| /* SMP support routines. | |
| * | |
| * Copyright (C) 2006-2008 Panasonic Corporation | |
| * All Rights Reserved. | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * version 2 as published by the Free Software Foundation. | |
| * | |
| * This program is distributed in the hope that it will be useful, | |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| * GNU General Public License for more details. | |
| */ | |
| #include <linux/interrupt.h> | |
| #include <linux/spinlock.h> | |
| #include <linux/init.h> | |
| #include <linux/jiffies.h> | |
| #include <linux/cpumask.h> | |
| #include <linux/err.h> | |
| #include <linux/kernel.h> | |
| #include <linux/delay.h> | |
| #include <linux/sched.h> | |
| #include <linux/profile.h> | |
| #include <linux/smp.h> | |
| #include <linux/cpu.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/bitops.h> | |
| #include <asm/processor.h> | |
| #include <asm/bug.h> | |
| #include <asm/exceptions.h> | |
| #include <asm/hardirq.h> | |
| #include <asm/fpu.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/thread_info.h> | |
| #include <asm/cpu-regs.h> | |
| #include <asm/intctl-regs.h> | |
| #include "internal.h" | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| #include <asm/cacheflush.h> | |
| static unsigned long sleep_mode[NR_CPUS]; | |
| static void run_sleep_cpu(unsigned int cpu); | |
| static void run_wakeup_cpu(unsigned int cpu); | |
| #endif /* CONFIG_HOTPLUG_CPU */ | |
| /* | |
| * Debug Message function | |
| */ | |
| #undef DEBUG_SMP | |
| #ifdef DEBUG_SMP | |
| #define Dprintk(fmt, ...) printk(KERN_DEBUG fmt, ##__VA_ARGS__) | |
| #else | |
| #define Dprintk(fmt, ...) no_printk(KERN_DEBUG fmt, ##__VA_ARGS__) | |
| #endif | |
| /* timeout value in msec for smp_nmi_call_function. zero is no timeout. */ | |
| #define CALL_FUNCTION_NMI_IPI_TIMEOUT 0 | |
| /* | |
| * Structure and data for smp_nmi_call_function(). | |
| */ | |
| struct nmi_call_data_struct { | |
| smp_call_func_t func; | |
| void *info; | |
| cpumask_t started; | |
| cpumask_t finished; | |
| int wait; | |
| char size_alignment[0] | |
| __attribute__ ((__aligned__(SMP_CACHE_BYTES))); | |
| } __attribute__ ((__aligned__(SMP_CACHE_BYTES))); | |
| static DEFINE_SPINLOCK(smp_nmi_call_lock); | |
| static struct nmi_call_data_struct *nmi_call_data; | |
| /* | |
| * Data structures and variables | |
| */ | |
| static cpumask_t cpu_callin_map; /* Bitmask of callin CPUs */ | |
| static cpumask_t cpu_callout_map; /* Bitmask of callout CPUs */ | |
| cpumask_t cpu_boot_map; /* Bitmask of boot APs */ | |
| unsigned long start_stack[NR_CPUS - 1]; | |
| /* | |
| * Per CPU parameters | |
| */ | |
| struct mn10300_cpuinfo cpu_data[NR_CPUS] __cacheline_aligned; | |
| static int cpucount; /* The count of boot CPUs */ | |
| static cpumask_t smp_commenced_mask; | |
| cpumask_t cpu_initialized __initdata = CPU_MASK_NONE; | |
| /* | |
| * Function Prototypes | |
| */ | |
| static int do_boot_cpu(int); | |
| static void smp_show_cpu_info(int cpu_id); | |
| static void smp_callin(void); | |
| static void smp_online(void); | |
| static void smp_store_cpu_info(int); | |
| static void smp_cpu_init(void); | |
| static void smp_tune_scheduling(void); | |
| static void send_IPI_mask(const cpumask_t *cpumask, int irq); | |
| static void init_ipi(void); | |
| /* | |
| * IPI Initialization interrupt definitions | |
| */ | |
| static void mn10300_ipi_disable(unsigned int irq); | |
| static void mn10300_ipi_enable(unsigned int irq); | |
| static void mn10300_ipi_chip_disable(struct irq_data *d); | |
| static void mn10300_ipi_chip_enable(struct irq_data *d); | |
| static void mn10300_ipi_ack(struct irq_data *d); | |
| static void mn10300_ipi_nop(struct irq_data *d); | |
| static struct irq_chip mn10300_ipi_type = { | |
| .name = "cpu_ipi", | |
| .irq_disable = mn10300_ipi_chip_disable, | |
| .irq_enable = mn10300_ipi_chip_enable, | |
| .irq_ack = mn10300_ipi_ack, | |
| .irq_eoi = mn10300_ipi_nop | |
| }; | |
| static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id); | |
| static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id); | |
| static struct irqaction reschedule_ipi = { | |
