| /* | |
| * Device Tree for the Embedded Planet EP8248E board running PlanetCore. | |
| * | |
| * Copyright 2007 Freescale Semiconductor Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| /dts-v1/; | |
| / { | |
| model = "EP8248E"; | |
| compatible = "fsl,ep8248e"; | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| aliases { | |
| planetcore-SMC1 = &smc1; | |
| planetcore-SCC1 = &scc1; | |
| ethernet0 = ð0; | |
| ethernet1 = ð1; | |
| serial0 = &smc1; | |
| serial1 = &scc1; | |
| }; | |
| cpus { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| PowerPC,8248@0 { | |
| device_type = "cpu"; | |
| reg = <0>; | |
| d-cache-line-size = <32>; | |
| i-cache-line-size = <32>; | |
| d-cache-size = <16384>; | |
| i-cache-size = <16384>; | |
| timebase-frequency = <0>; | |
| clock-frequency = <0>; | |
| }; | |
| }; | |
| localbus@f0010100 { | |
| compatible = "fsl,mpc8248-localbus", | |
| "fsl,pq2-localbus", | |
| "simple-bus"; | |
| #address-cells = <2>; | |
| #size-cells = <1>; | |
| reg = <0xf0010100 0x40>; | |
| ranges = <0 0 0xfc000000 0x04000000 | |
| 1 0 0xfa000000 0x00008000>; | |
| flash@0,3800000 { | |
| compatible = "cfi-flash"; | |
| reg = <0 0x3800000 0x800000>; | |
| bank-width = <4>; | |
| device-width = <2>; | |
| }; | |
| bcsr@1,0 { | |
| #address-cells = <2>; | |
| #size-cells = <1>; | |
| reg = <1 0 0x10>; | |
| compatible = "fsl,ep8248e-bcsr"; | |
| ranges; | |
| mdio { | |
| compatible = "fsl,ep8248e-mdio-bitbang"; | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| reg = <1 8 1>; | |
| PHY0: ethernet-phy@0 { | |
| interrupt-parent = <&PIC>; | |
| reg = <0>; | |
| }; | |
| PHY1: ethernet-phy@1 { | |
| interrupt-parent = <&PIC>; | |
| reg = <1>; | |
| }; | |
| }; | |
| }; | |
| }; | |
| memory { | |
| device_type = "memory"; | |
| reg = <0 0>; | |
| }; | |
| soc@f0000000 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "fsl,mpc8248-immr", "fsl,pq2-soc", "simple-bus"; | |
| ranges = <0x00000000 0xf0000000 0x00053000>; | |
| // Temporary until code stops depending on it. | |
| device_type = "soc"; | |
| // Temporary -- will go away once kernel uses ranges for get_immrbase(). | |
| reg = <0xf0000000 0x00053000>; | |
| cpm@119c0 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| #interrupt-cells = <2>; | |
| compatible = "fsl,mpc8248-cpm", "fsl,cpm2", | |
| "simple-bus"; | |
| reg = <0x119c0 0x30>; | |
| ranges; | |
| muram { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| ranges = <0 0 0x10000>; | |
| data@0 { | |
| compatible = "fsl,cpm-muram-data"; | |
| reg = <0 0x2000 0x9800 0x800>; | |
| }; | |
| }; | |
| brg@119f0 { | |
| compatible = "fsl,mpc8248-brg", | |
| "fsl,cpm2-brg", | |
| "fsl,cpm-brg"; | |
| reg = <0x119f0 0x10 0x115f0 0x10>; | |
| }; | |
| /* Monitor port/SMC1 */ | |
| smc1: serial@11a80 { | |
| device_type = "serial"; | |
| compatible = "fsl,mpc8248-smc-uart", | |
| "fsl,cpm2-smc-uart"; | |
| reg = <0x11a80 0x20 0x87fc 2>; | |
| interrupts = <4 8>; | |
| interrupt-parent = <&PIC>; | |
| fsl,cpm-brg = <7>; | |
| fsl,cpm-command = <0x1d000000>; | |
| linux,planetcore-label = "SMC1"; | |
| }; | |
| /* "Serial" port/SCC1 */ | |
| scc1: serial@11a00 { | |
| device_type = "serial"; | |
| compatible = "fsl,mpc8248-scc-uart", | |
| "fsl,cpm2-scc-uart"; | |
| reg = <0x11a00 0x20 0x8000 0x100>; | |
| interrupts = <40 8>; | |
| interrupt-parent = <&PIC>; | |
| fsl,cpm-brg = <1>; | |
| fsl,cpm-command = <0x00800000>; | |
| linux,planetcore-label = "SCC1"; | |
| }; | |
| eth0: ethernet@11300 { | |
| device_type = "network"; | |
| compatible = "fsl,mpc8248-fcc-enet", | |
| "fsl,cpm2-fcc-enet"; | |
| reg = <0x11300 0x20 0x8400 0x100 0x11390 1>; | |
| local-mac-address = [ 00 00 00 00 00 00 ]; | |
| interrupts = <32 8>; | |
| interrupt-parent = <&PIC>; | |
| phy-handle = <&PHY0>; | |
| linux,network-index = <0>; | |
| fsl,cpm-command = <0x12000300>; | |
| }; | |
| eth1: ethernet@11320 { | |
| device_type = "network"; | |
| compatible = "fsl,mpc8248-fcc-enet", | |
| "fsl,cpm2-fcc-enet"; | |
| reg = <0x11320 0x20 0x8500 0x100 0x113b0 1>; | |
| local-mac-address = [ 00 00 00 00 00 00 ]; | |
| interrupts = <33 8>; | |
| interrupt-parent = <&PIC>; | |
| phy-handle = <&PHY1>; | |
| linux,network-index = <1>; | |
| fsl,cpm-command = <0x16200300>; | |
| }; | |
| usb@11b60 { | |
| #address-cells = <1>; | |
| #size-cells = <0>; | |
| compatible = "fsl,mpc8248-usb", | |
| "fsl,cpm2-usb"; | |
| reg = <0x11b60 0x18 0x8b00 0x100>; | |
| interrupt-parent = <&PIC>; | |
| interrupts = <11 8>; | |
| fsl,cpm-command = <0x2e600000>; | |
| }; | |
| }; | |
| PIC: interrupt-controller@10c00 { | |
| #interrupt-cells = <2>; | |
| interrupt-controller; | |
| reg = <0x10c00 0x80>; | |
| compatible = "fsl,mpc8248-pic", "fsl,pq2-pic"; | |
| }; | |
| }; | |
| }; |