
| */ | |
| } | |
| static void mipsxx_pmu_disable_event(int idx) | |
| { | |
| struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); | |
| unsigned long flags; | |
| WARN_ON(idx < 0 || idx >= mipspmu.num_counters); | |
| local_irq_save(flags); | |
| cpuc->saved_ctrl[idx] = mipsxx_pmu_read_control(idx) & | |
| ~M_PERFCTL_COUNT_EVENT_WHENEVER; | |
| mipsxx_pmu_write_control(idx, cpuc->saved_ctrl[idx]); | |
| local_irq_restore(flags); | |
| } | |
| static int mipspmu_event_set_period(struct perf_event *event, | |
| struct hw_perf_event *hwc, | |
| int idx) | |
| { | |
| u64 left = local64_read(&hwc->period_left); | |
| u64 period = hwc->sample_period; | |
| int ret = 0; | |
| if (unlikely((left + period) & (1ULL << 63))) { | |
| /* left underflowed by more than period. */ | |
| left = period; | |
| local64_set(&hwc->period_left, left); | |
| hwc->last_period = period; | |
| ret = 1; | |
| } else if (unlikely((left + period) <= period)) { | |
| /* left underflowed by less than period. */ | |
| left += period; | |
| local64_set(&hwc->period_left, left); | |
| hwc->last_period = period; | |
| ret = 1; | |
| } | |
| if (left > mipspmu.max_period) { | |
| left = mipspmu.max_period; | |
| local64_set(&hwc->period_left, left); | |
| } | |
| local64_set(&hwc->prev_count, mipspmu.overflow - left); | |
| mipspmu.write_counter(idx, mipspmu.overflow - left); | |
| perf_event_update_userpage(event); | |
| return ret; | |
| } | |
| static void mipspmu_event_update(struct perf_event *event, | |
| struct hw_perf_event *hwc, | |
| int idx) | |
| { | |
| u64 prev_raw_count, new_raw_count; | |
| u64 delta; | |
| again: | |
| prev_raw_count = local64_read(&hwc->prev_count); | |
| new_raw_count = mipspmu.read_counter(idx); | |
| if (local64_cmpxchg(&hwc->prev_count, prev_raw_count, | |
| new_raw_count) != prev_raw_count) | |
| goto again; | |
| delta = new_raw_count - prev_raw_count; | |
| local64_add(delta, &event->count); | |
| local64_sub(delta, &hwc->period_left); | |
| } | |
| static void mipspmu_start(struct perf_event *event, int flags) | |
| { | |
| struct hw_perf_event *hwc = &event->hw; | |
| if (flags & PERF_EF_RELOAD) | |
| WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE)); | |
| hwc->state = 0; | |
| /* Set the period for the event. */ | |
| mipspmu_event_set_period(event, hwc, hwc->idx); | |
| /* Enable the event. */ | |
| mipsxx_pmu_enable_event(hwc, hwc->idx); | |
| } | |
| static void mipspmu_stop(struct perf_event *event, int flags) | |
| { | |
| struct hw_perf_event *hwc = &event->hw; | |
| if (!(hwc->state & PERF_HES_STOPPED)) { | |
| /* We are working on a local event. */ | |
| mipsxx_pmu_disable_event(hwc->idx); | |
| barrier(); | |
| mipspmu_event_update(event, hwc, hwc->idx); | |
| hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; | |
| } | |
| } | |
| static int mipspmu_add(struct perf_event *event, int flags) | |
| { | |
| struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); | |
| struct hw_perf_event *hwc = &event->hw; | |
| int idx; | |
| int err = 0; | |
| perf_pmu_disable(event->pmu); | |
| /* To look for a free counter for this event. */ | |
| idx = mipsxx_pmu_alloc_counter(cpuc, hwc); | |
| if (idx < 0) { | |
| err = idx; | |
| goto out; | |
| } | |
| /* | |
| * If there is an event in the counter we are going to use then | |
| * make sure it is disabled. | |
| */ | |
| event->hw.idx = idx; | |
| mipsxx_pmu_disable_event(idx); | |
| cpuc->events[idx] = event; | |
| hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE; | |
| if (flags & PERF_EF_START) | |
| mipspmu_start(event, PERF_EF_RELOAD); | |
| /* Propagate our changes to the userspace mapping. */ | |
| perf_event_update_userpage(event); | |
| out: | |
| perf_pmu_enable(event->pmu); | |
| return err; | |
| } | |
| static void mipspmu_del(struct perf_event *event, int flags) | |
| { | |
| struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); | |
| struct hw_perf_event *hwc = &event->hw; | |
| int idx = hwc->idx; | |
| WARN_ON(idx < 0 || idx >= mipspmu.num_counters); | |
| mipspmu_stop(event, PERF_EF_UPDATE); | |
| cpuc->events[idx] = NULL; | |
| clear_bit(idx, cpuc->used_mask); | |
| perf_event_update_userpage(event); | |
| } | |
| static void mipspmu_read(struct perf_event *event) | |
| { | |
| struct hw_perf_event *hwc = &event->hw; | |
| /* Don't read disabled counters! */ | |
| if (hwc->idx < 0) | |
| return; | |
| mipspmu_event_update(event, hwc, hwc->idx); | |
| } | |
| static void mipspmu_enable(struct pmu *pmu) | |
| { | |
| #ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS | |
| write_unlock(&pmuint_rwlock); | |
| #endif | |
| resume_local_counters(); | |
| } | |
| /* | |
| * MIPS performance counters can be per-TC. The control registers can | |
| * not be directly accessed across CPUs. Hence if we want to do global | |
| * control, we need cross CPU calls. on_each_cpu() can help us, but we | |
| * can not make sure this function is called with interrupts enabled. So | |
| * here we pause local counters and then grab a rwlock and leave the | |
| * counters on other CPUs alone. If any counter interrupt raises while | |
| * we own the write lock, simply pause local counters on that CPU and | |
| * spin in the handler. Also we know we won't be switched to another | |
| * CPU after pausing local counters and before grabbing the lock. | |
| */ | |
| static void mipspmu_disable(struct pmu *pmu) | |
| { | |
| pause_local_counters(); | |
| #ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS | |
| write_lock(&pmuint_rwlock); | |
| #endif | |
| } | |
| static atomic_t active_events = ATOMIC_INIT(0); | |
| static DEFINE_MUTEX(pmu_reserve_mutex); | |
| static int (*save_perf_irq)(void); | |