| .handler = smp_reschedule_interrupt, | |
| .flags = IRQF_NOBALANCING, | |
| .name = "smp reschedule IPI" | |
| }; | |
| static struct irqaction call_function_ipi = { | |
| .handler = smp_call_function_interrupt, | |
| .flags = IRQF_NOBALANCING, | |
| .name = "smp call function IPI" | |
| }; | |
| #if !defined(CONFIG_GENERIC_CLOCKEVENTS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) | |
| static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id); | |
| static struct irqaction local_timer_ipi = { | |
| .handler = smp_ipi_timer_interrupt, | |
| .flags = IRQF_NOBALANCING, | |
| .name = "smp local timer IPI" | |
| }; | |
| #endif | |
| /** | |
| * init_ipi - Initialise the IPI mechanism | |
| */ | |
| static void init_ipi(void) | |
| { | |
| unsigned long flags; | |
| u16 tmp16; | |
| /* set up the reschedule IPI */ | |
| irq_set_chip_and_handler(RESCHEDULE_IPI, &mn10300_ipi_type, | |
| handle_percpu_irq); | |
| setup_irq(RESCHEDULE_IPI, &reschedule_ipi); | |
| set_intr_level(RESCHEDULE_IPI, RESCHEDULE_GxICR_LV); | |
| mn10300_ipi_enable(RESCHEDULE_IPI); | |
| /* set up the call function IPI */ | |
| irq_set_chip_and_handler(CALL_FUNC_SINGLE_IPI, &mn10300_ipi_type, | |
| handle_percpu_irq); | |
| setup_irq(CALL_FUNC_SINGLE_IPI, &call_function_ipi); | |
| set_intr_level(CALL_FUNC_SINGLE_IPI, CALL_FUNCTION_GxICR_LV); | |
| mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI); | |
| /* set up the local timer IPI */ | |
| #if !defined(CONFIG_GENERIC_CLOCKEVENTS) || \ | |
| defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) | |
| irq_set_chip_and_handler(LOCAL_TIMER_IPI, &mn10300_ipi_type, | |
| handle_percpu_irq); | |
| setup_irq(LOCAL_TIMER_IPI, &local_timer_ipi); | |
| set_intr_level(LOCAL_TIMER_IPI, LOCAL_TIMER_GxICR_LV); | |
| mn10300_ipi_enable(LOCAL_TIMER_IPI); | |
| #endif | |
| #ifdef CONFIG_MN10300_CACHE_ENABLED | |
| /* set up the cache flush IPI */ | |
| irq_set_chip(FLUSH_CACHE_IPI, &mn10300_ipi_type); | |
| flags = arch_local_cli_save(); | |
| __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(FLUSH_CACHE_GxICR_LV), | |
| mn10300_low_ipi_handler); | |
| GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT; | |
| mn10300_ipi_enable(FLUSH_CACHE_IPI); | |
| arch_local_irq_restore(flags); | |
| #endif | |
| /* set up the NMI call function IPI */ | |
| irq_set_chip(CALL_FUNCTION_NMI_IPI, &mn10300_ipi_type); | |
| flags = arch_local_cli_save(); | |
| GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; | |
| tmp16 = GxICR(CALL_FUNCTION_NMI_IPI); | |
| arch_local_irq_restore(flags); | |
| /* set up the SMP boot IPI */ | |
| flags = arch_local_cli_save(); | |
| __set_intr_stub(NUM2EXCEP_IRQ_LEVEL(SMP_BOOT_GxICR_LV), | |
| mn10300_low_ipi_handler); | |
| arch_local_irq_restore(flags); | |
| #ifdef CONFIG_KERNEL_DEBUGGER | |
| irq_set_chip(DEBUGGER_NMI_IPI, &mn10300_ipi_type); | |
| #endif | |
| } | |
| /** | |
| * mn10300_ipi_shutdown - Shut down handling of an IPI | |
| * @irq: The IPI to be shut down. | |
| */ | |
| static void mn10300_ipi_shutdown(unsigned int irq) | |
| { | |
| unsigned long flags; | |
| u16 tmp; | |
| flags = arch_local_cli_save(); | |
| tmp = GxICR(irq); | |
| GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT; | |
| tmp = GxICR(irq); | |
| arch_local_irq_restore(flags); | |
| } | |
| /** | |
| * mn10300_ipi_enable - Enable an IPI | |
| * @irq: The IPI to be enabled. | |
| */ | |
| static void mn10300_ipi_enable(unsigned int irq) | |
| { | |
| unsigned long flags; | |
| u16 tmp; | |
| flags = arch_local_cli_save(); | |
| tmp = GxICR(irq); | |
| GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE; | |
| tmp = GxICR(irq); | |
| arch_local_irq_restore(flags); | |
| } | |
| static void mn10300_ipi_chip_enable(struct irq_data *d) | |
| { | |
| mn10300_ipi_enable(d->irq); | |
| } | |
| /** | |
| * mn10300_ipi_disable - Disable an IPI | |
| * @irq: The IPI to be disabled. | |
| */ | |
| static void mn10300_ipi_disable(unsigned int irq) | |
| { | |
| unsigned long flags; | |
| u16 tmp; | |
| flags = arch_local_cli_save(); | |
| tmp = GxICR(irq); | |
| GxICR(irq) = tmp & GxICR_LEVEL; | |
| tmp = GxICR(irq); | |
