| /* | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| * | |
| * Copyright (C) 1995 Linus Torvalds | |
| * Copyright (C) 1995 Waldorf Electronics | |
| * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 01, 02, 03 Ralf Baechle | |
| * Copyright (C) 1996 Stoned Elipot | |
| * Copyright (C) 1999 Silicon Graphics, Inc. | |
| * Copyright (C) 2000, 2001, 2002, 2007 Maciej W. Rozycki | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/ioport.h> | |
| #include <linux/export.h> | |
| #include <linux/screen_info.h> | |
| #include <linux/memblock.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/initrd.h> | |
| #include <linux/root_dev.h> | |
| #include <linux/highmem.h> | |
| #include <linux/console.h> | |
| #include <linux/pfn.h> | |
| #include <linux/debugfs.h> | |
| #include <linux/kexec.h> | |
| #include <linux/sizes.h> | |
| #include <linux/device.h> | |
| #include <linux/dma-contiguous.h> | |
| #include <linux/decompress/generic.h> | |
| #include <asm/addrspace.h> | |
| #include <asm/bootinfo.h> | |
| #include <asm/bugs.h> | |
| #include <asm/cache.h> | |
| #include <asm/cdmm.h> | |
| #include <asm/cpu.h> | |
| #include <asm/debug.h> | |
| #include <asm/sections.h> | |
| #include <asm/setup.h> | |
| #include <asm/smp-ops.h> | |
| #include <asm/prom.h> | |
| #ifdef CONFIG_MIPS_ELF_APPENDED_DTB | |
| const char __section(.appended_dtb) __appended_dtb[0x100000]; | |
| #endif /* CONFIG_MIPS_ELF_APPENDED_DTB */ | |
| struct cpuinfo_mips cpu_data[NR_CPUS] __read_mostly; | |
| EXPORT_SYMBOL(cpu_data); | |
| #ifdef CONFIG_VT | |
| struct screen_info screen_info; | |
| #endif | |
| /* | |
| * Setup information | |
| * | |
| * These are initialized so they are in the .data section | |
| */ | |
| unsigned long mips_machtype __read_mostly = MACH_UNKNOWN; | |
| EXPORT_SYMBOL(mips_machtype); | |
| struct boot_mem_map boot_mem_map; | |
| static char __initdata command_line[COMMAND_LINE_SIZE]; | |
| char __initdata arcs_cmdline[COMMAND_LINE_SIZE]; | |
| #ifdef CONFIG_CMDLINE_BOOL | |
| static char __initdata builtin_cmdline[COMMAND_LINE_SIZE] = CONFIG_CMDLINE; | |
| #endif | |
| /* | |
| * mips_io_port_base is the begin of the address space to which x86 style | |
| * I/O ports are mapped. | |
| */ | |
| const unsigned long mips_io_port_base = -1; | |
| EXPORT_SYMBOL(mips_io_port_base); | |
| static struct resource code_resource = { .name = "Kernel code", }; | |
| static struct resource data_resource = { .name = "Kernel data", }; | |
| static void *detect_magic __initdata = detect_memory_region; | |
| void __init add_memory_region(phys_addr_t start, phys_addr_t size, long type) | |
| { | |
| int x = boot_mem_map.nr_map; | |
| int i; | |
| /* | |
| * If the region reaches the top of the physical address space, adjust | |
| * the size slightly so that (start + size) doesn't overflow | |
| */ | |
| if (start + size - 1 == (phys_addr_t)ULLONG_MAX) | |
| --size; | |
| /* Sanity check */ | |
| if (start + size < start) { | |
| pr_warn("Trying to add an invalid memory region, skipped\n"); | |
| return; | |
| } | |
| /* | |
| * Try to merge with existing entry, if any. | |
| */ | |
| for (i = 0; i < boot_mem_map.nr_map; i++) { | |
| struct boot_mem_map_entry *entry = boot_mem_map.map + i; | |