| static int mipspmu_get_irq(void) | |
| { | |
| int err; | |
| if (mipspmu.irq >= 0) { | |
| /* Request my own irq handler. */ | |
| err = request_irq(mipspmu.irq, mipsxx_pmu_handle_irq, | |
| IRQF_PERCPU | IRQF_NOBALANCING | | |
| IRQF_NO_THREAD | IRQF_NO_SUSPEND | | |
| IRQF_SHARED, | |
| "mips_perf_pmu", &mipspmu); | |
| if (err) { | |
| pr_warn("Unable to request IRQ%d for MIPS performance counters!\n", | |
| mipspmu.irq); | |
| } | |
| } else if (cp0_perfcount_irq < 0) { | |
| /* | |
| * We are sharing the irq number with the timer interrupt. | |
| */ | |
| save_perf_irq = perf_irq; | |
| perf_irq = mipsxx_pmu_handle_shared_irq; | |
| err = 0; | |
| } else { | |
| pr_warn("The platform hasn't properly defined its interrupt controller\n"); | |
| err = -ENOENT; | |
| } | |
| return err; | |
| } | |
| static void mipspmu_free_irq(void) | |
| { | |
| if (mipspmu.irq >= 0) | |
| free_irq(mipspmu.irq, &mipspmu); | |
| else if (cp0_perfcount_irq < 0) | |
| perf_irq = save_perf_irq; | |
| } | |
| /* | |
| * mipsxx/rm9000/loongson2 have different performance counters, they have | |
| * specific low-level init routines. | |
| */ | |
| static void reset_counters(void *arg); | |
| static int __hw_perf_event_init(struct perf_event *event); | |
| static void hw_perf_event_destroy(struct perf_event *event) | |
| { | |
| if (atomic_dec_and_mutex_lock(&active_events, | |
| &pmu_reserve_mutex)) { | |
| /* | |
| * We must not call the destroy function with interrupts | |
| * disabled. | |
| */ | |
| on_each_cpu(reset_counters, | |
| (void *)(long)mipspmu.num_counters, 1); | |
| mipspmu_free_irq(); | |
| mutex_unlock(&pmu_reserve_mutex); | |
| } | |
| } | |
| static int mipspmu_event_init(struct perf_event *event) | |
| { | |
| int err = 0; | |
| /* does not support taken branch sampling */ | |
| if (has_branch_stack(event)) | |
| return -EOPNOTSUPP; | |
| switch (event->attr.type) { | |
| case PERF_TYPE_RAW: | |
| case PERF_TYPE_HARDWARE: | |
| case PERF_TYPE_HW_CACHE: | |
| break; | |
| default: | |
| return -ENOENT; | |
| } | |
| if (event->cpu >= nr_cpumask_bits || | |
| (event->cpu >= 0 && !cpu_online(event->cpu))) | |
| return -ENODEV; | |
| if (!atomic_inc_not_zero(&active_events)) { | |
| mutex_lock(&pmu_reserve_mutex); | |
| if (atomic_read(&active_events) == 0) | |
| err = mipspmu_get_irq(); | |
| if (!err) | |
| atomic_inc(&active_events); | |
| mutex_unlock(&pmu_reserve_mutex); | |
| } | |
| if (err) | |
| return err; | |
| return __hw_perf_event_init(event); | |
| } | |
| static struct pmu pmu = { | |
| .pmu_enable = mipspmu_enable, | |
| .pmu_disable = mipspmu_disable, | |
| .event_init = mipspmu_event_init, | |
| .add = mipspmu_add, | |
| .del = mipspmu_del, | |
| .start = mipspmu_start, | |
| .stop = mipspmu_stop, | |
| .read = mipspmu_read, | |
| }; | |
| static unsigned int mipspmu_perf_event_encode(const struct mips_perf_event *pev) | |
| { | |
| /* | |
| * Top 8 bits for range, next 16 bits for cntr_mask, lowest 8 bits for | |
| * event_id. | |
| */ | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| return ((unsigned int)pev->range << 24) | | |
| (pev->cntr_mask & 0xffff00) | | |
| (pev->event_id & 0xff); | |
| #else | |
| return (pev->cntr_mask & 0xffff00) | | |
| (pev->event_id & 0xff); | |
| #endif | |
| } | |
| static const struct mips_perf_event *mipspmu_map_general_event(int idx) | |
| { | |
| if ((*mipspmu.general_event_map)[idx].cntr_mask == 0) | |
| return ERR_PTR(-EOPNOTSUPP); | |
| return &(*mipspmu.general_event_map)[idx]; | |
| } | |
| static const struct mips_perf_event *mipspmu_map_cache_event(u64 config) | |
| { | |
| unsigned int cache_type, cache_op, cache_result; | |
| const struct mips_perf_event *pev; | |
| cache_type = (config >> 0) & 0xff; | |
| if (cache_type >= PERF_COUNT_HW_CACHE_MAX) | |
| return ERR_PTR(-EINVAL); | |
| cache_op = (config >> 8) & 0xff; | |
| if (cache_op >= PERF_COUNT_HW_CACHE_OP_MAX) | |
| return ERR_PTR(-EINVAL); | |
| cache_result = (config >> 16) & 0xff; | |
| if (cache_result >= PERF_COUNT_HW_CACHE_RESULT_MAX) | |
| return ERR_PTR(-EINVAL); | |
| pev = &((*mipspmu.cache_event_map) | |
| [cache_type] | |
| [cache_op] | |
| [cache_result]); | |
| if (pev->cntr_mask == 0) | |
| return ERR_PTR(-EOPNOTSUPP); | |
| return pev; | |
| } | |
| static int validate_group(struct perf_event *event) | |
| { | |
| struct perf_event *sibling, *leader = event->group_leader; | |
| struct cpu_hw_events fake_cpuc; | |
| memset(&fake_cpuc, 0, sizeof(fake_cpuc)); | |
| if (mipsxx_pmu_alloc_counter(&fake_cpuc, &leader->hw) < 0) | |
| return -EINVAL; | |
| list_for_each_entry(sibling, &leader->sibling_list, group_entry) { | |
| if (mipsxx_pmu_alloc_counter(&fake_cpuc, &sibling->hw) < 0) | |
| return -EINVAL; | |
| } | |
| if (mipsxx_pmu_alloc_counter(&fake_cpuc, &event->hw) < 0) | |
| return -EINVAL; | |
| return 0; | |
| } | |
| /* This is needed by specific irq handlers in perf_event_*.c */ | |
| static void handle_associated_event(struct cpu_hw_events *cpuc, | |
| int idx, struct perf_sample_data *data, | |
| struct pt_regs *regs) | |
| { | |
| struct perf_event *event = cpuc->events[idx]; | |
| struct hw_perf_event *hwc = &event->hw; | |
| mipspmu_event_update(event, hwc, idx); | |
| data->period = event->hw.last_period; | |
| if (!mipspmu_event_set_period(event, hwc, idx)) | |
| return; | |
| if (perf_event_overflow(event, data, regs)) | |
| mipsxx_pmu_disable_event(idx); | |
| } | |
| static int __n_counters(void) | |
| { | |
| if (!cpu_has_perf) | |
| return 0; | |
| if (!(read_c0_perfctrl0() & M_PERFCTL_MORE)) | |
| return 1; | |
| if (!(read_c0_perfctrl1() & M_PERFCTL_MORE)) | |
| return 2; | |
