| /* MN10300 Miscellaneous helper routines for kernel decompressor | |
| * | |
| * Copyright (C) 2007 Matsushita Electric Industrial Co., Ltd. | |
| * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved. | |
| * Modified by David Howells (dhowells@redhat.com) | |
| * - Derived from arch/x86/boot/compressed/misc_32.c | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public Licence | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the Licence, or (at your option) any later version. | |
| */ | |
| #include <linux/compiler.h> | |
| #include <asm/serial-regs.h> | |
| #include "misc.h" | |
| #ifndef CONFIG_GDBSTUB_ON_TTYSx | |
| /* display 'Uncompressing Linux... ' messages on ttyS0 or ttyS1 */ | |
| #if 1 /* ttyS0 */ | |
| #define CYG_DEV_BASE 0xA6FB0000 | |
| #else /* ttyS1 */ | |
| #define CYG_DEV_BASE 0xA6FC0000 | |
| #endif | |
| #define CYG_DEV_THR (*((volatile __u8*)(CYG_DEV_BASE + 0x00))) | |
| #define CYG_DEV_MCR (*((volatile __u8*)(CYG_DEV_BASE + 0x10))) | |
| #define SIO_MCR_DTR 0x01 | |
| #define SIO_MCR_RTS 0x02 | |
| #define CYG_DEV_LSR (*((volatile __u8*)(CYG_DEV_BASE + 0x14))) | |
| #define SIO_LSR_THRE 0x20 /* transmitter holding register empty */ | |
| #define SIO_LSR_TEMT 0x40 /* transmitter register empty */ | |
| #define CYG_DEV_MSR (*((volatile __u8*)(CYG_DEV_BASE + 0x18))) | |
| #define SIO_MSR_CTS 0x10 /* clear to send */ | |
| #define SIO_MSR_DSR 0x20 /* data set ready */ | |
| #define LSR_WAIT_FOR(STATE) \ | |
| do { while (!(CYG_DEV_LSR & SIO_LSR_##STATE)) {} } while (0) | |
| #define FLOWCTL_QUERY(LINE) \ | |
| ({ CYG_DEV_MSR & SIO_MSR_##LINE; }) | |
| #define FLOWCTL_WAIT_FOR(LINE) \ | |
| do { while (!(CYG_DEV_MSR & SIO_MSR_##LINE)) {} } while (0) | |
| #define FLOWCTL_CLEAR(LINE) \ | |
| do { CYG_DEV_MCR &= ~SIO_MCR_##LINE; } while (0) | |
| #define FLOWCTL_SET(LINE) \ | |
| do { CYG_DEV_MCR |= SIO_MCR_##LINE; } while (0) | |
| #endif | |
| /* | |
| * gzip declarations | |
| */ | |
| #define OF(args) args | |
| #define STATIC static | |
| #undef memset | |
| #undef memcpy | |
| static inline void *memset(const void *s, int c, size_t n) | |
| { | |
| int i; | |
| char *ss = (char *) s; | |
| for (i = 0; i < n; i++) | |
| ss[i] = c; | |
| return (void *)s; | |
| } | |
| #define memzero(s, n) memset((s), 0, (n)) | |
| static inline void *memcpy(void *__dest, const void *__src, size_t __n) | |
| { | |
| int i; | |
| const char *s = __src; | |
| char *d = __dest; | |
| for (i = 0; i < __n; i++) | |
| d[i] = s[i]; | |
| return __dest; | |
| } | |
| typedef unsigned char uch; | |
| typedef unsigned short ush; | |
| typedef unsigned long ulg; | |
| #define WSIZE 0x8000 /* Window size must be at least 32k, and a power of | |
| * two */ | |
| static uch *inbuf; /* input buffer */ | |
| static uch window[WSIZE]; /* sliding window buffer */ | |
| static unsigned insize; /* valid bytes in inbuf */ | |
| static unsigned inptr; /* index of next byte to be processed in inbuf */ | |
| static unsigned outcnt; /* bytes in output buffer */ | |
| /* gzip flag byte */ | |
| #define ASCII_FLAG 0x01 /* bit 0 set: file probably ASCII text */ | |
| #define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */ | |
| #define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */ | |
| #define ORIG_NAME 0x08 /* bit 3 set: original file name present */ | |
| #define COMMENT 0x10 /* bit 4 set: file comment present */ | |
| #define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */ | |
| #define RESERVED 0xC0 /* bit 6,7: reserved */ | |
| /* Diagnostic functions */ | |
| #ifdef DEBUG | |
| # define Assert(cond, msg) { if (!(cond)) error(msg); } | |
| # define Trace(x) fprintf x | |
