| /* | |
| * This file is subject to the terms and conditions of the GNU General Public | |
| * License. See the file "COPYING" in the main directory of this archive | |
| * for more details. | |
| * | |
| * | |
| * Copyright (C) 1995, 1996, 1997, 1998 by Ralf Baechle | |
| * Copyright 1999 SuSE GmbH (Philipp Rumpf, prumpf@tux.org) | |
| * Copyright 1999 Hewlett Packard Co. | |
| * | |
| */ | |
| #include <linux/mm.h> | |
| #include <linux/ptrace.h> | |
| #include <linux/sched.h> | |
| #include <linux/interrupt.h> | |
| #include <linux/extable.h> | |
| #include <linux/uaccess.h> | |
| #include <asm/traps.h> | |
| /* Various important other fields */ | |
| #define bit22set(x) (x & 0x00000200) | |
| #define bits23_25set(x) (x & 0x000001c0) | |
| #define isGraphicsFlushRead(x) ((x & 0xfc003fdf) == 0x04001a80) | |
| /* extended opcode is 0x6a */ | |
| #define BITSSET 0x1c0 /* for identifying LDCW */ | |
| DEFINE_PER_CPU(struct exception_data, exception_data); | |
| int show_unhandled_signals = 1; | |
| /* | |
| * parisc_acctyp(unsigned int inst) -- | |
| * Given a PA-RISC memory access instruction, determine if the | |
| * the instruction would perform a memory read or memory write | |
| * operation. | |
| * | |
| * This function assumes that the given instruction is a memory access | |
| * instruction (i.e. you should really only call it if you know that | |
| * the instruction has generated some sort of a memory access fault). | |
| * | |
| * Returns: | |
| * VM_READ if read operation | |
| * VM_WRITE if write operation | |
| * VM_EXEC if execute operation | |
| */ | |
| static unsigned long | |
| parisc_acctyp(unsigned long code, unsigned int inst) | |
| { | |
| if (code == 6 || code == 16) | |
| return VM_EXEC; | |
| switch (inst & 0xf0000000) { | |
| case 0x40000000: /* load */ | |
| case 0x50000000: /* new load */ | |
| return VM_READ; | |
| case 0x60000000: /* store */ | |
| case 0x70000000: /* new store */ | |
| return VM_WRITE; | |
| case 0x20000000: /* coproc */ | |
| case 0x30000000: /* coproc2 */ | |
| if (bit22set(inst)) | |
| return VM_WRITE; | |
| case 0x0: /* indexed/memory management */ | |
| if (bit22set(inst)) { | |
| /* | |
| * Check for the 'Graphics Flush Read' instruction. | |
| * It resembles an FDC instruction, except for bits | |
| * 20 and 21. Any combination other than zero will | |
| * utilize the block mover functionality on some | |
| * older PA-RISC platforms. The case where a block | |
| * move is performed from VM to graphics IO space | |
| * should be treated as a READ. | |
| * | |
| * The significance of bits 20,21 in the FDC | |
| * instruction is: | |
| * | |
| * 00 Flush data cache (normal instruction behavior) | |
| * 01 Graphics flush write (IO space -> VM) | |
| * 10 Graphics flush read (VM -> IO space) | |
| * 11 Graphics flush read/write (VM <-> IO space) | |
| */ | |
| if (isGraphicsFlushRead(inst)) | |
| return VM_READ; | |
| return VM_WRITE; | |
| } else { | |
| /* | |
| * Check for LDCWX and LDCWS (semaphore instructions). | |
| * If bits 23 through 25 are all 1's it is one of | |
| * the above two instructions and is a write. | |
| * | |
| * Note: With the limited bits we are looking at, | |
| * this will also catch PROBEW and PROBEWI. However, | |
| * these should never get in here because they don't | |
| * generate exceptions of the type: | |
| * Data TLB miss fault/data page fault | |
| * Data memory protection trap | |
| */ | |
| if (bits23_25set(inst) == BITSSET) | |
| return VM_WRITE; | |
| } | |
| return VM_READ; /* Default */ | |
| } | |
| return VM_READ; /* Default */ | |
| } | |
| #undef bit22set | |
| #undef bits23_25set | |
| #undef isGraphicsFlushRead | |
| #undef BITSSET | |
| #if 0 | |
| /* This is the treewalk to find a vma which is the highest that has | |
| * a start < addr. We're using find_vma_prev instead right now, but | |