| arch_local_irq_restore(flags); | |
| } | |
| static void mn10300_ipi_chip_disable(struct irq_data *d) | |
| { | |
| mn10300_ipi_disable(d->irq); | |
| } | |
| /** | |
| * mn10300_ipi_ack - Acknowledge an IPI interrupt in the PIC | |
| * @irq: The IPI to be acknowledged. | |
| * | |
| * Clear the interrupt detection flag for the IPI on the appropriate interrupt | |
| * channel in the PIC. | |
| */ | |
| static void mn10300_ipi_ack(struct irq_data *d) | |
| { | |
| unsigned int irq = d->irq; | |
| unsigned long flags; | |
| u16 tmp; | |
| flags = arch_local_cli_save(); | |
| GxICR_u8(irq) = GxICR_DETECT; | |
| tmp = GxICR(irq); | |
| arch_local_irq_restore(flags); | |
| } | |
| /** | |
| * mn10300_ipi_nop - Dummy IPI action | |
| * @irq: The IPI to be acted upon. | |
| */ | |
| static void mn10300_ipi_nop(struct irq_data *d) | |
| { | |
| } | |
| /** | |
| * send_IPI_mask - Send IPIs to all CPUs in list | |
| * @cpumask: The list of CPUs to target. | |
| * @irq: The IPI request to be sent. | |
| * | |
| * Send the specified IPI to all the CPUs in the list, not waiting for them to | |
| * finish before returning. The caller is responsible for synchronisation if | |
| * that is needed. | |
| */ | |
| static void send_IPI_mask(const cpumask_t *cpumask, int irq) | |
| { | |
| int i; | |
| u16 tmp; | |
| for (i = 0; i < NR_CPUS; i++) { | |
| if (cpumask_test_cpu(i, cpumask)) { | |
| /* send IPI */ | |
| tmp = CROSS_GxICR(irq, i); | |
| CROSS_GxICR(irq, i) = | |
| tmp | GxICR_REQUEST | GxICR_DETECT; | |
| tmp = CROSS_GxICR(irq, i); /* flush write buffer */ | |
| } | |
| } | |
| } | |
| /** | |
| * send_IPI_self - Send an IPI to this CPU. | |
| * @irq: The IPI request to be sent. | |
| * | |
| * Send the specified IPI to the current CPU. | |
| */ | |
| void send_IPI_self(int irq) | |
| { | |
| send_IPI_mask(cpumask_of(smp_processor_id()), irq); | |
| } | |
| /** | |
| * send_IPI_allbutself - Send IPIs to all the other CPUs. | |
| * @irq: The IPI request to be sent. | |
| * | |
| * Send the specified IPI to all CPUs in the system barring the current one, | |
| * not waiting for them to finish before returning. The caller is responsible | |
| * for synchronisation if that is needed. | |
| */ | |
| void send_IPI_allbutself(int irq) | |
| { | |
| cpumask_t cpumask; | |
| cpumask_copy(&cpumask, cpu_online_mask); | |
| cpumask_clear_cpu(smp_processor_id(), &cpumask); | |
| send_IPI_mask(&cpumask, irq); | |
| } | |
| void arch_send_call_function_ipi_mask(const struct cpumask *mask) | |
| { | |
| BUG(); | |
| /*send_IPI_mask(mask, CALL_FUNCTION_IPI);*/ | |
| } | |
| void arch_send_call_function_single_ipi(int cpu) | |
| { | |
| send_IPI_mask(cpumask_of(cpu), CALL_FUNC_SINGLE_IPI); | |
| } | |
| /** | |
| * smp_send_reschedule - Send reschedule IPI to a CPU | |
| * @cpu: The CPU to target. | |
| */ | |
| void smp_send_reschedule(int cpu) | |
| { | |
| send_IPI_mask(cpumask_of(cpu), RESCHEDULE_IPI); | |
| } | |
| /** | |
| * smp_nmi_call_function - Send a call function NMI IPI to all CPUs | |
| * @func: The function to ask to be run. | |
| * @info: The context data to pass to that function. | |
| * @wait: If true, wait (atomically) until function is run on all CPUs. | |
| * | |
| * Send a non-maskable request to all CPUs in the system, requesting them to | |
| * run the specified function with the given context data, and, potentially, to | |
| * wait for completion of that function on all CPUs. | |
| * | |
| * Returns 0 if successful, -ETIMEDOUT if we were asked to wait, but hit the | |
| * timeout. | |
| */ | |
| int smp_nmi_call_function(smp_call_func_t func, void *info, int wait) | |
| { | |
| struct nmi_call_data_struct data; | |
| unsigned long flags; | |
| unsigned int cnt; | |
| int cpus, ret = 0; | |
| cpus = num_online_cpus() - 1; | |
| if (cpus < 1) | |
| return 0; | |
| data.func = func; | |
| data.info = info; | |
| cpumask_copy(&data.started, cpu_online_mask); | |
| cpumask_clear_cpu(smp_processor_id(), &data.started); | |
| data.wait = wait; | |
| if (wait) | |
| data.finished = data.started; | |
| spin_lock_irqsave(&smp_nmi_call_lock, flags); | |