| if (!(read_c0_perfctrl2() & M_PERFCTL_MORE)) | |
| return 3; | |
| return 4; | |
| } | |
| static int n_counters(void) | |
| { | |
| int counters; | |
| switch (current_cpu_type()) { | |
| case CPU_R10000: | |
| counters = 2; | |
| break; | |
| case CPU_R12000: | |
| case CPU_R14000: | |
| case CPU_R16000: | |
| counters = 4; | |
| break; | |
| default: | |
| counters = __n_counters(); | |
| } | |
| return counters; | |
| } | |
| static void reset_counters(void *arg) | |
| { | |
| int counters = (int)(long)arg; | |
| switch (counters) { | |
| case 4: | |
| mipsxx_pmu_write_control(3, 0); | |
| mipspmu.write_counter(3, 0); | |
| case 3: | |
| mipsxx_pmu_write_control(2, 0); | |
| mipspmu.write_counter(2, 0); | |
| case 2: | |
| mipsxx_pmu_write_control(1, 0); | |
| mipspmu.write_counter(1, 0); | |
| case 1: | |
| mipsxx_pmu_write_control(0, 0); | |
| mipspmu.write_counter(0, 0); | |
| } | |
| } | |
| /* 24K/34K/1004K/interAptiv/loongson1 cores share the same event map. */ | |
| static const struct mips_perf_event mipsxxcore_event_map | |
| [PERF_COUNT_HW_MAX] = { | |
| [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, P }, | |
| [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T }, | |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x02, CNTR_EVEN, T }, | |
| [PERF_COUNT_HW_BRANCH_MISSES] = { 0x02, CNTR_ODD, T }, | |
| }; | |
| /* 74K/proAptiv core has different branch event code. */ | |
| static const struct mips_perf_event mipsxxcore_event_map2 | |
| [PERF_COUNT_HW_MAX] = { | |
| [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, P }, | |
| [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T }, | |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x27, CNTR_EVEN, T }, | |
| [PERF_COUNT_HW_BRANCH_MISSES] = { 0x27, CNTR_ODD, T }, | |
| }; | |
| static const struct mips_perf_event i6400_event_map[PERF_COUNT_HW_MAX] = { | |
| [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD }, | |
| [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD }, | |
| /* These only count dcache, not icache */ | |
| [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x45, CNTR_EVEN | CNTR_ODD }, | |
| [PERF_COUNT_HW_CACHE_MISSES] = { 0x48, CNTR_EVEN | CNTR_ODD }, | |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x15, CNTR_EVEN | CNTR_ODD }, | |
| [PERF_COUNT_HW_BRANCH_MISSES] = { 0x16, CNTR_EVEN | CNTR_ODD }, | |
| }; | |
| static const struct mips_perf_event loongson3_event_map[PERF_COUNT_HW_MAX] = { | |
| [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN }, | |
| [PERF_COUNT_HW_INSTRUCTIONS] = { 0x00, CNTR_ODD }, | |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x01, CNTR_EVEN }, | |
| [PERF_COUNT_HW_BRANCH_MISSES] = { 0x01, CNTR_ODD }, | |
| }; | |
| static const struct mips_perf_event octeon_event_map[PERF_COUNT_HW_MAX] = { | |
| [PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL }, | |
| [PERF_COUNT_HW_INSTRUCTIONS] = { 0x03, CNTR_ALL }, | |
| [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x2b, CNTR_ALL }, | |
| [PERF_COUNT_HW_CACHE_MISSES] = { 0x2e, CNTR_ALL }, | |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x08, CNTR_ALL }, | |
| [PERF_COUNT_HW_BRANCH_MISSES] = { 0x09, CNTR_ALL }, | |
| [PERF_COUNT_HW_BUS_CYCLES] = { 0x25, CNTR_ALL }, | |
| }; | |
| static const struct mips_perf_event bmips5000_event_map | |
| [PERF_COUNT_HW_MAX] = { | |
| [PERF_COUNT_HW_CPU_CYCLES] = { 0x00, CNTR_EVEN | CNTR_ODD, T }, | |
| [PERF_COUNT_HW_INSTRUCTIONS] = { 0x01, CNTR_EVEN | CNTR_ODD, T }, | |
| [PERF_COUNT_HW_BRANCH_MISSES] = { 0x02, CNTR_ODD, T }, | |
| }; | |
| static const struct mips_perf_event xlp_event_map[PERF_COUNT_HW_MAX] = { | |
| [PERF_COUNT_HW_CPU_CYCLES] = { 0x01, CNTR_ALL }, | |
| [PERF_COUNT_HW_INSTRUCTIONS] = { 0x18, CNTR_ALL }, /* PAPI_TOT_INS */ | |
| [PERF_COUNT_HW_CACHE_REFERENCES] = { 0x04, CNTR_ALL }, /* PAPI_L1_ICA */ | |
| [PERF_COUNT_HW_CACHE_MISSES] = { 0x07, CNTR_ALL }, /* PAPI_L1_ICM */ | |
| [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = { 0x1b, CNTR_ALL }, /* PAPI_BR_CN */ | |
| [PERF_COUNT_HW_BRANCH_MISSES] = { 0x1c, CNTR_ALL }, /* PAPI_BR_MSP */ | |
| }; | |
| /* 24K/34K/1004K/interAptiv/loongson1 cores share the same cache event map. */ | |
| static const struct mips_perf_event mipsxxcore_cache_map | |
| [PERF_COUNT_HW_CACHE_MAX] | |
| [PERF_COUNT_HW_CACHE_OP_MAX] | |
| [PERF_COUNT_HW_CACHE_RESULT_MAX] = { | |
| [C(L1D)] = { | |
| /* | |
| * Like some other architectures (e.g. ARM), the performance | |
| * counters don't differentiate between read and write | |
| * accesses/misses, so this isn't strictly correct, but it's the | |
| * best we can do. Writes and reads get combined. | |
| */ | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x0a, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x0b, CNTR_EVEN | CNTR_ODD, T }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x0a, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x0b, CNTR_EVEN | CNTR_ODD, T }, | |
| }, | |
| }, | |
| [C(L1I)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x09, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x09, CNTR_ODD, T }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x09, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x09, CNTR_ODD, T }, | |
| }, | |
| [C(OP_PREFETCH)] = { | |
| [C(RESULT_ACCESS)] = { 0x14, CNTR_EVEN, T }, | |
| /* | |
| * Note that MIPS has only "hit" events countable for | |
| * the prefetch operation. | |
| */ | |
| }, | |
| }, | |
| [C(LL)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x15, CNTR_ODD, P }, | |
| [C(RESULT_MISS)] = { 0x16, CNTR_EVEN, P }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x15, CNTR_ODD, P }, | |
| [C(RESULT_MISS)] = { 0x16, CNTR_EVEN, P }, | |
| }, | |
