| /* | |
| * OpenRISC idle.c | |
| * | |
| * Linux architectural port borrowing liberally from similar works of | |
| * others. All original copyrights apply as per the original source | |
| * declaration. | |
| * | |
| * Modifications for the OpenRISC architecture: | |
| * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com> | |
| * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> | |
| * | |
| * This program is free software; you can redistribute it and/or | |
| * modify it under the terms of the GNU General Public License | |
| * as published by the Free Software Foundation; either version | |
| * 2 of the License, or (at your option) any later version. | |
| */ | |
| #include <linux/signal.h> | |
| #include <linux/sched.h> | |
| #include <linux/kernel.h> | |
| #include <linux/errno.h> | |
| #include <linux/string.h> | |
| #include <linux/types.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/mman.h> | |
| #include <linux/mm.h> | |
| #include <linux/swap.h> | |
| #include <linux/smp.h> | |
| #include <linux/bootmem.h> | |
| #include <linux/init.h> | |
| #include <linux/delay.h> | |
| #include <linux/blkdev.h> /* for initrd_* */ | |
| #include <linux/pagemap.h> | |
| #include <linux/memblock.h> | |
| #include <asm/segment.h> | |
| #include <asm/pgalloc.h> | |
| #include <asm/pgtable.h> | |
| #include <asm/dma.h> | |
| #include <asm/io.h> | |
| #include <asm/tlb.h> | |
| #include <asm/mmu_context.h> | |
| #include <asm/kmap_types.h> | |
| #include <asm/fixmap.h> | |
| #include <asm/tlbflush.h> | |
| #include <asm/sections.h> | |
| int mem_init_done; | |
| DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); | |
| static void __init zone_sizes_init(void) | |
| { | |
| unsigned long zones_size[MAX_NR_ZONES]; | |
| /* Clear the zone sizes */ | |
| memset(zones_size, 0, sizeof(zones_size)); | |
| /* | |
| * We use only ZONE_NORMAL | |
| */ | |
| zones_size[ZONE_NORMAL] = max_low_pfn; | |
| free_area_init(zones_size); | |
| } | |
| extern const char _s_kernel_ro[], _e_kernel_ro[]; | |
| /* | |
| * Map all physical memory into kernel's address space. | |
| * | |
| * This is explicitly coded for two-level page tables, so if you need | |
| * something else then this needs to change. | |
| */ | |
| static void __init map_ram(void) | |
| { | |
| unsigned long v, p, e; | |
| pgprot_t prot; | |
| pgd_t *pge; | |
| pud_t *pue; | |
| pmd_t *pme; | |
| pte_t *pte; | |
| /* These mark extents of read-only kernel pages... | |
| * ...from vmlinux.lds.S | |
| */ | |
| struct memblock_region *region; | |
| v = PAGE_OFFSET; | |
| for_each_memblock(memory, region) { | |
| p = (u32) region->base & PAGE_MASK; | |
| e = p + (u32) region->size; | |
| v = (u32) __va(p); | |
| pge = pgd_offset_k(v); | |
| while (p < e) { | |
| int j; | |
| pue = pud_offset(pge, v); | |
| pme = pmd_offset(pue, v); | |
| if ((u32) pue != (u32) pge || (u32) pme != (u32) pge) { | |
| panic("%s: OR1K kernel hardcoded for " | |
| "two-level page tables", | |
| __func__); | |
| } | |
| /* Alloc one page for holding PTE's... */ | |
| pte = (pte_t *) alloc_bootmem_low_pages(PAGE_SIZE); | |
| set_pmd(pme, __pmd(_KERNPG_TABLE + __pa(pte))); | |
| /* Fill the newly allocated page with PTE'S */ | |
| for (j = 0; p < e && j < PTRS_PER_PGD; | |
| v += PAGE_SIZE, p += PAGE_SIZE, j++, pte++) { | |