| nmi_call_data = &data; | |
| smp_mb(); | |
| /* Send a message to all other CPUs and wait for them to respond */ | |
| send_IPI_allbutself(CALL_FUNCTION_NMI_IPI); | |
| /* Wait for response */ | |
| if (CALL_FUNCTION_NMI_IPI_TIMEOUT > 0) { | |
| for (cnt = 0; | |
| cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT && | |
| !cpumask_empty(&data.started); | |
| cnt++) | |
| mdelay(1); | |
| if (wait && cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT) { | |
| for (cnt = 0; | |
| cnt < CALL_FUNCTION_NMI_IPI_TIMEOUT && | |
| !cpumask_empty(&data.finished); | |
| cnt++) | |
| mdelay(1); | |
| } | |
| if (cnt >= CALL_FUNCTION_NMI_IPI_TIMEOUT) | |
| ret = -ETIMEDOUT; | |
| } else { | |
| /* If timeout value is zero, wait until cpumask has been | |
| * cleared */ | |
| while (!cpumask_empty(&data.started)) | |
| barrier(); | |
| if (wait) | |
| while (!cpumask_empty(&data.finished)) | |
| barrier(); | |
| } | |
| spin_unlock_irqrestore(&smp_nmi_call_lock, flags); | |
| return ret; | |
| } | |
| /** | |
| * smp_jump_to_debugger - Make other CPUs enter the debugger by sending an IPI | |
| * | |
| * Send a non-maskable request to all other CPUs in the system, instructing | |
| * them to jump into the debugger. The caller is responsible for checking that | |
| * the other CPUs responded to the instruction. | |
| * | |
| * The caller should make sure that this CPU's debugger IPI is disabled. | |
| */ | |
| void smp_jump_to_debugger(void) | |
| { | |
| if (num_online_cpus() > 1) | |
| /* Send a message to all other CPUs */ | |
| send_IPI_allbutself(DEBUGGER_NMI_IPI); | |
| } | |
| /** | |
| * stop_this_cpu - Callback to stop a CPU. | |
| * @unused: Callback context (ignored). | |
| */ | |
| void stop_this_cpu(void *unused) | |
| { | |
| static volatile int stopflag; | |
| unsigned long flags; | |
| #ifdef CONFIG_GDBSTUB | |
| /* In case of single stepping smp_send_stop by other CPU, | |
| * clear procindebug to avoid deadlock. | |
| */ | |
| atomic_set(&procindebug[smp_processor_id()], 0); | |
| #endif /* CONFIG_GDBSTUB */ | |
| flags = arch_local_cli_save(); | |
| set_cpu_online(smp_processor_id(), false); | |
| while (!stopflag) | |
| cpu_relax(); | |
| set_cpu_online(smp_processor_id(), true); | |
| arch_local_irq_restore(flags); | |
| } | |
| /** | |
| * smp_send_stop - Send a stop request to all CPUs. | |
| */ | |
| void smp_send_stop(void) | |
| { | |
| smp_nmi_call_function(stop_this_cpu, NULL, 0); | |
| } | |
| /** | |
| * smp_reschedule_interrupt - Reschedule IPI handler | |
| * @irq: The interrupt number. | |
| * @dev_id: The device ID. | |
| * | |
| * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. | |
| */ | |
| static irqreturn_t smp_reschedule_interrupt(int irq, void *dev_id) | |
| { | |
| scheduler_ipi(); | |
| return IRQ_HANDLED; | |
| } | |
| /** | |
| * smp_call_function_interrupt - Call function IPI handler | |
| * @irq: The interrupt number. | |
| * @dev_id: The device ID. | |
| * | |
| * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. | |
| */ | |
| static irqreturn_t smp_call_function_interrupt(int irq, void *dev_id) | |
| { | |
| /* generic_smp_call_function_interrupt(); */ | |
| generic_smp_call_function_single_interrupt(); | |
| return IRQ_HANDLED; | |
| } | |
| /** | |
| * smp_nmi_call_function_interrupt - Non-maskable call function IPI handler | |
| */ | |
| void smp_nmi_call_function_interrupt(void) | |
| { | |
| smp_call_func_t func = nmi_call_data->func; | |
| void *info = nmi_call_data->info; | |
| int wait = nmi_call_data->wait; | |
| /* Notify the initiating CPU that I've grabbed the data and am about to | |
| * execute the function | |
| */ | |
| smp_mb(); | |
| cpumask_clear_cpu(smp_processor_id(), &nmi_call_data->started); | |
| (*func)(info); | |
| if (wait) { | |
| smp_mb(); | |
| cpumask_clear_cpu(smp_processor_id(), | |
| &nmi_call_data->finished); | |
| } | |
| } | |
| #if !defined(CONFIG_GENERIC_CLOCKEVENTS) || \ | |
| defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST) | |
| /** | |
| * smp_ipi_timer_interrupt - Local timer IPI handler | |
| * @irq: The interrupt number. | |
| * @dev_id: The device ID. | |
| * | |
