| /* | |
| * P1023 RDB Device Tree Source | |
| * | |
| * Copyright 2013 - 2014 Freescale Semiconductor Inc. | |
| * | |
| * Author: Chunhe Lan <Chunhe.Lan@freescale.com> | |
| * | |
| * Redistribution and use in source and binary forms, with or without | |
| * modification, are permitted provided that the following conditions are met: | |
| * * Redistributions of source code must retain the above copyright | |
| * notice, this list of conditions and the following disclaimer. | |
| * * Redistributions in binary form must reproduce the above copyright | |
| * notice, this list of conditions and the following disclaimer in the | |
| * documentation and/or other materials provided with the distribution. | |
| * * Neither the name of Freescale Semiconductor nor the | |
| * names of its contributors may be used to endorse or promote products | |
| * derived from this software without specific prior written permission. | |
| * | |
| * | |
| * ALTERNATIVELY, this software may be distributed under the terms of the | |
| * GNU General Public License ("GPL") as published by the Free Software | |
| * Foundation, either version 2 of that License or (at your option) any | |
| * later version. | |
| * | |
| * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY | |
| * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED | |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
| * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY | |
| * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES | |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; | |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND | |
| * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT | |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS | |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
| */ | |
| /include/ "p1023si-pre.dtsi" | |
| / { | |
| model = "fsl,P1023"; | |
| compatible = "fsl,P1023RDB"; | |
| #address-cells = <2>; | |
| #size-cells = <2>; | |
| interrupt-parent = <&mpic>; | |
| memory { | |
| device_type = "memory"; | |
| }; | |
| reserved-memory { | |
| #address-cells = <2>; | |
| #size-cells = <2>; | |
| ranges; | |
| bman_fbpr: bman-fbpr { | |
| size = <0 0x1000000>; | |
| alignment = <0 0x1000000>; | |
| }; | |
| qman_fqd: qman-fqd { | |
| size = <0 0x400000>; | |
| alignment = <0 0x400000>; | |
| }; | |
| qman_pfdr: qman-pfdr { | |
| size = <0 0x2000000>; | |
| alignment = <0 0x2000000>; | |
| }; | |
| }; | |
| qportals: qman-portals@ff000000 { | |
| ranges = <0x0 0xf 0xff000000 0x200000>; | |
| }; | |
| bportals: bman-portals@ff200000 { | |
| ranges = <0x0 0xf 0xff200000 0x200000>; | |
| }; | |
| soc: soc@ff600000 { | |
| ranges = <0x0 0x0 0xff600000 0x200000>; | |
| i2c@3000 { | |
| eeprom@53 { | |
| compatible = "at24,24c04"; | |
| reg = <0x53>; | |
| }; | |
| rtc@6f { | |
| compatible = "microchip,mcp7941x"; | |
| reg = <0x6f>; | |
| }; | |
| }; | |
| usb@22000 { | |
| dr_mode = "host"; | |
| phy_type = "ulpi"; | |
| }; | |
| }; | |
| lbc: localbus@ff605000 { | |
| reg = <0 0xff605000 0 0x1000>; | |
| /* NOR, NAND Flashes */ | |
| ranges = <0x0 0x0 0x0 0xec000000 0x04000000 | |
| 0x1 0x0 0x0 0xffa00000 0x08000000>; | |
| nor@0,0 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "cfi-flash"; | |
| reg = <0x0 0x0 0x04000000>; | |
| bank-width = <2>; | |
| device-width = <1>; | |
| partition@0 { | |
| /* 48MB for Root File System */ | |
| reg = <0x00000000 0x03000000>; | |
| label = "NOR Root File System"; | |
| }; | |
| partition@3000000 { | |
| /* 1MB for DTB Image */ | |
| reg = <0x03000000 0x00100000>; | |
