| /* | |
| * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges) | |
| * | |
| * Copyright 2011-2012 Freescale Semiconductor Inc. | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * * Neither the name of Freescale Semiconductor nor the | |
| * names of its contributors may be used to endorse or promote products | |
| * derived from this software without specific prior written permission. | |
| * | |
| * | |
| * ALTERNATIVELY, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") as published by the Free Software | |
| * Foundation, either version 2 of that License or (at your option) any | |
| * later version. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY | |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY | |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| &board_ifc { | |
| nand@0,0 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "fsl,ifc-nand"; | |
| reg = <0x0 0x0 0x4000>; | |
| }; | |
| }; | |
| &board_soc { | |
| /* BSC9131RDB does not have any device on i2c@3100 */ | |
| i2c@3100 { | |
| status = "disabled"; | |
| }; | |
| spi@7000 { | |
| flash@0 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "spansion,s25sl12801", "jedec,spi-nor"; | |
| reg = <0>; | |
| spi-max-frequency = <50000000>; | |
| }; | |
| }; | |
| usb@22000 { | |
| phy_type = "ulpi"; | |
| }; | |
| mdio@24000 { | |
| phy0: ethernet-phy@0 { | |
| interrupts = <3 1 0 0>; | |
| reg = <0x0>; | |
| }; | |
| phy1: ethernet-phy@1 { | |
| interrupts = <2 1 0 0>; | |
| reg = <0x3>; | |
| }; | |
| }; | |
| sdhc@2e000 { | |
| status = "disabled"; | |
| }; | |
| ptp_clock@b0e00 { | |
| compatible = "fsl,etsec-ptp"; | |
| reg = <0xb0e00 0xb0>; | |
| interrupts = <68 2 0 0 69 2 0 0>; | |
| fsl,tclk-period = <5>; | |
| fsl,tmr-prsc = <2>; | |
| fsl,tmr-add = <0xcccccccd>; | |
| fsl,tmr-fiper1 = <999999995>; | |
| fsl,tmr-fiper2 = <99990>; | |
| fsl,max-adj = <249999999>; | |
| }; | |
| enet0: ethernet@b0000 { | |
| phy-handle = <&phy0>; | |
| phy-connection-type = "rgmii-id"; | |
| }; | |
| enet1: ethernet@b1000 { | |
| phy-handle = <&phy1>; | |
| phy-connection-type = "rgmii-id"; | |
| }; | |
| }; |