| * Returns IRQ_HANDLED to indicate we handled the interrupt successfully. | |
| */ | |
| static irqreturn_t smp_ipi_timer_interrupt(int irq, void *dev_id) | |
| { | |
| return local_timer_interrupt(); | |
| } | |
| #endif | |
| void __init smp_init_cpus(void) | |
| { | |
| int i; | |
| for (i = 0; i < NR_CPUS; i++) { | |
| set_cpu_possible(i, true); | |
| set_cpu_present(i, true); | |
| } | |
| } | |
| /** | |
| * smp_cpu_init - Initialise AP in start_secondary. | |
| * | |
| * For this Application Processor, set up init_mm, initialise FPU and set | |
| * interrupt level 0-6 setting. | |
| */ | |
| static void __init smp_cpu_init(void) | |
| { | |
| unsigned long flags; | |
| int cpu_id = smp_processor_id(); | |
| u16 tmp16; | |
| if (test_and_set_bit(cpu_id, &cpu_initialized)) { | |
| printk(KERN_WARNING "CPU#%d already initialized!\n", cpu_id); | |
| for (;;) | |
| local_irq_enable(); | |
| } | |
| printk(KERN_INFO "Initializing CPU#%d\n", cpu_id); | |
| atomic_inc(&init_mm.mm_count); | |
| current->active_mm = &init_mm; | |
| BUG_ON(current->mm); | |
| enter_lazy_tlb(&init_mm, current); | |
| /* Force FPU initialization */ | |
| clear_using_fpu(current); | |
| GxICR(CALL_FUNC_SINGLE_IPI) = CALL_FUNCTION_GxICR_LV | GxICR_DETECT; | |
| mn10300_ipi_enable(CALL_FUNC_SINGLE_IPI); | |
| GxICR(LOCAL_TIMER_IPI) = LOCAL_TIMER_GxICR_LV | GxICR_DETECT; | |
| mn10300_ipi_enable(LOCAL_TIMER_IPI); | |
| GxICR(RESCHEDULE_IPI) = RESCHEDULE_GxICR_LV | GxICR_DETECT; | |
| mn10300_ipi_enable(RESCHEDULE_IPI); | |
| #ifdef CONFIG_MN10300_CACHE_ENABLED | |
| GxICR(FLUSH_CACHE_IPI) = FLUSH_CACHE_GxICR_LV | GxICR_DETECT; | |
| mn10300_ipi_enable(FLUSH_CACHE_IPI); | |
| #endif | |
| mn10300_ipi_shutdown(SMP_BOOT_IRQ); | |
| /* Set up the non-maskable call function IPI */ | |
| flags = arch_local_cli_save(); | |
| GxICR(CALL_FUNCTION_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; | |
| tmp16 = GxICR(CALL_FUNCTION_NMI_IPI); | |
| arch_local_irq_restore(flags); | |
| } | |
| /** | |
| * smp_prepare_cpu_init - Initialise CPU in startup_secondary | |
| * | |
| * Set interrupt level 0-6 setting and init ICR of the kernel debugger. | |
| */ | |
| void smp_prepare_cpu_init(void) | |
| { | |
| int loop; | |
| /* Set the interrupt vector registers */ | |
| IVAR0 = EXCEP_IRQ_LEVEL0; | |
| IVAR1 = EXCEP_IRQ_LEVEL1; | |
| IVAR2 = EXCEP_IRQ_LEVEL2; | |
| IVAR3 = EXCEP_IRQ_LEVEL3; | |
| IVAR4 = EXCEP_IRQ_LEVEL4; | |
| IVAR5 = EXCEP_IRQ_LEVEL5; | |
| IVAR6 = EXCEP_IRQ_LEVEL6; | |
| /* Disable all interrupts and set to priority 6 (lowest) */ | |
| for (loop = 0; loop < GxICR_NUM_IRQS; loop++) | |
| GxICR(loop) = GxICR_LEVEL_6 | GxICR_DETECT; | |
| #ifdef CONFIG_KERNEL_DEBUGGER | |
| /* initialise the kernel debugger interrupt */ | |
| do { | |
| unsigned long flags; | |
| u16 tmp16; | |
| flags = arch_local_cli_save(); | |
| GxICR(DEBUGGER_NMI_IPI) = GxICR_NMI | GxICR_ENABLE | GxICR_DETECT; | |
| tmp16 = GxICR(DEBUGGER_NMI_IPI); | |
| arch_local_irq_restore(flags); | |
| } while (0); | |
| #endif | |
| } | |
| /** | |
| * start_secondary - Activate a secondary CPU (AP) | |
| * @unused: Thread parameter (ignored). | |
| */ | |
| int __init start_secondary(void *unused) | |
| { | |
| smp_cpu_init(); | |
| smp_callin(); | |
| while (!cpumask_test_cpu(smp_processor_id(), &smp_commenced_mask)) | |
| cpu_relax(); | |
| local_flush_tlb(); | |
| preempt_disable(); | |
| smp_online(); | |
| #ifdef CONFIG_GENERIC_CLOCKEVENTS | |
| init_clockevents(); | |
| #endif | |
| cpu_startup_entry(CPUHP_AP_ONLINE_IDLE); | |
| return 0; | |
| } | |
| /** | |
| * smp_prepare_cpus - Boot up secondary CPUs (APs) | |
| * @max_cpus: Maximum number of CPUs to boot. | |
| * | |
| * Call do_boot_cpu, and boot up APs. | |
| */ | |
| void __init smp_prepare_cpus(unsigned int max_cpus) | |
| { | |
| int phy_id; | |
| /* Setup boot CPU information */ | |
| smp_store_cpu_info(0); | |
| smp_tune_scheduling(); | |
| init_ipi(); | |
| /* If SMP should be disabled, then finish */ | |
| if (max_cpus == 0) { | |
| printk(KERN_INFO "SMP mode deactivated.\n"); | |
| goto smp_done; | |
| } | |
| /* Boot secondary CPUs (for which phy_id > 0) */ | |