| }, | |
| [C(DTLB)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T }, | |
| }, | |
| }, | |
| [C(ITLB)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x05, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x05, CNTR_ODD, T }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x05, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x05, CNTR_ODD, T }, | |
| }, | |
| }, | |
| [C(BPU)] = { | |
| /* Using the same code for *HW_BRANCH* */ | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T }, | |
| }, | |
| }, | |
| }; | |
| /* 74K/proAptiv core has completely different cache event map. */ | |
| static const struct mips_perf_event mipsxxcore_cache_map2 | |
| [PERF_COUNT_HW_CACHE_MAX] | |
| [PERF_COUNT_HW_CACHE_OP_MAX] | |
| [PERF_COUNT_HW_CACHE_RESULT_MAX] = { | |
| [C(L1D)] = { | |
| /* | |
| * Like some other architectures (e.g. ARM), the performance | |
| * counters don't differentiate between read and write | |
| * accesses/misses, so this isn't strictly correct, but it's the | |
| * best we can do. Writes and reads get combined. | |
| */ | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x17, CNTR_ODD, T }, | |
| [C(RESULT_MISS)] = { 0x18, CNTR_ODD, T }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x17, CNTR_ODD, T }, | |
| [C(RESULT_MISS)] = { 0x18, CNTR_ODD, T }, | |
| }, | |
| }, | |
| [C(L1I)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x06, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x06, CNTR_ODD, T }, | |
| }, | |
| [C(OP_PREFETCH)] = { | |
| [C(RESULT_ACCESS)] = { 0x34, CNTR_EVEN, T }, | |
| /* | |
| * Note that MIPS has only "hit" events countable for | |
| * the prefetch operation. | |
| */ | |
| }, | |
| }, | |
| [C(LL)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x1c, CNTR_ODD, P }, | |
| [C(RESULT_MISS)] = { 0x1d, CNTR_EVEN, P }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x1c, CNTR_ODD, P }, | |
| [C(RESULT_MISS)] = { 0x1d, CNTR_EVEN, P }, | |
| }, | |
| }, | |
| /* | |
| * 74K core does not have specific DTLB events. proAptiv core has | |
| * "speculative" DTLB events which are numbered 0x63 (even/odd) and | |
| * not included here. One can use raw events if really needed. | |
| */ | |
| [C(ITLB)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x04, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x04, CNTR_ODD, T }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x04, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x04, CNTR_ODD, T }, | |
| }, | |
| }, | |
| [C(BPU)] = { | |
| /* Using the same code for *HW_BRANCH* */ | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x27, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x27, CNTR_ODD, T }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x27, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 0x27, CNTR_ODD, T }, | |
| }, | |
| }, | |
| }; | |
| static const struct mips_perf_event i6400_cache_map | |
| [PERF_COUNT_HW_CACHE_MAX] | |
| [PERF_COUNT_HW_CACHE_OP_MAX] | |
| [PERF_COUNT_HW_CACHE_RESULT_MAX] = { | |
| [C(L1D)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x46, CNTR_EVEN | CNTR_ODD }, | |
| [C(RESULT_MISS)] = { 0x49, CNTR_EVEN | CNTR_ODD }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x47, CNTR_EVEN | CNTR_ODD }, | |
| [C(RESULT_MISS)] = { 0x4a, CNTR_EVEN | CNTR_ODD }, | |
| }, | |
| }, | |
| [C(L1I)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x84, CNTR_EVEN | CNTR_ODD }, | |
| [C(RESULT_MISS)] = { 0x85, CNTR_EVEN | CNTR_ODD }, | |
| }, | |
| }, | |
| [C(DTLB)] = { | |
| /* Can't distinguish read & write */ | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x40, CNTR_EVEN | CNTR_ODD }, | |
| [C(RESULT_MISS)] = { 0x41, CNTR_EVEN | CNTR_ODD }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x40, CNTR_EVEN | CNTR_ODD }, | |
| [C(RESULT_MISS)] = { 0x41, CNTR_EVEN | CNTR_ODD }, | |
| }, | |
| }, | |
| [C(BPU)] = { | |
| /* Conditional branches / mispredicted */ | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x15, CNTR_EVEN | CNTR_ODD }, | |
| [C(RESULT_MISS)] = { 0x16, CNTR_EVEN | CNTR_ODD }, | |
| }, | |
| }, | |
| }; | |
| static const struct mips_perf_event loongson3_cache_map | |
| [PERF_COUNT_HW_CACHE_MAX] | |
| [PERF_COUNT_HW_CACHE_OP_MAX] | |
| [PERF_COUNT_HW_CACHE_RESULT_MAX] = { | |
| [C(L1D)] = { | |
| /* | |
| * Like some other architectures (e.g. ARM), the performance | |
| * counters don't differentiate between read and write | |
| * accesses/misses, so this isn't strictly correct, but it's the | |
| * best we can do. Writes and reads get combined. | |
| */ | |
| [C(OP_READ)] = { | |
| [C(RESULT_MISS)] = { 0x04, CNTR_ODD }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_MISS)] = { 0x04, CNTR_ODD }, | |
| }, | |
| }, | |
| [C(L1I)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_MISS)] = { 0x04, CNTR_EVEN }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_MISS)] = { 0x04, CNTR_EVEN }, | |
| }, | |
| }, | |
| [C(DTLB)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_MISS)] = { 0x09, CNTR_ODD }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_MISS)] = { 0x09, CNTR_ODD }, | |
| }, | |
| }, | |
| [C(ITLB)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_MISS)] = { 0x0c, CNTR_ODD }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_MISS)] = { 0x0c, CNTR_ODD }, | |
| }, | |
| }, | |
| [C(BPU)] = { | |
| /* Using the same code for *HW_BRANCH* */ | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN }, | |
| [C(RESULT_MISS)] = { 0x02, CNTR_ODD }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x02, CNTR_EVEN }, | |
| [C(RESULT_MISS)] = { 0x02, CNTR_ODD }, | |
| }, | |
| }, | |
| }; | |
| /* BMIPS5000 */ | |
| static const struct mips_perf_event bmips5000_cache_map | |
