| /* | |
| * P2020 RDB Device Tree Source | |
| * | |
| * Copyright 2009-2012 Freescale Semiconductor Inc. | |
| * | |
| * This program is free software; you can redistribute it and/or modify it | |
| * under the terms of the GNU General Public License as published by the | |
| * Free Software Foundation; either version 2 of the License, or (at your | |
| * option) any later version. | |
| */ | |
| /include/ "p2020si-pre.dtsi" | |
| / { | |
| model = "fsl,P2020RDB"; | |
| compatible = "fsl,P2020RDB"; | |
| aliases { | |
| ethernet0 = &enet0; | |
| ethernet1 = &enet1; | |
| ethernet2 = &enet2; | |
| serial0 = &serial0; | |
| serial1 = &serial1; | |
| pci0 = &pci0; | |
| pci1 = &pci1; | |
| }; | |
| memory { | |
| device_type = "memory"; | |
| }; | |
| lbc: localbus@ffe05000 { | |
| reg = <0 0xffe05000 0 0x1000>; | |
| /* NOR and NAND Flashes */ | |
| ranges = <0x0 0x0 0x0 0xef000000 0x01000000 | |
| 0x1 0x0 0x0 0xffa00000 0x00040000 | |
| 0x2 0x0 0x0 0xffb00000 0x00020000>; | |
| nor@0,0 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "cfi-flash"; | |
| reg = <0x0 0x0 0x1000000>; | |
| bank-width = <2>; | |
| device-width = <1>; | |
| partition@0 { | |
| /* This location must not be altered */ | |
| /* 256KB for Vitesse 7385 Switch firmware */ | |
| reg = <0x0 0x00040000>; | |
| label = "NOR (RO) Vitesse-7385 Firmware"; | |
| read-only; | |
| }; | |
| partition@40000 { | |
| /* 256KB for DTB Image */ | |
| reg = <0x00040000 0x00040000>; | |
| label = "NOR (RO) DTB Image"; | |
| read-only; | |
| }; | |
| partition@80000 { | |
| /* 3.5 MB for Linux Kernel Image */ | |
| reg = <0x00080000 0x00380000>; | |
| label = "NOR (RO) Linux Kernel Image"; | |
| read-only; | |
| }; | |
| partition@400000 { | |
| /* 11MB for JFFS2 based Root file System */ | |
| reg = <0x00400000 0x00b00000>; | |
| label = "NOR (RW) JFFS2 Root File System"; | |
| }; | |
| partition@f00000 { | |
| /* This location must not be altered */ | |
| /* 512KB for u-boot Bootloader Image */ | |
| /* 512KB for u-boot Environment Variables */ | |
| reg = <0x00f00000 0x00100000>; | |
| label = "NOR (RO) U-Boot Image"; | |
| read-only; | |
| }; | |
| }; | |
| nand@1,0 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "fsl,p2020-fcm-nand", | |
| "fsl,elbc-fcm-nand"; | |
| reg = <0x1 0x0 0x40000>; | |
| partition@0 { | |
| /* This location must not be altered */ | |
| /* 1MB for u-boot Bootloader Image */ | |
| reg = <0x0 0x00100000>; | |
| label = "NAND (RO) U-Boot Image"; | |
| read-only; | |
| }; | |
| partition@100000 { | |
| /* 1MB for DTB Image */ | |
| reg = <0x00100000 0x00100000>; | |
| label = "NAND (RO) DTB Image"; | |
| read-only; | |
| }; | |
| partition@200000 { | |
| /* 4MB for Linux Kernel Image */ | |
| reg = <0x00200000 0x00400000>; | |
| label = "NAND (RO) Linux Kernel Image"; | |
| read-only; | |
| }; | |
| partition@600000 { | |
| /* 4MB for Compressed Root file System Image */ | |
| reg = <0x00600000 0x00400000>; | |
| label = "NAND (RO) Compressed RFS Image"; | |
| read-only; | |
| }; | |
| partition@a00000 { | |
| /* 7MB for JFFS2 based Root file System */ | |
| reg = <0x00a00000 0x00700000>; | |
| label = "NAND (RW) JFFS2 Root File System"; | |
| }; | |
| partition@1100000 { | |
| /* 15MB for JFFS2 based Root file System */ | |
| reg = <0x01100000 0x00f00000>; | |
| label = "NAND (RW) Writable User area"; | |
| }; | |
