| /* | |
| * Copyright 2003-2011 NetLogic Microsystems, Inc. (NetLogic). All rights | |
| * reserved. | |
| * | |
| * This software is available to you under a choice of one of two | |
| * licenses. You may choose to be licensed under the terms of the GNU | |
| * General Public License (GPL) Version 2, available from the file | |
| * COPYING in the main directory of this source tree, or the NetLogic | |
| * license below: | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions | |
| * are met: | |
| * | |
| * 1. Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * 2. Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in | |
| * the documentation and/or other materials provided with the | |
| * distribution. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY NETLOGIC ``AS IS'' AND ANY EXPRESS OR | |
| * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE | |
| * ARE DISCLAIMED. IN NO EVENT SHALL NETLOGIC OR CONTRIBUTORS BE LIABLE | |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR | |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF | |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR | |
| * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, | |
| * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE | |
| * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN | |
| * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| #include <linux/types.h> | |
| #include <linux/pci.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/msi.h> | |
| #include <linux/mm.h> | |
| #include <linux/irq.h> | |
| #include <linux/irqdesc.h> | |
| #include <linux/console.h> | |
| #include <linux/pci_regs.h> | |
| #include <asm/io.h> | |
| #include <asm/netlogic/interrupt.h> | |
| #include <asm/netlogic/haldefs.h> | |
| #include <asm/netlogic/common.h> | |
| #include <asm/netlogic/xlr/msidef.h> | |
| #include <asm/netlogic/xlr/iomap.h> | |
| #include <asm/netlogic/xlr/pic.h> | |
| #include <asm/netlogic/xlr/xlr.h> | |
| static void *pci_config_base; | |
| #define pci_cfg_addr(bus, devfn, off) (((bus) << 16) | ((devfn) << 8) | (off)) | |
| /* PCI ops */ | |
| static inline u32 pci_cfg_read_32bit(struct pci_bus *bus, unsigned int devfn, | |
| int where) | |
| { | |
| u32 data; | |
| u32 *cfgaddr; | |
| cfgaddr = (u32 *)(pci_config_base + | |
| pci_cfg_addr(bus->number, devfn, where & ~3)); | |
| data = *cfgaddr; | |
| return cpu_to_le32(data); | |
| } | |
| static inline void pci_cfg_write_32bit(struct pci_bus *bus, unsigned int devfn, | |
| int where, u32 data) | |
| { | |
| u32 *cfgaddr; | |
| cfgaddr = (u32 *)(pci_config_base + | |
| pci_cfg_addr(bus->number, devfn, where & ~3)); | |
| *cfgaddr = cpu_to_le32(data); | |
| } | |
| static int nlm_pcibios_read(struct pci_bus *bus, unsigned int devfn, | |
| int where, int size, u32 *val) | |
| { | |
| u32 data; | |
| if ((size == 2) && (where & 1)) | |
| return PCIBIOS_BAD_REGISTER_NUMBER; | |
| else if ((size == 4) && (where & 3)) | |
| return PCIBIOS_BAD_REGISTER_NUMBER; | |
| data = pci_cfg_read_32bit(bus, devfn, where); | |
| if (size == 1) | |
| *val = (data >> ((where & 3) << 3)) & 0xff; | |
| else if (size == 2) | |
| *val = (data >> ((where & 3) << 3)) & 0xffff; | |
| else | |
| *val = data; | |
| return PCIBIOS_SUCCESSFUL; | |
| } | |
| static int nlm_pcibios_write(struct pci_bus *bus, unsigned int devfn, | |
| int where, int size, u32 val) | |
| { | |
| u32 data; | |
| if ((size == 2) && (where & 1)) | |