| # define Tracev(x) { if (verbose) fprintf x ; } | |
| # define Tracevv(x) { if (verbose > 1) fprintf x ; } | |
| # define Tracec(c, x) { if (verbose && (c)) fprintf x ; } | |
| # define Tracecv(c, x) { if (verbose > 1 && (c)) fprintf x ; } | |
| #else | |
| # define Assert(cond, msg) | |
| # define Trace(x) | |
| # define Tracev(x) | |
| # define Tracevv(x) | |
| # define Tracec(c, x) | |
| # define Tracecv(c, x) | |
| #endif | |
| static int fill_inbuf(void); | |
| static void flush_window(void); | |
| static void error(const char *) __attribute__((noreturn)); | |
| static void kputs(const char *); | |
| static inline unsigned char get_byte(void) | |
| { | |
| unsigned char ch = inptr < insize ? inbuf[inptr++] : fill_inbuf(); | |
| #if 0 | |
| char hex[3]; | |
| hex[0] = ((ch & 0x0f) > 9) ? | |
| ((ch & 0x0f) + 'A' - 0xa) : ((ch & 0x0f) + '0'); | |
| hex[1] = ((ch >> 4) > 9) ? | |
| ((ch >> 4) + 'A' - 0xa) : ((ch >> 4) + '0'); | |
| hex[2] = 0; | |
| kputs(hex); | |
| #endif | |
| return ch; | |
| } | |
| /* | |
| * This is set up by the setup-routine at boot-time | |
| */ | |
| #define EXT_MEM_K (*(unsigned short *)0x90002) | |
| #ifndef STANDARD_MEMORY_BIOS_CALL | |
| #define ALT_MEM_K (*(unsigned long *) 0x901e0) | |
| #endif | |
| #define SCREEN_INFO (*(struct screen_info *)0x90000) | |
| static long bytes_out; | |
| static uch *output_data; | |
| static unsigned long output_ptr; | |
| static unsigned long free_mem_ptr = (unsigned long) &end; | |
| static unsigned long free_mem_end_ptr = (unsigned long) &end + 0x90000; | |
| #define INPLACE_MOVE_ROUTINE 0x1000 | |
| #define LOW_BUFFER_START 0x2000 | |
| #define LOW_BUFFER_END 0x90000 | |
| #define LOW_BUFFER_SIZE (LOW_BUFFER_END - LOW_BUFFER_START) | |
| #define HEAP_SIZE 0x3000 | |
| static int high_loaded; | |
| static uch *high_buffer_start /* = (uch *)(((ulg)&end) + HEAP_SIZE)*/; | |
| static char *vidmem = (char *)0xb8000; | |
| static int lines, cols; | |
| #define BOOTLOADER_INFLATE | |
| #include "../../../../lib/inflate.c" | |
| static inline void scroll(void) | |
| { | |
| int i; | |
| memcpy(vidmem, vidmem + cols * 2, (lines - 1) * cols * 2); | |
| for (i = (lines - 1) * cols * 2; i < lines * cols * 2; i += 2) | |
| vidmem[i] = ' '; | |
| } | |
| static inline void kputchar(unsigned char ch) | |
| { | |
| #ifdef CONFIG_MN10300_UNIT_ASB2305 | |
| while (SC0STR & SC01STR_TBF) | |
| continue; | |
| if (ch == 0x0a) { | |
| SC0TXB = 0x0d; | |
| while (SC0STR & SC01STR_TBF) | |
| continue; | |
| } | |
| SC0TXB = ch; | |
| #else | |
| while (SC1STR & SC01STR_TBF) | |
| continue; | |
| if (ch == 0x0a) { | |
| SC1TXB = 0x0d; | |
| while (SC1STR & SC01STR_TBF) | |
| continue; | |
| } | |
| SC1TXB = ch; | |
| #endif | |
| } | |
| static void kputs(const char *s) | |
| { | |
| #ifdef CONFIG_DEBUG_DECOMPRESS_KERNEL | |
| #ifndef CONFIG_GDBSTUB_ON_TTYSx | |
| char ch; | |
| FLOWCTL_SET(DTR); | |
| while (*s) { | |
| LSR_WAIT_FOR(THRE); | |
| ch = *s++; | |
| if (ch == 0x0a) { | |
| CYG_DEV_THR = 0x0d; | |
| LSR_WAIT_FOR(THRE); | |
| } | |
| CYG_DEV_THR = ch; | |
| } | |
| FLOWCTL_CLEAR(DTR); | |
| #else | |
| for (; *s; s++) | |
| kputchar(*s); | |
| #endif | |
| #endif /* CONFIG_DEBUG_DECOMPRESS_KERNEL */ | |
| } | |
| /* =========================================================================== | |
| * Fill the input buffer. This is called only when the buffer is empty | |
| * and at least one byte is really needed. | |
| */ | |
| static int fill_inbuf() | |
| { | |
| if (insize != 0) | |
| error("ran out of input data\n"); | |
| inbuf = input_data; | |
| insize = input_len; | |
| inptr = 1; | |
| return inbuf[0]; | |