| unsigned long top; | |
| if (entry->type != type) | |
| continue; | |
| if (start + size < entry->addr) | |
| continue; /* no overlap */ | |
| if (entry->addr + entry->size < start) | |
| continue; /* no overlap */ | |
| top = max(entry->addr + entry->size, start + size); | |
| entry->addr = min(entry->addr, start); | |
| entry->size = top - entry->addr; | |
| return; | |
| } | |
| if (boot_mem_map.nr_map == BOOT_MEM_MAP_MAX) { | |
| pr_err("Ooops! Too many entries in the memory map!\n"); | |
| return; | |
| } | |
| boot_mem_map.map[x].addr = start; | |
| boot_mem_map.map[x].size = size; | |
| boot_mem_map.map[x].type = type; | |
| boot_mem_map.nr_map++; | |
| } | |
| void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_addr_t sz_max) | |
| { | |
| void *dm = &detect_magic; | |
| phys_addr_t size; | |
| for (size = sz_min; size < sz_max; size <<= 1) { | |
| if (!memcmp(dm, dm + size, sizeof(detect_magic))) | |
| break; | |
| } | |
| pr_debug("Memory: %lluMB of RAM detected at 0x%llx (min: %lluMB, max: %lluMB)\n", | |
| ((unsigned long long) size) / SZ_1M, | |
| (unsigned long long) start, | |
| ((unsigned long long) sz_min) / SZ_1M, | |
| ((unsigned long long) sz_max) / SZ_1M); | |
| add_memory_region(start, size, BOOT_MEM_RAM); | |
| } | |
| static void __init print_memory_map(void) | |
| { | |
| int i; | |
| const int field = 2 * sizeof(unsigned long); | |
| for (i = 0; i < boot_mem_map.nr_map; i++) { | |
| printk(KERN_INFO " memory: %0*Lx @ %0*Lx ", | |
| field, (unsigned long long) boot_mem_map.map[i].size, | |
| field, (unsigned long long) boot_mem_map.map[i].addr); | |
| switch (boot_mem_map.map[i].type) { | |
| case BOOT_MEM_RAM: | |
| printk(KERN_CONT "(usable)\n"); | |
| break; | |
| case BOOT_MEM_INIT_RAM: | |
| printk(KERN_CONT "(usable after init)\n"); | |
| break; | |
| case BOOT_MEM_ROM_DATA: | |
| printk(KERN_CONT "(ROM data)\n"); | |
| break; | |
| case BOOT_MEM_RESERVED: | |
| printk(KERN_CONT "(reserved)\n"); | |
| break; | |
| default: | |
| printk(KERN_CONT "type %lu\n", boot_mem_map.map[i].type); | |
| break; | |
| } | |
| } | |
| } | |
| /* | |
| * Manage initrd | |
| */ | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| static int __init rd_start_early(char *p) | |
| { | |
| unsigned long start = memparse(p, &p); | |
| #ifdef CONFIG_64BIT | |
| /* Guess if the sign extension was forgotten by bootloader */ | |
| if (start < XKPHYS) | |
| start = (int)start; | |
| #endif | |
| initrd_start = start; | |
| initrd_end += start; | |
| return 0; | |
| } | |
| early_param("rd_start", rd_start_early); | |
| static int __init rd_size_early(char *p) | |
| { | |
| initrd_end += memparse(p, &p); | |
| return 0; | |
| } | |
| early_param("rd_size", rd_size_early); | |
| /* it returns the next free pfn after initrd */ | |
| static unsigned long __init init_initrd(void) | |
| { | |
| unsigned long end; | |
| /* | |
| * Board specific code or command line parser should have | |
| * already set up initrd_start and initrd_end. In these cases | |
| * perfom sanity checks and use them if all looks good. | |
| */ | |
| if (!initrd_start || initrd_end <= initrd_start) | |
| goto disable; | |
| if (initrd_start & ~PAGE_MASK) { | |
| pr_err("initrd start must be page aligned\n"); | |