| for (phy_id = 0; phy_id < NR_CPUS; phy_id++) { | |
| /* Don't boot primary CPU */ | |
| if (max_cpus <= cpucount + 1) | |
| continue; | |
| if (phy_id != 0) | |
| do_boot_cpu(phy_id); | |
| set_cpu_possible(phy_id, true); | |
| smp_show_cpu_info(phy_id); | |
| } | |
| smp_done: | |
| Dprintk("Boot done.\n"); | |
| } | |
| /** | |
| * smp_store_cpu_info - Save a CPU's information | |
| * @cpu: The CPU to save for. | |
| * | |
| * Save boot_cpu_data and jiffy for the specified CPU. | |
| */ | |
| static void __init smp_store_cpu_info(int cpu) | |
| { | |
| struct mn10300_cpuinfo *ci = &cpu_data[cpu]; | |
| *ci = boot_cpu_data; | |
| ci->loops_per_jiffy = loops_per_jiffy; | |
| ci->type = CPUREV; | |
| } | |
| /** | |
| * smp_tune_scheduling - Set time slice value | |
| * | |
| * Nothing to do here. | |
| */ | |
| static void __init smp_tune_scheduling(void) | |
| { | |
| } | |
| /** | |
| * do_boot_cpu: Boot up one CPU | |
| * @phy_id: Physical ID of CPU to boot. | |
| * | |
| * Send an IPI to a secondary CPU to boot it. Returns 0 on success, 1 | |
| * otherwise. | |
| */ | |
| static int __init do_boot_cpu(int phy_id) | |
| { | |
| struct task_struct *idle; | |
| unsigned long send_status, callin_status; | |
| int timeout, cpu_id; | |
| send_status = GxICR_REQUEST; | |
| callin_status = 0; | |
| timeout = 0; | |
| cpu_id = phy_id; | |
| cpucount++; | |
| /* Create idle thread for this CPU */ | |
| idle = fork_idle(cpu_id); | |
| if (IS_ERR(idle)) | |
| panic("Failed fork for CPU#%d.", cpu_id); | |
| idle->thread.pc = (unsigned long)start_secondary; | |
| printk(KERN_NOTICE "Booting CPU#%d\n", cpu_id); | |
| start_stack[cpu_id - 1] = idle->thread.sp; | |
| task_thread_info(idle)->cpu = cpu_id; | |
| /* Send boot IPI to AP */ | |
| send_IPI_mask(cpumask_of(phy_id), SMP_BOOT_IRQ); | |
| Dprintk("Waiting for send to finish...\n"); | |
| /* Wait for AP's IPI receive in 100[ms] */ | |
| do { | |
| udelay(1000); | |
| send_status = | |
| CROSS_GxICR(SMP_BOOT_IRQ, phy_id) & GxICR_REQUEST; | |
| } while (send_status == GxICR_REQUEST && timeout++ < 100); | |
| Dprintk("Waiting for cpu_callin_map.\n"); | |
| if (send_status == 0) { | |
| /* Allow AP to start initializing */ | |
| cpumask_set_cpu(cpu_id, &cpu_callout_map); | |
| /* Wait for setting cpu_callin_map */ | |
| timeout = 0; | |
| do { | |
| udelay(1000); | |
| callin_status = cpumask_test_cpu(cpu_id, | |
| &cpu_callin_map); | |
| } while (callin_status == 0 && timeout++ < 5000); | |
| if (callin_status == 0) | |
| Dprintk("Not responding.\n"); | |
| } else { | |
| printk(KERN_WARNING "IPI not delivered.\n"); | |
| } | |
| if (send_status == GxICR_REQUEST || callin_status == 0) { | |
| cpumask_clear_cpu(cpu_id, &cpu_callout_map); | |
| cpumask_clear_cpu(cpu_id, &cpu_callin_map); | |
| cpumask_clear_cpu(cpu_id, &cpu_initialized); | |
| cpucount--; | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /** | |
| * smp_show_cpu_info - Show SMP CPU information | |
| * @cpu: The CPU of interest. | |
| */ | |
| static void __init smp_show_cpu_info(int cpu) | |
| { | |
| struct mn10300_cpuinfo *ci = &cpu_data[cpu]; | |
| printk(KERN_INFO | |
| "CPU#%d : ioclk speed: %lu.%02luMHz : bogomips : %lu.%02lu\n", | |
| cpu, | |
| MN10300_IOCLK / 1000000, | |
| (MN10300_IOCLK / 10000) % 100, | |
| ci->loops_per_jiffy / (500000 / HZ), | |
| (ci->loops_per_jiffy / (5000 / HZ)) % 100); | |
| } | |
| /** | |
| * smp_callin - Set cpu_callin_map of the current CPU ID | |
| */ | |
| static void __init smp_callin(void) | |
| { | |
| unsigned long timeout; | |
| int cpu; | |
| cpu = smp_processor_id(); | |
| timeout = jiffies + (2 * HZ); | |
| if (cpumask_test_cpu(cpu, &cpu_callin_map)) { | |
| printk(KERN_ERR "CPU#%d already present.\n", cpu); | |
| BUG(); | |
| } | |
| Dprintk("CPU#%d waiting for CALLOUT\n", cpu); | |
| /* Wait for AP startup 2s total */ | |
| while (time_before(jiffies, timeout)) { | |
| if (cpumask_test_cpu(cpu, &cpu_callout_map)) | |
| break; | |
| cpu_relax(); | |
| } | |
| if (!time_before(jiffies, timeout)) { | |
| printk(KERN_ERR | |
| "BUG: CPU#%d started up but did not get a callout!\n", | |
| cpu); | |
| BUG(); | |