| return PCIBIOS_BAD_REGISTER_NUMBER; | |
| else if ((size == 4) && (where & 3)) | |
| return PCIBIOS_BAD_REGISTER_NUMBER; | |
| data = pci_cfg_read_32bit(bus, devfn, where); | |
| if (size == 1) | |
| data = (data & ~(0xff << ((where & 3) << 3))) | | |
| (val << ((where & 3) << 3)); | |
| else if (size == 2) | |
| data = (data & ~(0xffff << ((where & 3) << 3))) | | |
| (val << ((where & 3) << 3)); | |
| else | |
| data = val; | |
| pci_cfg_write_32bit(bus, devfn, where, data); | |
| return PCIBIOS_SUCCESSFUL; | |
| } | |
| struct pci_ops nlm_pci_ops = { | |
| .read = nlm_pcibios_read, | |
| .write = nlm_pcibios_write | |
| }; | |
| static struct resource nlm_pci_mem_resource = { | |
| .name = "XLR PCI MEM", | |
| .start = 0xd0000000UL, /* 256MB PCI mem @ 0xd000_0000 */ | |
| .end = 0xdfffffffUL, | |
| .flags = IORESOURCE_MEM, | |
| }; | |
| static struct resource nlm_pci_io_resource = { | |
| .name = "XLR IO MEM", | |
| .start = 0x10000000UL, /* 16MB PCI IO @ 0x1000_0000 */ | |
| .end = 0x100fffffUL, | |
| .flags = IORESOURCE_IO, | |
| }; | |
| struct pci_controller nlm_pci_controller = { | |
| .index = 0, | |
| .pci_ops = &nlm_pci_ops, | |
| .mem_resource = &nlm_pci_mem_resource, | |
| .mem_offset = 0x00000000UL, | |
| .io_resource = &nlm_pci_io_resource, | |
| .io_offset = 0x00000000UL, | |
| }; | |
| /* | |
| * The top level PCIe links on the XLS PCIe controller appear as | |
| * bridges. Given a device, this function finds which link it is | |
| * on. | |
| */ | |
| static struct pci_dev *xls_get_pcie_link(const struct pci_dev *dev) | |
| { | |
| struct pci_bus *bus, *p; | |
| /* Find the bridge on bus 0 */ | |
| bus = dev->bus; | |
| for (p = bus->parent; p && p->number != 0; p = p->parent) | |
| bus = p; | |
| return p ? bus->self : NULL; | |
| } | |
| static int nlm_pci_link_to_irq(int link) | |
| { | |
| switch (link) { | |
| case 0: | |
| return PIC_PCIE_LINK0_IRQ; | |
| case 1: | |
| return PIC_PCIE_LINK1_IRQ; | |
| case 2: | |
| if (nlm_chip_is_xls_b()) | |
| return PIC_PCIE_XLSB0_LINK2_IRQ; | |
| else | |
| return PIC_PCIE_LINK2_IRQ; | |
| case 3: | |
| if (nlm_chip_is_xls_b()) | |
| return PIC_PCIE_XLSB0_LINK3_IRQ; | |
| else | |
| return PIC_PCIE_LINK3_IRQ; | |
| } | |
| WARN(1, "Unexpected link %d\n", link); | |
| return 0; | |
| } | |
| static int get_irq_vector(const struct pci_dev *dev) | |
| { | |
| struct pci_dev *lnk; | |
| int link; | |
| if (!nlm_chip_is_xls()) | |
| return PIC_PCIX_IRQ; /* for XLR just one IRQ */ | |
| lnk = xls_get_pcie_link(dev); | |
| if (lnk == NULL) | |
| return 0; | |
| link = PCI_SLOT(lnk->devfn); | |
| return nlm_pci_link_to_irq(link); | |
| } | |
| #ifdef CONFIG_PCI_MSI | |
| void arch_teardown_msi_irq(unsigned int irq) | |
| { | |
| } | |
| int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) | |
| { | |
| struct msi_msg msg; | |
| struct pci_dev *lnk; | |
| int irq, ret; | |
| u16 val; | |
| /* MSI not supported on XLR */ | |
| if (!nlm_chip_is_xls()) | |
| return 1; | |
| /* | |
| * Enable MSI on the XLS PCIe controller bridge which was disabled | |
| * at enumeration, the bridge MSI capability is at 0x50 | |
| */ | |
| lnk = xls_get_pcie_link(dev); | |
| if (lnk == NULL) | |
| return 1; | |
| pci_read_config_word(lnk, 0x50 + PCI_MSI_FLAGS, &val); | |
| if ((val & PCI_MSI_FLAGS_ENABLE) == 0) { | |
| val |= PCI_MSI_FLAGS_ENABLE; | |
| pci_write_config_word(lnk, 0x50 + PCI_MSI_FLAGS, val); | |
| } | |