| * we might want to use this at some point in the future. Probably | |
| * not, but I want it committed to CVS so I don't lose it :-) | |
| */ | |
| while (tree != vm_avl_empty) { | |
| if (tree->vm_start > addr) { | |
| tree = tree->vm_avl_left; | |
| } else { | |
| prev = tree; | |
| if (prev->vm_next == NULL) | |
| break; | |
| if (prev->vm_next->vm_start > addr) | |
| break; | |
| tree = tree->vm_avl_right; | |
| } | |
| } | |
| #endif | |
| int fixup_exception(struct pt_regs *regs) | |
| { | |
| const struct exception_table_entry *fix; | |
| fix = search_exception_tables(regs->iaoq[0]); | |
| if (fix) { | |
| struct exception_data *d; | |
| d = this_cpu_ptr(&exception_data); | |
| d->fault_ip = regs->iaoq[0]; | |
| d->fault_gp = regs->gr[27]; | |
| d->fault_space = regs->isr; | |
| d->fault_addr = regs->ior; | |
| regs->iaoq[0] = (unsigned long)&fix->fixup + fix->fixup; | |
| regs->iaoq[0] &= ~3; | |
| /* | |
| * NOTE: In some cases the faulting instruction | |
| * may be in the delay slot of a branch. We | |
| * don't want to take the branch, so we don't | |
| * increment iaoq[1], instead we set it to be | |
| * iaoq[0]+4, and clear the B bit in the PSW | |
| */ | |
| regs->iaoq[1] = regs->iaoq[0] + 4; | |
| regs->gr[0] &= ~PSW_B; /* IPSW in gr[0] */ | |
| return 1; | |
| } | |
| return 0; | |
| } | |
| /* | |
| * parisc hardware trap list | |
| * | |
| * Documented in section 3 "Addressing and Access Control" of the | |
| * "PA-RISC 1.1 Architecture and Instruction Set Reference Manual" | |
| * https://parisc.wiki.kernel.org/index.php/File:Pa11_acd.pdf | |
| * | |
| * For implementation see handle_interruption() in traps.c | |
| */ | |
| static const char * const trap_description[] = { | |
| [1] "High-priority machine check (HPMC)", | |
| [2] "Power failure interrupt", | |
| [3] "Recovery counter trap", | |
| [5] "Low-priority machine check", | |
| [6] "Instruction TLB miss fault", | |
| [7] "Instruction access rights / protection trap", | |
| [8] "Illegal instruction trap", | |
| [9] "Break instruction trap", | |
| [10] "Privileged operation trap", | |
| [11] "Privileged register trap", | |
| [12] "Overflow trap", | |
| [13] "Conditional trap", | |
| [14] "FP Assist Exception trap", | |
| [15] "Data TLB miss fault", | |
| [16] "Non-access ITLB miss fault", | |
| [17] "Non-access DTLB miss fault", | |
| [18] "Data memory protection/unaligned access trap", | |
| [19] "Data memory break trap", | |
| [20] "TLB dirty bit trap", | |
| [21] "Page reference trap", | |
| [22] "Assist emulation trap", | |
| [25] "Taken branch trap", | |
| [26] "Data memory access rights trap", | |
| [27] "Data memory protection ID trap", | |
| [28] "Unaligned data reference trap", | |
| }; | |
| const char *trap_name(unsigned long code) | |
| { | |
| const char *t = NULL; | |
| if (code < ARRAY_SIZE(trap_description)) | |
| t = trap_description[code]; | |
| return t ? t : "Unknown trap"; | |
| } | |
| /* | |
| * Print out info about fatal segfaults, if the show_unhandled_signals | |
| * sysctl is set: | |
| */ | |
| static inline void | |
| show_signal_msg(struct pt_regs *regs, unsigned long code, | |
| unsigned long address, struct task_struct *tsk, | |
| struct vm_area_struct *vma) | |
| { | |
| if (!unhandled_signal(tsk, SIGSEGV)) | |
| return; | |
| if (!printk_ratelimit()) | |
| return; | |
| pr_warn("\n"); | |
| pr_warn("do_page_fault() command='%s' type=%lu address=0x%08lx", | |
| tsk->comm, code, address); | |
| print_vma_addr(KERN_CONT " in ", regs->iaoq[0]); | |
| pr_cont(" trap #%lu: %s%c", code, trap_name(code), | |
| vma ? ',':'\n'); | |
| if (vma) | |
| pr_warn(KERN_CONT " vm_start = 0x%08lx, vm_end = 0x%08lx\n", | |
| vma->vm_start, vma->vm_end); | |
| show_regs(regs); | |
| } | |
| void do_page_fault(struct pt_regs *regs, unsigned long code, | |
| unsigned long address) | |
| { | |
| struct vm_area_struct *vma, *prev_vma; | |