| [PERF_COUNT_HW_CACHE_MAX] | |
| [PERF_COUNT_HW_CACHE_OP_MAX] | |
| [PERF_COUNT_HW_CACHE_RESULT_MAX] = { | |
| [C(L1D)] = { | |
| /* | |
| * Like some other architectures (e.g. ARM), the performance | |
| * counters don't differentiate between read and write | |
| * accesses/misses, so this isn't strictly correct, but it's the | |
| * best we can do. Writes and reads get combined. | |
| */ | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 12, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 12, CNTR_ODD, T }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 12, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 12, CNTR_ODD, T }, | |
| }, | |
| }, | |
| [C(L1I)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 10, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 10, CNTR_ODD, T }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 10, CNTR_EVEN, T }, | |
| [C(RESULT_MISS)] = { 10, CNTR_ODD, T }, | |
| }, | |
| [C(OP_PREFETCH)] = { | |
| [C(RESULT_ACCESS)] = { 23, CNTR_EVEN, T }, | |
| /* | |
| * Note that MIPS has only "hit" events countable for | |
| * the prefetch operation. | |
| */ | |
| }, | |
| }, | |
| [C(LL)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 28, CNTR_EVEN, P }, | |
| [C(RESULT_MISS)] = { 28, CNTR_ODD, P }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 28, CNTR_EVEN, P }, | |
| [C(RESULT_MISS)] = { 28, CNTR_ODD, P }, | |
| }, | |
| }, | |
| [C(BPU)] = { | |
| /* Using the same code for *HW_BRANCH* */ | |
| [C(OP_READ)] = { | |
| [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_MISS)] = { 0x02, CNTR_ODD, T }, | |
| }, | |
| }, | |
| }; | |
| static const struct mips_perf_event octeon_cache_map | |
| [PERF_COUNT_HW_CACHE_MAX] | |
| [PERF_COUNT_HW_CACHE_OP_MAX] | |
| [PERF_COUNT_HW_CACHE_RESULT_MAX] = { | |
| [C(L1D)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x2b, CNTR_ALL }, | |
| [C(RESULT_MISS)] = { 0x2e, CNTR_ALL }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x30, CNTR_ALL }, | |
| }, | |
| }, | |
| [C(L1I)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x18, CNTR_ALL }, | |
| }, | |
| [C(OP_PREFETCH)] = { | |
| [C(RESULT_ACCESS)] = { 0x19, CNTR_ALL }, | |
| }, | |
| }, | |
| [C(DTLB)] = { | |
| /* | |
| * Only general DTLB misses are counted use the same event for | |
| * read and write. | |
| */ | |
| [C(OP_READ)] = { | |
| [C(RESULT_MISS)] = { 0x35, CNTR_ALL }, | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_MISS)] = { 0x35, CNTR_ALL }, | |
| }, | |
| }, | |
| [C(ITLB)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_MISS)] = { 0x37, CNTR_ALL }, | |
| }, | |
| }, | |
| }; | |
| static const struct mips_perf_event xlp_cache_map | |
| [PERF_COUNT_HW_CACHE_MAX] | |
| [PERF_COUNT_HW_CACHE_OP_MAX] | |
| [PERF_COUNT_HW_CACHE_RESULT_MAX] = { | |
| [C(L1D)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x31, CNTR_ALL }, /* PAPI_L1_DCR */ | |
| [C(RESULT_MISS)] = { 0x30, CNTR_ALL }, /* PAPI_L1_LDM */ | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x2f, CNTR_ALL }, /* PAPI_L1_DCW */ | |
| [C(RESULT_MISS)] = { 0x2e, CNTR_ALL }, /* PAPI_L1_STM */ | |
| }, | |
| }, | |
| [C(L1I)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x04, CNTR_ALL }, /* PAPI_L1_ICA */ | |
| [C(RESULT_MISS)] = { 0x07, CNTR_ALL }, /* PAPI_L1_ICM */ | |
| }, | |
| }, | |
| [C(LL)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_ACCESS)] = { 0x35, CNTR_ALL }, /* PAPI_L2_DCR */ | |
| [C(RESULT_MISS)] = { 0x37, CNTR_ALL }, /* PAPI_L2_LDM */ | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_ACCESS)] = { 0x34, CNTR_ALL }, /* PAPI_L2_DCA */ | |
| [C(RESULT_MISS)] = { 0x36, CNTR_ALL }, /* PAPI_L2_DCM */ | |
| }, | |
| }, | |
| [C(DTLB)] = { | |
| /* | |
| * Only general DTLB misses are counted use the same event for | |
| * read and write. | |
| */ | |
| [C(OP_READ)] = { | |
| [C(RESULT_MISS)] = { 0x2d, CNTR_ALL }, /* PAPI_TLB_DM */ | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_MISS)] = { 0x2d, CNTR_ALL }, /* PAPI_TLB_DM */ | |
| }, | |
| }, | |
| [C(ITLB)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_MISS)] = { 0x08, CNTR_ALL }, /* PAPI_TLB_IM */ | |
| }, | |
| [C(OP_WRITE)] = { | |
| [C(RESULT_MISS)] = { 0x08, CNTR_ALL }, /* PAPI_TLB_IM */ | |
| }, | |
| }, | |
| [C(BPU)] = { | |
| [C(OP_READ)] = { | |
| [C(RESULT_MISS)] = { 0x25, CNTR_ALL }, | |
| }, | |
| }, | |
| }; | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| static void check_and_calc_range(struct perf_event *event, | |
| const struct mips_perf_event *pev) | |
| { | |
| struct hw_perf_event *hwc = &event->hw; | |
| if (event->cpu >= 0) { | |
| if (pev->range > V) { | |
| /* | |
| * The user selected an event that is processor | |
| * wide, while expecting it to be VPE wide. | |
| */ | |
| hwc->config_base |= M_TC_EN_ALL; | |
| } else { | |
| /* | |
| * FIXME: cpu_data[event->cpu].vpe_id reports 0 | |
| * for both CPUs. | |
| */ | |
| hwc->config_base |= M_PERFCTL_VPEID(event->cpu); | |
| hwc->config_base |= M_TC_EN_VPE; | |
| } | |
| } else | |
| hwc->config_base |= M_TC_EN_ALL; | |
| } | |
| #else | |
| static void check_and_calc_range(struct perf_event *event, | |
| const struct mips_perf_event *pev) | |
| { | |
| } | |
| #endif | |
| static int __hw_perf_event_init(struct perf_event *event) | |
| { | |
| struct perf_event_attr *attr = &event->attr; | |
| struct hw_perf_event *hwc = &event->hw; | |
| const struct mips_perf_event *pev; | |
| int err; | |
| /* Returning MIPS event descriptor for generic perf event. */ | |
| if (PERF_TYPE_HARDWARE == event->attr.type) { | |
| if (event->attr.config >= PERF_COUNT_HW_MAX) | |
| return -EINVAL; | |
| pev = mipspmu_map_general_event(event->attr.config); | |