| goto disable; | |
| } | |
| if (initrd_start < PAGE_OFFSET) { | |
| pr_err("initrd start < PAGE_OFFSET\n"); | |
| goto disable; | |
| } | |
| /* | |
| * Sanitize initrd addresses. For example firmware | |
| * can't guess if they need to pass them through | |
| * 64-bits values if the kernel has been built in pure | |
| * 32-bit. We need also to switch from KSEG0 to XKPHYS | |
| * addresses now, so the code can now safely use __pa(). | |
| */ | |
| end = __pa(initrd_end); | |
| initrd_end = (unsigned long)__va(end); | |
| initrd_start = (unsigned long)__va(__pa(initrd_start)); | |
| ROOT_DEV = Root_RAM0; | |
| return PFN_UP(end); | |
| disable: | |
| initrd_start = 0; | |
| initrd_end = 0; | |
| return 0; | |
| } | |
| /* In some conditions (e.g. big endian bootloader with a little endian | |
| kernel), the initrd might appear byte swapped. Try to detect this and | |
| byte swap it if needed. */ | |
| static void __init maybe_bswap_initrd(void) | |
| { | |
| #if defined(CONFIG_CPU_CAVIUM_OCTEON) | |
| u64 buf; | |
| /* Check for CPIO signature */ | |
| if (!memcmp((void *)initrd_start, "070701", 6)) | |
| return; | |
| /* Check for compressed initrd */ | |
| if (decompress_method((unsigned char *)initrd_start, 8, NULL)) | |
| return; | |
| /* Try again with a byte swapped header */ | |
| buf = swab64p((u64 *)initrd_start); | |
| if (!memcmp(&buf, "070701", 6) || | |
| decompress_method((unsigned char *)(&buf), 8, NULL)) { | |
| unsigned long i; | |
| pr_info("Byteswapped initrd detected\n"); | |
| for (i = initrd_start; i < ALIGN(initrd_end, 8); i += 8) | |
| swab64s((u64 *)i); | |
| } | |
| #endif | |
| } | |
| static void __init finalize_initrd(void) | |
| { | |
| unsigned long size = initrd_end - initrd_start; | |
| if (size == 0) { | |
| printk(KERN_INFO "Initrd not found or empty"); | |
| goto disable; | |
| } | |
| if (__pa(initrd_end) > PFN_PHYS(max_low_pfn)) { | |
| printk(KERN_ERR "Initrd extends beyond end of memory"); | |
| goto disable; | |
| } | |
| maybe_bswap_initrd(); | |
| reserve_bootmem(__pa(initrd_start), size, BOOTMEM_DEFAULT); | |
| initrd_below_start_ok = 1; | |
| pr_info("Initial ramdisk at: 0x%lx (%lu bytes)\n", | |
| initrd_start, size); | |
| return; | |
| disable: | |
| printk(KERN_CONT " - disabling initrd\n"); | |
| initrd_start = 0; | |
| initrd_end = 0; | |
| } | |
| #else /* !CONFIG_BLK_DEV_INITRD */ | |
| static unsigned long __init init_initrd(void) | |
| { | |
| return 0; | |
| } | |
| #define finalize_initrd() do {} while (0) | |
| #endif | |
| /* | |
| * Initialize the bootmem allocator. It also setup initrd related data | |
| * if needed. | |
| */ | |
| #if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON3) && defined(CONFIG_NUMA)) | |
| static void __init bootmem_init(void) | |
| { | |
| init_initrd(); | |
| finalize_initrd(); | |
| } | |
| #else /* !CONFIG_SGI_IP27 */ | |
| static void __init bootmem_init(void) | |
| { | |
| unsigned long reserved_end; | |
| unsigned long mapstart = ~0UL; | |
| unsigned long bootmap_size; | |
| int i; | |
| /* | |
| * Sanity check any INITRD first. We don't take it into account | |
| * for bootmem setup initially, rely on the end-of-kernel-code | |
| * as our memory range starting point. Once bootmem is inited we | |