| struct task_struct *tsk; | |
| struct mm_struct *mm; | |
| unsigned long acc_type; | |
| int fault; | |
| unsigned int flags; | |
| if (faulthandler_disabled()) | |
| goto no_context; | |
| tsk = current; | |
| mm = tsk->mm; | |
| if (!mm) | |
| goto no_context; | |
| flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE; | |
| if (user_mode(regs)) | |
| flags |= FAULT_FLAG_USER; | |
| acc_type = parisc_acctyp(code, regs->iir); | |
| if (acc_type & VM_WRITE) | |
| flags |= FAULT_FLAG_WRITE; | |
| retry: | |
| down_read(&mm->mmap_sem); | |
| vma = find_vma_prev(mm, address, &prev_vma); | |
| if (!vma || address < vma->vm_start) | |
| goto check_expansion; | |
| /* | |
| * Ok, we have a good vm_area for this memory access. We still need to | |
| * check the access permissions. | |
| */ | |
| good_area: | |
| if ((vma->vm_flags & acc_type) != acc_type) | |
| goto bad_area; | |
| /* | |
| * If for any reason at all we couldn't handle the fault, make | |
| * sure we exit gracefully rather than endlessly redo the | |
| * fault. | |
| */ | |
| fault = handle_mm_fault(vma, address, flags); | |
| if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) | |
| return; | |
| if (unlikely(fault & VM_FAULT_ERROR)) { | |
| /* | |
| * We hit a shared mapping outside of the file, or some | |
| * other thing happened to us that made us unable to | |
| * handle the page fault gracefully. | |
| */ | |
| if (fault & VM_FAULT_OOM) | |
| goto out_of_memory; | |
| else if (fault & VM_FAULT_SIGSEGV) | |
| goto bad_area; | |
| else if (fault & VM_FAULT_SIGBUS) | |
| goto bad_area; | |
| BUG(); | |
| } | |
| if (flags & FAULT_FLAG_ALLOW_RETRY) { | |
| if (fault & VM_FAULT_MAJOR) | |
| current->maj_flt++; | |
| else | |
| current->min_flt++; | |
| if (fault & VM_FAULT_RETRY) { | |
| flags &= ~FAULT_FLAG_ALLOW_RETRY; | |
| /* | |
| * No need to up_read(&mm->mmap_sem) as we would | |
| * have already released it in __lock_page_or_retry | |
| * in mm/filemap.c. | |
| */ | |
| goto retry; | |
| } | |
| } | |
| up_read(&mm->mmap_sem); | |
| return; | |
| check_expansion: | |
| vma = prev_vma; | |
| if (vma && (expand_stack(vma, address) == 0)) | |
| goto good_area; | |
| /* | |
| * Something tried to access memory that isn't in our memory map.. | |
| */ | |
| bad_area: | |
| up_read(&mm->mmap_sem); | |
| if (user_mode(regs)) { | |
| struct siginfo si; | |
| show_signal_msg(regs, code, address, tsk, vma); | |
| switch (code) { | |
| case 15: /* Data TLB miss fault/Data page fault */ | |
| /* send SIGSEGV when outside of vma */ | |
| if (!vma || | |
| address < vma->vm_start || address > vma->vm_end) { | |
| si.si_signo = SIGSEGV; | |
| si.si_code = SEGV_MAPERR; | |
| break; | |
| } | |
| /* send SIGSEGV for wrong permissions */ | |
| if ((vma->vm_flags & acc_type) != acc_type) { | |
| si.si_signo = SIGSEGV; | |
| si.si_code = SEGV_ACCERR; | |
| break; | |
| } | |
| /* probably address is outside of mapped file */ | |
| /* fall through */ | |
| case 17: /* NA data TLB miss / page fault */ | |
| case 18: /* Unaligned access - PCXS only */ | |
| si.si_signo = SIGBUS; | |
| si.si_code = (code == 18) ? BUS_ADRALN : BUS_ADRERR; | |
| break; | |
| case 16: /* Non-access instruction TLB miss fault */ | |
| case 26: /* PCXL: Data memory access rights trap */ | |
| default: | |
| si.si_signo = SIGSEGV; | |
| si.si_code = (code == 26) ? SEGV_ACCERR : SEGV_MAPERR; | |
| break; | |
| } | |
| si.si_errno = 0; | |
| si.si_addr = (void __user *) address; | |
| force_sig_info(si.si_signo, &si, current); | |
| return; | |
| } | |
| no_context: | |
| if (!user_mode(regs) && fixup_exception(regs)) { | |
| return; | |
| } | |
| parisc_terminate("Bad Address (null pointer deref?)", regs, code, address); | |
| out_of_memory: | |
| up_read(&mm->mmap_sem); | |
| if (!user_mode(regs)) | |
| goto no_context; | |
| pagefault_out_of_memory(); | |
| } |