| } else if (PERF_TYPE_HW_CACHE == event->attr.type) { | |
| pev = mipspmu_map_cache_event(event->attr.config); | |
| } else if (PERF_TYPE_RAW == event->attr.type) { | |
| /* We are working on the global raw event. */ | |
| mutex_lock(&raw_event_mutex); | |
| pev = mipspmu.map_raw_event(event->attr.config); | |
| } else { | |
| /* The event type is not (yet) supported. */ | |
| return -EOPNOTSUPP; | |
| } | |
| if (IS_ERR(pev)) { | |
| if (PERF_TYPE_RAW == event->attr.type) | |
| mutex_unlock(&raw_event_mutex); | |
| return PTR_ERR(pev); | |
| } | |
| /* | |
| * We allow max flexibility on how each individual counter shared | |
| * by the single CPU operates (the mode exclusion and the range). | |
| */ | |
| hwc->config_base = M_PERFCTL_INTERRUPT_ENABLE; | |
| /* Calculate range bits and validate it. */ | |
| if (num_possible_cpus() > 1) | |
| check_and_calc_range(event, pev); | |
| hwc->event_base = mipspmu_perf_event_encode(pev); | |
| if (PERF_TYPE_RAW == event->attr.type) | |
| mutex_unlock(&raw_event_mutex); | |
| if (!attr->exclude_user) | |
| hwc->config_base |= M_PERFCTL_USER; | |
| if (!attr->exclude_kernel) { | |
| hwc->config_base |= M_PERFCTL_KERNEL; | |
| /* MIPS kernel mode: KSU == 00b || EXL == 1 || ERL == 1 */ | |
| hwc->config_base |= M_PERFCTL_EXL; | |
| } | |
| if (!attr->exclude_hv) | |
| hwc->config_base |= M_PERFCTL_SUPERVISOR; | |
| hwc->config_base &= M_PERFCTL_CONFIG_MASK; | |
| /* | |
| * The event can belong to another cpu. We do not assign a local | |
| * counter for it for now. | |
| */ | |
| hwc->idx = -1; | |
| hwc->config = 0; | |
| if (!hwc->sample_period) { | |
| hwc->sample_period = mipspmu.max_period; | |
| hwc->last_period = hwc->sample_period; | |
| local64_set(&hwc->period_left, hwc->sample_period); | |
| } | |
| err = 0; | |
| if (event->group_leader != event) | |
| err = validate_group(event); | |
| event->destroy = hw_perf_event_destroy; | |
| if (err) | |
| event->destroy(event); | |
| return err; | |
| } | |
| static void pause_local_counters(void) | |
| { | |
| struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); | |
| int ctr = mipspmu.num_counters; | |
| unsigned long flags; | |
| local_irq_save(flags); | |
| do { | |
| ctr--; | |
| cpuc->saved_ctrl[ctr] = mipsxx_pmu_read_control(ctr); | |
| mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr] & | |
| ~M_PERFCTL_COUNT_EVENT_WHENEVER); | |
| } while (ctr > 0); | |
| local_irq_restore(flags); | |
| } | |
| static void resume_local_counters(void) | |
| { | |
| struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); | |
| int ctr = mipspmu.num_counters; | |
| do { | |
| ctr--; | |
| mipsxx_pmu_write_control(ctr, cpuc->saved_ctrl[ctr]); | |
| } while (ctr > 0); | |
| } | |
| static int mipsxx_pmu_handle_shared_irq(void) | |
| { | |
| struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events); | |
| struct perf_sample_data data; | |
| unsigned int counters = mipspmu.num_counters; | |
| u64 counter; | |
| int handled = IRQ_NONE; | |
| struct pt_regs *regs; | |
| if (cpu_has_perf_cntr_intr_bit && !(read_c0_cause() & CAUSEF_PCI)) | |
| return handled; | |
| /* | |
| * First we pause the local counters, so that when we are locked | |
| * here, the counters are all paused. When it gets locked due to | |
| * perf_disable(), the timer interrupt handler will be delayed. | |
| * | |
| * See also mipsxx_pmu_start(). | |
| */ | |
| pause_local_counters(); | |
| #ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS | |
| read_lock(&pmuint_rwlock); | |
| #endif | |
| regs = get_irq_regs(); | |
| perf_sample_data_init(&data, 0, 0); | |
| switch (counters) { | |
| #define HANDLE_COUNTER(n) \ | |
| case n + 1: \ | |
| if (test_bit(n, cpuc->used_mask)) { \ | |
| counter = mipspmu.read_counter(n); \ | |
| if (counter & mipspmu.overflow) { \ | |
| handle_associated_event(cpuc, n, &data, regs); \ | |
| handled = IRQ_HANDLED; \ | |
| } \ | |
| } | |
| HANDLE_COUNTER(3) | |
| HANDLE_COUNTER(2) | |
| HANDLE_COUNTER(1) | |
| HANDLE_COUNTER(0) | |
| } | |
| /* | |
| * Do all the work for the pending perf events. We can do this | |
| * in here because the performance counter interrupt is a regular | |
| * interrupt, not NMI. | |
| */ | |
| if (handled == IRQ_HANDLED) | |
| irq_work_run(); | |
| #ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS | |
| read_unlock(&pmuint_rwlock); | |
| #endif | |
| resume_local_counters(); | |
| return handled; | |
| } | |
| static irqreturn_t mipsxx_pmu_handle_irq(int irq, void *dev) | |
| { | |
| return mipsxx_pmu_handle_shared_irq(); | |
| } | |
| /* 24K */ | |
| #define IS_BOTH_COUNTERS_24K_EVENT(b) \ | |
| ((b) == 0 || (b) == 1 || (b) == 11) | |
| /* 34K */ | |
| #define IS_BOTH_COUNTERS_34K_EVENT(b) \ | |
| ((b) == 0 || (b) == 1 || (b) == 11) | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| #define IS_RANGE_P_34K_EVENT(r, b) \ | |
| ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 || \ | |
| (b) == 25 || (b) == 39 || (r) == 44 || (r) == 174 || \ | |
| (r) == 176 || ((b) >= 50 && (b) <= 55) || \ | |
| ((b) >= 64 && (b) <= 67)) | |
| #define IS_RANGE_V_34K_EVENT(r) ((r) == 47) | |
| #endif | |
| /* 74K */ | |
| #define IS_BOTH_COUNTERS_74K_EVENT(b) \ | |
| ((b) == 0 || (b) == 1) | |
| /* proAptiv */ | |
| #define IS_BOTH_COUNTERS_PROAPTIV_EVENT(b) \ | |
| ((b) == 0 || (b) == 1) | |
| /* P5600 */ | |
| #define IS_BOTH_COUNTERS_P5600_EVENT(b) \ | |
| ((b) == 0 || (b) == 1) | |
| /* 1004K */ | |
| #define IS_BOTH_COUNTERS_1004K_EVENT(b) \ | |
| ((b) == 0 || (b) == 1 || (b) == 11) | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| #define IS_RANGE_P_1004K_EVENT(r, b) \ | |
| ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 || \ | |