| * will reserve the area used for the initrd. | |
| */ | |
| init_initrd(); | |
| reserved_end = (unsigned long) PFN_UP(__pa_symbol(&_end)); | |
| /* | |
| * max_low_pfn is not a number of pages. The number of pages | |
| * of the system is given by 'max_low_pfn - min_low_pfn'. | |
| */ | |
| min_low_pfn = ~0UL; | |
| max_low_pfn = 0; | |
| /* | |
| * Find the highest page frame number we have available. | |
| */ | |
| for (i = 0; i < boot_mem_map.nr_map; i++) { | |
| unsigned long start, end; | |
| if (boot_mem_map.map[i].type != BOOT_MEM_RAM) | |
| continue; | |
| start = PFN_UP(boot_mem_map.map[i].addr); | |
| end = PFN_DOWN(boot_mem_map.map[i].addr | |
| + boot_mem_map.map[i].size); | |
| #ifndef CONFIG_HIGHMEM | |
| /* | |
| * Skip highmem here so we get an accurate max_low_pfn if low | |
| * memory stops short of high memory. | |
| * If the region overlaps HIGHMEM_START, end is clipped so | |
| * max_pfn excludes the highmem portion. | |
| */ | |
| if (start >= PFN_DOWN(HIGHMEM_START)) | |
| continue; | |
| if (end > PFN_DOWN(HIGHMEM_START)) | |
| end = PFN_DOWN(HIGHMEM_START); | |
| #endif | |
| if (end > max_low_pfn) | |
| max_low_pfn = end; | |
| if (start < min_low_pfn) | |
| min_low_pfn = start; | |
| if (end <= reserved_end) | |
| continue; | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| /* Skip zones before initrd and initrd itself */ | |
| if (initrd_end && end <= (unsigned long)PFN_UP(__pa(initrd_end))) | |
| continue; | |
| #endif | |
| if (start >= mapstart) | |
| continue; | |
| mapstart = max(reserved_end, start); | |
| } | |
| if (min_low_pfn >= max_low_pfn) | |
| panic("Incorrect memory mapping !!!"); | |
| if (min_low_pfn > ARCH_PFN_OFFSET) { | |
| pr_info("Wasting %lu bytes for tracking %lu unused pages\n", | |
| (min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page), | |
| min_low_pfn - ARCH_PFN_OFFSET); | |
| } else if (min_low_pfn < ARCH_PFN_OFFSET) { | |
| pr_info("%lu free pages won't be used\n", | |
| ARCH_PFN_OFFSET - min_low_pfn); | |
| } | |
| min_low_pfn = ARCH_PFN_OFFSET; | |
| /* | |
| * Determine low and high memory ranges | |
| */ | |
| max_pfn = max_low_pfn; | |
| if (max_low_pfn > PFN_DOWN(HIGHMEM_START)) { | |
| #ifdef CONFIG_HIGHMEM | |
| highstart_pfn = PFN_DOWN(HIGHMEM_START); | |
| highend_pfn = max_low_pfn; | |
| #endif | |
| max_low_pfn = PFN_DOWN(HIGHMEM_START); | |
| } | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| /* | |
| * mapstart should be after initrd_end | |
| */ | |
| if (initrd_end) | |
| mapstart = max(mapstart, (unsigned long)PFN_UP(__pa(initrd_end))); | |
| #endif | |
| /* | |
| * Initialize the boot-time allocator with low memory only. | |
| */ | |
| bootmap_size = init_bootmem_node(NODE_DATA(0), mapstart, | |
| min_low_pfn, max_low_pfn); | |
| for (i = 0; i < boot_mem_map.nr_map; i++) { | |
| unsigned long start, end; | |
| start = PFN_UP(boot_mem_map.map[i].addr); | |
| end = PFN_DOWN(boot_mem_map.map[i].addr | |
| + boot_mem_map.map[i].size); | |
| if (start <= min_low_pfn) | |
| start = min_low_pfn; | |
| if (start >= end) | |
| continue; | |
| #ifndef CONFIG_HIGHMEM | |
| if (end > max_low_pfn) | |
| end = max_low_pfn; | |
| /* | |
| * ... finally, is the area going away? | |
| */ | |