| if (v >= (u32) _e_kernel_ro || | |
| v < (u32) _s_kernel_ro) | |
| prot = PAGE_KERNEL; | |
| else | |
| prot = PAGE_KERNEL_RO; | |
| set_pte(pte, mk_pte_phys(p, prot)); | |
| } | |
| pge++; | |
| } | |
| printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__, | |
| region->base, region->base + region->size); | |
| } | |
| } | |
| void __init paging_init(void) | |
| { | |
| extern void tlb_init(void); | |
| unsigned long end; | |
| int i; | |
| printk(KERN_INFO "Setting up paging and PTEs.\n"); | |
| /* clear out the init_mm.pgd that will contain the kernel's mappings */ | |
| for (i = 0; i < PTRS_PER_PGD; i++) | |
| swapper_pg_dir[i] = __pgd(0); | |
| /* make sure the current pgd table points to something sane | |
| * (even if it is most probably not used until the next | |
| * switch_mm) | |
| */ | |
| current_pgd = init_mm.pgd; | |
| end = (unsigned long)__va(max_low_pfn * PAGE_SIZE); | |
| map_ram(); | |
| zone_sizes_init(); | |
| /* self modifying code ;) */ | |
| /* Since the old TLB miss handler has been running up until now, | |
| * the kernel pages are still all RW, so we can still modify the | |
| * text directly... after this change and a TLB flush, the kernel | |
| * pages will become RO. | |
| */ | |
| { | |
| extern unsigned long dtlb_miss_handler; | |
| extern unsigned long itlb_miss_handler; | |
| unsigned long *dtlb_vector = __va(0x900); | |
| unsigned long *itlb_vector = __va(0xa00); | |
| printk(KERN_INFO "itlb_miss_handler %p\n", &itlb_miss_handler); | |
| *itlb_vector = ((unsigned long)&itlb_miss_handler - | |
| (unsigned long)itlb_vector) >> 2; | |
| /* Soft ordering constraint to ensure that dtlb_vector is | |
| * the last thing updated | |
| */ | |
| barrier(); | |
| printk(KERN_INFO "dtlb_miss_handler %p\n", &dtlb_miss_handler); | |
| *dtlb_vector = ((unsigned long)&dtlb_miss_handler - | |
| (unsigned long)dtlb_vector) >> 2; | |
| } | |
| /* Soft ordering constraint to ensure that cache invalidation and | |
| * TLB flush really happen _after_ code has been modified. | |
| */ | |
| barrier(); | |
| /* Invalidate instruction caches after code modification */ | |
| mtspr(SPR_ICBIR, 0x900); | |
| mtspr(SPR_ICBIR, 0xa00); | |
| /* New TLB miss handlers and kernel page tables are in now place. | |
| * Make sure that page flags get updated for all pages in TLB by | |
| * flushing the TLB and forcing all TLB entries to be recreated | |
| * from their page table flags. | |
| */ | |
| flush_tlb_all(); | |
| } | |
| /* References to section boundaries */ | |
| void __init mem_init(void) | |
| { | |
| BUG_ON(!mem_map); | |
| max_mapnr = max_low_pfn; | |
| high_memory = (void *)__va(max_low_pfn * PAGE_SIZE); | |
| /* clear the zero-page */ | |
| memset((void *)empty_zero_page, 0, PAGE_SIZE); | |
| /* this will put all low memory onto the freelists */ | |
| free_all_bootmem(); | |
| mem_init_print_info(NULL); | |
| printk("mem_init_done ...........................................\n"); | |
| mem_init_done = 1; | |
| return; | |
| } | |
| #ifdef CONFIG_BLK_DEV_INITRD | |
| void free_initrd_mem(unsigned long start, unsigned long end) | |
| { | |
| free_reserved_area((void *)start, (void *)end, -1, "initrd"); | |
| } | |
| #endif | |
| void free_initmem(void) | |
| { | |
| free_initmem_default(-1); | |
| } |