| (b) == 25 || (b) == 36 || (b) == 39 || (r) == 44 || \ | |
| (r) == 174 || (r) == 176 || ((b) >= 50 && (b) <= 59) || \ | |
| (r) == 188 || (b) == 61 || (b) == 62 || \ | |
| ((b) >= 64 && (b) <= 67)) | |
| #define IS_RANGE_V_1004K_EVENT(r) ((r) == 47) | |
| #endif | |
| /* interAptiv */ | |
| #define IS_BOTH_COUNTERS_INTERAPTIV_EVENT(b) \ | |
| ((b) == 0 || (b) == 1 || (b) == 11) | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| /* The P/V/T info is not provided for "(b) == 38" in SUM, assume P. */ | |
| #define IS_RANGE_P_INTERAPTIV_EVENT(r, b) \ | |
| ((b) == 0 || (r) == 18 || (b) == 21 || (b) == 22 || \ | |
| (b) == 25 || (b) == 36 || (b) == 38 || (b) == 39 || \ | |
| (r) == 44 || (r) == 174 || (r) == 176 || ((b) >= 50 && \ | |
| (b) <= 59) || (r) == 188 || (b) == 61 || (b) == 62 || \ | |
| ((b) >= 64 && (b) <= 67)) | |
| #define IS_RANGE_V_INTERAPTIV_EVENT(r) ((r) == 47 || (r) == 175) | |
| #endif | |
| /* BMIPS5000 */ | |
| #define IS_BOTH_COUNTERS_BMIPS5000_EVENT(b) \ | |
| ((b) == 0 || (b) == 1) | |
| /* | |
| * For most cores the user can use 0-255 raw events, where 0-127 for the events | |
| * of even counters, and 128-255 for odd counters. Note that bit 7 is used to | |
| * indicate the even/odd bank selector. So, for example, when user wants to take | |
| * the Event Num of 15 for odd counters (by referring to the user manual), then | |
| * 128 needs to be added to 15 as the input for the event config, i.e., 143 (0x8F) | |
| * to be used. | |
| * | |
| * Some newer cores have even more events, in which case the user can use raw | |
| * events 0-511, where 0-255 are for the events of even counters, and 256-511 | |
| * are for odd counters, so bit 8 is used to indicate the even/odd bank selector. | |
| */ | |
| static const struct mips_perf_event *mipsxx_pmu_map_raw_event(u64 config) | |
| { | |
| /* currently most cores have 7-bit event numbers */ | |
| unsigned int raw_id = config & 0xff; | |
| unsigned int base_id = raw_id & 0x7f; | |
| switch (current_cpu_type()) { | |
| case CPU_24K: | |
| if (IS_BOTH_COUNTERS_24K_EVENT(base_id)) | |
| raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; | |
| else | |
| raw_event.cntr_mask = | |
| raw_id > 127 ? CNTR_ODD : CNTR_EVEN; | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| /* | |
| * This is actually doing nothing. Non-multithreading | |
| * CPUs will not check and calculate the range. | |
| */ | |
| raw_event.range = P; | |
| #endif | |
| break; | |
| case CPU_34K: | |
| if (IS_BOTH_COUNTERS_34K_EVENT(base_id)) | |
| raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; | |
| else | |
| raw_event.cntr_mask = | |
| raw_id > 127 ? CNTR_ODD : CNTR_EVEN; | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| if (IS_RANGE_P_34K_EVENT(raw_id, base_id)) | |
| raw_event.range = P; | |
| else if (unlikely(IS_RANGE_V_34K_EVENT(raw_id))) | |
| raw_event.range = V; | |
| else | |
| raw_event.range = T; | |
| #endif | |
| break; | |
| case CPU_74K: | |
| case CPU_1074K: | |
| if (IS_BOTH_COUNTERS_74K_EVENT(base_id)) | |
| raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; | |
| else | |
| raw_event.cntr_mask = | |
| raw_id > 127 ? CNTR_ODD : CNTR_EVEN; | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| raw_event.range = P; | |
| #endif | |
| break; | |
| case CPU_PROAPTIV: | |
| if (IS_BOTH_COUNTERS_PROAPTIV_EVENT(base_id)) | |
| raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; | |
| else | |
| raw_event.cntr_mask = | |
| raw_id > 127 ? CNTR_ODD : CNTR_EVEN; | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| raw_event.range = P; | |
| #endif | |
| break; | |
| case CPU_P5600: | |
| case CPU_P6600: | |
| case CPU_I6400: | |
| /* 8-bit event numbers */ | |
| raw_id = config & 0x1ff; | |
| base_id = raw_id & 0xff; | |
| if (IS_BOTH_COUNTERS_P5600_EVENT(base_id)) | |
| raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; | |
| else | |
| raw_event.cntr_mask = | |
| raw_id > 255 ? CNTR_ODD : CNTR_EVEN; | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| raw_event.range = P; | |
| #endif | |
| break; | |
| case CPU_1004K: | |
| if (IS_BOTH_COUNTERS_1004K_EVENT(base_id)) | |
| raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; | |
| else | |
| raw_event.cntr_mask = | |
| raw_id > 127 ? CNTR_ODD : CNTR_EVEN; | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| if (IS_RANGE_P_1004K_EVENT(raw_id, base_id)) | |
| raw_event.range = P; | |
| else if (unlikely(IS_RANGE_V_1004K_EVENT(raw_id))) | |
| raw_event.range = V; | |
| else | |
| raw_event.range = T; | |
| #endif | |
| break; | |
| case CPU_INTERAPTIV: | |
| if (IS_BOTH_COUNTERS_INTERAPTIV_EVENT(base_id)) | |
| raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; | |
| else | |
| raw_event.cntr_mask = | |
| raw_id > 127 ? CNTR_ODD : CNTR_EVEN; | |
| #ifdef CONFIG_MIPS_MT_SMP | |
| if (IS_RANGE_P_INTERAPTIV_EVENT(raw_id, base_id)) | |
| raw_event.range = P; | |
| else if (unlikely(IS_RANGE_V_INTERAPTIV_EVENT(raw_id))) | |
| raw_event.range = V; | |
| else | |
| raw_event.range = T; | |
| #endif | |
| break; | |
| case CPU_BMIPS5000: | |
| if (IS_BOTH_COUNTERS_BMIPS5000_EVENT(base_id)) | |
| raw_event.cntr_mask = CNTR_EVEN | CNTR_ODD; | |
| else | |
| raw_event.cntr_mask = | |
| raw_id > 127 ? CNTR_ODD : CNTR_EVEN; | |
| break; | |
| case CPU_LOONGSON3: | |
| raw_event.cntr_mask = raw_id > 127 ? CNTR_ODD : CNTR_EVEN; | |
| break; | |
| } | |
| raw_event.event_id = base_id; | |
| return &raw_event; | |
| } | |
| static const struct mips_perf_event *octeon_pmu_map_raw_event(u64 config) | |
| { | |
| unsigned int raw_id = config & 0xff; | |
| unsigned int base_id = raw_id & 0x7f; | |
| raw_event.cntr_mask = CNTR_ALL; | |
| raw_event.event_id = base_id; | |