| if (end <= start) | |
| continue; | |
| #endif | |
| memblock_add_node(PFN_PHYS(start), PFN_PHYS(end - start), 0); | |
| } | |
| /* | |
| * Register fully available low RAM pages with the bootmem allocator. | |
| */ | |
| for (i = 0; i < boot_mem_map.nr_map; i++) { | |
| unsigned long start, end, size; | |
| start = PFN_UP(boot_mem_map.map[i].addr); | |
| end = PFN_DOWN(boot_mem_map.map[i].addr | |
| + boot_mem_map.map[i].size); | |
| /* | |
| * Reserve usable memory. | |
| */ | |
| switch (boot_mem_map.map[i].type) { | |
| case BOOT_MEM_RAM: | |
| break; | |
| case BOOT_MEM_INIT_RAM: | |
| memory_present(0, start, end); | |
| continue; | |
| default: | |
| /* Not usable memory */ | |
| continue; | |
| } | |
| /* | |
| * We are rounding up the start address of usable memory | |
| * and at the end of the usable range downwards. | |
| */ | |
| if (start >= max_low_pfn) | |
| continue; | |
| if (start < reserved_end) | |
| start = reserved_end; | |
| if (end > max_low_pfn) | |
| end = max_low_pfn; | |
| /* | |
| * ... finally, is the area going away? | |
| */ | |
| if (end <= start) | |
| continue; | |
| size = end - start; | |
| /* Register lowmem ranges */ | |
| free_bootmem(PFN_PHYS(start), size << PAGE_SHIFT); | |
| memory_present(0, start, end); | |
| } | |
| /* | |
| * Reserve the bootmap memory. | |
| */ | |
| reserve_bootmem(PFN_PHYS(mapstart), bootmap_size, BOOTMEM_DEFAULT); | |
| #ifdef CONFIG_RELOCATABLE | |
| /* | |
| * The kernel reserves all memory below its _end symbol as bootmem, | |
| * but the kernel may now be at a much higher address. The memory | |
| * between the original and new locations may be returned to the system. | |
| */ | |
| if (__pa_symbol(_text) > __pa_symbol(VMLINUX_LOAD_ADDRESS)) { | |
| unsigned long offset; | |
| extern void show_kernel_relocation(const char *level); | |
| offset = __pa_symbol(_text) - __pa_symbol(VMLINUX_LOAD_ADDRESS); | |
| free_bootmem(__pa_symbol(VMLINUX_LOAD_ADDRESS), offset); | |
| #if defined(CONFIG_DEBUG_KERNEL) && defined(CONFIG_DEBUG_INFO) | |
| /* | |
| * This information is necessary when debugging the kernel | |
| * But is a security vulnerability otherwise! | |
| */ | |
| show_kernel_relocation(KERN_INFO); | |
| #endif | |
| } | |
| #endif | |
| /* | |
| * Reserve initrd memory if needed. | |
| */ | |
| finalize_initrd(); | |
| } | |
| #endif /* CONFIG_SGI_IP27 */ | |
| /* | |
| * arch_mem_init - initialize memory management subsystem | |
| * | |
| * o plat_mem_setup() detects the memory configuration and will record detected | |
| * memory areas using add_memory_region. | |
| * | |
| * At this stage the memory configuration of the system is known to the | |
| * kernel but generic memory management system is still entirely uninitialized. | |
| * | |
| * o bootmem_init() | |
| * o sparse_init() | |
| * o paging_init() | |
| * o dma_contiguous_reserve() | |
| * | |
| * At this stage the bootmem allocator is ready to use. | |
| * | |
| * NOTE: historically plat_mem_setup did the entire platform initialization. | |
| * This was rather impractical because it meant plat_mem_setup had to | |
| * get away without any kind of memory allocator. To keep old code from | |
| * breaking plat_setup was just renamed to plat_mem_setup and a second platform | |
