| /* | |
| * Copyright 2010 PMC-Sierra, Inc, derived from irq_cpu.c | |
| * | |
| * This file define the irq handler for MSP PER subsystem interrupts. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| #include <linux/init.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/kernel.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/bitops.h> | |
| #include <asm/mipsregs.h> | |
| #include <msp_cic_int.h> | |
| #include <msp_regs.h> | |
| /* | |
| * Convenience Macro. Should be somewhere generic. | |
| */ | |
| #define get_current_vpe() \ | |
| ((read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE) | |
| #ifdef CONFIG_SMP | |
| /* | |
| * The PER registers must be protected from concurrent access. | |
| */ | |
| static DEFINE_SPINLOCK(per_lock); | |
| #endif | |
| /* ensure writes to per are completed */ | |
| static inline void per_wmb(void) | |
| { | |
| const volatile void __iomem *per_mem = PER_INT_MSK_REG; | |
| volatile u32 dummy_read; | |
| wmb(); | |
| dummy_read = __raw_readl(per_mem); | |
| dummy_read++; | |
| } | |
| static inline void unmask_per_irq(struct irq_data *d) | |
| { | |
| #ifdef CONFIG_SMP | |
| unsigned long flags; | |
| spin_lock_irqsave(&per_lock, flags); | |
| *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE)); | |
| spin_unlock_irqrestore(&per_lock, flags); | |
| #else | |
| *PER_INT_MSK_REG |= (1 << (d->irq - MSP_PER_INTBASE)); | |
| #endif | |
| per_wmb(); | |
| } | |
| static inline void mask_per_irq(struct irq_data *d) | |
| { | |
| #ifdef CONFIG_SMP | |
| unsigned long flags; | |
| spin_lock_irqsave(&per_lock, flags); | |
| *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE)); | |
| spin_unlock_irqrestore(&per_lock, flags); | |
| #else | |
| *PER_INT_MSK_REG &= ~(1 << (d->irq - MSP_PER_INTBASE)); | |
| #endif | |
| per_wmb(); | |
| } | |
| static inline void msp_per_irq_ack(struct irq_data *d) | |
| { | |
| mask_per_irq(d); | |
| /* | |
| * In the PER interrupt controller, only bits 11 and 10 | |
| * are write-to-clear, (SPI TX complete, SPI RX complete). | |
| * It does nothing for any others. | |
| */ | |
| *PER_INT_STS_REG = (1 << (d->irq - MSP_PER_INTBASE)); | |
| } | |
| #ifdef CONFIG_SMP | |
| static int msp_per_irq_set_affinity(struct irq_data *d, | |
| const struct cpumask *affinity, bool force) | |
| { | |
| /* WTF is this doing ????? */ | |
| unmask_per_irq(d); | |
| return 0; | |
| } | |
| #endif | |
| static struct irq_chip msp_per_irq_controller = { | |
| .name = "MSP_PER", | |
| .irq_enable = unmask_per_irq, | |
| .irq_disable = mask_per_irq, | |
| .irq_ack = msp_per_irq_ack, | |
| #ifdef CONFIG_SMP | |
| .irq_set_affinity = msp_per_irq_set_affinity, | |
| #endif | |
| }; | |
| void __init msp_per_irq_init(void) | |
| { | |
| int i; | |
| /* Mask/clear interrupts. */ | |
| *PER_INT_MSK_REG = 0x00000000; | |
| *PER_INT_STS_REG = 0xFFFFFFFF; | |
| /* initialize all the IRQ descriptors */ | |
| for (i = MSP_PER_INTBASE; i < MSP_PER_INTBASE + 32; i++) { | |
| irq_set_chip(i, &msp_per_irq_controller); | |
| } | |
| } | |
| void msp_per_irq_dispatch(void) | |
| { | |
| u32 per_mask = *PER_INT_MSK_REG; | |
| u32 per_status = *PER_INT_STS_REG; | |
| u32 pending; | |
| pending = per_status & per_mask; | |
| if (pending) { | |
| do_IRQ(ffs(pending) + MSP_PER_INTBASE - 1); | |
| } else { | |
| spurious_interrupt(); | |
| } | |
| } |