| } | |
| #ifdef CONFIG_CALIBRATE_DELAY | |
| calibrate_delay(); /* Get our bogomips */ | |
| #endif | |
| /* Save our processor parameters */ | |
| smp_store_cpu_info(cpu); | |
| /* Allow the boot processor to continue */ | |
| cpumask_set_cpu(cpu, &cpu_callin_map); | |
| } | |
| /** | |
| * smp_online - Set cpu_online_mask | |
| */ | |
| static void __init smp_online(void) | |
| { | |
| int cpu; | |
| cpu = smp_processor_id(); | |
| notify_cpu_starting(cpu); | |
| set_cpu_online(cpu, true); | |
| local_irq_enable(); | |
| } | |
| /** | |
| * smp_cpus_done - | |
| * @max_cpus: Maximum CPU count. | |
| * | |
| * Do nothing. | |
| */ | |
| void __init smp_cpus_done(unsigned int max_cpus) | |
| { | |
| } | |
| /* | |
| * smp_prepare_boot_cpu - Set up stuff for the boot processor. | |
| * | |
| * Set up the cpu_online_mask, cpu_callout_map and cpu_callin_map of the boot | |
| * processor (CPU 0). | |
| */ | |
| void smp_prepare_boot_cpu(void) | |
| { | |
| cpumask_set_cpu(0, &cpu_callout_map); | |
| cpumask_set_cpu(0, &cpu_callin_map); | |
| current_thread_info()->cpu = 0; | |
| } | |
| /* | |
| * initialize_secondary - Initialise a secondary CPU (Application Processor). | |
| * | |
| * Set SP register and jump to thread's PC address. | |
| */ | |
| void initialize_secondary(void) | |
| { | |
| asm volatile ( | |
| "mov %0,sp \n" | |
| "jmp (%1) \n" | |
| : | |
| : "a"(current->thread.sp), "a"(current->thread.pc)); | |
| } | |
| /** | |
| * __cpu_up - Set smp_commenced_mask for the nominated CPU | |
| * @cpu: The target CPU. | |
| */ | |
| int __cpu_up(unsigned int cpu, struct task_struct *tidle) | |
| { | |
| int timeout; | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| if (sleep_mode[cpu]) | |
| run_wakeup_cpu(cpu); | |
| #endif /* CONFIG_HOTPLUG_CPU */ | |
| cpumask_set_cpu(cpu, &smp_commenced_mask); | |
| /* Wait 5s total for a response */ | |
| for (timeout = 0 ; timeout < 5000 ; timeout++) { | |
| if (cpu_online(cpu)) | |
| break; | |
| udelay(1000); | |
| } | |
| BUG_ON(!cpu_online(cpu)); | |
| return 0; | |
| } | |
| /** | |
| * setup_profiling_timer - Set up the profiling timer | |
| * @multiplier - The frequency multiplier to use | |
| * | |
| * The frequency of the profiling timer can be changed by writing a multiplier | |
| * value into /proc/profile. | |
| */ | |
| int setup_profiling_timer(unsigned int multiplier) | |
| { | |
| return -EINVAL; | |
| } | |
| /* | |
| * CPU hotplug routines | |
| */ | |
| #ifdef CONFIG_HOTPLUG_CPU | |
| static DEFINE_PER_CPU(struct cpu, cpu_devices); | |
| static int __init topology_init(void) | |
| { | |
| int cpu, ret; | |
| for_each_cpu(cpu) { | |
| ret = register_cpu(&per_cpu(cpu_devices, cpu), cpu, NULL); | |
| if (ret) | |
| printk(KERN_WARNING | |
| "topology_init: register_cpu %d failed (%d)\n", | |
| cpu, ret); | |
| } | |
| return 0; | |
| } | |
| subsys_initcall(topology_init); | |
| int __cpu_disable(void) | |
| { | |
| int cpu = smp_processor_id(); | |
| if (cpu == 0) | |
| return -EBUSY; | |
| migrate_irqs(); | |
| cpumask_clear_cpu(cpu, &mm_cpumask(current->active_mm)); | |
| return 0; | |
| } | |
| void __cpu_die(unsigned int cpu) | |
| { | |
| run_sleep_cpu(cpu); | |
| } | |
| #ifdef CONFIG_MN10300_CACHE_ENABLED | |
| static inline void hotplug_cpu_disable_cache(void) | |
| { | |
| int tmp; | |
| asm volatile( | |
| " movhu (%1),%0 \n" | |
| " and %2,%0 \n" | |
| " movhu %0,(%1) \n" | |
| "1: movhu (%1),%0 \n" | |
| " btst %3,%0 \n" | |
| " bne 1b \n" | |
| : "=&r"(tmp) | |
| : "a"(&CHCTR), | |
| "i"(~(CHCTR_ICEN | CHCTR_DCEN)), | |
| "i"(CHCTR_ICBUSY | CHCTR_DCBUSY) | |
| : "memory", "cc"); | |
| } | |
| static inline void hotplug_cpu_enable_cache(void) | |
| { | |
| int tmp; | |
| asm volatile( | |
| "movhu (%1),%0 \n" | |
| "or %2,%0 \n" | |
| "movhu %0,(%1) \n" | |
| : "=&r"(tmp) | |
| : "a"(&CHCTR), | |
| "i"(CHCTR_ICEN | CHCTR_DCEN) | |
| : "memory", "cc"); | |
| } | |
| static inline void hotplug_cpu_invalidate_cache(void) | |
| { | |
| int tmp; | |
| asm volatile ( | |
| "movhu (%1),%0 \n" | |
| "or %2,%0 \n" | |
| "movhu %0,(%1) \n" | |
| : "=&r"(tmp) | |
| : "a"(&CHCTR), | |