| * initialization hook for anything else was introduced. | |
| */ | |
| static int usermem __initdata; | |
| static int __init early_parse_mem(char *p) | |
| { | |
| phys_addr_t start, size; | |
| /* | |
| * If a user specifies memory size, we | |
| * blow away any automatically generated | |
| * size. | |
| */ | |
| if (usermem == 0) { | |
| boot_mem_map.nr_map = 0; | |
| usermem = 1; | |
| } | |
| start = 0; | |
| size = memparse(p, &p); | |
| if (*p == '@') | |
| start = memparse(p + 1, &p); | |
| add_memory_region(start, size, BOOT_MEM_RAM); | |
| return 0; | |
| } | |
| early_param("mem", early_parse_mem); | |
| #ifdef CONFIG_PROC_VMCORE | |
| unsigned long setup_elfcorehdr, setup_elfcorehdr_size; | |
| static int __init early_parse_elfcorehdr(char *p) | |
| { | |
| int i; | |
| setup_elfcorehdr = memparse(p, &p); | |
| for (i = 0; i < boot_mem_map.nr_map; i++) { | |
| unsigned long start = boot_mem_map.map[i].addr; | |
| unsigned long end = (boot_mem_map.map[i].addr + | |
| boot_mem_map.map[i].size); | |
| if (setup_elfcorehdr >= start && setup_elfcorehdr < end) { | |
| /* | |
| * Reserve from the elf core header to the end of | |
| * the memory segment, that should all be kdump | |
| * reserved memory. | |
| */ | |
| setup_elfcorehdr_size = end - setup_elfcorehdr; | |
| break; | |
| } | |
| } | |
| /* | |
| * If we don't find it in the memory map, then we shouldn't | |
| * have to worry about it, as the new kernel won't use it. | |
| */ | |
| return 0; | |
| } | |
| early_param("elfcorehdr", early_parse_elfcorehdr); | |
| #endif | |
| static void __init arch_mem_addpart(phys_addr_t mem, phys_addr_t end, int type) | |
| { | |
| phys_addr_t size; | |
| int i; | |
| size = end - mem; | |
| if (!size) | |
| return; | |
| /* Make sure it is in the boot_mem_map */ | |
| for (i = 0; i < boot_mem_map.nr_map; i++) { | |
| if (mem >= boot_mem_map.map[i].addr && | |
| mem < (boot_mem_map.map[i].addr + | |
| boot_mem_map.map[i].size)) | |
| return; | |
| } | |
| add_memory_region(mem, size, type); | |
| } | |
| #ifdef CONFIG_KEXEC | |
| static inline unsigned long long get_total_mem(void) | |
| { | |
| unsigned long long total; | |
| total = max_pfn - min_low_pfn; | |
| return total << PAGE_SHIFT; | |
| } | |
| static void __init mips_parse_crashkernel(void) | |
| { | |
| unsigned long long total_mem; | |
| unsigned long long crash_size, crash_base; | |
| int ret; | |
| total_mem = get_total_mem(); | |
| ret = parse_crashkernel(boot_command_line, total_mem, | |
| &crash_size, &crash_base); | |
| if (ret != 0 || crash_size <= 0) | |
| return; | |
| crashk_res.start = crash_base; | |
| crashk_res.end = crash_base + crash_size - 1; | |
| } | |
| static void __init request_crashkernel(struct resource *res) | |
| { | |
| int ret; | |
| ret = request_resource(res, &crashk_res); | |
| if (!ret) | |
| pr_info("Reserving %ldMB of memory at %ldMB for crashkernel\n", | |
| (unsigned long)((crashk_res.end - | |
| crashk_res.start + 1) >> 20), | |
| (unsigned long)(crashk_res.start >> 20)); | |
| } | |
| #else /* !defined(CONFIG_KEXEC) */ | |
| static void __init mips_parse_crashkernel(void) | |
| { | |
| } | |
| static void __init request_crashkernel(struct resource *res) | |
| { | |