| if (current_cpu_type() == CPU_CAVIUM_OCTEON2) { | |
| if (base_id > 0x42) | |
| return ERR_PTR(-EOPNOTSUPP); | |
| } else { | |
| if (base_id > 0x3a) | |
| return ERR_PTR(-EOPNOTSUPP); | |
| } | |
| switch (base_id) { | |
| case 0x00: | |
| case 0x0f: | |
| case 0x1e: | |
| case 0x1f: | |
| case 0x2f: | |
| case 0x34: | |
| case 0x3b ... 0x3f: | |
| return ERR_PTR(-EOPNOTSUPP); | |
| default: | |
| break; | |
| } | |
| return &raw_event; | |
| } | |
| static const struct mips_perf_event *xlp_pmu_map_raw_event(u64 config) | |
| { | |
| unsigned int raw_id = config & 0xff; | |
| /* Only 1-63 are defined */ | |
| if ((raw_id < 0x01) || (raw_id > 0x3f)) | |
| return ERR_PTR(-EOPNOTSUPP); | |
| raw_event.cntr_mask = CNTR_ALL; | |
| raw_event.event_id = raw_id; | |
| return &raw_event; | |
| } | |
| static int __init | |
| init_hw_perf_events(void) | |
| { | |
| int counters, irq; | |
| int counter_bits; | |
| pr_info("Performance counters: "); | |
| counters = n_counters(); | |
| if (counters == 0) { | |
| pr_cont("No available PMU.\n"); | |
| return -ENODEV; | |
| } | |
| #ifdef CONFIG_MIPS_PERF_SHARED_TC_COUNTERS | |
| cpu_has_mipsmt_pertccounters = read_c0_config7() & (1<<19); | |
| if (!cpu_has_mipsmt_pertccounters) | |
| counters = counters_total_to_per_cpu(counters); | |
| #endif | |
| if (get_c0_perfcount_int) | |
| irq = get_c0_perfcount_int(); | |
| else if (cp0_perfcount_irq >= 0) | |
| irq = MIPS_CPU_IRQ_BASE + cp0_perfcount_irq; | |
| else | |
| irq = -1; | |
| mipspmu.map_raw_event = mipsxx_pmu_map_raw_event; | |
| switch (current_cpu_type()) { | |
| case CPU_24K: | |
| mipspmu.name = "mips/24K"; | |
| mipspmu.general_event_map = &mipsxxcore_event_map; | |
| mipspmu.cache_event_map = &mipsxxcore_cache_map; | |
| break; | |
| case CPU_34K: | |
| mipspmu.name = "mips/34K"; | |
| mipspmu.general_event_map = &mipsxxcore_event_map; | |
| mipspmu.cache_event_map = &mipsxxcore_cache_map; | |
| break; | |
| case CPU_74K: | |
| mipspmu.name = "mips/74K"; | |
| mipspmu.general_event_map = &mipsxxcore_event_map2; | |
| mipspmu.cache_event_map = &mipsxxcore_cache_map2; | |
| break; | |
| case CPU_PROAPTIV: | |
| mipspmu.name = "mips/proAptiv"; | |
| mipspmu.general_event_map = &mipsxxcore_event_map2; | |
| mipspmu.cache_event_map = &mipsxxcore_cache_map2; | |
| break; | |
| case CPU_P5600: | |
| mipspmu.name = "mips/P5600"; | |
| mipspmu.general_event_map = &mipsxxcore_event_map2; | |
| mipspmu.cache_event_map = &mipsxxcore_cache_map2; | |
| break; | |
| case CPU_P6600: | |
| mipspmu.name = "mips/P6600"; | |
| mipspmu.general_event_map = &mipsxxcore_event_map2; | |
| mipspmu.cache_event_map = &mipsxxcore_cache_map2; | |
| break; | |
| case CPU_I6400: | |
| mipspmu.name = "mips/I6400"; | |
| mipspmu.general_event_map = &i6400_event_map; | |
| mipspmu.cache_event_map = &i6400_cache_map; | |
| break; | |
| case CPU_1004K: | |
| mipspmu.name = "mips/1004K"; | |
| mipspmu.general_event_map = &mipsxxcore_event_map; | |
| mipspmu.cache_event_map = &mipsxxcore_cache_map; | |
| break; | |
| case CPU_1074K: | |
| mipspmu.name = "mips/1074K"; | |
| mipspmu.general_event_map = &mipsxxcore_event_map; | |
| mipspmu.cache_event_map = &mipsxxcore_cache_map; | |
| break; | |
| case CPU_INTERAPTIV: | |
| mipspmu.name = "mips/interAptiv"; | |
| mipspmu.general_event_map = &mipsxxcore_event_map; | |
| mipspmu.cache_event_map = &mipsxxcore_cache_map; | |
| break; | |
| case CPU_LOONGSON1: | |
| mipspmu.name = "mips/loongson1"; | |
| mipspmu.general_event_map = &mipsxxcore_event_map; | |
| mipspmu.cache_event_map = &mipsxxcore_cache_map; | |
| break; | |
| case CPU_LOONGSON3: | |
| mipspmu.name = "mips/loongson3"; | |
| mipspmu.general_event_map = &loongson3_event_map; | |
| mipspmu.cache_event_map = &loongson3_cache_map; | |
| break; | |
| case CPU_CAVIUM_OCTEON: | |
| case CPU_CAVIUM_OCTEON_PLUS: | |
| case CPU_CAVIUM_OCTEON2: | |
| mipspmu.name = "octeon"; | |
| mipspmu.general_event_map = &octeon_event_map; | |
| mipspmu.cache_event_map = &octeon_cache_map; | |
| mipspmu.map_raw_event = octeon_pmu_map_raw_event; | |
| break; | |
| case CPU_BMIPS5000: | |
| mipspmu.name = "BMIPS5000"; | |
| mipspmu.general_event_map = &bmips5000_event_map; | |
| mipspmu.cache_event_map = &bmips5000_cache_map; | |
| break; | |
| case CPU_XLP: | |
| mipspmu.name = "xlp"; | |
| mipspmu.general_event_map = &xlp_event_map; | |
| mipspmu.cache_event_map = &xlp_cache_map; | |
| mipspmu.map_raw_event = xlp_pmu_map_raw_event; | |
| break; | |
| default: | |
| pr_cont("Either hardware does not support performance " | |
| "counters, or not yet implemented.\n"); | |
| return -ENODEV; | |
| } | |
| mipspmu.num_counters = counters; | |
| mipspmu.irq = irq; | |
| if (read_c0_perfctrl0() & M_PERFCTL_WIDE) { | |
| mipspmu.max_period = (1ULL << 63) - 1; | |
| mipspmu.valid_count = (1ULL << 63) - 1; | |
| mipspmu.overflow = 1ULL << 63; | |
| mipspmu.read_counter = mipsxx_pmu_read_counter_64; | |
| mipspmu.write_counter = mipsxx_pmu_write_counter_64; | |
| counter_bits = 64; | |
| } else { | |
| mipspmu.max_period = (1ULL << 31) - 1; | |
| mipspmu.valid_count = (1ULL << 31) - 1; | |
| mipspmu.overflow = 1ULL << 31; | |
| mipspmu.read_counter = mipsxx_pmu_read_counter; | |
| mipspmu.write_counter = mipsxx_pmu_write_counter; | |
| counter_bits = 32; | |
| } | |
| on_each_cpu(reset_counters, (void *)(long)counters, 1); | |
| pr_cont("%s PMU enabled, %d %d-bit counters available to each " | |
| "CPU, irq %d%s\n", mipspmu.name, counters, counter_bits, irq, | |
| irq < 0 ? " (share with timer interrupt)" : ""); | |
| perf_pmu_register(&pmu, "cpu", PERF_TYPE_RAW); | |
| return 0; | |
| } | |
| early_initcall(init_hw_perf_events); |