| "i"(CHCTR_ICINV | CHCTR_DCINV) | |
| : "cc"); | |
| } | |
| #else /* CONFIG_MN10300_CACHE_ENABLED */ | |
| #define hotplug_cpu_disable_cache() do {} while (0) | |
| #define hotplug_cpu_enable_cache() do {} while (0) | |
| #define hotplug_cpu_invalidate_cache() do {} while (0) | |
| #endif /* CONFIG_MN10300_CACHE_ENABLED */ | |
| /** | |
| * hotplug_cpu_nmi_call_function - Call a function on other CPUs for hotplug | |
| * @cpumask: List of target CPUs. | |
| * @func: The function to call on those CPUs. | |
| * @info: The context data for the function to be called. | |
| * @wait: Whether to wait for the calls to complete. | |
| * | |
| * Non-maskably call a function on another CPU for hotplug purposes. | |
| * | |
| * This function must be called with maskable interrupts disabled. | |
| */ | |
| static int hotplug_cpu_nmi_call_function(cpumask_t cpumask, | |
| smp_call_func_t func, void *info, | |
| int wait) | |
| { | |
| /* | |
| * The address and the size of nmi_call_func_mask_data | |
| * need to be aligned on L1_CACHE_BYTES. | |
| */ | |
| static struct nmi_call_data_struct nmi_call_func_mask_data | |
| __cacheline_aligned; | |
| unsigned long start, end; | |
| start = (unsigned long)&nmi_call_func_mask_data; | |
| end = start + sizeof(struct nmi_call_data_struct); | |
| nmi_call_func_mask_data.func = func; | |
| nmi_call_func_mask_data.info = info; | |
| nmi_call_func_mask_data.started = cpumask; | |
| nmi_call_func_mask_data.wait = wait; | |
| if (wait) | |
| nmi_call_func_mask_data.finished = cpumask; | |
| spin_lock(&smp_nmi_call_lock); | |
| nmi_call_data = &nmi_call_func_mask_data; | |
| mn10300_local_dcache_flush_range(start, end); | |
| smp_wmb(); | |
| send_IPI_mask(cpumask, CALL_FUNCTION_NMI_IPI); | |
| do { | |
| mn10300_local_dcache_inv_range(start, end); | |
| barrier(); | |
| } while (!cpumask_empty(&nmi_call_func_mask_data.started)); | |
| if (wait) { | |
| do { | |
| mn10300_local_dcache_inv_range(start, end); | |
| barrier(); | |
| } while (!cpumask_empty(&nmi_call_func_mask_data.finished)); | |
| } | |
| spin_unlock(&smp_nmi_call_lock); | |
| return 0; | |
| } | |
| static void restart_wakeup_cpu(void) | |
| { | |
| unsigned int cpu = smp_processor_id(); | |
| cpumask_set_cpu(cpu, &cpu_callin_map); | |
| local_flush_tlb(); | |
| set_cpu_online(cpu, true); | |
| smp_wmb(); | |
| } | |
| static void prepare_sleep_cpu(void *unused) | |
| { | |
| sleep_mode[smp_processor_id()] = 1; | |
| smp_mb(); | |
| mn10300_local_dcache_flush_inv(); | |
| hotplug_cpu_disable_cache(); | |
| hotplug_cpu_invalidate_cache(); | |
| } | |
| /* when this function called, IE=0, NMID=0. */ | |
| static void sleep_cpu(void *unused) | |
| { | |
| unsigned int cpu_id = smp_processor_id(); | |
| /* | |
| * CALL_FUNCTION_NMI_IPI for wakeup_cpu() shall not be requested, | |
| * before this cpu goes in SLEEP mode. | |
| */ | |
| do { | |
| smp_mb(); | |
| __sleep_cpu(); | |
| } while (sleep_mode[cpu_id]); | |
| restart_wakeup_cpu(); | |
| } | |
| static void run_sleep_cpu(unsigned int cpu) | |
| { | |
| unsigned long flags; | |
| cpumask_t cpumask; | |
| cpumask_copy(&cpumask, &cpumask_of(cpu)); | |
| flags = arch_local_cli_save(); | |
| hotplug_cpu_nmi_call_function(cpumask, prepare_sleep_cpu, NULL, 1); | |
| hotplug_cpu_nmi_call_function(cpumask, sleep_cpu, NULL, 0); | |
| udelay(1); /* delay for the cpu to sleep. */ | |
| arch_local_irq_restore(flags); | |
| } | |
| static void wakeup_cpu(void) | |
| { | |
| hotplug_cpu_invalidate_cache(); | |
| hotplug_cpu_enable_cache(); | |
| smp_mb(); | |
| sleep_mode[smp_processor_id()] = 0; | |
| } | |
| static void run_wakeup_cpu(unsigned int cpu) | |
| { | |
| unsigned long flags; | |
| flags = arch_local_cli_save(); | |
| #if NR_CPUS == 2 | |
| mn10300_local_dcache_flush_inv(); | |
| #else | |
| /* | |
| * Before waking up the cpu, | |
| * all online cpus should stop and flush D-Cache for global data. | |
| */ | |
| #error not support NR_CPUS > 2, when CONFIG_HOTPLUG_CPU=y. | |
| #endif | |
| hotplug_cpu_nmi_call_function(cpumask_of(cpu), wakeup_cpu, NULL, 1); | |
| arch_local_irq_restore(flags); | |
| } | |
| #endif /* CONFIG_HOTPLUG_CPU */ |