| /* | |
| * CM5200 board Device Tree Source | |
| * | |
| * Copyright (C) 2007 Semihalf | |
| * Marian Balakowicz <m8@semihalf.com> | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| /include/ "mpc5200b.dtsi" | |
| &gpt0 { fsl,has-wdt; }; | |
| / { | |
| model = "schindler,cm5200"; | |
| compatible = "schindler,cm5200"; | |
| soc5200@f0000000 { | |
| can@900 { | |
| status = "disabled"; | |
| }; | |
| can@980 { | |
| status = "disabled"; | |
| }; | |
| psc@2000 { // PSC1 | |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | |
| }; | |
| psc@2200 { // PSC2 | |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | |
| }; | |
| psc@2400 { // PSC3 | |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | |
| }; | |
| psc@2600 { // PSC4 | |
| status = "disabled"; | |
| }; | |
| psc@2800 { // PSC5 | |
| status = "disabled"; | |
| }; | |
| psc@2c00 { // PSC6 | |
| compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; | |
| }; | |
| ethernet@3000 { | |
| phy-handle = <&phy0>; | |
| }; | |
| mdio@3000 { | |
| phy0: ethernet-phy@0 { | |
| reg = <0>; | |
| }; | |
| }; | |
| ata@3a00 { | |
| status = "disabled"; | |
| }; | |
| i2c@3d00 { | |
| status = "disabled"; | |
| }; | |
| }; | |
| pci@f0000d00 { | |
| status = "disabled"; | |
| }; | |
| localbus { | |
| // 16-bit flash device at LocalPlus Bus CS0 | |
| flash@0,0 { | |
| compatible = "cfi-flash"; | |
| reg = <0 0 0x2000000>; | |
| bank-width = <2>; | |
| device-width = <2>; | |
| #size-cells = <1>; | |
| #address-cells = <1>; | |
| }; | |
| }; | |
| }; |