| } | |
| /* =========================================================================== | |
| * Write the output window window[0..outcnt-1] and update crc and bytes_out. | |
| * (Used for the decompressed data only.) | |
| */ | |
| static void flush_window_low(void) | |
| { | |
| ulg c = crc; /* temporary variable */ | |
| unsigned n; | |
| uch *in, *out, ch; | |
| in = window; | |
| out = &output_data[output_ptr]; | |
| for (n = 0; n < outcnt; n++) { | |
| ch = *out++ = *in++; | |
| c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); | |
| } | |
| crc = c; | |
| bytes_out += (ulg)outcnt; | |
| output_ptr += (ulg)outcnt; | |
| outcnt = 0; | |
| } | |
| static void flush_window_high(void) | |
| { | |
| ulg c = crc; /* temporary variable */ | |
| unsigned n; | |
| uch *in, ch; | |
| in = window; | |
| for (n = 0; n < outcnt; n++) { | |
| ch = *output_data++ = *in++; | |
| if ((ulg) output_data == LOW_BUFFER_END) | |
| output_data = high_buffer_start; | |
| c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8); | |
| } | |
| crc = c; | |
| bytes_out += (ulg)outcnt; | |
| outcnt = 0; | |
| } | |
| static void flush_window(void) | |
| { | |
| if (high_loaded) | |
| flush_window_high(); | |
| else | |
| flush_window_low(); | |
| } | |
| static void error(const char *x) | |
| { | |
| kputs("\n\n"); | |
| kputs(x); | |
| kputs("\n\n -- System halted"); | |
| while (1) | |
| /* Halt */; | |
| } | |
| #define STACK_SIZE (4096) | |
| long user_stack[STACK_SIZE]; | |
| struct { | |
| long *a; | |
| short b; | |
| } stack_start = { &user_stack[STACK_SIZE], 0 }; | |
| void setup_normal_output_buffer(void) | |
| { | |
| #ifdef STANDARD_MEMORY_BIOS_CALL | |
| if (EXT_MEM_K < 1024) | |
| error("Less than 2MB of memory.\n"); | |
| #else | |
| if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < 1024) | |
| error("Less than 2MB of memory.\n"); | |
| #endif | |
| output_data = (char *) 0x100000; /* Points to 1M */ | |
| } | |
| struct moveparams { | |
| uch *low_buffer_start; | |
| int lcount; | |
| uch *high_buffer_start; | |
| int hcount; | |
| }; | |
| void setup_output_buffer_if_we_run_high(struct moveparams *mv) | |
| { | |
| high_buffer_start = (uch *)(((ulg) &end) + HEAP_SIZE); | |
| #ifdef STANDARD_MEMORY_BIOS_CALL | |
| if (EXT_MEM_K < (3 * 1024)) | |
| error("Less than 4MB of memory.\n"); | |
| #else | |
| if ((ALT_MEM_K > EXT_MEM_K ? ALT_MEM_K : EXT_MEM_K) < (3 * 1024)) | |
| error("Less than 4MB of memory.\n"); | |
| #endif | |
| mv->low_buffer_start = output_data = (char *) LOW_BUFFER_START; | |
| high_loaded = 1; | |
| free_mem_end_ptr = (long) high_buffer_start; | |
| if (0x100000 + LOW_BUFFER_SIZE > (ulg) high_buffer_start) { | |
| high_buffer_start = (uch *)(0x100000 + LOW_BUFFER_SIZE); | |
| mv->hcount = 0; /* say: we need not to move high_buffer */ | |
| } else { | |
| mv->hcount = -1; | |
| } | |
| mv->high_buffer_start = high_buffer_start; | |
| } | |
| void close_output_buffer_if_we_run_high(struct moveparams *mv) | |
| { | |
| mv->lcount = bytes_out; | |
| if (bytes_out > LOW_BUFFER_SIZE) { | |
| mv->lcount = LOW_BUFFER_SIZE; | |
| if (mv->hcount) | |
| mv->hcount = bytes_out - LOW_BUFFER_SIZE; | |
| } else { | |
| mv->hcount = 0; | |
| } | |
| } | |
| #undef DEBUGFLAG | |
| #ifdef DEBUGFLAG | |
| int debugflag; | |
| #endif | |
| int decompress_kernel(struct moveparams *mv) | |
| { | |
| #ifdef DEBUGFLAG | |
| while (!debugflag) | |
| barrier(); | |
| #endif | |
| output_data = (char *) CONFIG_KERNEL_TEXT_ADDRESS; | |
| makecrc(); | |
| kputs("Uncompressing Linux... "); | |
| gunzip(); | |
| kputs("Ok, booting the kernel.\n"); | |
| return 0; | |
| } |