| irq = get_irq_vector(dev); | |
| if (irq <= 0) | |
| return 1; | |
| msg.address_hi = MSI_ADDR_BASE_HI; | |
| msg.address_lo = MSI_ADDR_BASE_LO | | |
| MSI_ADDR_DEST_MODE_PHYSICAL | | |
| MSI_ADDR_REDIRECTION_CPU; | |
| msg.data = MSI_DATA_TRIGGER_EDGE | | |
| MSI_DATA_LEVEL_ASSERT | | |
| MSI_DATA_DELIVERY_FIXED; | |
| ret = irq_set_msi_desc(irq, desc); | |
| if (ret < 0) | |
| return ret; | |
| pci_write_msi_msg(irq, &msg); | |
| return 0; | |
| } | |
| #endif | |
| /* Extra ACK needed for XLR on chip PCI controller */ | |
| static void xlr_pci_ack(struct irq_data *d) | |
| { | |
| uint64_t pcibase = nlm_mmio_base(NETLOGIC_IO_PCIX_OFFSET); | |
| nlm_read_reg(pcibase, (0x140 >> 2)); | |
| } | |
| /* Extra ACK needed for XLS on chip PCIe controller */ | |
| static void xls_pcie_ack(struct irq_data *d) | |
| { | |
| uint64_t pciebase_le = nlm_mmio_base(NETLOGIC_IO_PCIE_1_OFFSET); | |
| switch (d->irq) { | |
| case PIC_PCIE_LINK0_IRQ: | |
| nlm_write_reg(pciebase_le, (0x90 >> 2), 0xffffffff); | |
| break; | |
| case PIC_PCIE_LINK1_IRQ: | |
| nlm_write_reg(pciebase_le, (0x94 >> 2), 0xffffffff); | |
| break; | |
| case PIC_PCIE_LINK2_IRQ: | |
| nlm_write_reg(pciebase_le, (0x190 >> 2), 0xffffffff); | |
| break; | |
| case PIC_PCIE_LINK3_IRQ: | |
| nlm_write_reg(pciebase_le, (0x194 >> 2), 0xffffffff); | |
| break; | |
| } | |
| } | |
| /* For XLS B silicon, the 3,4 PCI interrupts are different */ | |
| static void xls_pcie_ack_b(struct irq_data *d) | |
| { | |
| uint64_t pciebase_le = nlm_mmio_base(NETLOGIC_IO_PCIE_1_OFFSET); | |
| switch (d->irq) { | |
| case PIC_PCIE_LINK0_IRQ: | |
| nlm_write_reg(pciebase_le, (0x90 >> 2), 0xffffffff); | |
| break; | |
| case PIC_PCIE_LINK1_IRQ: | |
| nlm_write_reg(pciebase_le, (0x94 >> 2), 0xffffffff); | |
| break; | |
| case PIC_PCIE_XLSB0_LINK2_IRQ: | |
| nlm_write_reg(pciebase_le, (0x190 >> 2), 0xffffffff); | |
| break; | |
| case PIC_PCIE_XLSB0_LINK3_IRQ: | |
| nlm_write_reg(pciebase_le, (0x194 >> 2), 0xffffffff); | |
| break; | |
| } | |
| } | |
| int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) | |
| { | |
| return get_irq_vector(dev); | |
| } | |
| /* Do platform specific device initialization at pci_enable_device() time */ | |
| int pcibios_plat_dev_init(struct pci_dev *dev) | |
| { | |
| return 0; | |
| } | |
| static int __init pcibios_init(void) | |
| { | |
| void (*extra_ack)(struct irq_data *); | |
| int link, irq; | |
| /* PSB assigns PCI resources */ | |
| pci_set_flags(PCI_PROBE_ONLY); | |
| pci_config_base = ioremap(DEFAULT_PCI_CONFIG_BASE, 16 << 20); | |
| /* Extend IO port for memory mapped io */ | |
| ioport_resource.start = 0; | |
| ioport_resource.end = ~0; | |
| set_io_port_base(CKSEG1); | |
| nlm_pci_controller.io_map_base = CKSEG1; | |
| pr_info("Registering XLR/XLS PCIX/PCIE Controller.\n"); | |
| register_pci_controller(&nlm_pci_controller); | |
| /* | |
| * For PCI interrupts, we need to ack the PCI controller too, overload | |
| * irq handler data to do this | |
| */ | |
| if (!nlm_chip_is_xls()) { | |
| /* XLR PCI controller ACK */ | |
| nlm_set_pic_extra_ack(0, PIC_PCIX_IRQ, xlr_pci_ack); | |
| } else { | |
| if (nlm_chip_is_xls_b()) | |
| extra_ack = xls_pcie_ack_b; | |
| else | |
| extra_ack = xls_pcie_ack; | |
| for (link = 0; link < 4; link++) { | |
| irq = nlm_pci_link_to_irq(link); | |
| nlm_set_pic_extra_ack(0, irq, extra_ack); | |
| } | |
| } | |
| return 0; | |
| } | |
| arch_initcall(pcibios_init); |