| }; | |
| L2switch@2,0 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "vitesse-7385"; | |
| reg = <0x2 0x0 0x20000>; | |
| }; | |
| }; | |
| soc: soc@ffe00000 { | |
| ranges = <0x0 0x0 0xffe00000 0x100000>; | |
| i2c@3000 { | |
| rtc@68 { | |
| compatible = "dallas,ds1339"; | |
| reg = <0x68>; | |
| }; | |
| }; | |
| spi@7000 { | |
| flash@0 { | |
| #address-cells = <1>; | |
| #size-cells = <1>; | |
| compatible = "spansion,s25sl12801", "jedec,spi-nor"; | |
| reg = <0>; | |
| spi-max-frequency = <40000000>; | |
| partition@0 { | |
| /* 512KB for u-boot Bootloader Image */ | |
| reg = <0x0 0x00080000>; | |
| label = "SPI (RO) U-Boot Image"; | |
| read-only; | |
| }; | |
| partition@80000 { | |
| /* 512KB for DTB Image */ | |
| reg = <0x00080000 0x00080000>; | |
| label = "SPI (RO) DTB Image"; | |
| read-only; | |
| }; | |
| partition@100000 { | |
| /* 4MB for Linux Kernel Image */ | |
| reg = <0x00100000 0x00400000>; | |
| label = "SPI (RO) Linux Kernel Image"; | |
| read-only; | |
| }; | |
| partition@500000 { | |
| /* 4MB for Compressed RFS Image */ | |
| reg = <0x00500000 0x00400000>; | |
| label = "SPI (RO) Compressed RFS Image"; | |
| read-only; | |
| }; | |
| partition@900000 { | |
| /* 7MB for JFFS2 based RFS */ | |
| reg = <0x00900000 0x00700000>; | |
| label = "SPI (RW) JFFS2 RFS"; | |
| }; | |
| }; | |
| }; | |
| usb@22000 { | |
| phy_type = "ulpi"; | |
| dr_mode = "host"; | |
| }; | |
| mdio@24520 { | |
| phy0: ethernet-phy@0 { | |
| interrupts = <3 1 0 0>; | |
| reg = <0x0>; | |
| }; | |
| phy1: ethernet-phy@1 { | |
| interrupts = <3 1 0 0>; | |
| reg = <0x1>; | |
| }; | |
| tbi-phy@2 { | |
| device_type = "tbi-phy"; | |
| reg = <0x2>; | |
| }; | |
| }; | |
| mdio@25520 { | |
| tbi0: tbi-phy@11 { | |
| reg = <0x11>; | |
| device_type = "tbi-phy"; | |
| }; | |
| }; | |
| mdio@26520 { | |
| status = "disabled"; | |
| }; | |
| ptp_clock@24e00 { | |
| fsl,tclk-period = <5>; | |
| fsl,tmr-prsc = <200>; | |
| fsl,tmr-add = <0xCCCCCCCD>; | |
| fsl,tmr-fiper1 = <0x3B9AC9FB>; | |
| fsl,tmr-fiper2 = <0x0001869B>; | |
| fsl,max-adj = <249999999>; | |
| }; | |
| enet0: ethernet@24000 { | |
| fixed-link = <1 1 1000 0 0>; | |
| phy-connection-type = "rgmii-id"; | |
| }; | |
| enet1: ethernet@25000 { | |
| tbi-handle = <&tbi0>; | |
| phy-handle = <&phy0>; | |
| phy-connection-type = "sgmii"; | |
| }; | |
| enet2: ethernet@26000 { | |
| phy-handle = <&phy1>; | |
| phy-connection-type = "rgmii-id"; | |
| }; | |
| }; | |
| pci0: pcie@ffe08000 { | |
| reg = <0 0xffe08000 0 0x1000>; | |
| status = "disabled"; | |
| }; | |
| pci1: pcie@ffe09000 { | |
| reg = <0 0xffe09000 0 0x1000>; | |
| ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 | |
| 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; | |
| pcie@0 { | |
| ranges = <0x2000000 0x0 0xa0000000 | |
| 0x2000000 0x0 0xa0000000 | |
| 0x0 0x20000000 | |
| 0x1000000 0x0 0x0 | |
| 0x1000000 0x0 0x0 | |
| 0x0 0x100000>; | |
| }; | |
| }; | |
| pci2: pcie@ffe0a000 { | |
| reg = <0 0xffe0a000 0 0x1000>; | |
| ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 | |
| 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; | |
| pcie@0 { | |
| ranges = <0x2000000 0x0 0x80000000 | |
| 0x2000000 0x0 0x80000000 | |
| 0x0 0x20000000 | |
| 0x1000000 0x0 0x0 | |
| 0x1000000 0x0 0x0 | |
| 0x0 0x100000>; | |
| }; | |
| }; | |
| }; | |
| /include/ "p2020si-post.dtsi" |