| } | |
| #endif /* !defined(CONFIG_KEXEC) */ | |
| #define USE_PROM_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER) | |
| #define USE_DTB_CMDLINE IS_ENABLED(CONFIG_MIPS_CMDLINE_FROM_DTB) | |
| #define EXTEND_WITH_PROM IS_ENABLED(CONFIG_MIPS_CMDLINE_DTB_EXTEND) | |
| #define BUILTIN_EXTEND_WITH_PROM \ | |
| IS_ENABLED(CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND) | |
| static void __init arch_mem_init(char **cmdline_p) | |
| { | |
| struct memblock_region *reg; | |
| extern void plat_mem_setup(void); | |
| /* call board setup routine */ | |
| plat_mem_setup(); | |
| /* | |
| * Make sure all kernel memory is in the maps. The "UP" and | |
| * "DOWN" are opposite for initdata since if it crosses over | |
| * into another memory section you don't want that to be | |
| * freed when the initdata is freed. | |
| */ | |
| arch_mem_addpart(PFN_DOWN(__pa_symbol(&_text)) << PAGE_SHIFT, | |
| PFN_UP(__pa_symbol(&_edata)) << PAGE_SHIFT, | |
| BOOT_MEM_RAM); | |
| arch_mem_addpart(PFN_UP(__pa_symbol(&__init_begin)) << PAGE_SHIFT, | |
| PFN_DOWN(__pa_symbol(&__init_end)) << PAGE_SHIFT, | |
| BOOT_MEM_INIT_RAM); | |
| pr_info("Determined physical RAM map:\n"); | |
| print_memory_map(); | |
| #if defined(CONFIG_CMDLINE_BOOL) && defined(CONFIG_CMDLINE_OVERRIDE) | |
| strlcpy(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); | |
| #else | |
| if ((USE_PROM_CMDLINE && arcs_cmdline[0]) || | |
| (USE_DTB_CMDLINE && !boot_command_line[0])) | |
| strlcpy(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); | |
| if (EXTEND_WITH_PROM && arcs_cmdline[0]) { | |
| if (boot_command_line[0]) | |
| strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); | |
| strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); | |
| } | |
| #if defined(CONFIG_CMDLINE_BOOL) | |
| if (builtin_cmdline[0]) { | |
| if (boot_command_line[0]) | |
| strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); | |
| strlcat(boot_command_line, builtin_cmdline, COMMAND_LINE_SIZE); | |
| } | |
| if (BUILTIN_EXTEND_WITH_PROM && arcs_cmdline[0]) { | |
| if (boot_command_line[0]) | |
| strlcat(boot_command_line, " ", COMMAND_LINE_SIZE); | |
| strlcat(boot_command_line, arcs_cmdline, COMMAND_LINE_SIZE); | |
| } | |
| #endif | |
| #endif | |
| strlcpy(command_line, boot_command_line, COMMAND_LINE_SIZE); | |
| *cmdline_p = command_line; | |
| parse_early_param(); | |
| if (usermem) { | |
| pr_info("User-defined physical RAM map:\n"); | |
| print_memory_map(); | |
| } | |
| bootmem_init(); | |
| #ifdef CONFIG_PROC_VMCORE | |
| if (setup_elfcorehdr && setup_elfcorehdr_size) { | |
| printk(KERN_INFO "kdump reserved memory at %lx-%lx\n", | |
| setup_elfcorehdr, setup_elfcorehdr_size); | |
| reserve_bootmem(setup_elfcorehdr, setup_elfcorehdr_size, | |
| BOOTMEM_DEFAULT); | |
| } | |
| #endif | |
| mips_parse_crashkernel(); | |
| #ifdef CONFIG_KEXEC | |
| if (crashk_res.start != crashk_res.end) | |
| reserve_bootmem(crashk_res.start, | |
| crashk_res.end - crashk_res.start + 1, | |
| BOOTMEM_DEFAULT); | |
| #endif | |
| device_tree_init(); | |
| sparse_init(); | |
| plat_swiotlb_setup(); | |
| dma_contiguous_reserve(PFN_PHYS(max_low_pfn)); | |
| /* Tell bootmem about cma reserved memblock section */ | |