| label = "NOR DTB Image"; | |
| }; | |
| partition@3100000 { | |
| /* 14MB for Linux Kernel Image */ | |
| reg = <0x03100000 0x00e00000>; | |
| label = "NOR Linux Kernel Image"; | |
| }; | |
| partition@3f00000 { | |
| /* This location must not be altered */ | |
| /* 512KB for u-boot Bootloader Image */ | |
| /* 512KB for u-boot Environment Variables */ | |
| reg = <0x03f00000 0x00100000>; | |
| label = "NOR U-Boot Image"; | |
| read-only; | |
| }; | |
| }; | |
| nand@1,0 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "fsl,elbc-fcm-nand"; | |
| reg = <0x1 0x0 0x40000>; | |
| partition@0 { | |
| /* This location must not be altered */ | |
| /* 1MB for u-boot Bootloader Image */ | |
| reg = <0x0 0x00100000>; | |
| label = "NAND U-Boot Image"; | |
| read-only; | |
| }; | |
| partition@100000 { | |
| /* 1MB for DTB Image */ | |
| reg = <0x00100000 0x00100000>; | |
| label = "NAND DTB Image"; | |
| }; | |
| partition@200000 { | |
| /* 14MB for Linux Kernel Image */ | |
| reg = <0x00200000 0x00e00000>; | |
| label = "NAND Linux Kernel Image"; | |
| }; | |
| partition@1000000 { | |
| /* 96MB for Root File System Image */ | |
| reg = <0x01000000 0x06000000>; | |
| label = "NAND Root File System"; | |
| }; | |
| partition@7000000 { | |
| /* 16MB for User Writable Area */ | |
| reg = <0x07000000 0x01000000>; | |
| label = "NAND Writable User area"; | |
| }; | |
| }; | |
| }; | |
| pci0: pcie@ff60a000 { | |
| reg = <0 0xff60a000 0 0x1000>; | |
| ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 | |
| 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; | |
| pcie@0 { | |
| /* IRQ[0:3] are pulled up on board, set to active-low */ | |
| interrupt-map-mask = <0xf800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x0 */ | |
| 0000 0 0 1 &mpic 0 1 0 0 | |
| 0000 0 0 2 &mpic 1 1 0 0 | |
| 0000 0 0 3 &mpic 2 1 0 0 | |
| 0000 0 0 4 &mpic 3 1 0 0 | |
| >; | |
| ranges = <0x2000000 0x0 0xc0000000 | |
| 0x2000000 0x0 0xc0000000 | |
| 0x0 0x20000000 | |
| 0x1000000 0x0 0x0 | |
| 0x1000000 0x0 0x0 | |
| 0x0 0x100000>; | |
| }; | |
| }; | |
| board_pci1: pci1: pcie@ff609000 { | |
| reg = <0 0xff609000 0 0x1000>; | |
| ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 | |
| 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; | |
| pcie@0 { | |
| /* | |
| * IRQ[4:6] only for PCIe, set to active-high, | |
| * IRQ[7] is pulled up on board, set to active-low | |
| */ | |
| interrupt-map-mask = <0xf800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x0 */ | |
| 0000 0 0 1 &mpic 4 2 0 0 | |
| 0000 0 0 2 &mpic 5 2 0 0 | |
| 0000 0 0 3 &mpic 6 2 0 0 | |
| 0000 0 0 4 &mpic 7 1 0 0 | |
| >; | |
| ranges = <0x2000000 0x0 0xa0000000 | |
| 0x2000000 0x0 0xa0000000 | |
| 0x0 0x20000000 | |
| 0x1000000 0x0 0x0 | |
| 0x1000000 0x0 0x0 | |
| 0x0 0x100000>; | |
| }; | |
| }; | |
| pci2: pcie@ff60b000 { | |
| reg = <0 0xff60b000 0 0x1000>; | |
| ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 | |
| 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; | |
| pcie@0 { | |
| /* | |
| * IRQ[8:10] are pulled up on board, set to active-low | |
| * IRQ[11] only for PCIe, set to active-high, | |
| */ | |
| interrupt-map-mask = <0xf800 0 0 7>; | |
| interrupt-map = < | |
| /* IDSEL 0x0 */ | |
| 0000 0 0 1 &mpic 8 1 0 0 | |
| 0000 0 0 2 &mpic 9 1 0 0 | |
| 0000 0 0 3 &mpic 10 1 0 0 | |
| 0000 0 0 4 &mpic 11 2 0 0 | |
| >; | |
| ranges = <0x2000000 0x0 0x80000000 | |
| 0x2000000 0x0 0x80000000 | |
| 0x0 0x20000000 | |
| 0x1000000 0x0 0x0 | |
| 0x1000000 0x0 0x0 | |
| 0x0 0x100000>; | |
| }; | |
| }; | |
| }; | |
| /include/ "p1023si-post.dtsi" |