| for_each_memblock(reserved, reg) | |
| if (reg->size != 0) | |
| reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT); | |
| reserve_bootmem_region(__pa_symbol(&__nosave_begin), | |
| __pa_symbol(&__nosave_end)); /* Reserve for hibernation */ | |
| } | |
| static void __init resource_init(void) | |
| { | |
| int i; | |
| if (UNCAC_BASE != IO_BASE) | |
| return; | |
| code_resource.start = __pa_symbol(&_text); | |
| code_resource.end = __pa_symbol(&_etext) - 1; | |
| data_resource.start = __pa_symbol(&_etext); | |
| data_resource.end = __pa_symbol(&_edata) - 1; | |
| for (i = 0; i < boot_mem_map.nr_map; i++) { | |
| struct resource *res; | |
| unsigned long start, end; | |
| start = boot_mem_map.map[i].addr; | |
| end = boot_mem_map.map[i].addr + boot_mem_map.map[i].size - 1; | |
| if (start >= HIGHMEM_START) | |
| continue; | |
| if (end >= HIGHMEM_START) | |
| end = HIGHMEM_START - 1; | |
| res = alloc_bootmem(sizeof(struct resource)); | |
| res->start = start; | |
| res->end = end; | |
| res->flags = IORESOURCE_MEM | IORESOURCE_BUSY; | |
| switch (boot_mem_map.map[i].type) { | |
| case BOOT_MEM_RAM: | |
| case BOOT_MEM_INIT_RAM: | |
| case BOOT_MEM_ROM_DATA: | |
| res->name = "System RAM"; | |
| res->flags |= IORESOURCE_SYSRAM; | |
| break; | |
| case BOOT_MEM_RESERVED: | |
| default: | |
| res->name = "reserved"; | |
| } | |
| request_resource(&iomem_resource, res); | |
| /* | |
| * We don't know which RAM region contains kernel data, | |
| * so we try it repeatedly and let the resource manager | |
| * test it. | |
| */ | |
| request_resource(res, &code_resource); | |
| request_resource(res, &data_resource); | |
| request_crashkernel(res); | |
| } | |
| } | |
| #ifdef CONFIG_SMP | |
| static void __init prefill_possible_map(void) | |
| { | |
| int i, possible = num_possible_cpus(); | |
| if (possible > nr_cpu_ids) | |
| possible = nr_cpu_ids; | |
| for (i = 0; i < possible; i++) | |
| set_cpu_possible(i, true); | |
| for (; i < NR_CPUS; i++) | |
| set_cpu_possible(i, false); | |
| nr_cpu_ids = possible; | |
| } | |
| #else | |
| static inline void prefill_possible_map(void) {} | |
| #endif | |
| void __init setup_arch(char **cmdline_p) | |
| { | |
| cpu_probe(); | |
| mips_cm_probe(); | |
| prom_init(); | |
| setup_early_fdc_console(); | |
| #ifdef CONFIG_EARLY_PRINTK | |
| setup_early_printk(); | |
| #endif | |
| cpu_report(); | |
| check_bugs_early(); | |
| #if defined(CONFIG_VT) | |
| #if defined(CONFIG_VGA_CONSOLE) | |
| conswitchp = &vga_con; | |
| #elif defined(CONFIG_DUMMY_CONSOLE) | |
| conswitchp = &dummy_con; | |
| #endif | |
| #endif | |
| arch_mem_init(cmdline_p); | |
| resource_init(); | |
| plat_smp_setup(); | |
| prefill_possible_map(); | |
| cpu_cache_init(); | |
| paging_init(); | |
| } | |
| unsigned long kernelsp[NR_CPUS]; | |
| unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3; | |
| #ifdef CONFIG_USE_OF | |
| unsigned long fw_passed_dtb; | |
| #endif | |
| #ifdef CONFIG_DEBUG_FS | |
| struct dentry *mips_debugfs_dir; | |
| static int __init debugfs_mips(void) | |
| { | |
| struct dentry *d; | |
| d = debugfs_create_dir("mips", NULL); | |
| if (!d) | |
| return -ENOMEM; | |
| mips_debugfs_dir = d; | |
| return 0; | |
| } | |
| arch_initcall(debugfs_mips); | |
| #endif |